🛠 Mythbusting: Which is more important Air-Fuel Ratio OR Ignition Timing?

Рет қаралды 137,192

Күн бұрын

#afr #enginetuning #haltech
This is something you need to know if you're chasing horsepower - which is more important - AFR or Ignition Timing? Today we are going to tackle this hotly debated topic the proper way - with a test vehicle, a chassis dyno, and some hardcore theory thrown in. Strap yourselves in - it's gonna be a bumpy ride!
Read the website article here: www.haltech.com/ignition-timi...
Got a topic you'd like us to cover? Leave it in the comments section!
.
Shortcuts:
00:00 Intro
00:40 Experiment Overview
01:44 Dyno pulls - Round 1
02:30 Round 1 results explained
03:50 What AFR does
07:20 Stoichiometric AFR
09:30 Why AFR doesn't produce more power
11:10 Dyno pulls - Round 2
11:50 Round 2 results explained
13:55 The Verdict
-----------------------------------------------------------
Liked this video? Here are more like it:
Volumetric Efficiency Explained: • 🛠 Tuning with Volumetr...
Volumetric Efficiency Tuning: • 🛠 Volumetric Efficienc...
Nitrous Injection Explained: • 🛠 Nitrous Oxide - Gett...
------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~

Пікірлер: 231

@cbdrift 2 жыл бұрын

Aussie channel : "the crank bone is connected to the .......... Burnouts!" - well i cant argue with that one :)

@MotoringBoxTV 2 жыл бұрын

"Skip the foreplay and straight to the meat..." that's why we love you guys ❤

@Knackersjewels 2 жыл бұрын

My tuner was teaching me the basics of tuning. He said "Power Enrichment doesn't add fuel to make power, it adds fuel _because_ it's making power"

@quickcinema8031 4 ай бұрын

@akinorhan4671 for cooling, upgrade your cooling system, not adding more fuel

@kornshadow097 6 күн бұрын

Close. It's adding fuel because it's burning more air. Hence why one way to boost power isn't to flood the engine with fuel, it's to use forced induction to force more AIR. People think nitrous is a super fuel.... It's not a fuel at all.. It's just inert gas mixed with double the molecules of more air. Which coops the rest of the air around it and adds more dense air.

@Knackersjewels 6 күн бұрын

@@kornshadow097 it isn't burning more air in a n/a setup though.

@shotamakarashvili3714 5 күн бұрын

Not two molecules of air but oxygen. That's what helps to oxidize hydrocarbons and extract energy from that chemical process.

@Old-n-slo-locked-n-leaned 2 жыл бұрын

The best and most straightforward explanation of AFR vs. timing.

@BIGGELATO 2 жыл бұрын

Its always remembering that a 6000RPM rotates 100 times a second, and knowing there are cars with 10k rpm, bikes with 15-17k rpm, still pretty crazy till this day

@dxrkout5677 2 жыл бұрын

Nothing less from Haltech! You guys know how to present concepts simplistic and right on the head. Much love and respect, keep it up!

@haltech 2 жыл бұрын

Thanks for the feedback:)

@grahamparsons1070 9 ай бұрын

Took the words right out of my mouth 👌

@jacquescrusan9500 2 жыл бұрын

Old saying from my dad: "Time for torque, then jet for power." I always took it to mean that ignition timing is your rough groom that you do first, then changing the fueling is the fine groom to add finesse to the curve to finish optimizing. If you think about it, ignition timing more directly affects the timing of peak cylinder pressure in relation to crankshaft position than fueling. And cylinder pressure should be one of the main objectives for making power.

@jacquescrusan9500 2 жыл бұрын

I guess the purpose of his statement is that fueling doesn't have to be spot on at first to get within the ballpark. So it makes more sense to adjust the timing first with safe (albeit rich) afr's and build up the torque curve. Once that's done, trim the fuel to fine-tune the curve and keep temperatures in the green band. I've seen others take the opposite approach and it seems to trend towards taking longer to achieve a similar result.

@huss9796 2 жыл бұрын

Awesome coverage on a commonly asked topic! Thank you! Would love to see more in depth videos based on Rotary tuning !

@BEYTEK 2 жыл бұрын

this guy is very entertaining to watch! and very knowlageable

@KHIJAPAN 2 жыл бұрын

Perfect!! You helped me a lot, answering my question before I even ask you :)) Of course I watched some of your videos before and some from other reputable Australian companies.

@ciutarobert12 2 жыл бұрын

Great video, defiantly the best explanation out there. Many thanks once again!

@dlmperformanceandracing 2 жыл бұрын

Defiantly or Definitely?

