Harbor Freight Union Electronic Safe

No video

Harbor Freight Union Electronic Safe - How to set code

Рет қаралды 232,319

WyrTap

Күн бұрын

Пікірлер: 120

@crabtrap 5 жыл бұрын

IF YOU EVER LOSE KEYS/CODE!!! you can stick a long stick/metal rod in the anchor holes on back of safe. use smallflashlight in one hole to locate that reset button, while using rod to push button. push and hold button till you here beep beep beep. then reset code

@TunedVXR 3 жыл бұрын

No way that's actually really good idea man

@antoniocampea3308 3 жыл бұрын

You just helped me thank you LOL

@ricardoberrocal3358 8 күн бұрын

Thanks for teaching how to open the case, you saved my day.

@user-ff1bb7rh9q 5 ай бұрын

Just bought one in 2023 and I love it so far and I’ve been telling a lot of people about it and it is such a good product

@bdub3871 3 жыл бұрын

Thank you sir. I can see I wasn’t the only one who over looked the damn “entry code button”. 😬😆

@persephonepyre 2 жыл бұрын

THANK YOU! This was given to me and I had no manual! Awesome video! Very helpful!!

@_noah143_4 11 ай бұрын

Thank you!!! Been trying to figure this out for awhile and never knew there was a button inside for the rest😂

@umarhaque516 4 жыл бұрын

Thank you!!!! I did read the manual but my eyes and brain didnt see the Entry Code Button ON the INSIDE. Your video saved the day for me was using the ket for a bit instead

@benjaminpugh1385 3 жыл бұрын

Same here! Thank you for the video

@Taniacath1 5 жыл бұрын

In my hotel room there are bad instructions how to reset passeword. I was going crazy until i found that video! thank you thank you thank you!!

@Moist_yet_Crispy Жыл бұрын

Never got the manual but this helped me reset my safe code. Thanks!!!

@VirgilRhodes Жыл бұрын

Entry button was so elusive. Thanks for the how to find an entry button unicorn vid. Very helpful!

@sukhpreetsingh5742 4 жыл бұрын

I read it properly for more than 30 mins ,but didnt find the red button, thanks for video man

@catherinebrown8934 Жыл бұрын

Thank you! The directions still hold true in 2023

@noanyobiseniss7462 3 жыл бұрын

Lost my key and gave up after 2 days of looking and noticed it was on my keyring a week later. :D

@amberinthebox4462 5 жыл бұрын

Omg thank u. U helped me find the damn entry code button

@Duffle777 4 жыл бұрын

Amber in the box same😂 thx

@mttexg2120 4 жыл бұрын

Yeah, I got this and it doesn't say anything about an "Entry Code Button"

@JUHEBLA1776 2 ай бұрын

Thanks I really didn’t need the help but I wanted to set it so bc I’m making a video of shooting it and wanted to see if the key or the code will still work

@Dimomult Ай бұрын

Well, does it still work ? What did you shoot it with and how many times?

@Dimomult Ай бұрын

Also, this is hands down the best comment on this video.

@JUHEBLA1776 Ай бұрын

@@Dimomult kzfaq.info/get/bejne/mdpjkrZmp8epYok.htmlsi=vbFGOEfKksXYO17B

@397coney7 3 жыл бұрын

This was driving me crazy. I read the instructions and did everything correctly, but I couldn’t get the code to work. Tried resetting twenty five times and no luck. I finally figured out that you have to follow the code with either A or B. Nowhere in the instructions does it say enter code AND the A or B. All it says is; 1) Enter entry code(master or user). Safe will beep twice and green light will illuminate. 2) Turn knob clockwise and open door.

@autodidacticartisan Жыл бұрын

Make sure u use good batteries. I was struggling for half an hour and almost returned it because it would beep but not stay lit up. I almost returned it but I put in fresh batteries and it worked fine

@TheDeeharper5 5 жыл бұрын

Thanks didn't know about button in safe😀

@80DeuceAdventures 3 жыл бұрын

Thanks man. Lost the manual and forgot about the 00 buttons prior to pushing the button. Saved my ass!

@kperkins1982 4 жыл бұрын

Thank you so freaking much I just assumed the thing was defective.

@AngelaShawWestoven 4 жыл бұрын

Worked like a charm. Thank you.

@patriotgrandma7970 4 жыл бұрын

Thanks! Worked perfectly 😁

@katwin659 8 ай бұрын

Thank you! Works on 62978.

