Hangkai 18 Unboxing, Setup, and First Start

No video

Hangkai 18 Unboxing, Setup, and First Start

Рет қаралды 22,194

Күн бұрын

Today we are unboxing and testing out our brand new 18 HP Hangkai Chinese Outboard. We will show you what all comes in the box, how to fill the lower unit (foot) oil, and starting the motor up for the very first time. We were surprised to see her fire up on the first pull!
**And yes we know you add the lower unit oil through the drain plug.**
If you have any questions about this motor please leave a comment and we will get back to you. If you'd like to see more, please consider subscribing!
Amazon links to products used (we bought the oil and pump at Walmart):
Hangkai 18 Outboard: amzn.to/3n2V1Q9
Outboard Stand: amzn.to/3Nas9A6
Gear Oil: amzn.to/3y6MDVT
Gear Oil Pump: amzn.to/3QBLqgx
As an Amazon Associate we earn from qualifying purchases.
Follow us @hufflergarage on:
Instagram: / hufflergarage
TikTok: / hufflergarage
Twitter: / hufflergarage
www.hufflergarage.com
0:00 Intro
0:27 Unboxing
1:53 How NOT to add Lower Unit Oil
5:46 Engine Overview
7:16 First Start
8:54 Outro
#hangkai
© 2022 HGM Productions LLC. All Rights Reserved.

Пікірлер: 83

@IsmaelPR32 2 жыл бұрын

Oil is added from the bottom drain screw until it starts to drip from the top hole then you're filled. You're creating pressure the way you're doing it.

@HufflerGarage 2 жыл бұрын

Yeah we figured that out when the Hangkai 12 manual showed the correct procedure. Much easier that way!

@avidwaterfowler7522 Жыл бұрын

Yeah, that’s the only way to add oil. Otherwise you’ll be low on oil in the lower unit.

@timmyivey2214 4 ай бұрын

You are so right

@patrickprice2017 Жыл бұрын

Fill oil from the bottom. Bleed air off from the top. That is also how you make sure you don’t trap air inside the lube out and verifys that it’s full when it spills out the top hole

@calebrodriguez3748 Жыл бұрын

Really appreciate these videos, thanks for posting.

@HufflerGarage Жыл бұрын

Glad you like them! Thanks for watching!

@stillfishing4sheep Жыл бұрын

Two thumbs up ! Thanks for the advice on what not to do. I think you have a healthy self esteem to be able to post an honest video of how easy it is to make a mistake. I have made many mistakes and can sympathize with you. Keep up the good work brother!

@HufflerGarage Жыл бұрын

I laughed when I watched it, so I figured it was worth leaving in. We had done 5 other lower units that way without any issues before figuring out that it was wrong. Thanks for watching!

@ct1762 9 ай бұрын

@@HufflerGarage so the 5 other gearcases have blown pinions im assuming. its impossible to fill these from the top!

@tim196868 Күн бұрын

Got to add the oil from the bottom take the top screw off take the bottom screw off put the hose in the bottom and then fill it up. And your fuel mixture should be 25 to 1 for the first 10 hours. Then 50 to 1 after that.

@stephengalvan7722 Жыл бұрын

completely honest she sounded great

@eprohoda 2 жыл бұрын

Huflfer. Wow-awesome .;)

@philpersaud2965 2 жыл бұрын

I’m watching you and I will decide to purchase this or not haha I’m debating bro

@abecoulter8550 11 ай бұрын

they are normally shipped with gear oil

@BuritoBandito 2 ай бұрын

Can i charge a marine battery using the hangkai 18hp outboard motor? If i can, what parts would i need to make this happen? Thanks!

@michaelh7527 Жыл бұрын

You have me sold on this motor. I have a 14ft jon boat with a 9.9. The old motor is just worn out and needs more than it's worth. A new Yamaha or Mercury is really expensive. Everything I have found for sale for used looks great in pictures, but is junk upon inspection. All I need is something for about a 3-4 mile run to my fishing hole. Or a bit longer for hunting trips. But it seems as if this is a good motor for someone like me that is affordable.

@dustinj7650 3 ай бұрын

I'd be careful with these. Reviews online seem to support that the motor will work for a few years, but all the peripheral stuff will fall apart (paint finish, fuel filter/lines, trim mechanism, tiller control, gaskets etc.). I saw one video where they put the throttle handle on backward.

@BrianMDIY Жыл бұрын

I just stopped by to read the comments about filling the lower end with oil from the top vent hole...