@SooperKewl Ай бұрын

Great video. Really pulls AFR and timing concepts together.

@TurboHappyCar Жыл бұрын

Fantastic video, thanks for doing these! 👍

@Mineratron 10 ай бұрын

Simple, clear and entertaining. Enjoyed that. 😄👌🍻

@dwolrdcojp 2 жыл бұрын

Great explanation and the best engine management!

@haltech 2 жыл бұрын

Let's settle this once and for all: Which is more important when tuning for power - AFR or Ignition Timing? Today we are going to tackle this hotly debated topic the proper way - with a test vehicle, a chassis dyno, and some hardcore theory thrown. Strap yourselves in - it's gonna be a bumpy ride! Read the website article here: www.haltech.com/ignition-timing-vs-air-to-fuel-ratio/ ----------------------------------------------------------- Liked this video? Here are more like it: Volumetric Efficiency Explained: kzfaq.info/get/bejne/e59mpaV638DDo3k.html Volumetric Efficiency Tuning: kzfaq.info/get/bejne/q7aafLZquc2cY4E.html Nitrous Injection Explained: kzfaq.info/get/bejne/g8tpoc-a3rfSeIE.html -------------------------------------------------------- Don't miss out on our next video - subscribe to our channel. -------------------------------------------------------- For more Haltech goodness check out our: Website: www.haltech.com Facebook: facebook.com/HaltechEngineManagement Instagram: instagram.com/haltechecu

@Phantom-mk4kp 10 ай бұрын

I believe the goal is for peak cylinder pressure at 18-20⁰ ATDC. There is a spark plug available that has a piezoelectric sensor that measures peak pressure

@doncarlson8391 2 жыл бұрын

Maximum mechanical advantage is when the con rod is 90 degrees to the rod journal. Depending on rod length this may be when the ctank is more like 84 degrees after TDC not 90 degrees. Nice demonstration of timing vs afr. BTW, measuring egts and their relationship would be interesting.

@kieranplowright7932 Ай бұрын

❤ most informative explanation 😊 Thermal power and mechanical power, fuel, timing Makes so much sense now you put it like that, great vid.

@N1SMO32 2 жыл бұрын

That Falcon comes on boost *HARD*

@MartinMcMartin 2 жыл бұрын

I think like a caveman, AFR burns pistons, bad timing hammers bearings and throws conrods.

@haltech 2 жыл бұрын

Hey, you're not wrong so we won't argue:)

@lukeschannel650 Жыл бұрын

Well done! Best explanation ever. Keep ‘em comong

@bcr1818 2 жыл бұрын

Awesome video, i would love too see more of these. :D

@TURBOTRISTO 2 жыл бұрын

yet another great video!!

@xyzconceptsYT 2 жыл бұрын

Well done lads!

@UzumakiGarage 2 жыл бұрын

Great explanation. Thanks Matt

@AngerIsAnEnergy 2 жыл бұрын

I'm glad you did this video. I have had my current Evo 8 for about 5 months and have been wondering if the previous owner's A/F setting was overly rich. I am pretty sure now that it is and when I get it re-tuned I plan to remedy this. I put out noticeably more black smoke than similar cars when wide open and am fairly certain I could dial it back a tad without killing my engine or sacrificing power.

@jamesford2942 Жыл бұрын

Nice explanation so far. Engines of different design parameters take different ignition timing due to the time it takes for the flame to burn across the cylinder.

@TurboS-gh5wc 2 жыл бұрын

These videos are highly appreciated thank you

@haltech 2 жыл бұрын

Thanks for the feedback:)

@DBatty 2 жыл бұрын

Excellent video 👌🏻

@baxrok2. 2 жыл бұрын

Well done. Thanks!

@Adrenalfix 2 жыл бұрын

really awesome and informative video, thankyou. I may investing in a haltech soon, just have to justify it :p

@GoldenSim27 5 ай бұрын

very informative thank you

@BjornFSE 2 жыл бұрын

Awesome, Good Work, Keep em Coming (More Advanced next? lol)

@antonamalfi Жыл бұрын

Nice explanation

@lukedrakogiannskis8386 Жыл бұрын

Amazing learnt heaps from this vid

@mikejarden3679 2 жыл бұрын

Top work really enjoyed the VE videos as well hopefully convert some tuners into the modern age. Could you do a video on the importance of injector data/dead times. I have a mainline dyno too and recently noticed there is a tool in the software for injector deadtimes but iv never used it would be cool to see how that works. I do have a injector flow bench and a scope but its a lot to just check if the data you have is right or wrong. I tuned a f6 g6e the other day and managed to get 390kw only mod was a new dump pipe but maxed out fuel system so i put some new injectors and fuel pump in.

