Hands-On: SmallRig Lightweight Fluid Video Head

Рет қаралды 16,213

Күн бұрын

the gear I use:
kit.co/urbn.pxl
Lightweight Fluid Video Head 3457B - DE Page*:
www.smallrig.com.de/smallrig-...
Lightweight Fluid Video Head 3457 - US*:
www.smallrig.com/smallrig-lig...
on Amazon.de:
amzn.to/3Sg6Cf8
------------------------------------------------------------------------------------------------------
00:00 - Intro
00:15 - Unboxing
03:07 - Hands-On
03:29 - Manfrotto MVH500AH
04:02 - SmallRig Fluid Video Head
05:54 - Tamron 28-75mm vs. Zeiss Planar 50mm
06:53 - Pan & Tilt Test
07:47 - Conclusions
------------------------------------------------------------------------------------------------------
Disclosure:
I bought all the gear with my own money, SmallRig did not provide any of the gear and does not pay me to do this video. SmallRig has no influence on the video and does not get to see the video before publishing this video. It's all based on my experience using the gear for my client work and this channel. Affiliate-Links and Promotion codes will earn me a small commission, which helps me run this channel.
------------------------------------------------------------------------------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/all-th...
License code: OONGRBBRPAPM14XO
uppbeat.io/t/kidcut/get-love
License code: 8DHQBH755WUMQP0Y
uppbeat.io/t/prigida/mellow-bop
License code: PI7CJ5OZFRGFW4FW
uppbeat.io/t/pecan-pie/the-bi...
License code: VKDHBYCYIOXRKLVC
uppbeat.io/t/sensho/clarity
License code: CISSJJQFDUDCM3RT
uppbeat.io/t/all-good-folks/m...
License code: JRGUTAOJJFKAIG6M
uppbeat.io/t/prigida/beacon
License code: 9GWGGO2XQU2GH3HZ
------------------------------------------
my page:
/ urbnpxl
my instagram:
/ urbn.pxl
#SmallRig
------------------------------------------
Provisions-Links / Affiliate-Links
Die mit Sternchen (*) gekennzeichneten Links sind Provisions-Links, auch Affiliate-Links genannt. Wenn Sie auf einen solchen Link klicken und auf der Zielseite etwas kaufen, bekommen wir vom betreffenden Anbieter oder Online-Shop eine Vermittlerprovision. Es entstehen für Sie keine Nachteile beim Kauf oder Preis.
Disclosure: This post may contain affiliate links that earn me a small commission, at no additional cost to you. I only recommend products I personally use and love, or think my readers will find useful.

Пікірлер: 36

@MrPhilbautista 2 жыл бұрын

Terrible job trying to sell the head but great job showing us how it performs. Thanks for the review but I think I'll pass. No point buying a fluid head if it doesn't pan and tilt smoothly. And thanks for the honesty. KZfaq needs more of these type of reviews.

@trevorwild195 2 жыл бұрын

TQ for the review!

@MarkusSenior 2 жыл бұрын

Interesting Video Michael. I was just looking for some small head for backpacking.. Thanks for the testing and review. Cheers from LA.

@pianoman6639 Жыл бұрын

Many thanks I was just about to order one but my gear would be too heavy . Saved me from having to return and order another . Many thanks

@grevestudiotv1755 Жыл бұрын

Hi Michael, thanks for the review. You´re right, it´s not a fully usable video head, more an alternative for a ball head. We use often additional cameras on stage which are not operated when we film concerts. Setting up the right angle for these cameras is easier with that tiny video head than using a ball head. The handle can be shortened, therefore it doesn´t stick out if you don´t want that. There is an even simpler version of this video head from SMALLRIG for less than 50 €.

@drivesurfcamp 2 жыл бұрын

I’ve got one and have been using with my Canon RP a 100-400mm plus a monitor and mic and it works like a jam. Love the setup.

@MichaelSchmidt_UrbnPxl 2 жыл бұрын

ok... well as long as you are not having to do a lot of panning and tilting it should work ok. 😅

@drivesurfcamp 2 жыл бұрын

@@MichaelSchmidt_UrbnPxl I do quite a bit of surfing videos and photos so don’t really do extra smooth shots. Just need the ability to move quickly to frame the surfers and the waves..l

@GiuseppeGessa 2 жыл бұрын

I was wondering to use that video head with a spotting scope for recording animals videos, but now I not sure if it's the right choice. Anyway, thanks for your review!!!

@martinlundkristiansen3859 2 жыл бұрын

Wow. That camera has A LOT of rolling shutter. Even at slow pans it’s showing.

@amitdutta8768 Ай бұрын

Thanks Michael for the review. I have Nikon D500 + 200-500mm, totaling 3.150 kg. Do you think the Smallrig 3457 fluid head is sturdy enough to hold it ?

@RomanKumarRai 2 жыл бұрын

Thanks for the review and the test you did over the large camera rig with big lens. i have been searching over internet to see this kind of review for this Fluid head by smallrig. And i think its not good enough for me.

