Hand Pouring FAIL & New Threadfin Shad Swimbait Colorway Demonstration

Рет қаралды 27,095

4 жыл бұрын

Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#luremaking #fishing #outdoors

Пікірлер: 207

@WorldsWorstFishing 4 жыл бұрын

Haha what a cluster on that first attempt! Check out my affiliate link in the description for awesome pigments!!

@beckymouradjian1689 4 жыл бұрын

I made my luers

@beckymouradjian1689 4 жыл бұрын

That I showed you

@WorldsWorstFishing 4 жыл бұрын

@@nanate8190 I have the final ones available..not the "rejects" haha they sold

@nanate8190 4 жыл бұрын

Messaged you on Facebook! Hope to grab those rejects plus more of them!

@Ozzierob 4 жыл бұрын

It's the new WWF trout colour :)

@3HandsCustomTackle 4 жыл бұрын

Chris, even your “suck” pours looked darn good

@WorldsWorstFishing 4 жыл бұрын

Thanks art

@brianmathis2009 4 жыл бұрын

I was going to say the same thing

@larrypayne1136 2 жыл бұрын

Great video, can’t wait to try and make this color.

@fishnmar 4 жыл бұрын

Again, another fantastic video. Can't tell how pleased I am that you don't "cut" the boo-boo's from your videos! All us plastic bait makers knows this is the reality of trying to achieve a top-notch bait like you have done. Keep the content rolling and stay well and healthy!

@fishnmar 4 жыл бұрын

By the way, the second set of shad baits were UNBELIEVABLE! Great work! Love the color shift combo on the top of the bait. Wow!

@WorldsWorstFishing 4 жыл бұрын

Thank you man...yeah the screw ups are kinda funny

@teamfishlineswfl9099 3 жыл бұрын

Love finding gems of yours !!!! Awesome color!!

@elk95481 3 жыл бұрын

Awesome looking baits. Ordered my molds today.

@gonedeepseafishing 4 жыл бұрын

Great video- like the real trial and error. Awsome looking baits. I'm sold.

@newcrankeeworkshop 4 жыл бұрын

I have never seen a disaster turn out so great. Both are great pours. Keep it up.

@WorldsWorstFishing 4 жыл бұрын

Haha you're the result was surprisingly much better than it should have been

@joecraig5082 4 жыл бұрын

Love your videos! Can’t wait to start making my own plastic lures!

@WorldsWorstFishing 4 жыл бұрын

Thanks.joe

@Bulfwyne Жыл бұрын

These baits, specially the first ones you poured and showed at 15:27, These colors are perfect for Kokanee land locked salmon up here in northern california !! some have more darkened heads or lines down the side, but that's when they are like 7 or 8 inch, so this is great inspiration.

@terryeastep3915 4 жыл бұрын

It was awesome the whole way through. You rock bro.

@stevequate1797 2 жыл бұрын

Totally Awsome thanks for the step by step great dining you have me to where I think I can make a shad color hoping wished I could put scales into mix maybe airbrush a scale onto them and dip into a clear coat maybe thanks

@rexbrowning4709 2 жыл бұрын

Both were awesome

@danlafleur2151 4 жыл бұрын

I dig that color combo. The second batch top color is awesome.

@WorldsWorstFishing 4 жыл бұрын

thanks man

@rwilliams160 4 жыл бұрын

Got the baits yesterday, thanks again for sending them! I'll be sharing them with fishing buddies I've shared your videos with. One of them and I are wanting to build our own rods now. Thanks for all your videos and sharing your knowledge!

@WorldsWorstFishing 4 жыл бұрын

Awesome to hear!

@backwatercatfishing4989 4 жыл бұрын

Love the colors... Great job

@WorldsWorstFishing 4 жыл бұрын

Thanks guys...fry some catfish for me!

@casedonald1092 3 жыл бұрын

The next batch ,very good .

@ndistefano5 4 жыл бұрын

Man I think these might be a new favorite color for me. And even those “rejects” looked pretty dang good to me. I’m sure I could catch some big ole fish with em. Solid work and as always great video!

@WorldsWorstFishing 4 жыл бұрын

thanks Nick!