@mikeymasi 2 жыл бұрын

Great stuff cheers

@Andersljungberg 25 күн бұрын

If you question it, you can ask the question what was the octane value in MON. When you performed the test. And the horsepower and torque at lower rpm can be interesting for some people

@johnnydoodles88 2 жыл бұрын

Top Vid man.

@simonschmidt7327 2 ай бұрын

Good stuff

@ericn7698 2 жыл бұрын

I like this Matt guy. He's very knowledgeable about EFI tuning. Maybe he should go work for an aftermarket ECU manufacturer...

@martinrodger9565 2 жыл бұрын

🤔 Matt introduces by saying his last vid was VE. I thought that was Scotty… Matt and Scotty are never seen on camera together… Matt could fit into a Scotty suit but Scotty couldn’t fit into a Matt suit… WHAT HAS MATT DONE WITH THE TUNING FORK?! 😬

@haltech 2 жыл бұрын

Matt has done VE Part 1 and Scott has done Part 2. But you're right, we've never seen them on camera together.... queue suspenseful music 🤔

@haltech 2 жыл бұрын

Your cue will be the sound of suspenseful musing being queued. Just watch out for that reversing beep:)

@TheJamesLykins 2 жыл бұрын

Great sounding Ute

@haltech 2 жыл бұрын

It is:)

@Terribleguitarist89 2 жыл бұрын

I'm so envious of the Holden's and cool stuff y'all get down there... I want a ute :(

@hyper8545 2 жыл бұрын

Thanks

@TurbineResearch 2 жыл бұрын

Well done lads

@haltech 2 жыл бұрын

Thanks:)

@wailingalen Жыл бұрын

That hair and makeup moment was perfect 😂 👍

@ShredCulture 2 жыл бұрын

Another thing to consider is the effect that lambda has on laminar flame speed. It has been shown that any ratio richer or leaner than .90 lambda (roughly 13.2:1) will exhibit a slower flame speed. This means when the lambda is varied with fixed ignition timing, the point of maximum cylinder pressure will be at different locations.

@discipleoftheword1785 10 ай бұрын

Thank you

@jasonc950 2 жыл бұрын

Fair dinkum fantastic info, it explains why a VF GTS is also rich up top stock and why it is lethal on a cold morning when the timing is not retarded, thanks so much for a absolutely fantastic 15min of knowledge now understanding the horror stories heard personally about melting pistons, blown new engines and popping ring gaps all due to poor tuning chasing numbers for a $ tune, cheers

@bryanne274 2 жыл бұрын

Yall having too much fun explaining car stuff... 🚗 KEEP AT IT 🤳💅

@whitewalker9622 2 жыл бұрын

So how do you make a car drink the most less amount of fuel? Great ep!

@npharkes 2 жыл бұрын

I would LOVE to see you turn DOWN the boost so you can UP the timing - and compare that for power! Thanks!

@marlo0oty213 Жыл бұрын

The forbidden theory 😂

@martykath4427 9 ай бұрын

Take a look at Banks power clips.

@Bacongrease00 5 ай бұрын

Generally safer to make power with more boost and less timing. Timing is great until it’s not and you open your wallet. All it takes is one bad fill up of petrol and an aggressive timing curve to relocate the piston ring lands

@whatsreallygoingon253 2 жыл бұрын

Man id love to have a turbo falcon you Aussies get all the cool cars

@redteam77 10 ай бұрын

9k RPM going to 150 RPM per Sec is right for 2 stroke. But 4 stroke which the Ford runs is 75 RPM/Sec as it fires the sparklers every second revolution. That's okay, I'm still watching and learning.

@mathewboyd3746 2 жыл бұрын

I'd be interested to know how different the AFR & timing would typical be for an aircooled engine versus a water cooled. Air cooled has an extra challenge to managing heat in the combustion chamber I believe?

@andiszile 2 жыл бұрын

One could use EGT to fine-tune AFR. That''s a way to get some idea of cylinder temperature. If EGT start to get too high, make it richer.

@shotamakarashvili3714 9 ай бұрын

How about AFR being too rich in combination with retarded ignition timing resulting in very high EGT? What is it going to tell you about combustion chamber temperature?

@Ismcoyote12 Жыл бұрын

Ignition advance is starting the burn earlier before Tdc though so technically the peak cylinder pressure would be closer to where cylinder volume is smallest .

