Discover ML10X: www.morningstar.io/ml10x

OMG... this is litterally what I have been looking for forever. Missed the initial release. waiting on second run.

You guys kill it so hard. Way to deliver

This is hands down the most conclusive info video on any device. All questions were answered at the same exact minute they arose in my mind. Off to fetch a USB-C cable and do some programming.

I really would like to hear it action. I am mostly interested in controlling my stereo fx. This has been exactly what I have been looking for.

You should should do a video with showing how many possibilities are unlocked with the ML10X and a H9. Pitch Shifting at the front of your overdrive chain, Trem/Chorus before or after an amp sim, Delays/Reverb in parallel.

Im so excited, Ive ordered both the ML5 and ML10X! awaiting delivery tomorrow! The Morningstar eco system is not only innovative but hugely affordable! Im tempted to buy another ML10X! OH! and commenting about the video. In music school I learnt a good saying which works great for TRS / Inserts and various other cable configs... :) (TRS) -> (OTHER ENDS) RING -> RIGHT RED -> RETURN

This exactly what I have been looking for my rig. I want to run 2 delays in parallel for some sounds and back into series for other sounds. I use my Eventide Pitch Factor for a additional delays sometimes. I have micropitch without delay and other pitchbasd presets. This Morningstar ML10X is exactly what I need. I only need it for my stereo section of my board. I could rackmount the stereo fx with the ML10X and utilize my Rocktron MIDIMATE controller. Patch in my Rack FX in the loop bay. I am very excited by this product.

As I look down to my guitar pedal board I have ten pedals........great job guys looks great!

Super cool product, I don't have nearly enough pedals to have the need for this but if I had them I'd seriously consider getting one. The only thing that is really odd to me is the jack placement with that snaking pattern. Could have had In and all Returns in the top row and Out and all the Sends in the bottom row so it'd be easy in a pinch to swap things without having to look at the back panel (e.g. second row of jacks is Send / Return Loop A).

Thanks for this device! Exactly what I hoped you would create!

Would like to see how you configure multiple Stereo Pedals in parallel with the ML10X

Wow is right. This can really clean up tone! I might have to get this.

Awesome! I need one... NOW!

In case you've never owned something like this, know you're probably going to have to spend a significant amount of money on top of the unit itself if you don't already own stereo-to-mono splitter cables. The product comes with nothing but the unit itself. Therefore, if you want to be able to run say 10 mono pedals instead of only 5, you'll need to buy 10 stereo-to-mono splitter cables

Any updates on the the mc6 pro ?

Complete game changing product!

Great product! But it would be nice to have (in advanced mode) the possibility to set up the gain (or better, gain reduction) of the different signal path (like the SoundSculpture Switchblade does).

Looking forward to your wet dry wet set up explanation:)

You could have mentioned that if you´re running the 4cm you can use input and output jackets in combination with your dedicated stereo split cable to be able to use your fx either in front of your amp and time based fx in your fx loop WITHOUT sacrificing a loop for that like in most other looper! That is also a great feauture on the ML 10x.

When will we get those additional wet dry wet and dirt videos! I absolutely love what I am seeing and I hope this is for me.

Super interesting product

the future is looking good

ES killer… builds on what was so great about the ML5.

It would be nice if the unit had a means of checking the phase of each pedal's out against the others in the chain and the source - which might require a signal generator in the unit being patched to the first pedal's IN. Switching and routing signals is just a portion of what requirements a professional rig has.

this is dope. i do similar with an iConnectivity Audio4 i wish it had more i/o but it also allows m to use my iPhone...

This is most interesting to me.

In simple mode, I find the two lines for Input Tip connection and Input Ring very confusing. I have tried searching all the available resources provided by Morningstar to understand the significance of these two options, and have not been able to figure this out. This video touches very briefly on this, but basically dismisses the Input Ring as something the user doesn't need to worry about. Could you please provide more, clear information on this? Thank you.

Morningstar. I like the name 😉 God bless 🙏

Holy smokes…probably time to put my 2 ES-8 units up for sale 😂

Awesome, too bad you're out of stock as well as on the MC8, I wish you could have a better deal with shipping couriers to make shipments in Europe less expensive as your official distributors want to charge almost TWICE the price of any of your products

Hey guys, super video - this means you could potentially split parallel signal chains to 2 different outputs ?

Thanks for the video…..I just received my ml10 but to connect with splitters is about as clear as mud.

I have no clue what I'm doing wrong. I'm trying to set up a simple mono only preset with 4 pedals. Tipa, B, C, & D. I have all of them engaged and green, but for some reason, none of my peddles do anything when I switch to that preset. I still get signal to pass through and turn the pedals on manually, I thought the whole point of creating loops was so that I wouldn't have to do that

Marvelous

Anybody want to buy my ES-5? This ML10X creature just made it obsolete. Love it! - Gotta have it!

Please tell us how to use it with fuzzes properly! 😪 I e-mail you a few day ago and haven't received an answer! Regards!

Any info on when we'll be able to have cc loop bypass using advanced mode? I run series and wet/dry depending on songs/artists im working with?

