Hand Plane Tune-Up - Amazing Results from Your Plane
Рет қаралды 148,550
8 жыл бұрынTuning a Stanley No.5 Hand Plane for Four Fuctions
Watch as I tune a couple of planes for use as scrub, dimensioning, shooting, and smoothing planes
The No.5 comes as a jack of all trades, and with the tuning instructions I give here, you can turn it into a master of at least four essential workshop processes:
- a scrub plane for initial milling of lumber
- a dimentioning plane for preparing components to size
- a shooting plane for accurate joints and mitres
- a smoothing plane for final finish prep.
Watch out for a companion video, which I hope to film by the Spring, on how to set up your plane for the very best results, and demonstrate what it's capable of. To be sure and catch this, why not subscribe to my channel ( kzfaq.info?... ).
Comments - PLEASE comment on my videos. Good or bad, all are welcome. It's the best way for me to produce what you're looking for.
Shares - PLEASE share my videos. If it's good, let others know about it too.
Likes - It only takes one click to show your appreciation!
Subscribe - One click to hear about all my new releases!
kzfaq.info?...
Dislikes - I don't expect everone to like my videos. But if you don't like them, PLEASE comment to tell me why.
Check out my websites for further woodworking information: www.WOmadeOD.co.uk
handcutjoints.blogspot.com/
getintowoodworking.blogspot.com/
Follow me on social media under 'womadeod'
Support me at my Etsy shop 'Tree2Gift'
www.etsy.com/uk/shop/Tree2Gift
Happy woodworking, Mitch
@ledzep3971 8 жыл бұрын
This is one of the best plane tuning videos out there. Great job.
@mitchwoodwork 8 жыл бұрын
+Led Zep 'one of' 😢, only kidding! Thanks, much appreciated. Happy woodworking, Mitch
@willemkossen 8 жыл бұрын
That was the best plane restoration video i have seen so far. I have a nr4 waiting for this kinda job. Also, i have a number of old wooden molding planes in need of some work. I dont know if you use wooden planes, but if you do, a video similar to this one on wooden plane restoration would be very helpful. Even better, why not have a restoration challenge and have a group of makers release a tool restoration vid at a certain date? Or a contest? I would try to join that!
@mitchwoodwork 8 жыл бұрын
+Willem Kossen Cheers Willem - now my head will be too big to get into the workshop! I don't have many wooden planes, but two have appeared in earlier fix-up videos - a coffin smoother and rebate plane. Challenge 😏!
@matthewhenry1944 8 жыл бұрын
I just got an old No 5 and was just staring at it having no idea what to do or where to start. After watching this I have a lot more confidence that I can get it back to its former glory and become a working tool again. Really appreciate it.
@mitchwoodwork 8 жыл бұрын
+Matthew Henry Cheers Matthew. Good luck with the no5, they are a joy to use when they're properly tuned and setup.
@rodrigomeza282 8 жыл бұрын
Please keep making these videos! Really great stuff.
@mitchwoodwork 8 жыл бұрын
+Rodrigo Meza Thanks Rodrigo. Happy woodworking, Mitch
@LessTalkMoreDelicious Жыл бұрын
Wow… best tuning vid I’ve seen yet! …unique and new tips I’ve never seen!
@mitchwoodwork Жыл бұрын
Thanks! Hope it helps
@AncoraImparoPiper Жыл бұрын
This is the most practical and realistic tutorial I have seen so far. None of all that fancy grinding gear and what not. Just hand tools and materials otherwise available in the non-pro shop. I just found my No.5 on ebay and can't wait to get it tuned up for its new working life. Thanks for keeping it real for us ordinary woodworkers who are just looking to maintain their tools at their best performance.
@mitchwoodwork Жыл бұрын
Thanks and best of luck with your no.5. There's no magic to it, but it sometimes takes patience to get every thing just so.
@jakobhovman 8 жыл бұрын
Greetings Mitch...! Excellent video, content and workflow...! It is a pleasure to Watch you working and hear the instructions alongside. There is a great "calme" in it...! I am reminded of a quote from Robert Pirsigs Book: "Zen and the art of Motorcycle Maintenance": "To Repair Japanese Motorcycle Requires Great Peace Of Mind". I will keep this link and see it Again when I attempt to tune my planes.
@mitchwoodwork 8 жыл бұрын
+Jakob Hovman Thanks Jakob. I'm glad that came across. It's never quite calm while filming, but with the camera off it certainly is.
@BeWoLeKs 8 жыл бұрын
Great video Mitch. Thanks for having taken the time to make it.
@mitchwoodwork 8 жыл бұрын
+Bernhard Rindlisbacher (Bewoleks) Thank you Bernhard. The video process took longer than tuning the planes - I was very lucky with their condition.