@RaksasaMentawai 2 жыл бұрын

Nicely explained 💪👍

@haltech 2 жыл бұрын

Thanks. Glad you liked it:)

@bvward 2 жыл бұрын

Matt, for us in the 'States, could you talk about the stoichio-Imperial ratio? Gallon per cubic mile?

@233kosta Жыл бұрын

If you can spare the dyno runs, you can do some RSM to find the ideal relationship between the two.

@perpetualgrin5804 2 ай бұрын

I use 95 ron for more advance for my ' 380 '. She is a beauty.

@greybuckleton 2 жыл бұрын

Just laying the truth on fast and hard!

@mikejarden3679 2 жыл бұрын

Another quick question do you use bosch lsu or ntk o2 sensors? also do you use the dyno wideband controller or ecu data via CAN

@salloroc20 2 жыл бұрын

I almost spit my beer at 11:ish

@kornshadow097 6 күн бұрын

AFR = combustion goal. flame speed/spool vs cylinder pressure vs in cylinder cooling . Timing is more responsible for power but is limited by pre-ignition. Stoich (14.7:1) is nothing but an emissions figure.... FI gas cars run 14.7 for Stoich.. However E85 don't have that ratio, of course... But also DI gas engines still don't have that same ratio because it's a waste of fuel... Funny thing dynos always do but can destroy engines... Snap closed the throttle after a run. It's like whipping a towel at a piston rod. Yet it's an acceptable practice to make the chart look pretty. Lol.

@isidrosevier1125 Жыл бұрын

Should you change spark values at cruising speeds? Is there any benefit to doing so? Should they be changed on a big cam engine when using a high stall convertor? If max timing at WOT is 24 for my engine, but I'll see 40-41 when cruising. Should I lower those a few degrees?

@theungoliant9410 Ай бұрын

You can tune without a Dyno using vacuum numbers , at least for fuel economy.

@HidRomail 2 жыл бұрын

Nice information!! Next one up, would be good to understand how to make EGT's a bit lower ;)

@lockedinstreetracing6005 Жыл бұрын

Too much timing will separate the rods from the crank to little and it runs like a ford you have to find the sweet spot. I'm jk though this is a great video on afr and timing great video guys.

@Harvy500 Ай бұрын

Volumetric efficiency = brake horse power per litre/inches. Eg....car has 210bhp and is a 2.0ltr capacity. V/E for that car = 105 bhp per litre.

@Brenton656 9 ай бұрын

I can’t believe you did a power run before all the fluids were warmed up 😂😂😂

@hfr_ford755 2 жыл бұрын

You wanna send one of those turbo Falcon utes over here to the U.S.? I need that car in my life

@Andersljungberg 25 күн бұрын

But then perhaps you should also talk about the oxygen content of the fuel. And the purpose of, for example, a turbo is to push more air into the engine

@sidecarbod1441 3 ай бұрын

At one end of the scale you have videos like this, then at the other end of the scale you have people that say 'twist the distributor until the engine knocks then back it off a couple of degrees' LOL

@wells2671 Жыл бұрын

Thanks for the great explanation, much appreciated!👍🏾 1 Question; If you dial in the fuel (AFR) throughout the RPM range first (using lower timing), and you then dial in the timing for more power, does the new timing change or affect the AFR that was previously set?

@ennpty Жыл бұрын

It shouldn't

@chevyno1740 Жыл бұрын

My understanding is that you should go back and check/readjust the A/F after ignition changes, as the characteristics of the burn will change. It may be subtle but it is there.

@DATONALKY 2 жыл бұрын

How flat are the Afr's on the dyno screen, nice work 👌

@wadoryujh 2 жыл бұрын

Great stuff, have a like just for the hair and makeup sketch

@haltech 2 жыл бұрын

Thnx, we'll take it!

@bikergobrrr 2 жыл бұрын

Fun video idea. Get a bunch of $300 wrecker barras and really push them with all the wrong things see what blows haha.

@777MAV 2 жыл бұрын

Why at 3:26 three graphs are in a strange order? 11.1 on top, 10.58 at the bottom and 11.7 is between them... Different axis? Also one of the graphs gave slower turbo spool, which one was that?

@eggsandbirds2520 2 жыл бұрын

Great job matt plan and simple to much details Could make it complicated. Question when will you be able to do a video on expansion modules For the elite series Unfortunately my 2500 is out of analog inputs need to expand my Ecu I noticed you still have the platinum series expansion modules will there be a release on a elite series expansion module or a updated version?

@eggsandbirds2520 2 жыл бұрын

Last will there be can bus switch panels for the elite series

@haltech 2 жыл бұрын

In the works as we speak:)

@HPRaceDevelopment 6 ай бұрын

The leverage arguement is wrong. Spark controls effective expansion ratio, and peak cyl pressure. It essentially controls compression ratio as well.