@pector55 2 жыл бұрын

I love rejects! I usually talk to my dog when making baits and I just say, "oh no! Daddy needs to keep these." ;-)

@customrodsandbaits8620 4 жыл бұрын

I actually like the first batch the best. The black/green looks more natural to me. Nice work! Can’t wait for the next rod build. Gonna order some of the color shift stuff and put it on a rod blank. Should be cool!

@WorldsWorstFishing 4 жыл бұрын

Thanks John!!

@gpharned 4 жыл бұрын

I don't have a favorite. I actually liked the suck pour also. There is such a fine line to skin pouring. My first looked very good but the delaminated when I tried to use them. Then I used the griddle... Too hot and they blended. Then I broke the wife's griddle lol. I still need to purchase pigments to go with my colors and glitter. $$$ . I got into this to make baits for myself and friends, my wife says I could have purchased a lifetime supply of lures for what I've spent for lead molds and plastic molds and accessories. I super enjoy the hobby. Thanks for all the help and videos as well as your time. Stay safe Chris.

@WorldsWorstFishing 4 жыл бұрын

haha yeah it adds up...thanks for watching my vids

@heyjohnson5535 4 жыл бұрын

Fine looking baits even the "messed up ones" looked awesome

@WorldsWorstFishing 4 жыл бұрын

thanks

@donvergonio 4 жыл бұрын

Nice outcome 🤙🏼🎣

@WorldsWorstFishing 4 жыл бұрын

Hey thanks..can still be better..lol stuff is never ending.

@johnharder5618 4 жыл бұрын

I like both ... IMO the more gray first pour would suit me as a better colored bait in slightly stained water

@maineoutdoorshuntingfishin7396 4 жыл бұрын

Awesome vid Chris and it would be awesome if you could make a pogy ( atlantic menhaden ) or mud minnow skin pore

@marcusbullock630 4 жыл бұрын

i actually liked the first one. the gold and pink mixed well and gave it a nice gizzard shad look

@WorldsWorstFishing 4 жыл бұрын

Thanks man...

@willperryman4559 4 жыл бұрын

I love the second batch as well, and you nailed that recipe and I hope to own some, if I am ever fast enough to find them available 😜

@WorldsWorstFishing 4 жыл бұрын

I have them! DM me on insta

@willperryman4559 4 жыл бұрын

It’s so funny, hearing you talk “failure” when I would absolutely use those and feel confident they would catch good ones 👍🙌🎣 I’m saying this after your first batch, and I love the lavender vein on shad. The shad in North Carolina have those shades

@WorldsWorstFishing 4 жыл бұрын

thanks will

@basscatlildave 4 жыл бұрын

Thats what I love love about your channel. The good along with the bad but I did not see anything wrong with what you called a mistake. Good job buddy

@Ozzierob 4 жыл бұрын

Chris. You should invent an injector with a glass window or measurement on the injector stork and use for the open pour moulds. Keep up the great work man.

@deathbyhook 4 жыл бұрын

Amazing I need to pick this mold up

@WorldsWorstFishing 4 жыл бұрын

Agree

@lukebroderick2215 4 жыл бұрын

Great video

@WorldsWorstFishing 4 жыл бұрын

Thanks Luke

@JuliusLandman 4 жыл бұрын

Also, you can use prestick to make small walls in the mold to prevent overflow to the tail

@richshackelford5793 4 жыл бұрын

I like both

@WorldsWorstFishing 4 жыл бұрын

thanks rich

@ronbishop8336 4 жыл бұрын

Looking good

@WorldsWorstFishing 4 жыл бұрын

thanks

@gurohyena3649 4 жыл бұрын

Call this color Party Shad. Lol Really loved that final product, beautiful.

@WorldsWorstFishing 4 жыл бұрын

thank you

@odestog8903 4 жыл бұрын

Chris, I didn't see any mistakes, just some awesome bass killing swimbaits! I really liked the smoke/green ones! They looked very natural in their coloration. Yous just too hard on your self lol.

@axe72 3 жыл бұрын

Chris--can you point me to whichever of your videos goes through dialing-in griddle temperature for laminates? Noob here...I cannot seem to get mine set up correctly; either too cold and the layers don't bond, or too hot and everything mixes. Love your channel!

