No video
Decorative glass sign processes
Рет қаралды 12,506
Күн бұрынIn this video I make a decorative glass sign using multiple reverse glass processes
PLEASE NOTE: The contents of this video are for reference purposes only and we do not accept any responsibility or liability for any related activities undertaken by you or any third party which result in damage or personal injury. If you wish to undertake any of the activities shown in this video, please take appropriate care and seek assistance where necessary from trained professionals.
Link to Armour Etch safetyu guidance: drive.google.c...
You can now support the channel with a small one off donation here: www.buymeacoff...
For hundreds of fully customizable vintage designs, check out Kittl: kittl.pxf.io/Q...
Happy Gilder Patreon: www.patreon.co...
For design templates, full artworks and vector patterns, please check out my Etsy store:
www.etsy.com/u...
Happy Gilder Facebook group: / 885469372033249
Videos referenced:
Glass prep: • Apply gold leaf to a m...
Acid etching: • Reverse glass process....
Water marbling: • Reverse Glass Techniqu...
Gilding: • How to apply gold leaf...
Affiliate links to products used in this video:
US. Mica flakes: www.ashevillem...
US. Etching cream: amzn.to/38OFSyg
US. Gold Leaf
US. Mahl Stick: amzn.to/3FoQnUK
US. Signwriting Brushes: merriartist.co...
US. One Shot Enamels: merriartist.co...
US. Gilders Tip: amzn.to/3blet5i
US. Gilders cushion: amzn.to/3feG2hI
US. Pierre D’Argent glass cleaner: pierre-dargent...
US. Self adhesive vinyl roll: amzn.to/3smMjiO
US. Vinyl application tape: amzn.to/3MZO3Gm
UK. Mica flakes: www.mikewye.co...
UK Armour Etch: amzn.to/3MnVAOy
UK. Gold Leaf: www.stonehouse...
UK. Mahl Stick: amzn.to/3kQfdDO
UK. Signwriting Brushes: www.stonehouse...
UK. One Shot Enamel: www.goldleafsu...
UK. Gilders Tip: amzn.to/3w6dg9B
UK. Gilders cushion: amzn.to/3eExJwt
UK. Pierre D’Argent glass cleaner: amzn.to/38b6qtj
UK. Self adhesive vinyl roll: amzn.to/2RQHUoV
UK. Vinyl application tape: amzn.to/3hmJuJH
UK. Chipping glue: amzn.to/3xNtJ38
To see more videos like; 'Decorative glass sign', please subscribe to my channel and click the bell to be informed of new video releases
Music: www.bensound.com
@barry7608 3 ай бұрын
Thanks very talented, my only criticism is better close ups, surely a talented lady could do that? Take care and it looks nice.
@lexdemonica Жыл бұрын
Your channel has been added to my skills that must be preserved folder. Absolutely outstanding.
@happygilder Жыл бұрын
Thanks very much!! 😀
@seariousjones 2 жыл бұрын
Thank you for being REAL!! Mistakes ARE how we all learn! RESPECT!
@happygilder 2 жыл бұрын
Thank you!! 😄
@kingrat5564 2 жыл бұрын
Another great video!!! You have no idea how much help you are to my journey with this art form. Not the easiest endeavor I must say doing it all self taught and learning from my mistakes as I go. Your content is invaluable to me! Thanks dude🙏
@happygilder 2 жыл бұрын
Thanks man, really glad you're finding the videos helpful! Learning from mistakes is how I learned, and you only make them once ;)
@kadircanozguler8594 11 ай бұрын
First of all that really really good work but we dont use same measurement units can you explain what is the parts?
@happygilder 10 ай бұрын
I use metric measurements, so you can use an online convertor to fine the volumes for what you need
@peacechannel1317 2 жыл бұрын
Good work Paul, not sure if you have heard about UV glue (Loctite UV349) its the same process only you have to apply a drop on glass and it is like transparent. and stuck two pieces of glass very nicely, and no need to trim the edge of glue just clean extra with tissue paper.
@happygilder 2 жыл бұрын
Thanks for the tip, I'll check it out! :D
@Swisshots 2 жыл бұрын
nice to discover new techniques ! Thank you to make mistakes for everybody !
