Impressive and you explained everything perfectly-THANK YOU!
@HandyGuy20166 ай бұрын
Thank you
@knobstonestickbows49622 жыл бұрын
Great ideas. Usually only see this ingenuity in my own welding/fabrication profession. Thats basically how I enclosed mine but with a garage door instead. Great job! Thinking ahead👍👍👍
@HandyGuy20162 жыл бұрын
Thank you
@formerzygote48043 жыл бұрын
Did something similar to this 10 years ago with a 19 by 20 carport I bought second hand off Craigslist. $300 for the carport, $600 for new sheet metal and 2” red steel square tube, $350 for an 7’ roll up door. Big mistake I made was not putting it on a slab. It was on a gravel floor like yours and everything grew mold including the interior panels and all my equipment. That would be my only suggested change. Nice job!
@jafinch783 жыл бұрын
With a vapor barrier below the slab I'll note also is a great idea from what I understand and am planning.
@magicone93273 жыл бұрын
Was the building insulated or just exposed metal?
@formerzygote48043 жыл бұрын
@@magicone9327 It was just exposed metal. Had I known how much moisture would come up thru the gravel, I’d have put 6mil plastic down before I spread the gravel. I’ve since poured a slab and dragged the shed on to it. Much better now and absolutely no moisture issues for the past year.
@nicolausranker85213 жыл бұрын
I love it. Simple and functional. Hopefully will be borrowing some of these ideas here soon. You might think about putting a piece of tin a few inches into the gravel before adding more gravel. It would help keep the wind and critters out of your shed. Do like a 5 inch tall piece you can replace easily if it rusts.
@HandyGuy20163 жыл бұрын
Great idea
@mr.stirfry931011 ай бұрын
Sweet now i know how I am making my shop. Thanks you just saved me 5k plus.
@janedoeacerpcemail9952 жыл бұрын
I like the horizontal siding better. It looks more like house siding. Thanks for this informative video!
@dougmitchell203 жыл бұрын
Looks great man. I was having a hard time considering closing in a car port until now!
@JamesDedmon3 жыл бұрын
I did something similar. The biggest differences is I had the sides installed, then a concrete floor poured, then framed the ends with 2x4 attached by rivet nuts and bolts in the attachment points with the carport. Anchored the bottom with concrete anchors. Framed in a walk in door an a barn door that’s a similar design.
@utraceman3 жыл бұрын
Nice, I bought a Carolina Carports bldg several years ago and closed it in also. Good Product.
@howardclem98854 жыл бұрын
Very nice! That should work great for you! I have a carport to back my open trailer in work’s great 👍
@rolexmd699 ай бұрын
Nice work.
@paulbetka29663 жыл бұрын
Lot's of good ideas. 👍🏻👍🏻👍🏻🇺🇸
@davidschroeder16513 жыл бұрын
Not to be a downer but you should put double door on each end. I bought a property with one of these on it 20x50 with 15’ of it closed in with a 8’ garage door and a small window in the back. In the summer it was so hot I couldn’t stand to be in it for more than 5 minutes. Tore it down and put up a wood shop in place of it. But those shade trees should help. Course I live in South Texas where the summers can melt steel. Good job 👍
@HandyGuy20163 жыл бұрын
I would, but it buts up to the property line so I will probably put in a vent fan eventually.
@magicone93273 жыл бұрын
Insulate with R-Mac ridged high R value and it will not only be more temperature moderated it will not condensate/sweat.
@HandyGuy20163 жыл бұрын
@@magicone9327 Great tip!
@GbodySS_LsX7 ай бұрын
What size is your carport brotha
@HandyGuy20167 ай бұрын
20' x 26'
@eddie81663 жыл бұрын
Great job looks very good, Now I want to do one
@justd02ofus3 жыл бұрын
Thanks for the great ideas.
@HandyGuy20163 жыл бұрын
Absolutely
@cliffordjordan37904 ай бұрын
You are a Genius Bro
@rnxpx Жыл бұрын
The doors are great! I'm looking into removing a huge sliding door on my pole barn and looking for ideas! Thanks!
@igorfed993 Жыл бұрын
Awesome! This is similar to what I what I do too! Thanks for the video!
@thomasgregory8941Күн бұрын
Good job
@HandyGuy2016Күн бұрын
Thank you
@logansimpson3054 жыл бұрын
Great video
@jefffoo76663 жыл бұрын
Very creative ! GRET Work !
@cattalkbmx6 ай бұрын
Looks really nice, thanks for sharing. My concern is issues of mold and rust due to moisture getting in through the gravel. Did you do anything to prevent this or has it not been an issue for you?
@HandyGuy20166 ай бұрын
It hasn't been an issue since the building is not air tight (vented along the eaves)
@MrJinwright3 жыл бұрын
Thank you for sharing
@Ethan-mn9gi3 жыл бұрын
This is exactly the video I was looking for it’s not the same as mine as mine an old carport that is wood structure that is solid and kinda like a mini pole barn that we used to use to cover a section of are dog kennel when we had coondogs and it’s concrete pad etc, but the roof slants all the same direction but we already closed the sides and I wanna frame it and put swinging doors on it so I can use it as a shop instead of kicking cars out of the garage to work on something or do motor swaps in
@HandyGuy20163 жыл бұрын
Glad to help.