@thedobermangang3503 2 жыл бұрын

what is the best one to buy just rebuild my engine 5.7 1990 k5 blazer i got edelbrock carb on there i already have headers so the hole is there for the 02 sensor i converted it from tbi to carb.

@gavinivers8941 2 жыл бұрын

A very good video. If you want to know more, book your car in on Monday as the best answers come with a credit card number.....

@MrMajood1994 Жыл бұрын

Why we can’t adjust spark duration time on Haltech ECUs ??

@chippyjohn1 Жыл бұрын

I use steel pistons and sit around 14.25:1 Lambda at full load. Makes a huge difference for economy. Soon enough, steel pistons will be common. If all cars were hybrid and used engines that ran around a fix rpm, they would be so much more efficient. Being able to design all aspects of an engine to run around a narrow RPM range make it so much more efficient and simple. No need for VVT etc.

@supernice_auto Жыл бұрын

that sounds awful for racing.....

@mattkoh 28 күн бұрын

Can you do another one of these with an NA engine?

@MRMOPARMAN0426 2 жыл бұрын

The old saying, "ping is power". Myth confirmed.

@MRMOPARMAN0426 2 жыл бұрын

@Matt Wright that comes soon after

@Andersljungberg 25 күн бұрын

if you were to drive the car, for example, 1000 meters above sea level, the car would probably be more tired. For example, if you were to drive on the high roads that are in the vicinity of Mount Everest

@heavyweaponsguy21 2 жыл бұрын

Will Haltech look into free valve tuning? I know it is early days for the tech and very niche.

@haltech 2 жыл бұрын

Just like with everything - if there's enough demand for it, we'll make it:) At this point in time, like you said, it's a very small, niche market.

@heavyweaponsguy21 2 жыл бұрын

@@haltech thanks for the reply. Love your hoodies btw. Excellent quality.

@ecuperformance959 2 жыл бұрын

I prefer 10.5:1 because you can add more advance ...

@user9005 2 ай бұрын

I thought timing wasn't always set at peak torque but also removed as a cylinder pressure safe guard especially under boost?

@irukandji___ 2 жыл бұрын

Phew! All this talk about melting pistons. Thank Felix I am a Rotary Guy 🤣. #ApexSeals

@aoeden83 2 жыл бұрын

Would you generally play with cam phasing to determine max airflow before tinkering with spark and fuel tables?

@GarageItYourself 2 жыл бұрын

You'd have to do that in conjunction with modifying the VE table to see if you've actually changed the breathing capability of the motor. An engine is most efficient at a specific speed (RPM) which usually equates to it's maximum torque value and the cam phasing helps spread this peak point across a wider RPM band.

@sidecarbod1441 3 ай бұрын

All of the AFR's tested were on the rich side, try going leaner than 13:1, then the BHP will start to fall off a cliff edge! Basically the 'bell curve' for AFR is not symmetrical, the peak BHP will be at around 12.8:1 or somewhere close to that (maybe richer for turbo), go richer and the power drops a small amount, go leaner and the power drops a large amount. Someone has already posted up that peak cylinder pressure needs to occur somewhere around 18-20 degrees ATDC, the figure I've seen is around 14 ATDC which is in the same ballpark. the RPM AND the VE of the engine effects when the plug needs to fire in order to get peak cylinder pressure at the right point in time (number of degrees) ATDC. In simple terms as the RPM goes up we need to fire the plug sooner but also if the VE is low (throttle just cracked open) we also need to fire the plug sooner, if the throttle is on the floor the VE will go up and we need to pull out some timing. In the old days this was with vac-canisters. One 'expert' on youtube that runs a 2 stroke tuning shop was arguing with me that peak cylinder pressure needs to occur at TDC! (words fail me!). In fact 2 smokers prove how important the VE is with regards to ignition timing, they run a retard curve! This is because the VE is rubbish at low rpm but then at high rpm they 'come on the pipe', the VE can go over 100% hence pulling the timing back even though the rpm is high.

@wilwilson8146 7 ай бұрын

i luv u guys..

@mikenco 10 ай бұрын

I'm watching this better learn how to use the air and ignition retard levers on my 1929 Matchless T4. Great video, thank you.

@MrWyza1 2 жыл бұрын

Please more ignition videos! Rotary things!!

@azlisham4927 Жыл бұрын

Q.Which one u need? A.Both Afr more to engine healty and ignition if need horsepower increase.if horsepower increase then afr too lean..boooommmms your engine.😂😂 Good info trial testimony