@hardnox6655 8 жыл бұрын
Excellent tutorial Mitch. Crap... now I need to redo all my frogs, cap irons, adjustment wheels, and levers. Thanks for all the tips. Very helpful. That freeplay is annoying. Now you've provided a remedy. Thanks. Btw, instead of the vinegar I used phosphoric acid (Krud Kutter) and tanked the plane body and rusty parts for 48 hours. Everything was whistle clean, not a molecule of paint or rust was left. Afterwards I used sandpaper and scotchbrite pads to shine up the parts. As you know, there's nothing better for the soul of a true woodworker than using a handplane. Thanks to you and Paul Sellers my handplanes are my go to tools in my shop. They have saved me a great many hours of sanding and have elevated the quality of my wood working. I am the proud owner of 8 Stanleys (3's, 4's, 5's) and 1 #7 Record. I love them all.
@mitchwoodwork 8 жыл бұрын
+Hardnox thanks Peter. I've not tried the phosphoric acid, buy sounds like a good tip. Hope you'll enjoy the set up video once I've completed it. Nobody really differs on the theory of tuning a plane, but set up is another matter. I'll expect some flak from those who can't accept that a different way to theirs might not be wrong😉! Hopefully some will experiment and find what works best for them.
@hardnox6655 8 жыл бұрын
Mitch Peacock - WOmadeOD I look forward to your video. Like everything else, people are resistant to any change especially when they think they know something. I am reminded of the old saying: "the blindest people are those that refuse to see". The phosphoric acid works amazingly well. It can be reused many times. I filter it before returning it to the jug.
@3Godfree 8 жыл бұрын
Really nice work Mitch, have a No. 5, and will re-tune it. Thank you.
@mitchwoodwork 8 жыл бұрын
+Sam K Cheers Sam. Come back and share how that goes. Any worries, drop me a line.
@chriscunicelli7070 6 жыл бұрын
I've watched this before, it's the best and most complete plane restoration video on the internet by far. You did a great job on these. Excellent work.
@mitchwoodwork 6 жыл бұрын
Cheers Chris, I really appreciate that
@peterpacholkow3064 8 жыл бұрын
Hello Mitch, I finally had a chance to watch this video. I must say that both of the plane restorations are a must watch for someone who is looking to learn the ins and outs of a hand plane and essential skills to remedy common issues. Both very detailed. The number 5 plane restoration fills in the gaps that I didn't think were present in the previous video. For me it was the frog contact points and the truing up the sides. I did enjoy the sound of the rain in the first one, lol. I used the first video to restore my first stanlay no 4 plane and it was of great help.
@mitchwoodwork 8 жыл бұрын
+Peter Pacholkow Thanks Peter. My hope was that the latest video would cover all the essentials in a lot less time, yet still be easy to understand with sufficient demonstration. The first video has been fairly popular despite its length, but I know many people just wouldn't think of watching something that long! Thanks for all your comments, and I'm glad they have been of use. Happy woodworking, Mitch
@randomratz 8 жыл бұрын
Excellent video mitch! I restored my late father's Stanley 4 1/2 and 5 1/2 last year and your tips on reducing slack will be a great little upgrade for them. Great channel!
@mitchwoodwork 8 жыл бұрын
+randomratz Thanks very much, glad to be of help. Happy woodworking, Mitch
@Dobbin1010 8 жыл бұрын
This has been very helpful as I tune up my old Stanley (Bailey) 5 1/2 and Bailey #7 that I have inherited from my grandfather. Thanks so much.
@mitchwoodwork 8 жыл бұрын
+Michael Claussen My pleasure Michael. Hope you get great results.
@garydeahl1854 7 жыл бұрын
By a few km, the best video on plane tuning I've seen. Learned a lot of this from my cabinetmaker grandfather, but you've taken things to a new level. Especially like the often overlooked throat tuning. Best regards and hope any future productions are as well executed.
@mitchwoodwork 7 жыл бұрын
Cheers Gary. I like to think I manage about a dozen in-depth instructional videos throughout the year, with the rest being shorter, easier to pull together, and hopefully different from other channels. Watch out for my saws and sawing series - advertised on this channel, but published on my Get Into Woodworking channel
@dougdavidson175 10 ай бұрын
Today I'm the proud owner of TWO no. 5 planes. 1 to be a finisher / shooting, the other a scrub as I do a lot of pallet wood recycling. So this video is in the library of 'to be watched again'. Thanks for your work in posting this. Take care & stay safe.
@mitchwoodwork 10 ай бұрын
Cheers Doug. Sure you'll find the 5s a great addition
@dor12144 8 жыл бұрын
I was taught to refurbish and tune a plane by my Father, a longtime cabinetmaker and furniture artist. his method did not vary from yours one whit! Great video.
@mitchwoodwork 8 жыл бұрын
+Dennis O'Rourke Thanks very much Dennis. I developed my technique through reading, watching, and pure trial and error. My father taught me many other things though, for which I am forever grateful.
@moayedc 5 жыл бұрын
Brilliant video! I stayed to the end and learned that there are a number of considerations I've missed in assessing my recently purchased second-hand no. 5. I loved the tip about removing play from the adjustment wheel! Again, great job!!!