@HighRidgeHandyman3 жыл бұрын
Nice space👍🏻 coming out good
@HandyGuy20163 жыл бұрын
Thank you
@45valk2 ай бұрын
Very nice. I am going to use aluminum for the doors because of the weight. I wonder how oversized rivets would work instead of the framing bolts? Maybe easier to cover with the tin installation due to the bulging from the bolts sticking out.
@HandyGuy20162 ай бұрын
Great ideas! Let me know how it works out.
@goodingwashington60993 жыл бұрын
Wow amazing
@jakejohnson77142 жыл бұрын
Great original work!
@HandyGuy20162 жыл бұрын
Thank you, this shop has been very useful.
@snipestaxservice79832 ай бұрын
"Deter a thief if I can as oppose to trying to catch"em after the fact " You said something.
@takishabaker75206 ай бұрын
That's nice! Even though its' awhile ago.
@aftech7268Ай бұрын
Looks solid and pretty
@HandyGuy2016Ай бұрын
Thank you
@coloringoutsidethelines97553 жыл бұрын
Well Done! Thanks for showing all your details. What did you use to paint some of your frames? I like that you have put HD bent rebar (#4's?) into the ground as hold-downs. Did you set them into conc. by chance or just hammer into ground? Was a permit required for this by chance? I was thinking of getting one of these myself but didn't want to have to deal with the headache of permitting. And, we do get lots of snow here in N.E. PA, so I would have to consider the perlins on mine (great suggestion Gene). To considerably strengthen you front door wall/frame, I would really suggest you put in a diagonal support brace (flat bar maybe?) from the bottom hinge corner to the opposite upper corner (on the inside of the frame) near the eave on each bay on either side of the doors to prevent the weight of the doors from racking those individual bays...maybe even a diagonal inside each door panel as well. Lastly, I would strongly recommend installing a light-gauge angle over the top seam of your doors (along the header) that you can put a slight outward/downward pitch to the bottom leg to help shed water (drip edge - at least a 1-1/2" bottom leg). This will make the doors last so much longer. Good luck!
@HandyGuy20163 жыл бұрын
I called in a location on utilities before the carport was installed, to make sure the area was safe for driving the rebar. I used marine grade steel enamel paint on all the framework.
@magicone93273 жыл бұрын
Did you have problems with door/hinge swing clearance after installing siding? Those style of butt hinges with no swing away clearance to by pass finished wall thickness always cause interference. If the but/ Boss of the hinge is connected between the wall and door frame you can then extend the hinge knuckle outward for clearance of siding and the the door will open without pinching the wall. In this case the door will only one as far as the roof line drop interference allows and it will still not open to 90° without pinching if siding is not set back from hinge swing area.
@HandyGuy20163 жыл бұрын
They work great, I can swing both doors open to about a foot away from the building. I have had enough hinge mistakes to know what you mean though. Had to learn the hard way lol.
@kaseycasece13403 жыл бұрын
MOST BASE METAL CARPORT IS 4 FT. CENTER INSIDE , I DEAL FOR 4 X 8 INSULATOR BOARD FIX PERFECT
@HandyGuy20163 жыл бұрын
Great idea 💡
@Gokywildcats113 жыл бұрын
Job well done
@dethmaul3 жыл бұрын
Very high quality.
@lorrainagoodwin34933 жыл бұрын
Looks good
@magicone93273 жыл бұрын
Great job! Here is what I've always wondered about when doing this. Under high wind the lift that buildings are under caused by the difference between the inside high pressure under the roof, and the low pressure outside above the roof. This difference in pressure causes a lift against the buildings anchors to the ground. Just like an airplane gets its lift from the pressure difference between the areas above and under their wings and it's body. When closing in a building that pressure difference is greater since the building is now closed in and the high pressure inside cannot escape readily to equalize and abate the lift force. If additional hold downs/anchors aren't used the building runs the risk of wind lift and damage from the event. Thoughts. Am I crazy? Am I overkilling?
@HandyGuy20163 жыл бұрын
Maybe over thinking, maybe not, but it does have 200 mph wind rated anchors.
@magicone93273 жыл бұрын
HandyGuy 2016 200 mph anchors under the original build?
@HandyGuy20163 жыл бұрын
@@magicone9327 correct. Before I added sides.
@lsxjunkie Жыл бұрын
Nice video! Any update on the finished results?
@HandyGuy2016 Жыл бұрын
I did a few videos after I painted it and finished the inside. They are on my channel if you want to check them out.
@larrywoodruff75303 жыл бұрын
Seen many of these framed in with basic 2x4s
@angelanuccio2167 Жыл бұрын
where did you find the square tubing shed kit you started with? All the ones I've found have round tubing.