@jacobhicks7612 Жыл бұрын

You can bust the seals forcing air in the gear case your in the wrong hole as well...

@ff-mu6cc Жыл бұрын

cool!

@MasterDieselMarine Жыл бұрын

Hey guys I just subscribed! Love your videos… I have a 9.8 foot Bris with a 6hp and love it, but with my wife on board it will not plane out. Sometimes I bring our 2 dogs with us when running out to shore. Was thinking about getting either the 12hp or 18hp? Will the 12 be enough or should I just get the 18? Let me know!! Thanks, Carter

@HufflerGarage Жыл бұрын

That's the same situation we were in. Since the 9.8 FT BRIS has a HP limit of 10, I would go with the 12. We've been able to plane with the 12 on the 10 FT red dinghy with around 700 lb. total people and gear. Hope that helps. Thanks for watching!

@larryalexander4833 Ай бұрын

Did it come with title to register it ??

@pedrodelaluna4326 15 күн бұрын

Is it still working?

@coney207 Жыл бұрын

"Pew" lol 😂

@chrissaunders5375 Жыл бұрын

Haw do I get the air mixer screw out of my 6hp 2strok if the head has shared off ????

@HufflerGarage Жыл бұрын

You could try using a bolt extractor kit to remove it or take it to a machine shop and have them remove it. If all else fails you can get a replacement carburetor on Amazon for about $70: amzn.to/3XdSd28 Or eBay for $60: tinyurl.com/39vw8f68

@kennyjones4739 Жыл бұрын

Just curious, but now that you have owned it for a little bit. What's your thoughts on it? Maintenace, reliability, and performance? Thanks

@HufflerGarage Жыл бұрын

The only issues I've had so far is the latch that holds the cowl on doesn't hold to well in rough water (for now a small piece of tape over the end of the latch is "fixing" it, and the spring that holds the motor up when you pull it out of the water doesn't want to catch every time (It may just need to be adjusted, but it hasn't annoyed me enough to make time to take a look at it). So far, knock on wood, no mechanical issues, it runs like a top. Performance is good. I upgraded my 11 FT inflatable dinghy from a 6HP to this 18HP and its a night and day difference. I've had it out on the ocean with about 800 lbs. worth of people, fuel, and gear and it was able to stay on plane and easily run around 20 MPH.

@jbreefer148 2 жыл бұрын

I decided to get the 12hp model.

@HufflerGarage 2 жыл бұрын

Also a good choice. Our 12 finally came in today: kzfaq.infoTAQjh-H3RsI

@spencermccormick299 4 ай бұрын

Have you used it in the cold any? Needing a new motor for my duck boat

@huynguyentvvnenglish2724 2 ай бұрын

What is that thing call that you put In the water below pipe

@rafa7703 Ай бұрын

Outboard motor muffs

@ransessmartiatu6049 7 ай бұрын

Amigo donde puedo comprar piezas de repuesto para estos motores cuando las nesesite

@jhonmunoz4875 Жыл бұрын

Hola te quiero preguntar estos motores vienen con el aceite o toca comprarlo aparte y que referencia es

@alexcruz7719 7 ай бұрын

Lo saco de la caja. Viene con el aceite y la bombita pa ponerlo, lo cual el hizo incorrectamente a traves del orificio de drenaje superior en vez del inferior pero quedo aclarado aqui por otros.

@zulgadams5837 2 жыл бұрын

LMFAO!!!! filling the lower unit!

@paulthompson1216 6 ай бұрын

Does this unit have an alternator in it that could charge a small 12 volt battery?

@a23b23 8 күн бұрын

Nah

@4realtactics294 2 жыл бұрын

I’m having trouble keeping it running while in idle. Any thought?

@HufflerGarage 2 жыл бұрын

I would make sure the carburetor is adjusted to factory spec. I know the adjustment on the 6.0 idle screw is 1 1/4 turns out, but I'll have to do some research to figure out the adjustments on the 18. These motors seem to come out of adjustment easily.

@batangsalak Жыл бұрын

Me too..but after some proper break in period according to the manual, mine begin to behave the way it should..this engine may be cheap but it is not a crap

@johnjones-uz4pi Жыл бұрын

Hi. Any idea what the difference is between the 15hp and 18hp. Carb jet size maybe?

@HufflerGarage Жыл бұрын

I didn't realize they even made a 15hp. I found a listing on aliexpress that has a comparison of the 15 and 18 and it says the 15 (and 9.9) is 246cc and the 18 is 294cc, but Hangkai's website has the 18 listed at 246cc and doesn't have any specs for the 15.