@mihumus 8 жыл бұрын
Also my favourite plane, great job Mitch. I'm setting up a nº 5 and soon publish a video, I hope I stay half as well these. Thanks for sharing!
@mitchwoodwork 8 жыл бұрын
+Humus Workshop Thanks.
@dharmakat3 8 жыл бұрын
Thank you for your informative video. There are several great points in this video that teach the finer details of tuning a plane that others have not addressed as clearly and thoroughly as you have here. I will return to this video many times as I acquire used planes and prepare each of them to become "masters." Many thanks, Mitch. Kat
@mitchwoodwork 8 жыл бұрын
+Kat Beers-McCormick Thanks Kat, much appreciated. I wasn't sure how many people would have got the plane reference to 'Jack of all trades, master of none' - but you're the first to mention it! Cheers, Mitch
@pjculbertson55 7 жыл бұрын
I enjoyed the video. I am currently restoring a Stanley No. 4 made in the late 1890's and a Stanley 78 Rebate plane. The video was very helpful.
@mitchwoodwork 7 жыл бұрын
Thanks. Great to hear it helped.
@mikeuk1954 8 жыл бұрын
Really enjoyed watching this Mitch. Lots of very useful tips and tricks. I did see your other earlier videos on this and it helped me to get the best out of my planes. A plane that works properly is such a pleasure to use.Thanks.
@mitchwoodwork 8 жыл бұрын
+Mike Biggs Thanks Mike. I hope to film the follow up video, showing day to day set up, very soon.
@650gringo 3 жыл бұрын
Wow, best video I've seen on tuning a plane.
@mitchwoodwork 3 жыл бұрын
Thanks
@alexmaakt 8 жыл бұрын
Thank you for sharing these good tips.
@mitchwoodwork 8 жыл бұрын
+alex maakt Cheers Alex!
@Frankowillo 5 жыл бұрын
All the years I had my plane, most of these tips never occurred to me. This video gets added to my playlist of your *Bench* *Plane* *Quick* *Tips* *Setup* for ready reference.
@chiplane3976 6 жыл бұрын
Hi Mitch -that shim for the depth-adjustment is a really neat idea - I plan on trying it out on my planes. Some have a lot of play in that area. Thanks for another great video!
@mitchwoodwork 6 жыл бұрын
Chip Lane Cheers, I hope it works for you
@paulnye1899 5 ай бұрын
By far, the most comprehensive video I have ever seen on plane tune-ups. I have several Stanley vintage planes and all of them need some of the tune-up tips you listed. Thank you and keep the videos coming..
@mitchwoodwork 5 ай бұрын
Thanks
@Pauken11 4 жыл бұрын
Thanks, Mitch. Maybe you could mention that when you are flattening the sole you have the blade mounted and retracted, rather than flattening the sole without the blade mounted. Having the blade mounted puts the sole under tension for an accurate assessment. If flattening the sole without those things in place, the sole can twist when under tension, throwing it out of flatness.
@mitchwoodwork 4 жыл бұрын
Fair point Jim. So long as one uses the same tension every time I guess. I do see the logic, but I haven't evaluated the magnitude of the effect. Certainly on planes like shoulder planes or rebate planes, the scope for movement is significant.
@happy.chippie 8 жыл бұрын
That was highly informative. I can't wait to get out to the workshop & tune my own. Thank you
@mitchwoodwork 8 жыл бұрын
Many thanks
@guillermoisidoro4060 7 жыл бұрын
Hey Master, you're the one! Now I understand how the jack plane works...as a result, I fixed my chinese machine. it works perfectly well. (the problem was inside chip breaker, totaly open )Thanks from Chile!
@mitchwoodwork 7 жыл бұрын
Thanks, great to hear that. Happy woodworking Gui.
@ytthieme 8 жыл бұрын
Good tips. Thanks for taking the time to make such a good video.
@mitchwoodwork 8 жыл бұрын
+Mark Thieme Thanks Mark, much appreciated.
@gunnyoorah1846 Жыл бұрын
Thank you for showing and demonstrating a few new techniques (for me) to improve my no. 5's. Look forward to your next instruction video's. OORAH!!
@mitchwoodwork Жыл бұрын
Cheers. Hope you get good results with your no. 5
@labrat7357 7 жыл бұрын
Hi, Just an observation on selecting the plane to be tuned up, the castings with the ribs were not added as an improvement but to allow Stanley to use relatively "green" castings to speed up production. The down side is that the casting can still move over time in the completed plane. The planes without the ribs are older and the castings were aged and fully stress releived prior to machining and will generally be flat with out the need to lap the sole and have better machining in other areas also. All the best and thanks for the great videos, I always get something from watching them.
@mitchwoodwork 7 жыл бұрын
Thanks, that's very useful to know. It'd be interesting to know how modern castings are treated, and wether current materials and processes negate the need for such considerations.