@HandyGuy20169 ай бұрын
Cardinal is the brand
@mfkvlog3903 жыл бұрын
Why the roof like that? How the rain will flow? The roof will rusty if the water not flow correctly.
@HandyGuy20163 жыл бұрын
It's a very strong design, and the water does have adequate runoff.
@lorrainagoodwin34933 жыл бұрын
I'm trying to box my carport in how many sheets of osb board will I need and 2x4 will I need? It's has a concrete floor and I want to box it my car saab in parked in it now how big it is plz give me a idea how many sheets and boards I need please and thank you
@HandyGuy20163 жыл бұрын
How long? How wide? How tall? How far apart will the 2x4's be?
@theallaroundguy23994 жыл бұрын
Hope you’re going to paint that beast
@HandyGuy20164 жыл бұрын
Absolutely 😊
@VF1Skullangel3 жыл бұрын
I wanna build something like this when I move to Florida but I'm worried about the hurricanes and tornadoes destroying it.
@HandyGuy20163 жыл бұрын
Mother Nature can be cruel.
@brockdyncatron37753 жыл бұрын
Use rebar to secure it to the ground or anchors if on a slab. Also use hurricane straps.
@GroundFN12 жыл бұрын
Great job
@HandyGuy20162 жыл бұрын
Thank you
@haniballecter76052 жыл бұрын
you are doing a great job
@HandyGuy20162 жыл бұрын
Thank you Hanibal
@towboater793 жыл бұрын
Love it
@HandyGuy20163 жыл бұрын
Thank you
@jefferyhopcus83003 жыл бұрын
Nice
@naturallydope2473 жыл бұрын
How are you sealing out the bottom to prevent critters and creatures from coming inside?
@HandyGuy20163 жыл бұрын
Filling any gaps with more chat.
@naturallydope2473 жыл бұрын
@@HandyGuy2016 More chat? What's chat?
@HandyGuy20163 жыл бұрын
@@naturallydope247 the gravel I used for the base is chat.
@Gokywildcats113 жыл бұрын
How is it anchored to the ground
@HandyGuy20163 жыл бұрын
Giant screw anchors about 24" long.
@guyina4x499Ай бұрын
If you can weld why didn't you weld it instead of self tappers?
@HandyGuy2016Ай бұрын
Easier to modify or disassemble in the future.
@handylandlord4 жыл бұрын
Looks good!!
@HandyGuy20164 жыл бұрын
Thank you, it turned out nice and I will be painting it soon.
@bobbytaylor31774 жыл бұрын
Will you paint the exterior once done
@HandyGuy20164 жыл бұрын
Yes I am, I don't want to be an eyesore in the neighborhood.
@reiexcavation6707 Жыл бұрын
How thick is the steel u used for door? Thank you! Got pix of finished doors?
@HandyGuy2016 Жыл бұрын
1/8" wall square tube 3"x3"
@CullMeDave3 жыл бұрын
Good Shit Mate
@HandyGuy20163 жыл бұрын
Thank you
@alonzosamaniego64243 жыл бұрын
Did you make a video with the finished product?
@HandyGuy20163 жыл бұрын
Yes, there are more videos on it.
@alonzosamaniego64243 жыл бұрын
@@HandyGuy2016 can you post the link on here? I have a similar project I'm wanting to do. Thanks!
It's a "Cardinal" car port, www.cardinalcarport.com
@isaacaleman76053 жыл бұрын
How tall the walls?
@HandyGuy20163 жыл бұрын
8 foot sides, 13 feet at the peak.
@PeeweesLawnCare3 жыл бұрын
What size
@HandyGuy20163 жыл бұрын
24' x 26'
@gene89333 жыл бұрын
Do you get a snow load? because in between every 5ft span with just 4 inches of snow you will have approx 1700 lbs of snow with 8 inches you will have approx 3400. ‘’About 7000 14000 lbs total.you will make that metal roof into a bathtub suggest you run some purlins in between and some cross ties. Or it will fold like a lawn chair if you don't get snow you should at least put cross bracing for wind sheer. don't take my word for it ask an engineer. I don't want to see all your hard work come down to good luck.
@HandyGuy20163 жыл бұрын
We hardly ever get snow here, maybe an inch? I know that all the carports sold here are designed the same, for the past 20 years at least.
@larrywoodruff75303 жыл бұрын
I've had 4 ft of snow on mine, no issues
@santiagodominguez25223 жыл бұрын
I have build carport garages for over 12 years l think l need to teach how to build those buildings step by step you are probably saving about 3k
@Rite_price Жыл бұрын
😊
@wolverineids22 жыл бұрын
Where did you purchase it at?
@HandyGuy20162 жыл бұрын
Cardinal Carport dealer locally.
@stevenreeves47662 жыл бұрын
probably should paint it before installing it.
@HandyGuy20162 жыл бұрын
Good advice.
@stevenreeves47662 жыл бұрын
@@HandyGuy2016 do you have pictures of the finished product?