No video
Hafco BS5V Band saw Review & Mods
Рет қаралды 598
2 ай бұрынReview & Modifications to the Hafco (Hare & Forbes) BS5V Portable Band saw after 5 years of ownership.
Link to the Blade Extender on Ebay: bit.ly/3VptGtr
Link to the Blade Extender on my Website: bit.ly/4e1LZft
If you find my Content Helpful & would like to Buy Me A Beer, please do so, at the Link below.
Beer Money for The Aussie Shed,. Paypal: tinyurl.com/y6...
My Website that Carries some of the Parts I make. www.upperhandp...
Follow Me on
Facebook / theaussieshedd
Facebook www.facebook.c...
#theaussieshed #z32 #fairladyz #projectfairlady
@freedomisntfreee 2 ай бұрын
Mate you're a Godsend. I've had the exact same problem since buying this saw. Couldn't work out WTF was going on with it. I'll go grab one from your website right now. Thanks so much for this.👍👍👍
@TheAussieShed 2 ай бұрын
Pleasure Mate, yes it took me ages to work it out, I was even thinking about getting rid of it. So glad I didn't. Cheers. Oh and thanks for the purchase.
@JoshuaStacey782 2 ай бұрын
I'll have to grab one as well, I thought it was an operator error for me... The challenge I've got with mine is the vise cracked and after attempting to weld it back it's no longer square.
@theenduropest 10 күн бұрын
Been a good saw for me for years but rhe blade slipping and breakages does my head in also! Must give this a go 👌
@codasinmurry 2 ай бұрын
Good info Gary you have nailed it again 👍
@TheAussieShed 2 ай бұрын
Thanks Gary👍
@josecarreira8934 27 күн бұрын
Thinking on buying one of those band saws better than cutting with the grinder throwing sparks all over the place 👍
@CraigLYoung 2 ай бұрын
Thanks for sharing 👍
@TheAussieShed 2 ай бұрын
Cheers Craig.
@scod3908 2 ай бұрын
Been running the bigger BS6V, haven't cut stainless but done 50+ cuts on RHS without issue, 50x50x3 up to 150x50x4 . Works great for a neat and accurate angled cut on wood table+chair legs too ;) Was told to only run bimetal blades in it as it runs without cooling, anecdotal only. I'm still on the original blade and haven't tried my bimetal spare blade as of yet. Perhaps I should save that one for cutting stainless and use their standard blades?
@TheAussieShed 2 ай бұрын
G'day Mate, if it were me i'd stick with the Carbon Blade you're currently running. Cooling has only been an issue when cutting solid sections. From my understanding the BS6V isn't as prone to the Blade Fatigue problems experienced with the BS5V. Thanks for the comment. Cheers.
@scod3908 2 ай бұрын
@@TheAussieShed Indeed, the (longer) blade is barely warm to the touch after cutting a large RHS section. I also ran the blade in slow, and generally cut on the slow side. I'm not a machinist and have not had reason to cut any large solid sections, just a few shafts
Auto Expert John Cadogan
Рет қаралды 20 М.
Detailed Steering Rack Rebuild, Part 1(with part numbers) The Nissan Z32 300zx Twin Turbo Mega Build
The Aussie Shed
Рет қаралды 753
Kevin's Fix-it or Make-it Shop
Рет қаралды 10 М.