@labrat7357 7 жыл бұрын
Hi Mitch Peacock, My only info on that came from youtube videos by a youtube chanel "Brandmade TV" where they show the production of the Lee valley tools Jack rebate plane and a video from Lie Nielsen tools about the casting of plane bodies. Both companies use ductile cast iron and claim that it is stress relieved. Ductile cast iron is a different animal to the simple grey cast iron used in the older Stanley and Record planes. it is less prone to cracking and is heavier and stronger.How they stress relieve the castings I do not know. I was told by a man who used to be a pattern maker in the 60's and 70's in Sheffield England that all rough cast iron castings were left outside in piles in all sorts of weather for up to two years and were regularly moved along the outside of the building. The castings were tossed into a bucket on a front end loader, jiggled up and down using the hydraulics then dumped out on the ground a few yards over and when they reached the other end of the building they were considered to be seasoned and stress relieved and ready to be machined.
@mitchwoodwork 7 жыл бұрын
labrat7357 Haha, and just look how much care we all pay to not knocking or dropping them ourselves! Cheers
@OldSneelock 6 жыл бұрын
Mitch Peacock - WOmadeOD The Midwest Foundry made grey iron and semi steel castings. The majority of the castings were shot blasted to relieve stress and blast away the scale. Some castings were annealed in large gas furnaces where they were brought up to critical temperature and held there until all the material had reach a homoginous temperature. The engineer called it soaking. The same furnaces were used to sinter cracked castings. If the castings were dumped too soon into the shakeout they could crack. Several thousand pounds of castings could be annealed and sintered at the same time. Ford Motors left the engine blocks for the V-8's outside for a year in Michigan weather. Rain, snow, heat, and rust. If they passed inspection they were machined.
@keithclague4403 5 жыл бұрын
@@OldSneelock Shot blasting for stress relief actually works by putting compressive stress into the surface so that tensile cracks cannot develop.
@stephenzevetchin 6 жыл бұрын
I've watched a few of your videos and they're really excellent! Subbed and belled ya. Thanks!
@barry-cq4xg 5 жыл бұрын
great video, full of information to absorb and understand. will probably watch it several times.
@mitchwoodwork 5 жыл бұрын
Thanks, hope it helps you
@OORAH659 Жыл бұрын
Thank you for taking the time to show us your method, I learned a lot from you. Please continue your teachings for us .. OORAH!!
@mitchwoodwork Жыл бұрын
My pleasure
@Jamessmith-ks8qx 8 жыл бұрын
nice one Mitch.
@mitchwoodwork 8 жыл бұрын
+James smith Thanks James
@danapeck5382 2 жыл бұрын
Thanks! Huge help, especially the detailed look at the frog. Gives me hope for the old Stanley #10 I just brought home. All the best for the New Year!
@mitchwoodwork 2 жыл бұрын
Glad it helped! Happy New Year
@watermain48 6 жыл бұрын
Great tutorial Mitch, thanks for sharing it.
@mitchwoodwork 6 жыл бұрын
Cheers Bill
@mrJanniekoen 4 жыл бұрын
Very insightfull video. You have quite alot more knowledge than most plane restoration videos. I love how you shimmed up the spin wheel and the chip breaker. I will also spend alot more time mating the frog to the body using your method. Cheers
@mitchwoodwork 4 жыл бұрын
Thank you Jannie
@talanfjr Жыл бұрын
Realy appreciate the work and the easy to understand Naration. Just waiting for the free time to put it into practice. Keep up the good work Thank you
@mitchwoodwork Жыл бұрын
Cheers, glad you liked it
@marhue7026 7 жыл бұрын
great contribution, thanks a bunch . this is for the picky folks
@grendel4711 8 жыл бұрын
I love this video. You explain things very well, and I'll be sure to make good use of what I've learnt here. Thanks a lot, Mitch!
@mitchwoodwork 8 жыл бұрын
+grendel4711 Many thanks. Come back and report on how you get on, it's good to hear if my instruction worked out. Cheers, Mitch
@michaelgross8461 7 жыл бұрын
Great video, especially when it comes to working the sole of the plane. I'll probably go back to some of my planes I've refurbished and give the soles some extra attention. Thanks!
@mitchwoodwork 7 жыл бұрын
Cheers Michael!
@carlopieracci2828 5 жыл бұрын
many thanks for this video
@kreech68 10 ай бұрын
another classic tuning and sharpening video, but a few nice extras in this one - tuning the sides of the casting, and touch-ups on the mouth - thank you
@mitchwoodwork 10 ай бұрын
Thanks Sean
@billwessels207 Жыл бұрын
Nicely done and most enjoyable. Thank you, Sir!
@mitchwoodwork Жыл бұрын
Thanks Bill
@stuartosborne6263 3 жыл бұрын
Great video, thankyou for sharing your knowledge.
@mitchwoodwork 3 жыл бұрын
Cheers
@stevecollins9450 8 жыл бұрын
Thanks for the great tutorial, Mitch!
@mitchwoodwork 8 жыл бұрын
Cheers Steve
@Outdoorshuntingshooting 3 жыл бұрын
Excellent content, well paced, good editing, awesome. I have just bought a number 5, it’s been cleaned up, will check edges for true, and amend as per you guidance. Thankyou. Of course I’ll need three of them, which will please the Mrs lol.
