Taking a look at a cool little offering out of Germany in .22LR! Thank you all for watching our channel!
Пікірлер: 45
@Oldspartan652 жыл бұрын
Finally someone who read the manual because if you take it apart further it voids the warranty
@Operator-fq2fn3 жыл бұрын
6500 rounds on my hammerli no issues just regular cleaning after each session.
@patricklawrence27553 жыл бұрын
ok, this vid was made last week. I picked up one of these yesterday...very well built, solid, not polymer/plastic like some others. and with that added weight, i would think it would help buffer the already smallish recoil that the rifle will have. Thank you for the breakdown.
@maverickgunworks87773 жыл бұрын
Thank you for your input! How are you liking it so far? Would like an update after you get it out on the range if you haven't already.
@teotwawki003 жыл бұрын
I'd enjoy plinking with one of those with my son. Excellent video as usual. Thank you very much. Be blessed. 🇺🇸 😇👍
@maverickgunworks87773 жыл бұрын
Thanks 👍
@guillermonarvaez75422 жыл бұрын
Have owned one for about a year. I like the rifle. Yes the trigger pull is heavy but H&K sells a 3 spring kit to lighten the pull. I installed them in mine and it did lighten the pull. Can't tell exactly how much. I don't own a trigger scale. The trigger group is my only complaint. It's a very solid rifle with a mostly plastic trigger group. But there are people who have shot thousands of rounds with no issues.
@franz.isler7993 жыл бұрын
Trigger pull gauge shows 7lbs. The take down pin isn't captive--so be careful about losing it (for disassembly). The rifle is designed for different velocities of .22lr ammo. The rifle prefers STANDARD VELOCITY OR HI-VELOCITY rimfire ammo, but if you want to use SUB-SONIC ammo (800 fpm), or HYPER-VELOCITY (1600 fpm), use a 4 mm ALLEN WRENCH to screw in the back of the bolt (5:50) to adjust the tension of the bolt spring. IT IS NOT A PRECISION FIREARM AS FAR AS TARGET GUNS ARE--it's just a good gun to have fun with, but shooting small game would probably a stretch because of the heavy trigger pull.
@Operator-fq2fn3 жыл бұрын
Trigger pull isnt that bad felt worse .
@texaspatriot91532 жыл бұрын
I changed the trigger springs for a lighter trigger pull on mine and it's a absolute tack driver with regular bulk pack ammo I put a 4x scope on it and I love it!!
@kchez55862 жыл бұрын
@@texaspatriot9153 Same here - the HK spring upgrade dropped mine 2 1/4 lbs
@texaspatriot91532 жыл бұрын
@@kchez5586 Worth every penny
@anthonymartin8769 Жыл бұрын
@@Operator-fq2fn People are so intimidated by the trigger. This is a great firearm and the trigger is ok by me.
@jeffreyrobertson76523 жыл бұрын
Nice looking 22 Stay Safe 🇺🇸🇺🇸
@maverickgunworks87773 жыл бұрын
Thank you and you as well.
@sdriza Жыл бұрын
beautiful gun
@paulstone472 Жыл бұрын
I bought one of these. Sold it and bought a Timmerman M4 22. I notice you didn't show how to remove the bolt for cleaning. That's because it's the pits to do. The Timmerman disassembles exactly like an AR, in all respects, and the bolt lock actually works, just like an AR. And just for grins, so does the forward assist.
@cokemillion2 жыл бұрын
You have to remove the flash hider in order to remove the "bcg" from the upper.
@kchez55862 жыл бұрын
Which sucks if you live in NJ with their bullshit regs.
@rusty52572 жыл бұрын
How to replace the pin assembly for dust cover to stay closed
@KXRTT--- Жыл бұрын
just got mine I've read online that you should not dry fire rim fire firearms as it will damage it but how will I clear the gun then? What has your experience been so far dry firing this gun if you do?
@richardmendoza16922 жыл бұрын
How do I re-open the ejection port cover
@TheOppy543 жыл бұрын
Anyone know if you can change the hangiard on it? Nice video
@maverickgunworks87773 жыл бұрын
Yes, it has 2 set screws, so it can be removed. Not sure what all is out there for it option wise. Just will need to look around to see what you like.
@Operator-fq2fn3 жыл бұрын
Yes you can
@dillan18752 жыл бұрын
What hand guards go on it ??
@michaeldenny38212 жыл бұрын
This 22 is all metal, you can use regular gun lube.
@tacticallyefficient17002 жыл бұрын
Can a m4 tippman mag fit into the hammerli?
@maverickgunworks87772 жыл бұрын
I don't think so cause Tippmann is the same receiver as a AR15. I believe Hammerli is a different design. Call Tippmann to be sure. Thanks for watching our channel.
@kchez55862 жыл бұрын
No, it uses HK mags along with other HK components
@shoeboxSD Жыл бұрын
Can this take other brand magazines? Like Blackdog?
@Vencarter3 жыл бұрын
Besides the mag size, does anyone know if this is legal in CA?
@joeyphysiques3 жыл бұрын
Yes I bought one the other day. Comes with only 10 round mag tho
@Operator-fq2fn3 жыл бұрын
Yes i got mine at turners
@JacobWinkle2 жыл бұрын
I just bought one yesterday at turners. $449.99 if anyone is wondering and all together after tax and background is $529.00 and this is San Marcos California. I can't wait to get it.
@Vencarter2 жыл бұрын
@@JacobWinkle It's a cool 22 but I'm having issues with the accuracy. When shot at paper at 50 yards, I wanna say +6 rounds end up sideways (off target) when ripping through it which means its wildly inaccurate. I'm not sure if its low velocity munitions fault or if the barrel is damaged in some way but hope to get to the bottom of it on the next trip.
@JacobWinkle2 жыл бұрын
@@Vencarter I'll keep that in mind. I havent got mine yet. Still waiting the 10 day wait period but I got 1200 rounds of CCI ammo for it to shoot with. Ill see how that goes when shooting CCI through it. Im planning to get a Eotech sight for it soon tho. Might have to sight in the Iron sights when I get it.
@mlone7 Жыл бұрын
I bought one of these through Simmons Sporting Goods in Louisiana. Ran 120 rounds through it and the extractor fell out. I have been trying to contact anyone about this gun. Simmons is worthless and I recommend that you stay away from them. So far I havent heard anything from the manufacturer/distributor here. It looked to be a good gun but it turned out to be a POS for me. If I get any response from the emails I sent I will be sure and update. For now, buyer beware.