@Bassmunchkin1 10 ай бұрын

Hi Michael, I've just received this head and overall I'm very happy. BUT when it comes to the mount slide lock, I'm am completely worried that this will not hold the slide in place unless like yourself, I only attach a very light weight lens. I also agree that the panning is not smooth at all I have an R6 MKII and will either use one of my 3 RF lenses - 15 to 35, 24 to 105 or 100 to 500. Even with just my R6 MKII body, I'm finding that the mount slide lock when turned until it touches the body with the "lock" symbol (as tight as it can go), that with a bit of finger pressure, I can still slide the mount either way. So there's no way I'm going to be using this head as I have completely no confidence in keeping my gear safe, how did you find this yourself. Maybe not trying to slide the mount and just going on faith that it would stay put, would of meant that I didn't think about this. When I get/find an allan key small enough to try and remove/adjust the lock lever, maybe it will lock nice and tight, but with all of the levers being so small for my mid size fingers, I'm also finding that my finger and thumb is taking a beating, so I might just bin the head and look for a more friendly adjustment one like the Manfrotto that you had on your tripod to start with.

@bentonpix 2 жыл бұрын

Thanks for your video! I just received this head and found the tilt to be reasonably passable, but the pan is a miserable fail with way too much friction overall and a stiction point at the beginning which makes a smooth pan nearly impossible. If Small Rig can fix the panning, this would be a real winner in the extremely compact category! But as it stands, I'm pretty sure I'm sending it back.

@tiitulitii Жыл бұрын

No problems here.

@321mogul Жыл бұрын

This review and many many other TOTALLY MISS 2 Awesome Features!!! 1. You can use allan key to adjust primary Pan and Tilt by inserting it into the hole on bottom where you screw onto the tripod. The built in allan key reaches adjustment bolt easily and can go from much looser to much stiffer than it starts!!! 2. I've seen people complaining about locking lever hitting..... the top pan lock, tilt lock, and handle lock all have built in pull out disengage to effortlessly move levers to convenient position kn the fly with 0 tools. Brilliant!!

@bentonpix Жыл бұрын

@@321mogul Thanks for your observation, this is good to know. Small Rig needs to know the features of their own head! I contacted them about the issue before I sent it back and they offered no solution for adjusting the drag. But if the friction adjustment affects both the pan and tilt at the same time, getting the same resistance on both axis equal is probably not likely since they’re not equal as shipped from the factory. (At least the copy I received) After your adjustment, do you find that both axis are equal in resistance or still unequal?

@321mogul Жыл бұрын

@@bentonpix hi Benton, agreed small rig needs to explain there products better. In answer to your question as I crank it tighter the resistance gets closer and closer together. With it cranked tight like I have it atm for using my gfx 50r with vintage pentax 646a 120 macro it feels pretty balanced. Tho I'm using a telephoto support rail to balance weight of camera and that helps a great deal. Without it the crazy long lens makes the tilt feel much looser. Balanced however it's pretty damn close especially if I dont 100 percent open the tilt lock. I've never received such a complicated oeice of kit that had 0 instructions in box, like not Single word in any language just heres your thing work it out. Their site is no help either. People miss the way the locking levers can be pulled away from head and repositioned on the fly also.

@KaptainCanuck 7 ай бұрын

What model? It really helps to put such info into the title and description.

@MichaelSchmidt_UrbnPxl 6 ай бұрын

well I have it iin the description ... even tho' I had to update it

@BackpackeRom Жыл бұрын

Hi Michael. What’s the exact name of the Fluid head you use? you earned a sub from here. Greetings from Tanzania

@MichaelSchmidt_UrbnPxl Жыл бұрын

Hey... thanks ... sorry for the late reply. The smaller one is the MVH500AH and if you need a bigger more solid go for the MVH504XAH

@KaptainCanuck 7 ай бұрын

The simple answer is to get a longer plate for the camera.

@MichaelSchmidt_UrbnPxl 7 ай бұрын

yeah sadly that not really the problem ... the heat is just too weak for the wight / size

@cinemavius 2 жыл бұрын

do we have any choices to change the plate for longer version ?

@MichaelSchmidt_UrbnPxl 2 жыл бұрын

well you always could use a longer arca swiss plate but not sure it makes a big difference in terms of balance

@theartofloving 6 ай бұрын

Your quick release plate is TOO SHORT to balance your rig. Nothing more.

@poppers22 Жыл бұрын

you say funny, I say arthritic friendly. (less weight the better!!!)

@JJ_Khailha Жыл бұрын

I’m not convinced by your conclusion. The issue you had seemed to be that of balance rather than exceeding weight limits. I would like to have seen a fully kitted out 3-4 kg cage rig which, on rails, could have been balanced suitably.

@JJ_Khailha Жыл бұрын

Have just looked up the specs and the weight capacity is 5kg.