@mitchwoodwork 3 жыл бұрын
Thanks Andrew. I'm just producing a video on making a wooden scrub plane, so maybe you just need one more #5 and some materials ;-)
@mkamp 8 жыл бұрын
Wow. Thanks very much for your thoroughness.
@mitchwoodwork 8 жыл бұрын
+Mariano Kamp Cheers, Mitch
@stevefpv4669 5 жыл бұрын
That, Sir, is one hell of a great thorough hand plane tuning video. I wish I had seen this half a decade ago, it is congruent with all my personal experiences, and I learned a few more things. Thanks for sharing this awesome video and knowledge. Thumbs up and subscribed.
@mitchwoodwork 5 жыл бұрын
Thanks Steve! Hope you find some other useful stuff here
@imortaldeadead 6 жыл бұрын
Superb video, I think I’ll have to watch the rest of your videos and subscribe to see what new videos you will come out with 👍🏻👍🏻👍🏻
@Rich915 7 жыл бұрын
Well done & very informative, I learned a lot...thx!
@mitchwoodwork 7 жыл бұрын
Thanks
@gunterschone8402 8 жыл бұрын
Super Video, MitchThumps up
@mitchwoodwork 8 жыл бұрын
+Günter Schöne Thanks Günter, appreciated.
@blackfender100 7 жыл бұрын
Great instruction Thanks Mitch.I have a couple bailey's A 3, 4 and 2 5's
@mitchwoodwork 7 жыл бұрын
Cheers! Nice, I hope you see some improvement in all of them. Your 3 and 4 should probably be tuned as smoothers, assuming you're mainly working on furniture size components. Maybe set up one with a back bevel (last weeks video) if you have any trouble with tearout.
@arnold7156 7 жыл бұрын
I just did my #5 the same way . and it works perfect. thanks for the info
@mitchwoodwork 7 жыл бұрын
My pleasure. Great to have feedback
@asdkjh4370 2 жыл бұрын
Geez - best "how to tune up" tutorial in internet. Many thanks. No more "more or less" just concrete info. Many thanks.
@mitchwoodwork 2 жыл бұрын
Thanks, pleased you appreciated it
@morrisdelarosa 4 жыл бұрын
Thanks. Greetings from Colombia
@mitchwoodwork 4 жыл бұрын
Cheers!
@Malba1776 11 ай бұрын
Thanx foe the ideas on how to get rid of the slop on the yoke, keep the ideas coming, thanx again !!!!
@mitchwoodwork 11 ай бұрын
Cheers. Hope you notice the improvement
@patentleatherkicks 3 жыл бұрын
Lovely, thank you!
@mitchwoodwork 3 жыл бұрын
Thank you too!
@meanders9221 8 жыл бұрын
Excellent info, one of the best I've seen, well worth watching 30 min. I had never seen that scraping with a file tip, always have trouble squaring the sides of old planes. And your shim/clip for taking out depth adjuster lash was extremely informative. I have my grandfather's No. 5 (1899 patent date), it's in pretty nice condition but has no frog adjustment, so I have tuned it as a smoother and occasional jointer, really enjoy using it. I've used many of the techniques you illustrated for setting up my No. 4's for scrubbing (8 inch radius works better for me than 3 inch) and smoothing, and an old No. 6 with no frog adjuster as a shooter. Thanks again, really enjoy these in-depth sessions.
@mitchwoodwork 8 жыл бұрын
Cheers Michael. Although I dislike the metal dust and the time it can take, there is a great payback in performance from a good tune up. Nice to hear your using some old planes too - such a shame that many are left to rot.
@meanders9221 8 жыл бұрын
+Mitch Peacock - WOmadeOD I have only one modern plane, a Veritas No. 4, so I use nearly all antique planes. Also have and use a No. 5 1/4 "junior jack" that was checked out to me in high school woodworking and given to me by my shop teacher at the end of my last class, when he retired. I find that on eBay and at old tool swap meets here in California vintage planes are no longer cheap and nice ones are harder to find, so a lot of people must be reaching into the bardo and bringing them back to life. They will all be watching your videos!
@mitchwoodwork 8 жыл бұрын
+Michael Anderson that old supply and demand story. The tool dealers, advertising to buy old tools, often get the bargains. Car boot (trunk) sales still prove fruitful here. I'm lucky to have most of what I'd like already, some old some new.
@meanders9221 8 жыл бұрын
+Mitch Peacock - WOmadeOD I don't know if those exist here, might be fun to find out, not that I need anymore planes...but a good breast drill would be nice...
