Have I Given Up Rebuilding my WRECKED Audi S1?

Рет қаралды 8,208

3 ай бұрын

Have I bitten off more than I can chew with my Audi S1 rebuild project?
Subscribe to hampshirephoto here: bit.ly/29XJyib
Visit my shop here: bit.ly/2ROYRuo
---
Music:
Epidemic Sound: player.epidemicsound.com/
---
What I use to make my videos:
Main Camera: amzn.to/2N92jhj
Back-Up Camera: amzn.to/2jg6Dl0
Microphone: amzn.to/2jmi5vK
Tripod: amzn.to/2jiUlbw
Drone: amzn.to/2iNVeoC
GoPro: amzn.to/2jk7lhl
Back-Up GoPro: amzn.to/2AwHcPH
Laptop: amzn.to/2jlrZNR
Editing Software: amzn.to/2AvwYin
---
You can also find me on:
Facebook - / hampshirephoto
Twitter - / hantsphoto
Instagram - / hampshirephotography
---
Thanks for watching! :-)

Пікірлер: 81

@709andre 3 ай бұрын

The idea was briliant, I was very eager to watch this series. But if it ended up to be Mat Armstrong from Wish, it’s better step back.

@spud26100 3 ай бұрын

The arch liner will probably fit but the proper S1 liner has vents to allow the heat from the aux radiator to escape into the arch. Probably worth get an OEM liner.

@YerryMina187 3 ай бұрын

Ignore the w***ers commenting negatively. You get so much unnecessary hate. Respect what you’re trying to do & following your passion. Videography immaculate as always 💪🏽

@gregwilldoitllc 3 ай бұрын

Is it negative or constructive criticism.. if everyone just says the same thing then he will think the content is great… which it isn’t

@ScottPC 3 ай бұрын

Episode 3 and we are still no further!

@sunsetgarage755 Ай бұрын

Looks like that question has been answered by the lack of content showing any progress with your S1 for months.

@FeelTheDrive 3 ай бұрын

Not learning if you're not making mistakes. Don't know if they're mistakes until you try! Keep it up mate, as long as yoire enjoying the journey

@brettsmith6010 3 ай бұрын

This surely can't go past 5 episodes. 😂

@DOBS13 3 ай бұрын

I'll be surprised if it makes another episode never mind 5😂

@W00LFY100 3 ай бұрын

Are you scared of genuine parts? Always worth checking as they can sometimes be cheaper than aftermarket equivalent 😅

@richardsealey3626 3 ай бұрын

And they fit..............

@pb3382 3 ай бұрын

Dale Steel will be on here soon telling you to scrap it.

@Chris_Slix 3 ай бұрын

😂😂😂 everything is crap according to that man

@pb3382 3 ай бұрын

@@Chris_Slix i know mate i wait for his comments all the time. The guy is a jealous weirdo 😂😂😂😂😂

@barrywakefield4942 3 ай бұрын

🤣 think you’ve scared him off.

@pb3382 3 ай бұрын

@@barrywakefield4942 hes the type of guy to see a boy in a lambo pass him and get fuming and say to the people hes with (its on finance anyway not his) hes literally that dude. Jealousy has him going wild 😂

@philip244 3 ай бұрын

@@Chris_Slixoh look it’s the fat Matt Armstrong 😂

@kevinneary2283 3 ай бұрын

Personally stick to what you’re good at not crash repairs

@TheEryk03 3 ай бұрын

unscrew the braced one and you will find some catalog number on it.

@D3JXY 3 ай бұрын

VAG 8X0 121 261 is the part youre looking for, Luke :)

@TomCuthbertson 3 ай бұрын

Yep first thing that comes up when you Google it 😂

@killerb276 3 ай бұрын

It’s not hard to find that bracket you just ring the main dealer lol

@suutarinenma 3 ай бұрын

Good job mate. Looking forward to see the next episode! 🤝🏼

@barrywakefield4942 3 ай бұрын

Well done mate for having a go. Like you said you have to start somewhere. The S1 is a great little car to use as a fun cheaper daily. Hope once it’s up and running you do a Stage2/3 modify 👍🏼

@andrewnicholson2627 3 ай бұрын

Stick to photography ,I’ve seen nothing like this,simple repair!

@hampshirephoto 3 ай бұрын

Thanks for your pointless input

@philip244 3 ай бұрын

@@hampshirephotoapt for a pointless video

@thomaswilliams3472 3 ай бұрын

Keep at it Luke, really enjoying the videos. Actually enjoy the fact you don’t know a lot and are learning as you because you don’t have to be a mechanic to love cars

@dash-kt7uf 3 ай бұрын

Lots of love here

@sunsetgarage755 3 ай бұрын

That front wheel arch liner is completely wrong, and even though it physically fits, it won’t work properly with an S1 because it’s missing the vents that are located to line up with the side mounted radiator to help with cooling by allowing the hot air that’s passed through the radiator to escape into the wheel arch. So if you don’t want cooling problems you should probably just order the correct part. Also the bracket for the side mounted radiator is actually supposed to be on an angle, and isn’t too far out of its original alignment.

@davidthomas7424 3 ай бұрын

Disconnect radiator bracket hammer it then put it back

@R19Robbin 3 ай бұрын

Car mods are my favorite videos on the channel 👌

@philip244 3 ай бұрын

Dutch bot

@spent808 3 ай бұрын

TBH there's very few things a lump hammer wont fix.

