Waiting patiently for a 139qmb EFI kit ❤️

The best customer service ever, I ordered some parts and ended up having mismatched Parts also got the privilege to talk to Matt himself. Thank you for helping me. Made my day when you picked up the phone

Matt!!!! I know you guys are constantly creating the future for scoots. I have been watching and waiting with this money burning a hole in my pocket for this EFI setup. Could you do a fan base update regarding the status or release of EFI 2.0? YOU GUYS ROCK. Keep doing what your doing. We all appreciate it.

Yessir 🔥🔥🔥, on the ready to place that order as soon as it's in production

Coolest thing I've seen in a while, the ruckus has such a grande community.

That is such a clean set up for bars... Love that led speedo

Really cool I wish I could put one on the 90cc

Looks ready, hope Honda partners with you, Matt for any future contract work. :)

Found you channel by accident But love your content! I’m a recent big bike seller after a couple decades of riding. I’ve always had an affinity toward “ scooters “ I’m into building a GY6 RUK!

Just waiting for the EFI kits to get back in stock so I can get ahold of one or a few.

Never seen one of these contraptions before ‼️ Looks like something I could get into ✌🏼

An EFI kit for the XR150L would be awesome!!

I have a nibbi carb and it’s nice took away the back fire insane throttle response and I just put bigger jets and she moves

Yessir making progress 🔥🔥🔥

Missed it. Hopefully u guyz r WELL‼️⚠️❕🔥🆒️☮

Got a few questions, contemplating getting an Icebear Maddog 150 trike. Assuming that this will work on that, will you have a kit with everything (alarm/everything) available? Also if I were to later buy and install the 171cc kit from you as well would I need to do anything to make the EFI/everything work with that?

So excited for the EFI...

audible blinking sounds plus low fuel lights practical🫰

Hi I'm new here. Is there a breakdown of this build? Stance etc is perfect.

Nice custom build I have built a bicycle and it was not easy. Where is the fuel tank on this motor 😅?

I cannot wait!!

So excited where do I pre-order don't want to miss out on this batch !

I would love to get this for my Honda CN250 if you ever offered that!

🔥yes🔥

That's crazy

10 month check in! Do you think we'll see the kit this summer? I'll probably need two.

Hello, can you make a version of this motorcycle that can be ridden by two people? Maybe a little thinner rubber.

I think I will just buy the 26mm natural carburetor when it comes back in stock, only because it is cheaper and easier to install.

Gonna need one of these for a 150cc and do you have any ECU's toud recommend to make a chinese efi system work a bit better? Vitacci clash 200 with a LF161QMB

Still aiming for the $595 price tag on the plug and play efi?

i want one in a trike version. Black in color.

The controls and grips are from? I have that headlight and bracket. The light sucks but the bracket is badass.

Can't wait

So I just replaced my carb on my helix 150 because I couldn't rev it up without it just totally falling on its face.. Well, it's still doing the same thing practically.. I tried the air fuel screw but still falls straight on its face when I try to rev it or drive it...I put a new coil and plug on it.. please HELP 😢

Is there a way I can tune my clash 200 EFI Gy6 scooter engine? I need to tune the ECU from revving itself up to 3000 RPM every time I rev up the bike and same thing when im slowing to a stop. My gess is after i rev it up the fuel injector is shooting to much fuel when it’s revving down causing it to rev up again burning of the extra fuel so the engine won’t stall out, and the engine smells like a smokey rich smell. Since it’s a Gy6 EFI ECU engine, would you have any advise on how I can go about and fixing the AFR is there a software that works as there is no information on how to go about and turning Gy6 engines.

I can’t wait

ehh i have a 50cc gy6 with 12inch wheels. What size belt do i need for it? 729mm?

Will the efi kit require the probld harness/app? Or will there be a stand alone gy6 150cc+ version? I have a chuckus trike and not looking to reinvent the wheel for efi

What do I need to order from you to pur a fatty wheel on my 2008 honda ruckus Thank you

Curious if it's possible to buy that said cap now? I've got a dio I'm working on and the mikuni pump on it pumps past the float stop. So it continues to overflow the carb. It's a common thing on these 2/3 models. So having the overflowed Fuel just return back into the top fuel cap.

I'm all about this for a qmb139. Also those handle bar blinkers are dope!

Hey, please help me. I have a 137qmb-3a. It is the same as the 139? Because I want to buy the naraku 90cc 139Qmb

Hey Matt! Just wondering if you have a guide or something on how to remap a stock Chinese EFI for the GY6? I recently bought a 150 cc GY6 scoot with EFI preinstalled for around $1,500. However I feel it's chugging a whole lot more fuel than it should, and I was told that like any Chinese EFIs, they are locked at 100kph max.

Good shit

no case on the phone is a crazy opinion.

Nice

Can you recommend what gear up kit I need for 50 cc maddog with 100 cc big bore kit

Hey about the Honda Ruckus EVI? Will that work for the Metropolitan since they're the same motor?

I'm looking to do a GY6 swap from a stock GET Ruckus. Will this EFI harness be a thing you can do at the time of a swap to avoid buying extra stuff right off the bat that you'll end up replacing anyway?

Can I buy this ruckus from you? This is so amazing! Hope you have a wonderful week ahead

Do you know if the Ruckus only came as a 50cc..?

What is the app/hardware combo that is letting you use your phone to control the ruck?

Dang you not sharing where you bought these!!!! 😢I want some for mine.

You need carry spare fuel bottle incase run low! Mr Matt 🍻

Okay I saw your video with the bobbed out ruckus and I started building my own. My handle bars are too tall for the stock cables and I was wondering if there was a way to get longer cables. Brake cables and sensor cables and such. Thanks! Bless you!

Incredible acceleration😅

Why has no one built bars thick enough to hide wires?

Top speed?

waiting for the EFI kit

I just bought a gy6 clone golf cart (Vittaci Rover 200 EFI) and it’s struggling climbing hills. What should I do? Thanks

Do you offer international shipping??

Any updates on when the EFI kit will be released?

When are you stocking on the EFI system

Can you still put a kick start?

Please want one so bad

What's the top speed 38.5 mph ?

can you put these on a metro?

this is gonna be a full harness? or will it tap into factory ruck harness?

What's top speed

Is it based on speeduino?

When it will be available?

The e-ruck is all I’m waiting for!!! The rest is outdated

And can u deleatvrrd it to me all ready put togeather and speaker and blue tooth spearker and I am looking about sixteen hurndread filler me and my brother we was part owners that my uncial had left us and my aunt sold it we begetting it in afreday I hope and u let u no when we gettit we got a letter on ther other day as hounten be to much longer

I need more speed

That’s how fast I won’t mine to go a bub I need some help on something u can hook up some speacker and blue tooth speker on them but I Doint no which one to get or hook it up arr they any way that u fan out the scoter togeather and the speaker and blue tooth to geather and I need to no how much I am frieand to let any bodey work on it around her frieand they would terry it up n me and free deleavere and I lick to have a tool set with it and a gas led that look up on and how much but I seed that the one I won’t it cause to get it sixhurnderad and nine six filler blue one with the flat seat onit

A bub I seed on her wall go I seed that it got up to ginesix mils phwer

Dam i might sell my Harley NOT.

Overpriced for the platform. Cheaper to put in a more powerful engine.

Watch out Tesla!!!!

Flipper zero...

Can i do this with my df 200sst I would live to make it EFI

You guys got an EFI kit for 157qmj?

I put a 100cc big bore kit that sat for a year maybe before I ran it. And the oil disappears from the dipstick when I run it. Then it comes back from (somewhere)?