@MikeSmith-hg6hs 2 жыл бұрын
I just realized I need to restore my #5 after I just got done with it. Haha gotta love a hobby. Great video
@mitchwoodwork 2 жыл бұрын
You'll appreciate the effort. Cheers
@jurikristjouw Жыл бұрын
Roger that sir! Going for round 3 over here with an old Stanley 4 1/2 from the 40s ;-)
@mansourhindi5433 5 жыл бұрын
I have new plane Stanley, not used until now, its amazing 😊
@mitchwoodwork 5 жыл бұрын
That's great, thanks
@intheshed9256 7 жыл бұрын
Great video. I should have watched it before restoring my own no5 😉
@mitchwoodwork 7 жыл бұрын
Hej tack
@bothann 7 жыл бұрын
Thanks, Mitch. You've answered a bunch of my questions. I've been struggling with a new Kunz no 4 for months now, thinking the issue was the chip breaker (which is inaccurately made). Will have to strip it down and look at everything.
@mitchwoodwork 7 жыл бұрын
Gosh, I thought Kunz was quite a good brand! Hope you get it working well
@SharpEdgeWoodworking-UK 8 жыл бұрын
A very thorough tune up video....and a nice tip on reducing the fly wheel travel.If you are now finding yourself at a lose end Mitch.....I have a no.4 and no.5 for sale if your interested? If not they'll be on eBay soon (other auction sites are available).
@mitchwoodwork 8 жыл бұрын
haha, I'm in the same predicament as you - too many similar planes, too little room! but thanks for the offer Chris.
@buckrogers6665 8 жыл бұрын
30 minutes is about right for tuning up a plane. Well done. My plane is no. 4 Stanley clone labeled as Mastercraft. Made in England. I still use a honing guide because I lack the free handing skills. The plane is still very difficult to adjust to expose the beveled edge. The frog required quite a bit of flattening to make it uniformly flat.
@mitchwoodwork 8 жыл бұрын
+Buck Rogers Thanks. Do you perhaps have the lever cap screw too tight? Try loosening it a little. Without the blade assembly installed, does the spin wheel move easily on it's threaded rod? If not that, try moving the chip breaker further back from the edge - sometimes the slot is machined too close to the front, limiting the possible depth of cut.
@buckrogers6665 8 жыл бұрын
+Mitch Peacock - WOmadeOD It spins freely without the blade. Backing off on the screw helps but enough to free up the adjustment effort results in not enough clamping force.
@mitchwoodwork 8 жыл бұрын
+Buck Rogers One other thing that occurs to me, is the frog far enough forward for the blade to clear the mouth without fouling at all? Might be worth adjusting the frog forwards a little just to rule this out. With regards to the lever cap screw, the depth adjustment mechanism should stop the blade being pushed back in use, so the lever cap only needs sufficient force to prevent the blade moving laterally. When you say 'not enough clamping force', what is happening to make you say that? I'll check back here tomorrow, but for now it's way past my bedtime😉
@buckrogers6665 8 жыл бұрын
+Mitch Peacock - WOmadeOD Mitch, Thanks for the help. I went and back of the screw a little more while it was latched. It helped some with the effort. Then the effort to turn became higher. It feels like it is being jammed or binding. So, I looked through the side between the blade/chip breaker where the lever passes through the blade. It was hitting the stainless flat spring because it protruded too far. I disassembled and took my Dremel to the tip of the adjuster that was hitting the stainless flat spring. I removed about a millimeter, reassembled the effort became much easier. Not "one finger easy" but much, much better. These Stanley clone planes are quite the "science project." It is quite the challenge. Bill (aka Buck Rogers)
@mitchwoodwork 8 жыл бұрын
+Buck Rogers Ah, not come across that before - definitely one to remember. You've discovered by now that bench planes really aren't a dark art; there aren't that many moving parts, so when it doesn't do what it should it just takes a little investigation. WELL DONE! Now you can enjoy using it.
@DobbsyLondon 7 жыл бұрын
Good stuff mitch!
@mitchwoodwork 7 жыл бұрын
Cheers James!
@kamanamulenga3844 4 жыл бұрын
Good work thanks for wooden the demonstration
@mitchwoodwork 4 жыл бұрын
No problem 👍
@cpeterson877 5 жыл бұрын
Thanks
@rileygomez3829 8 жыл бұрын
Great tips
@mitchwoodwork 8 жыл бұрын
Thanks Riley!
@derekr7814 5 жыл бұрын
It's very easy to remove the breaker height adjusting levers in the frog (not the lateral adjuster). The little pin hammers out behind the frog, I had mine out in 2 minutes. Which makes it much easier to flatten the frog.
@juliodifelippo 8 жыл бұрын
Great video! Thanks for share. Saludos
@mitchwoodwork 8 жыл бұрын
Thanks Julio
@andykg73 2 жыл бұрын
Glad I came across this excellent vid. I recently purchased a no 5 from eBay to use on my shooting board but the sole is very unflat. Ive tuned a no 4 but that didn't require nearly half as much work so I was about to give up but seeing your clear instructions I'm going to have another go at the 5 and get it flat and fit for work.
@mitchwoodwork 2 жыл бұрын
Start with really coarse paper and change it regularly until it just touches the low points. Then work up through the grits. It is soul destroying work if you'll pardon the pun.