@ct1762 9 ай бұрын

for the tohastus, the 15 was 250cc and the 18 was 300 so completely different block.

@xrpsharingan828 Жыл бұрын

Hi can this outboard be installed wit steering wheel kit?

@elvador3042 Жыл бұрын

Yes

@HufflerGarage Жыл бұрын

Yes. It has the holes pre-drilled for a steering wheel. You'll need a Yamaha kit for the throttle and gear shift.

@MrBlackbamboo Жыл бұрын

🤭oil pressure FIRST pull start I can't fault these Hangkai engines I love my 6hp

@jeeplife2035 Жыл бұрын

I have an aluminum 12’ boat with a Mercury 9.9 hp. Would this Hangkai 18hp work good for my boat?

@clovm9810 3 ай бұрын

Same question

@jeeplife2035 3 ай бұрын

@@clovm9810 it’s not a good motor. Slow, breaks easy, hardly anyone will work on them. Save your money buy a Mercury 20hp. One of the newer models not the old used one. Don’t waste your money on Hangkai

@clovm9810 3 ай бұрын

Did you buy one to know ? Every video I've seen is very happy people lol 😅

@jeeplife2035 3 ай бұрын

@@clovm9810 a friend of mine did. For a while it worked good but the 18hp they sell is more like a 12hp. It’s not that powerful of a motor. So when I saved up and bought my Mercury 20 I was talking to one of their technicians and he also bought one. Now he works on boat motors and he told me they are cheaply made, hard to get parts for them, and they don’t last long. Now I know how expensive new motors are. I paid 3600 bucks for a 2023 Mercury 20 but it was worth it. Powerful motor, runs great and parts are readily available to fix them if something should break. Add a jacking plate to your boat and you’ll have a fine motor.

@thecahngcut0244 2 жыл бұрын

is the power like Yamaha 15pk.

@HufflerGarage 2 жыл бұрын

I don't have experience with the Yamaha, but this Hangkai has very nice power!

@MikeG4936 Жыл бұрын

is the 18 hp really 2x the weight of the 12 hp?

@HufflerGarage Жыл бұрын

It's close to it. We usually have to use 2 people to safely move it if we don't have an outboard dolly handy.

@variableknife4702 Жыл бұрын

Are these even legal to use in the US / emissions?

@zhengong2101 Жыл бұрын

no law on those

@toddr5732 Жыл бұрын

Did it last long with use all summer ?

@HufflerGarage Жыл бұрын

Yeah it still runs great. I just rode it 76 miles in saltwater this past weekend with no issues.

@spencermccormick299 4 ай бұрын

@@HufflerGarage Have you used it in the cold at all? Needing a new motor for my duck boat.

@SouthTxCarDetailing 2 жыл бұрын

What year is that boat engine

@HufflerGarage 2 жыл бұрын

It's a 2022 model.

@terencepericles6629 Жыл бұрын

What is the shaft length?

@HufflerGarage Жыл бұрын

40 cm (16 in.)

@cawfeedawg 4 ай бұрын

Next time pump the gear lube oil from the bottom port until it comes out of the top one.

@troychambliss784 Ай бұрын

You dont even take it on the lake! How fast? Cost?

@benjineeringtoday8233 2 жыл бұрын

How much does that engine weigh?

@HufflerGarage 2 жыл бұрын

It weighs about 50 kg/110 lbs.

@THe9-3MAnIaC Жыл бұрын

@@HufflerGarage I think that it weighs about 36 kg not 50 kg, the Yamaha 15 hp 2 stroke which this engine is based on weighs 36 kg

@thehappyhooker5146 Жыл бұрын

you pump from the bottom not the top screw. that is how you blow a seal

@joaquinsantillan6257 3 ай бұрын

I ACTUALLY RAN MINE WITHOUT ADING GEAR LUBE TODAY THE INSTRUCTIONS DIDN'T SAY ANYTHING ABOUT ADDING GEAR OIL HOPEFULLY I DIDN'T MESS ANYTHING UP.😢

@thomasmcdonnell2629 Жыл бұрын

next time fill your lower unit from the bottom and have the top screw out , when it's full it just comes out the top. Good video still

@orlandoduran7740 Жыл бұрын

you fill a lower unit from the bottom until it comes out from the top hole

@Jevinrude_dude158 29 күн бұрын

Don’t listen to this guy because you don’t fill the gear lube from the top and you have to do a break in period when the engines brand new and don’t rev it up all the way when you haven’t done the break yet.