Hardest Job Ever On A Land Rover: Re-trimming The Headliner

Рет қаралды 1,831

2 ай бұрын

Re-trimming the headlining of my Land Rover Defender 110 was by far the most difficult job I've done on this vehicle to date! Not for the faint hearted.
5 Best Upgrades For your Defender under £100:
• 5 BEST Land Rover Defe...
Coastal Cushion Co Headliner retrim video:
• Land Rover Defender, f...
The headliner clips:
www.lrparts.net/lrc1050-light...
Here are some useful links to things I use in this video and in general. They are affiliate links which means I earn a small commission if you use the link but it adds no extra cost to you. Happy shopping:
Lanoguard underbody protection for your Land Rover:
snwbl.io/lanoguard/DALE48975
Dodo Mat Sound Deadening:
amzn.to/3wFIpGU
Trim tools:
amzn.to/4dAlVYx
Sound Deadening Installation roller:
amzn.to/44Gpokk
Tacwise Stapler:
amzn.to/3Qde8FW
Deadblow Hammer:
amzn.to/3Uajkf5
Impact Driver:
amzn.to/4aPcO4G
Exmoor Trim Re Trim Kit:
www.exmoortrim.co.uk/two-seat...
Exmoor Trim Defeater Mat System:
www.exmoortrim.co.uk/interior...
Music: Epidemic Sound
www.epidemicsound.com/referra...
Things I have in my Defender at all times
www.amazon.co.uk/shop/dalereu...
Books for Land Rover Lovers
www.amazon.co.uk/shop/dalereu...
Things I use for Filming these videos
www.amazon.co.uk/shop/dalereu...
Tools I find Helpful
www.amazon.co.uk/shop/dalereu...
#diy #landroverlife #landroverdefender110

Пікірлер: 25

@badamasii Күн бұрын

I was laughing..knew you were going to complain throughout. Thank you for guiding me, planning to get my defender soon

@HeliRy 6 күн бұрын

Looks really good man! Hand prints and all lol 👌

@jamwok3121 2 ай бұрын

Did mine recently. Easiest way to get the clips out is to pull them enough to be able to cut them off, you’ll most likely need to replace them anyway. My headliner was also damp so painted it with PVA. I then got a trimmer to fit and use a material without a foam backing, the type used by VW in their t4 vans, not exactly factory but near enough and looks good. I Propped the headliner with some timber trimmed the fir tree clips and bobs your uncle all back in in 20 minutes (only a 90) Hardest job was getting the rear view mirror to clip back on. Well done anyway👍👍

@DaleReubin 2 ай бұрын

That’s really good mate! I wish I knew the PVA trick, I would’ve definitely done that. I might even redo mine with that t4van material in the future. lol 😂 I know what you mean about getting the rear view mirror back in. Mines still out.

@PaulMcGuinness 2 ай бұрын

If you think that's bad... try changing the side-panel windows in a Series 2/3...

@DaleReubin 2 ай бұрын

Oh dear... I haven't ventured there yet.

@markgb 2 ай бұрын

You made a slight mistake that will make them go soggy again (not your problem if selling on) , once dry, paint them with emulsion this waterproofs them. the fabric sticks well to the dried emulsion. You should have used 4 way stretch camper wall carpet, it's a doddle getting in to fit the contours. (I see you learned this by the end) :)

@DaleReubin 2 ай бұрын

That’s a really good point! I might do it again in the future and rectify those mistakes! I think a darker 4 way stretch material would be better! Thanks for the pointers mate.

@davybrown1329 2 ай бұрын

Turned out great - but I’m dreading doing mine now.

@DaleReubin 2 ай бұрын

Haha, sorry mate, I don’t mean to discourage you but there are some great and very knowledgeable comments on here which I’m learning from too. I might even redo mine.

@jonlloyd1985 2 ай бұрын

I one had to remove the headliner from a discovery 2 to replace the key fob sensor. Had to remove half the car to get it out!

@DaleReubin 2 ай бұрын

Haha that sounds horrendous. I’d love to do a disco 2 build some day!!

@WeAreMemories 2 ай бұрын

The Qualified Captain 👌

@DaleReubin 2 ай бұрын

Haha 😜

Ай бұрын

I've removed mine few years ago, and every few months i'm thinking about fixing it and refitting in my 110. But after watching this video i think I have more interesting things to do :) As for condensation, have you checked seal above front window? Also front corners of the roof above that window? Those spots are not so obvious as safari windows for the water ingress. Great job btw.

@DaleReubin Ай бұрын

Yeah it’s a pain :) Thanks for the comment. The things you mention are next on the list. I’ll go through the water ingress manual and check all the known points.

@braddonald7854 2 ай бұрын

Nice pal, looks great. Quite a task though.

@DaleReubin 2 ай бұрын

Thanks Brad, so awesome that you watched. It was a heck of a job dude. One which I’ll probably have to redo in the future 😅

@ShaneRielly 2 ай бұрын

Nice one, Dale!

@DaleReubin 2 ай бұрын

Thanks bro. I took all your suggestions, I hope it paid off.

@ScoutTheDefender 2 ай бұрын

Had planned to give this a go too with a black alcantara type material - now having second thoughts 😅

@DaleReubin 2 ай бұрын

I think go for it mate. Someone commented that I should’ve used 4 way stretch material and I couldn’t agree more. I think I just used the wrong stuff 🙄 hopefully you’ll have more luck with it!