@TheSavagederek Жыл бұрын
When I did my last one , I also repainted the inside with black metal paint . It looked brand new when finished . I need to make a new back handle grip for one of mine . It's cracked , and one of the plastic types .
@mitchwoodwork Жыл бұрын
Making a replacement handle is one video I haven't done! However, I do have a 3 which needs either a repair or a replacement. Now there's an idea💡
@tomaslainas695 8 жыл бұрын
awesome tip at 29 minutes ! :D got to try it
@mitchwoodwork 8 жыл бұрын
+tomas lainas Thanks Tomas, let us know how you get on with that. Happy woodworking, Mitch
@tomaslainas695 8 жыл бұрын
it worked well :D keep those videos coming ! :D
@mitchwoodwork 8 жыл бұрын
+tomas lainas Great stuff. watch out for the set up video before too long.
@AssafOppenheimer 3 жыл бұрын
good tip that steel clip for dealing with slack!
@mitchwoodwork 3 жыл бұрын
Cheers
@petewollman550 Жыл бұрын
Nice video 😊
@mitchwoodwork 10 ай бұрын
Thanks 😊
@danielmierop662 3 жыл бұрын
Thank you
@mitchwoodwork 3 жыл бұрын
Cheers
@TeddyBear651946 7 жыл бұрын
Nice video.
@mitchwoodwork 7 жыл бұрын
Cheers Jack. Hope my other answer helps
@ruknettintekir 8 жыл бұрын
Great video, thanks for your effort, I love watching your videos. Waiting for the next one
@mitchwoodwork 8 жыл бұрын
+Murat Koten Thanks Murat. Do you get to do much woodwork?
@ruknettintekir 8 жыл бұрын
+Mitch Peacock - WOmadeOD Not so much Mitch, because I spend much time with watching woodworking videos, fixing and upgrading second hand ww machines, looking for hand tools, finishing materials and other shop stuffs and learning basic skills like sharpening etc. But yes, I made my workbench, at least😊 (sorry for poor english)
@mitchwoodwork 8 жыл бұрын
+Murat Koten Maybe in the future you'll have more time. And your English is very good!
@ruknettintekir 8 жыл бұрын
+Mitch Peacock - WOmadeOD thank you vm Mitch😀 today I found a piece of padouk lumber (120*25*4 cm) it is difficult to find much padouk in Turkey. Pls can you tell me what should I do with it? What kind of project would the best?
@mitchwoodwork 8 жыл бұрын
Murat Koten You could make a small table - follow my new build on my Get Into Woodworking channel. Or maybe a tongue drum, or marimba - padouk is used quite a bit in musical instruments. I also used a length to make the beam of my panel gauge - video from Christmas time.
@robertbrunston5406 8 жыл бұрын
Thank you.
@mitchwoodwork 8 жыл бұрын
Cheers Robert, I hope it brings you plane success
@geoffjohnston1531 8 жыл бұрын
hey there, i done a decent job on the number 4 1/2 i mentioned to you. It's a gorgeous tool to use. Can't imagine I'll every bother with the electric one again.
@mitchwoodwork 8 жыл бұрын
Hi Geoff, thanks for letting me know. sounds like you got the bug!
@geoffjohnston1531 8 жыл бұрын
I do. Recently bought a pocket hole jig and just ordered a small table saw. Enjoying woodwork more than ever and a few simple items of furniture planned. Keep knocking out those KZfaq clips.
@mitchwoodwork 8 жыл бұрын
+Geoff Johnston Great stuff. I've got plenty of video ideas to keep me going for some time. Cheers, Mitch
@psiclops521 3 жыл бұрын
Thanks. I get something new from just about every plane tuning video. I bought a No. 4 Craftsman from the 1970s about nine months ago and tuned it for scrubbing and it did a great job, but I recently decided I needed a better smoother than my No, 5, so I restored the iron and closed down the mouth and I have to say, even though I need to do more work on the iron, it's my new favorite because that puppy shaves like a pro. However, I never even considered working on the frog. Now I'm going to check it just to make sure it's where it needs to be (and get that iron properly set up...I didn't get it squared off when I took the radius down from a scrub to a smoother so I need to put it on the diamond plate again and grind).
@mitchwoodwork 3 жыл бұрын
Cheers. I'm just about to film tackling a Stanley No.3 which I picked up in a very poor state.
@BDM_PT 8 жыл бұрын
Hi there from Portugal, My No.#5 is a cheap one (Silv**line) but I will try to tuned up as you described here and see what it came out :D Obrigado (Thanks)
@mitchwoodwork 8 жыл бұрын
Thanks. You should be able to match this performance, and it would be nice to hear how you get on.
@BDM_PT 8 жыл бұрын
+Mitch Peacock - WOmadeOD Thanks for the reply, I will make a video :) Obrigado(Thanks).
