Hands-free Counting Machine 9000 v1.2 | Monev44

Hands-free Counting Machine 9000 v1.2 | Monev44 | 3D Printing Ideas

Рет қаралды 31,898

Ай бұрын

What if someone needs to count items while their hands are busy crafting? 🖐🛠 That's when the Hands-free Counting Machine 9000 v1.2 by Monev44 shines. 🌟 It's capable of counting into the thousands, making it ideal for large-scale projects. The number wheels can be easily disengaged from the counting mechanism, allowing for a quick reset to zero without the need to cycle all the way through. 🔄 It's simply the perfect project for 3D printing. Printed on Original Prusa MK4 from Prusament PLA Blend Viva La Bronze, Mystic Brown, Azure Blue, and Galaxy Silver. ✨
www.printables.com/model/7123...

Пікірлер: 43

@oKMz Ай бұрын

No matter how many magnets i buy, i always have the wrong size

@radish6691 Ай бұрын

Usually that’s me too but I just happened to buy 300 6x3 magnets a month ago…this is the perfect project to burn through them!

@Vodvarek_ Ай бұрын

True

@radish6691 Ай бұрын

The perfect OCD fidget toy!

@kehet4409 Ай бұрын

You post a video like this, but you don't show how 9999 changes to 0 ;_;

@marktsarenko3943 Ай бұрын

Idk about hands free

@audiorazor Ай бұрын

Way too many hands in this video for sure

@Numian Ай бұрын

You can operate it with your foot! 😀

@ScytheNoire Ай бұрын

I know, I see a hand pressing the button repeatedly. I don't think they know what hands are.

@stevebabiak6997 Ай бұрын

My dog might press it with his nose if it will get him a treat ;)

@mattmcpherson353 Ай бұрын

Sounds like a Home Depot Commercial.

@ben1techie Ай бұрын

Nice

@dgschrei Ай бұрын

Idk folks. I'm inclined to say if your design uses "50-60 neodymium magnets" to achieve what all the hand counters achieve with 0 magnets you're doing it wrong. Kind of a waste of magnets tbh.

@troncooo409 Ай бұрын

Yup, over-engineered.

@MrTartans Ай бұрын

😂welcome to printables

@Superwazop Ай бұрын

i have rarely if ever seen a hand counter that can both increment and reduce the count, building a mechanism that can do both while also being compatible with the particularities of 3d printing requires some specific knowledge of materials and mechanisms that you seemingly dont have

@KevinDiAmore Ай бұрын

@@Superwazop agreed

@Becvar80 Ай бұрын

@Superwazop It's still not hands-free if I have to depress a lever.

@djjoris Ай бұрын

The video stops with the counter on 9940... but what does it mean?

@thekikaz Ай бұрын

the trainee had pressed the button 9939 times

@SanderMakes Ай бұрын

It's how many days I need to wait before finally getting my MMU3 for the Mk4

@Prusa3D Ай бұрын

Hi Sanders. Please check the following article. help.prusa3d.com/article/shipping-information_2297

@barabolak Ай бұрын

🤔🤔Hey guys, are you reading comments?🤔🤔 I'm 100% sure people would see a huge improvement in quality if they had an ability to adjust the density of the bottom and top SOLID layers. If you could adjust it to 95% instead of 100% there would less plastic "sticking out" above each solid layer, which would result in nicer print quality. I hope you add this to your next update

@Prusa3D Ай бұрын

Hi. Most of the parameters described can be adjusted in Prusa Slicer. Thanks for your suggestions. I am sure other users will find them useful.

@ziffer90 Ай бұрын

i'll be more impressed and inclined to print if it requires no magnets at all

@radish6691 Ай бұрын

Tagline: "When your print counts, rely on Prusa printers and filament." Although with that truck commercial music maybe "...Prusa tough'll git 'er done" would be better. 😂

@75keg75 Ай бұрын

Presses by hand?

@TheSanpletext Ай бұрын

"The increment button is very generous in size, and place off to the side of the rest of the machine so it super easy to reach over and press it with a tired hand, or a side of a hand that still holding something, or a wrist, or an elbow, or if you put it on the floor a toe tap, or a heel bounce. And of course the display has a big enough font as to be readable from the floor. " Literal citation from model page

@CycloidalHeadache Ай бұрын

@@TheSanpletextokay Mr standoffish, not everyone cares about this little trinket to go read the documentation. In fact I would bet at least half the people shown this short probably don’t even own a printer.

@KevinDiAmore Ай бұрын

@@CycloidalHeadache Okay but it was still easy to see that you can easy hit that with your arm, foot.. or whatever else.

@75keg75 Ай бұрын

@@KevinDiAmore “or whatever else”….. yeah like someone turkey slapping it 🤣🤣 It’s a bit misleading to say “hand free” when all they do is use hands. Perhaps they just trolling for comments…

@MetalGearMk3 Ай бұрын

Need more info on the Prusa Pro SLX

@Prusa3D Ай бұрын

Hi. Thanks for considering our products. Please check more info in the following articles. You can also find email addresses to request more info in the links. blog.prusa3d.com/prusa-pro-our-industrial-product-line-at-formnext-2023_85533/ www.prusa3d.com/applications/prusa-pro-afs_236928/