@happygilder 2 жыл бұрын
Thanks!! Glad you enjoyed it :D
@chiparooo 2 жыл бұрын
The finished piece really looks good! Another interesting technique. Thanks for sharing!
@happygilder 2 жыл бұрын
Cheers Chip!!
@Bryzcarter1234 2 жыл бұрын
Excellent Video Paul, thanks for showing these techniques, The punties look good too!
@happygilder 2 жыл бұрын
Cheers Brian, glad you enjoyed it!!
@airbrushken5339 2 жыл бұрын
Love it Paul ... Thanks mate ;)
@happygilder 2 жыл бұрын
Cheers Ken!!
@scotthendricks79 2 жыл бұрын
I fuse using light cure all the time next time try to paint on with a brush, press on clean excess carefully off then cure from opposite side of the glass. I use Mr resin, it's awesome stuff
@happygilder 2 жыл бұрын
Cheers Scott, I’ll check it out!!
@IKSRTFO Жыл бұрын
Love your channel thank you for your content and tips! I have a question, when u mixed the Armour Etch AND Water how long did u wait to add the Mica. On the video it just said "Hours later" but it didnt say how many hours.
@happygilder Жыл бұрын
Sorry the 'hours later' part was my attempt at a joke because it takes me ages to do basic math. You add it all together at the same time so no need to wait :D
@IKSRTFO Жыл бұрын
@@happygilder oh ok 😆 thanks! 👍
@DavidSnir 2 жыл бұрын
Greetings from Canada! I love your videos and have been a subscriber for a few months and just started trying my hand at the techniques you show! I have a question for you: How long do you wait for the enamel paint to dry before you start peeling out the vinyl mask?
@happygilder 2 жыл бұрын
Thanks David, glad you're enjoying the vids! I start peeling as soon as possible. The wetter the enamel, the better :)
@DavidSnir 2 жыл бұрын
@@happygilder thank you sir! I’ll do that!
@modelmania825 2 жыл бұрын
got my chipping glue and some other bits in today , lets experiment some :-) great inspiration
@happygilder 2 жыл бұрын
That’s awesome! Let me know how it goes :D
@modelmania825 2 жыл бұрын
@@happygilder will do :-)
@kingrat5564 2 жыл бұрын
Just joined your patron!
@happygilder 2 жыл бұрын
Thanks man, I really appreciate it!! 🙏
@richardbush4698 8 ай бұрын
Hi in your opinion is there enough of a market that I could do this for a living.
@CaptRich-bi3gp 2 жыл бұрын
Cool Beans Paul! 👍 Would that be mica like you'd find in potting soil? BTW I'm gilding my first piece this evening. 🤞
@happygilder 2 жыл бұрын
Good luck with it man!!! 😀 I’m not sure about the mica question I’m afraid :(
@staatsrat3823 2 жыл бұрын
Paul, i don't know if you ever heard of: do you detect the "tin side" of the glass? With float glass the colour sticks better to the non tin side.
@happygilder 2 жыл бұрын
Hi, I’ve never heard that before but I’ll look in to it! Thanks!
@scotthendricks79 2 жыл бұрын
Use a uv light, it helps to figure out what side to mirror I've been told but didn't notice anything
@modelmania825 2 жыл бұрын
the gold sizing gelatine , is that the same sort as used for food ???
@happygilder 2 жыл бұрын
It certainly is :)
@modelmania825 2 жыл бұрын
@@happygilder thanks :-)
@cliffnelson1174 Жыл бұрын
Why are they called punties?
@happygilder Жыл бұрын
I’m not sure 🤔
@biggiethecat4896 2 жыл бұрын
I really want to try this stuff out. I live in a two bedroom apartment though. My spare room is empty. You think that would be enough room? I obviously can't use a sand blaster though which kind of sucks.
@happygilder 2 жыл бұрын
For this particular piece you need hardly any room and it can all be done in any room of the house. You can get small sand blasters and as long as you got a hydrovane or screw air compressor, it wouldn’t make much noise
@biggiethecat4896 2 жыл бұрын
@@happygilder ok I'll have to look into that then. That would be awesome
@scotthendricks79 2 жыл бұрын
You shake like I do, like the muffler on a old Buick
@happygilder 2 жыл бұрын
😂
Фани Хани
Рет қаралды 2,1 МЛН
Danny Cooke Freelance Filmmaker
Рет қаралды 23 М.