@TootieProduct 3 жыл бұрын
Thank you, I inherited a baily no4 from my grandad and have recently restored it but it's still not cutting how I would like, not one video I came across talked about flattening the frog, thank you for your in depth video, I'm going to be following your instructions
@mitchwoodwork 3 жыл бұрын
Thanks. My inherited planes are my favourites, and I feel they are worth putting the effort into getting them well tuned.
@ilemjohn 7 жыл бұрын
nice!
@mitchwoodwork 7 жыл бұрын
Cheers!
@lbhunter6341 5 жыл бұрын
Absolutely brilliant video, sir...your method to remove "slack" or "slop" as I call it, I believe it's properly referred to as "lash," is stunningly simple but very effective...turns a Ford Pinto of a plane into a Maseratti! Well done!
@mitchwoodwork 5 жыл бұрын
Thank you for such praise - much appreciated
@johnjones6077 Жыл бұрын
When your flattening the frog why not use spray adhesive and stick sandpaper down to the iron and use that. You’d have a cut the sandpaper where the slot on the iron is so that the yoke and lateral adjuster will sit in that slot. Then you’ll get a perfect mating surface to the iron
@mitchwoodwork Жыл бұрын
That's an interesting idea. Well worth trying out. Cheers
@bbatta6900 8 жыл бұрын
You certainly went above and beyond with these planes. Very nice job. I think if you had two different iron sets you could probably achieve similar results with just one plane body could you not?
@mitchwoodwork 8 жыл бұрын
+B Batta Cheers. For sure it's a good idea to have interchangeable iron sets. Because I see a benefit to altering the mouth for different tasks, that necessitates adjusting the frog too, and therefore having a couple of planes set up saves some time.
@benvolio1987 8 жыл бұрын
good video :-)
@mitchwoodwork 8 жыл бұрын
+Benvolio Foster Thanks, much appreciated.
@RayVRoberts 7 жыл бұрын
Love your videos... and that your workshop looks out on the garden. My bench sits in front of a window as well. That probably hurts my production but it makes for a happier woodworker. Have you ever seen a plane sole deflected by the tension from the tote or knob screw? Just curious as you checked for flatness without those attached. And a compliment on that full length Stanley #4 rebuild video. That inspired me to purchase and refurbish more than 10 planes since I first viewed it.
@mitchwoodwork 7 жыл бұрын
Cheers Ray! I must admit I haven't seen that deflection - the soles are reinforced at the junctions and it doesn't take much torque to secure the handles sufficiently. The one thing I always seem to see is wear down the centre, caused by the planing of lots of narrow edges - amazing how abrasive wood can be!
@738polarbear 7 жыл бұрын
Great vid Mitch .I particularly like the tip for removing backlash thanks.
@mitchwoodwork 7 жыл бұрын
Cheers! Yes, backlash does seem to be unpopular 😉
@bhaygood7306 7 жыл бұрын
Mitch Peacock - WOmadeOD l
@silver-hy6mi 4 жыл бұрын
Good complete overhaul of your 2x5 Stanley’s! Have you ever thought about draw filing the sole of the planes?
@mitchwoodwork 4 жыл бұрын
I've tried scraping the sole, after seeing someone else do this, but to be honest I've always found abrasives to be fast and effective.
@psk82channel 6 жыл бұрын
Доступно и понятно для всех 😄
@TheSavagederek Жыл бұрын
I've used Stanley and Record planes my whole career . I like a 5 and the wider but shorter 4 1/2 .
@mitchwoodwork Жыл бұрын
I have a record 4 1/2 as a dedicated smoother. Lovely plane
@TheSavagederek Жыл бұрын
@@mitchwoodwork they have a good width and decent weight behind them . I always carry mine . I'm not a huge fan of handheld electric planes .
@michaellienhoop2387 3 жыл бұрын
Thank you so much for this video. I’ve learned a lot of new things that I didn’t knew.🙏👍👍👍
@mitchwoodwork 3 жыл бұрын
Glad it was helpful!
@RGRGJKK 8 ай бұрын
Thanks Mitch and great piece of advice avoid grinding or reduce casting from a bench plane .I bought a stanley 10 1/2 carriage maker without a blade when I got a original blade I noticed that one of the past owner of that plane removed a lot casting fron the sole and side of the stanley carriage maker plane as a result the blade is more wide than the sole of the plane about 5mm :( .pura vida mitvj great video
@mitchwoodwork 8 ай бұрын
Thanks. The 10 1/2 iron is a little wider than the plane body. But 5mm is too much. Worth grinding it down a little in my opinion.
@RGRGJKK 8 ай бұрын
@@mitchwoodwork thanks Mitch for your piece of advice .
@timholiner381 8 жыл бұрын
Thanks, Mitch. Great video, as usual. Have you ever used valve grinding compound to fit the frog to the body? I have seen others use this method.
@mitchwoodwork 8 жыл бұрын
+Tim Holiner Cheers Tim. I've not tried that method, but I'm sure it would work okay. I like this scraping method because most woodworkers will have a file hanging around.
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
A Craftsman’s Arsenal
Рет қаралды 61 М.
Just Plane Fun
Рет қаралды 14 М.