@ZURIROBLES-bx8qo 5 ай бұрын

Worked perfectly thank you 🎉🎉🎉

@KimCarsonNOW Жыл бұрын

THANK YOU SO MUCH! They should be paying you big bucks

@ShaunMurphyBand Күн бұрын

Thank you!!!!

@jonatanmartinez2376 5 ай бұрын

Thanks Bro, for your video 😊. Good job

@koopadudegaming6932 3 жыл бұрын

What’s the difference between the Master Code and a User Code? Doesn’t seem that I need the master code to reset a new user code.

@JamesEid 2 жыл бұрын

Exactly.

@Dimomult Ай бұрын

Sorry for being so blunt. Jokes go over my head a lot, but has anyone figued out the diff. between user and master codes? Or is there no difference?

@koopadudegaming6932 Ай бұрын

@@Dimomult I would still like to know this myself.

@Rollincoal17 6 ай бұрын

thanx really helped

@tattedlife984 4 жыл бұрын

Thanks buddy helped a lot

@lgaliego 4 жыл бұрын

Thank you so much for your help...

@detroitdizzle5513 Жыл бұрын

You saved me! Thank you!

@arielldavis6389 4 жыл бұрын

Thank God for men!!

@javierdelatorre8744 3 жыл бұрын

Thank you so much now I can work my safe now

@erikp1170 2 жыл бұрын

Two thumbs up, you saved me! I bought the 1.51 cubic foot safe, and the directions said nothing about hitting 00 in advance, nor did the directions say anything about "pressing" an extra button A or B. The way they were written it it appears two things will happen, A or B... the code will have been accepted or not. But it doesn't say to press A or B. Very poorly written directions.

@samson2143 5 жыл бұрын

Thanks I forgot how to reset after batts died !

@peyton7563 3 жыл бұрын

thanks! helped a lot!!

@Matt-pl9cd 3 жыл бұрын

Just found one of these at the salvage yard opened it in 5 mins with a screwdriver and hammer knock key pad off and push the electric cylinder down put a key lock in it works for a piggy bank

@Tino.__. 3 жыл бұрын

Thank you it worked I have an older model

@videosenutube 3 жыл бұрын

Very helpful,thank you.

@jeffbrinley5443 5 ай бұрын

Thank you!

@tray8162 3 жыл бұрын

Thanks man

@nhutquang665 2 жыл бұрын

Thank you really help

@robertomarquez4820 2 жыл бұрын

Awesome video.

@user-lb4qo7xq1p 4 ай бұрын

How do u set a Code on the keypad on the 0.17 Cube Feet

@constanceopokuboateng5505 3 жыл бұрын

Thank you 😊

@shelbypauley3926 3 жыл бұрын

Thanks dude

@carlossalgado9627 8 ай бұрын

Thanks🎉

@TunedVXR 3 жыл бұрын

Nice one man helped a lot but how is the easiest way to break into a safe ? I heard that if you drop it on the corner and twist the knob itll make the return spring open the lock I haven't tried it lol

@wyrtap5138 3 жыл бұрын

scissors work on some

@domonicmeucci750 3 жыл бұрын

@@wyrtap5138 hey bud not sure if you will see this but if it's possible I could really use alittle help. I have a larger union gun safe from harbor freight it has the key pad and a round key then a turning knob and then the handle you use to open. I got into safe and then when I went to shut it my key is stuck in the safe turned to open position and the turning knob seems jammed I try my code to get in and only the yellow light beeps 3 times but will not open safe I desperately need to get into this safe very soon if you any ideas at all I would so appreciate it

@iamgway 4 жыл бұрын

Video was very helpful. My only question is where the key go ??

@wyrtap5138 4 жыл бұрын

did you find it? i think it is behind a plastic cover.

@garywatersjr8959 3 жыл бұрын

Behind the plastic cover between the keypad and dial unlock thing. @ _ 123 | | 456 | | 789 |_| A0B @=unlock dial []=Lock cover

@Big19dropemback 2 жыл бұрын

Thank you so much

@oSnapMillerTime Жыл бұрын

Omg thanks

@FernandoGarcia-ms2qh 3 жыл бұрын

Thanks bro

@aleemrahim6846 4 жыл бұрын

Difference between master and user code?

@wyrtap5138 3 жыл бұрын

Master code allows you to make user codes and change current code.

@JamesEid 2 жыл бұрын

@@wyrtap5138 It does not. I defy you to Show an example of that or explain it.

@steven.h0629 5 жыл бұрын

A was programmed 12345678 and then the very last opening was also A.. but only 1234.. does this mean A has two codes programmed?