Hey, will you ever consider an update that allow ml10x to rotate the screen? I think this will be very helpful when setting the board

Me gustaría escucharlo en acción y poder identificar si tiene latencia. Me hubiera gustado que el dispositivo tenga swtiches para evitar agregar una pedalera Midi.

Can I use this to put all my pedals away with the switcher into a rack and just control the signal chain with MIDI via software / DAW?

I wonder how this product can be used if I want certain effects in fx loop

Could you make a video on how to combine it with the eventide h90

will there be an iOS version of the editor?

How is the quality for critical listening? I mean for line audio gear (studio quality)

Is it possible to flip the ML10X display if it is installed in a way that requires it?

Can we get a test with a guitar going straight into amp, and then the same guitar going through the ML10X with all the loops engaged with cables going straight from in to out? (To the same amp...)

Is Morningstar based in Asia? This person sounds like a Singaporean or Southeast Asian.

Can I use my standard pedal board cables and instrument cables for the input and final output with it? I have just purchased one and have it all hooked up but am currently getting no sound…

Any idea when these will be in stock again?

So if I add some pedals with midi presets in a chain, do I get the option to choose which preset will be active in that particular chain? Let’s assume I’m connected to a MC6 PRO.

I am very intrigued. But 5 stereo input sounds a bit underwhelming. Is there any plan for a bigger unit? Or is it possible to run multiple units together? Also, what about phase reversing?

Are you able to use it as a splitter to send to signal to an effect in a parallel mixer? Also, can you use a loop as a control switch? For bypass on/off switches on equipment. I'd like a cheaper alternative to the GCX for a rack setup but it is not clear whether you can do this on the ML10X. Thanks.

So with the advanded edit mode it is possible to put an effects pedal only on the left channel? if so really cool

Is it same size like ML5? I think the drawback with that was that it won’t fit under pedalboards, ie. Temple Audio. It’s height should be 1 cm smaller for safe use.

I keep waiting for mc6 pro to be released. I would like some information.

can i run 2 of these in my rig and link them?

Lets GOOOOOOOOOOOOOOOOOO!

Great, may I use it in stereo mode into my amps FX loops (2 amps for stereo) which drive higher signal level than the 'before amp' circuit ? What is the max signal level ?

wow

With something like a El Cap or a Mercury M7 with a trs stereo input, would I be able to just go TRS to TRS to the pedal and not worry about the splitter and just have the trs to ts ts on the return for the stereo out?

So... how's it going?

Is it possible to use this with a Kemper or Helix? I would like to do something like add a big sky to after dual amps in the Helix but then send them back to some effects in the modeler.

1) Are these loops buffered or true bypass loops? For parallel I guess there should be an active circuit for compensating the level drop, but what about series? I'm curious about signal coloring. 2) Can a single trs jack act as an in/out? I mean, can all tips and rings be ins and outs and viceversa?

Can the buffer be turned off if I want to have a fuzz in the chain?

can you control the phase in parallel signal chain ?

Holy shite!!!!!!!!

Do a looper video please Rc 5 500 600 any thank you

いつ日本で販売なるんだろううか・・・

MIDI over USB? I didn't hear this mentioned.... did I miss it? Need USB MIDI to integrate with a DAW, right? Do you manage gains with parallel loops? Each part and the end result all need to run at unity gain, for any configuration. This is not an issue with strict in-series circuits, or in stereo circuits (which is really just two separate strict in-series circuits that are not summed). The system should should run a full-voltage signal into each parallel loop, and then appropriately attenuate each result before summing. Otherwise, you'll have to adjust the gain knobs on each pedal for any loops with parallel sections. And if any presets use different numbers of parallel loops, you'll have to *readjust* any common pedals. (If you turn off half of your parallel loops without managing the gains automatically, you are cutting your signal volume by 1/2, so you need to turn the remaining pedals up). Can you create presets that route the signal through the same effect twice? I.e., place an effect block into a preset twice? Or, can you create intentional feedback paths in your block diagram, feeding an output back into an input? If you demonstrated this, I missed it.

When are you guys coming out with a real flagship product? The MC8, could be an MC12, and you implement the ML10X? I'm not buying multiple devices to handle switching. I've held off buying anything from you guys for years, and still consider the RJM mastermind pbc10 to be superior. I will keep an eye out for your product releases to see if you listen to your customers or not.

If I have to use a computer, I am OUT. Sold my MC8 last week. I will wait until you rlease aproduck that does not need me to hook up to my mac. Just like Boss did with the Es-8.

Every video I’ve seen that you have made doesn’t show how this connects to midi to actually work, as in hands-on.

Splitters are too bulky better to use a trs to 2xts

Can we get a ML20X ? Yeah, I got a lot of pedals…

He's clicking everywhere and he knows what every button does. clicking by mistake " where did it go?!?!" Start pressing random keys

hahah too sNice tutorialt

fr

The RJM Gizmo X is way better

That’s extraordinary. I guess it’s digital for it to do all that.