@algwoutdoors9481 4 жыл бұрын

Hey sir I think they both looked great! I’m glad I was filming my attempts at hand carving a top water bait today. No scroll saw or belt sand. Just me a mora knife sand paper and drills. But we learn from our mistakes and move on!

@WorldsWorstFishing 4 жыл бұрын

sounds challenging!

@algwoutdoors9481 4 жыл бұрын

World's Worst Fishing typo in my first comment, I wasn’t filming. Mr Marling makes it look pretty easy, but he’s been doing it a while longer than I have.

@hauptstadtangler030 4 жыл бұрын

Hey Chris, I haven't been with you for a long time, but now I'm back i love this channel i love this channel i love this channel many Greetings capital angler

@WorldsWorstFishing 4 жыл бұрын

Thanks so much man

@cherokeeboggs534 4 жыл бұрын

I liked them both

@WorldsWorstFishing 4 жыл бұрын

thank you

@brianbrown9102 2 жыл бұрын

Hey, alot of great information on your channel. Do you know of any molds for 9" or even 12" parachute swimbaits? I'm in Maryland and striped bass trolling is big around here and I haven't been able to find any molds. Thanks in advance!

@brianpugh194 4 жыл бұрын

Would love to see these new hand pours in action. On the water videos maybe some clear underwater action segments. Absolutely love the videos. Keep them coming. Those baits look amazing. 👍

@WorldsWorstFishing 4 жыл бұрын

Thank you Brian...caught a nice striped bass on it yesterday

@charlesjoyce7717 4 жыл бұрын

All of them can out great! Have you tried using a syringe to use for your black dots on the gill plates?

@WorldsWorstFishing 4 жыл бұрын

the plastic sets up too quick when in a small syringe.

@sylvainbarbera7100 4 жыл бұрын

Hi Chris, i've got the swimbait open poor mold and it looks great! Well done. But I think I have been making something wrong because I got 5 lures out of 7 try with the curve effect on the top of the lure and on the tail. Do you do something special to prevent it? I'm warming the mold and after i poored the lure I put it back in the oven for 15 mins and then cool it slowly. Would enjoy a tip!

@stevencarnes7790 4 жыл бұрын

I like the color but I think the purple is more pink. I would take out the purple layer on the inside of the bait. If you take that same purple with some really fine purple flake and used that as a thin see through skin on the outside of the bait. Then did the other three layers it would look awesome. I always enjoy watching your channel keep up the great work.

@joegattuso2052 Жыл бұрын

Wish I could give it another like.

@bassmunitions5834 2 жыл бұрын

I decided to buy 4 swimbait molds from ai angling after watching your video . Can u tell me the hot plate temperature setting u should keep it at while making the baits? Thanks

@i2aspire 4 жыл бұрын

I liked both of them personally

@johnpetro7199 4 жыл бұрын

When do you use swimbait blend vs the craw/tube plastisol?

@dylanentius3167 4 жыл бұрын

I'd never thought I would see you pouring with "regular" pearl powders again😂

@WorldsWorstFishing 4 жыл бұрын

Haha oh yeah..

@Ozzierob 4 жыл бұрын

hahaha i tell my wife i'm allergic to washing dishes. Stay safe mate. The warm season should help you there. We just lost our warm weather here in Country Oz.

@WorldsWorstFishing 4 жыл бұрын

Yeah it should fight this thing off...stay safe man

@davemartin8684 4 жыл бұрын

Even your rejects are damn good, thanks for the lesson and keep them coming.

@WorldsWorstFishing 4 жыл бұрын

Thanks for watching Dave

@andybowlin 3 жыл бұрын

Just starting out would a heat gun work instead of hot plate just for one mold at a time? Or does the hot pad work that much better

@Ozzierob 3 жыл бұрын

Hey man, what mould is that big swimbait open pour ?. Cheers Rob

@jamesleary1405 4 жыл бұрын

Your swimbaits always impress me. I recently picked up those new Berkeley 3d swimbaits they are pretty beefy I've tried every size hook I own and I got tons even my ewg 5/0 hooks with a under spin blade from owner just didn't fit nicely after rigging it up it just didn't seem like enough room between the belly and hook for a good hook set. Can you recommend a swimbait hook that would fit such a large fat swimbait?