@ozzyalis 3 ай бұрын

Keep at it bro ignore the keyboard warrior's noone is an expert and within the first 2 minutes of the video you literally say its way out your comfort zone. Didnt realise so many people were born with a mechanical automotive degrees, lol😂 Good watch bro keen to see it finished in the next one, though!

@kevinsmb 3 ай бұрын

Keep doing what you’re doing 💪 Ignore these haters!

@philmarzy3207 3 ай бұрын

Forgive me for being brutally honest but. Why don’t you sell the m3 and the golf R put abit of cash into this to finish it and make it better then move it on. Crash damaged or not. And then get a c63 😎😂

@MitchTube 3 ай бұрын

I’d love to try an S1. Interested to see how it drives

@imauxia 3 ай бұрын

It’s wonderful that you’re having a go! But it would be good to see you do more per episode, with a little less filler - makes the wait for these videos so much more worth it! Great video, just want to see more progress per video

@glynnmason8205 3 ай бұрын

Keep at it its a good car

@bendavid7035 3 ай бұрын

When doing a coolant change next time a tip is to put the heaters on max and full speed that way it gets it fully circulated around the system

@MrGarycoww 3 ай бұрын

Run the heater on full fan with hot setting and cap off .

@jackwalker355 3 ай бұрын

That was done 👌

@omgitsZAN4 3 ай бұрын

To be honest……..😂

@MalcolmTann0 3 ай бұрын

Don’t be scared just have a go what the worse that could happen it’s already broken

@hampshirephoto 3 ай бұрын

Thank you 🙏🏻

@TomDavies86 3 ай бұрын

The pathetic keyboard warriors out in force again… 🤦🏻‍♂️ Cracks me up. You’ve literally been upfront saying it’s your first project, it’s out of your comfort zone, and STILL these brain dead people just bash your videos. They walk among us sadly Luke. Good effort just keep working at it you’ll get better at this in time! Don’t let onboard hatred and tbh jealousy put you off moving forward 💪🏼 They would just love to be in your position that’s usually the case. And as you’ve said in your replies.. don’t like it don’t watch. It’s that simple 😂

@Sorry24538 8 күн бұрын

How’s his d*ck taste you melon 😂😂 another brain dead geek

@pb3382 6 күн бұрын

@@Sorry24538 hahahaaha the little man is hatinf more hahahhahahahaha

@JustbeingHayden 3 ай бұрын

There’s nothing wrong with it man try having my one 😂

@hampshirephoto 3 ай бұрын

Imagine paying more for one which is 10x worse…oh wait 🥴

@JustbeingHayden 3 ай бұрын

@@hampshirephoto didn’t buy it of a subscriber either COPART with fees luck of the draw I guess

@DOBS13 3 ай бұрын

@@hampshirephotowhat a privileged reply that is😂

@W00LFY100 3 ай бұрын

Coolant should be diluted 1:1 with deionised water. Not recommended to fill it neat.

@Ash_7r 3 ай бұрын

It’s ready mix coolant… it’s fine.

@DOBS13 3 ай бұрын

@@Ash_7rI swear people have never heard of ready mixed before, honestly😂

@Chris7uk00 3 ай бұрын

Do what your friend said run it with the cap off, let it warm up so the thermostat opens abit and the coolant gets around everywhere, it will vent the air out the system, you just need to top it up when you see the level drop below min while it's running, once the level stabilizes, top up to max and fit the cap...Some newer high end car's have to be vacuum filled!, but I don't think that's required with an S1.

@richardsealey3626 3 ай бұрын

They are all vacuum filled.......................

@Chris7uk00 3 ай бұрын

@@richardsealey3626 No they are not, I've never vacuum filled any car I've ever owned when doing any engine work which required the cooling system to be drained. So to say they are all vacuum fill gives the wrong impression, alot of cars don't need a vacuum kit to be fitted when re-filling the cooling system, don't give people bad advise or the wrong impression saying they do.

@simontompkins3300 3 ай бұрын

It's very painful to watch how clumsy you are around your rebuild, appreciate your having a go, but it's quite evident you not even used to holding tools. stick to the commentary which I find enjoyable.

@hampshirephoto 3 ай бұрын

Don’t watch the videos then

@Switch13 3 ай бұрын

@@hampshirephotoI appreciate you giving it a go, gotta start somewhere when working on a car. However if you were going to undertake a project like this maybe something older, mk1/mk2 MX5s are a great straightforward platform. And this would have been more suitable. Then after that project you would have newly acquired transferable skills. For future builds. However, understandably an MX5 may not be a car you’re interested in.

@moedavids 3 ай бұрын

@@hampshirephoto exactly. Big ups to you for even giving it a go. It’s ur car so u do what u want with it. my brudda. Seriously. Big up for even trying.

@gregwilldoitllc 3 ай бұрын

Couldn’t agree more. His content is poor at the best of times with that child like chuckle. But watching this is next level cringe. And yes Luke before you reply… I won’t watch any more.

@martynbywater 3 ай бұрын

Got to disagree here. It's good to see someone trying something different from their usual content and getting out of their comfort zone. Keep it up.