@wyrtap5138 5 жыл бұрын

Steven Hartney this safe does have some quarks but it's very possible that I paused the recording and set the code back to 1234A. I think you can set a mastercode with A and a user code with A as well.

@scottkrueger8556 2 жыл бұрын

Boom i was just saying and he said look it wont work and entered 12e456789 not 123456

@scottkrueger8556 2 жыл бұрын

Nvm read it wrong

@LinetteCorderoAlvarez 3 жыл бұрын

Thanks

@patrickdonovan909 3 жыл бұрын

Thank you sir

@jh5881 8 ай бұрын

Thank you ...i read manual poorly 😂

@ishmaelsampedro7020 Ай бұрын

What type of batteries did you use???

@wyrtap5138 Ай бұрын

@@ishmaelsampedro7020 harbor freight brand AA

@user-zy2wm1fc6q Жыл бұрын

Thank you 😅

@termiterasin Жыл бұрын

Awesome thanks

@jjhjimenez7678 Жыл бұрын

Thanks 🙏

@Bluegmail 3 жыл бұрын

I could set the master code but I cannot change it, any help please?

@briwabriii_bri7096 4 жыл бұрын

Omgggg ok I have one frickin question how do you remove the keyhole cover!!😡

@rob9mm638 4 жыл бұрын

Screw driver

@andrewday497 5 ай бұрын

It never said there's a button inside!!

@LotsConnection 4 жыл бұрын

I'm trying to reset my code. The thing ain't beeping or light coming on when I press entry code. I tried pressing 00 and then hold entry code too, still nothing.. You have any clues how else I can try to reset code or reset the whole thing?

@flightsimulatorace 4 жыл бұрын

Batteries are very sensitive. They have to be at the right angle. Just got a safe tonight, and had to adjust the batteries a bit to get power.

@TNexpert 3 жыл бұрын

Hi I found an empty safe I'd like to use (in a house I moved in) but how can I reset the code? I'm looking for the original 🔑 Safe is anchored to the cupboard compartment no access to the back or anything

@wyrtap5138 3 жыл бұрын

You can try a small pair of scissors in the lock. Open them up and use 1 blade. Careful not to cut yourself put it will work. Push the blade in, pull up and turn

@TNexpert 3 жыл бұрын

@@wyrtap5138 ok thanks will try

@wyrtap5138 3 жыл бұрын

Actually someone else made a comment today about knocking the keypad out. That gives an alternative.

@jdurnal 3 жыл бұрын

what kind of batteries does it take?

@meyersa305 4 жыл бұрын

Why would you have a Master Code and a User Code ?

@davidddlv 4 жыл бұрын

Douglas Meyer makes sense for a hotel

@ZeusBSJ 2 жыл бұрын

Did exactly how you did it and my safe don't work

@ThreeSixtyD 4 жыл бұрын

Is there a way to delete codes?

@adriancerda4461 Жыл бұрын

Mine Doesnt lock

@rayhagan4354 3 жыл бұрын

this is great but only works if it has good batteries....what happens when batteries are dead and you have no key ????

@wyrtap5138 3 жыл бұрын

Pop off the key lock cover and try a pair of scissors. With the right pair you can get the lock to turn

@wyrtap5138 3 жыл бұрын

Be careful though and you might be able to use something other than scissors.

@suetaylor1127 2 жыл бұрын

directions say press and hold entry key code button. STEWPUD

@guyanesegamer1693 Жыл бұрын

This is way too hard to set I will end up using the key

@mikehoward8201 4 жыл бұрын

Lo say Chow, yeah, man, your batteries are dead! Use the key to open and change out batteries!

@babydoll3243 3 жыл бұрын

No need to be rude. I read the manual haha

@Cardinalfloors 8 ай бұрын

Can you mute the sounds

@Dimomult Ай бұрын

You can de solder the speaker from the pcb, or motherboard if you know how to use a soldering iron.

@LorenKyleDiedrich 2 жыл бұрын

My safe won't work with new batteries, only with the cheap ones it came with. Wtf?

@wyrtap5138 2 жыл бұрын

Now that is a new one for me.

@JacobNegRay 2 жыл бұрын

We didn't have the manual lol

@ElNegroHigh 3 жыл бұрын

That safe no is electronic is analog

@allisonmullins8343 3 жыл бұрын

Sam have you moved out npw

@wyrtap5138 3 жыл бұрын

not sure who sam is.

@Angelaxo77 Жыл бұрын

Thank you!

@koolbeez9509 2 жыл бұрын

Thanks