@jamesleary1405 4 жыл бұрын

By the way idk if you seen the baits I'm talking about but I've never been a Berkeley fan till these new 3d soft plastics. They are very similar to the style baits in this video.

@dennishodson990 4 жыл бұрын

What was the final temp you found best for keeping your mold heated on your griddle?

@frankhunt5018 4 жыл бұрын

The color shifts look better to me for sure, however I'm not sure it would matter to the Fish. Heck we many never really know unless you do a head to head challenge with someone like Simple Jack, lol. Anyway, that mold is awesome, AI makes great stuff. I guess it's time I order my own molds and take the plunge into this hobby.

@WorldsWorstFishing 4 жыл бұрын

Haha yeah it's a great hobby

@alabamatrout6985 4 жыл бұрын

Do you sell these? And if so how do I get them? Would love to see some bigger 8 or 9 inch ones

@nmhc12341 4 жыл бұрын

What's the purpose of the griddle? What brand of gloves do you use?

@zackmaxwell7108 3 жыл бұрын

What temp do you keep your skillet at?

@themitchellfamily3641 4 жыл бұрын

Really like that charcoal and green, look like it would be a good bluegill color how bout you try that next bluegill colored swimbates, skin pour the vertical lines like northern bluegill and that kinda yellowish golden color for the bottom that would be sick!

@logschu 4 жыл бұрын

Add some black flake to the first ones to make a good rainbow trout

@diggerwest5219 4 жыл бұрын

Both look good do you put scent on baits at all

@WorldsWorstFishing 4 жыл бұрын

Not usually

@petaks01 4 жыл бұрын

Liked the rejects better, too much sfx in the colorshifts but in the end it only matters if the fish likes them.

@WorldsWorstFishing 4 жыл бұрын

Yes sometimes more simple can be great

@DYTangler 4 жыл бұрын

Still a good video, its always a learning experience. And I like to say, no matter how good you are they can't all be gold lol.

@WorldsWorstFishing 4 жыл бұрын

Haha yep

@stevecardenzana4113 2 жыл бұрын

Im new but what temp do you keep the griddle at and approx how long do you wait between pours or is it consistency of the lower layer that matters thanks !

@WorldsWorstFishing 2 жыл бұрын

Watch my most recent video

@davidbonnee4566 4 жыл бұрын

sure like when u do shad colors

@trenthoff1106 4 жыл бұрын

Never pay for someone else's mistakes! Haha, jk those turned out awesome for bloopers

@scottkidder438 4 жыл бұрын

Have you thought of trying the color shifts in a worm yet? Many marine worms are very iridescent like the polychaete worms.

@WorldsWorstFishing 4 жыл бұрын

Yes..did some red shad worms with colorshift last week

@0.40cal 4 жыл бұрын

Fire

@WorldsWorstFishing 4 жыл бұрын

Appreciate it... that first pour was baaaad haha

@matthewsinger4902 4 жыл бұрын

They look like striper catching baits here in Arkansas. Very rainbow trout-like.

@WorldsWorstFishing 4 жыл бұрын

Thanks Matt

@victorhebert4494 4 жыл бұрын

Hi, im from Canada and I want to know where I can buy your swimbait!?

@slaunchs 4 жыл бұрын

That first one looked like baby trout I bet those would slay

@anthonybogan9768 4 жыл бұрын

Where can i buy your lures

@roundabout136 4 жыл бұрын

New to making baits...how do I get an aluminum mold like yours?

@WorldsWorstFishing 4 жыл бұрын

Angling ai

@d.moutdoors4377 4 жыл бұрын

Lol everyone makes mistakes even a personal and you do awesome keep up the great work.

@WorldsWorstFishing 4 жыл бұрын

Thanks

@MrKoolbrez69 4 жыл бұрын

Purchase pipettes for the dots.

@miguelinzunza205 4 жыл бұрын

Hey I`m new on this channel and a wonder where i can get that molds?

@WorldsWorstFishing 4 жыл бұрын

Angling Ai

@hillbillytarzan 4 жыл бұрын

Where can I order your swimbaits or can I buy them? Jeff Piil of fringe sold his 7” molds like yours and I need some

@WorldsWorstFishing 4 жыл бұрын

Well I have 6" mold just like his 7" and the 6" mold from this video that I developed with angling Ai. I don't have one in 7" yet. You are welcome to email me however, worldsworstfishing@gmail.com

@williammitchell9300 4 жыл бұрын

Hello Chris, Question for ya. do you check the the softness with a Durometer or just guess?

@WorldsWorstFishing 4 жыл бұрын

you buy certain "blends" of plastic, so you already know the firmness

@williammitchell9300 4 жыл бұрын

Hey Chris I forgot to tell you that I ordered the glitter and I'm in the Mist of making a new swim Bait when I get get done and get a mold I will send you one to check it out. Now it will be some time but I will keep you posted on it. I love all of your Shows keep up the good and I learn a lot from you, God Bless you and your Family , stay safe.

@joereyes5700 4 жыл бұрын

What temp are you running your griddle. If I do laminates they come out sticky. I wonder if I too hot. I had this problem so I switched plastic brands. Still sticky😐frustrating

@joereyes5700 4 жыл бұрын

And those came out awesome.

@casedonald1092 3 жыл бұрын

Needed more beer .

@markgrauel4578 4 жыл бұрын

The intermixing veins had a colorshift appearance too it seemed

@WorldsWorstFishing 4 жыл бұрын

Yeah in a way..they interacted well

@bicalipierfishing8951 Жыл бұрын

May I please have them

@joshbee5901 4 жыл бұрын

Could using turkey basters / squeezy bottles help to do dots?

@WorldsWorstFishing 4 жыл бұрын

I personally have not had much luck trying those kinds of things

@algwoutdoors9481 4 жыл бұрын

How about empty eye drop bottles?

@andrewpate1342 4 жыл бұрын

Where do you purchase your packaging for your baits

@WorldsWorstFishing 4 жыл бұрын

a plastic manufacturer in hong kong

@Lehnx3 4 жыл бұрын

Do some trout baits

@BOZZALLINI 4 жыл бұрын

I think the mess ups are sweet...id like to have them...where can i purchase those.....and more in future??

@WorldsWorstFishing 4 жыл бұрын

im sorry they already sold

@BOZZALLINI 4 жыл бұрын

@@WorldsWorstFishing do you offers sales to the public...looking for 3.5-5" exact colors if you have the molds 7" would be great for muskie fishing also

@JuliusLandman 4 жыл бұрын

Use a normal syringe without the needle to do the dots (wallmart sells them). Much easier.

@nikitasoch4303 4 жыл бұрын

Imagine an alabama rig of those baits

@nikkimadrilejos5602 3 жыл бұрын

Can i have that reject bait, please?

@matthomas6575 Жыл бұрын

I like the so called reject ones

@jameshagan613 2 жыл бұрын

What size eyes for my AI 4” hand pour swim baits?

@WorldsWorstFishing 2 жыл бұрын

6mm

@JohnSmith-cu5wl 3 жыл бұрын

Not going to lie but for me like the first one more but like but are good man

@WorldsWorstFishing 3 жыл бұрын

Yeah both definitely came out well

@michaelwebb4484 4 жыл бұрын

Would like to order some of those threadfin shad swimbaits?

@WorldsWorstFishing 4 жыл бұрын

DM me on Instagram

@manuelpinto7776 4 жыл бұрын

Hello I write to you from Asturias (Spain). I am interested in these molds to make shoft lures. Are they on sale and where could I get them? Thanks.

@WorldsWorstFishing 4 жыл бұрын

anglingai.com/6-inch-open-pour-swim-bait-mold/

@manuelpinto7776 4 жыл бұрын

Thanks for your quick response.I'll take a look at those products.I am very grateful and thanks again.

@Turtle_POD_THEminicatYT_. 2 жыл бұрын

I want to know if the baits is saltwater or freshwater.

@WorldsWorstFishing 2 жыл бұрын

That depends on wherever you throw it.

@bobkool333 4 жыл бұрын

How hot do you have your griddle?

@WorldsWorstFishing 4 жыл бұрын

315-ish...350 was too hot apparently

@malakiwood92 4 жыл бұрын

How can I get a hold of you for some custom poors?

@WorldsWorstFishing 4 жыл бұрын

I dont do customs