HB Racing E819 to E819RS Conversion!
Рет қаралды 3,386
3 жыл бұрынIn this video I convert my HB Racing E819 Buggy to the E819RS!
Parts required:
HB-204146 - HB RACING Screw type shock pin set
HB-204377 HB RACING Caster Block Set V4 (17.5 degree)
HB-204458 HB RACING D819 1-pc Swaybar Link
HB-204456 HB RACING D819 Swaybar Pivot Ball v2 set
HB-204457 HB RACING D819 Rear 38mm Stroke Shock Shaft (+5mm)
HB-204476 HB RACING Arm Mount 2-dot (B/+0.7mm)
HB-204562 HB RACING D8 Series Servo Saver Tube
HB-204566 HB RACING D819RS Rear Shock Tower - V3
HB-204567 HB RACING D8 Series Steering Block Set - 2 degree
HB-204568 HB RACING D8 Series Steering Block Bushing Set
HB-204569 HB RACING D819RS Servo Saver Spring - Hard
HB-204570 HB RACING Long Shock Rod End v2
HB-204577 HB RACING E819RS HD Front Chassis Brace
HB-204595 HB RACING D819RS Clamping Servo Saver Nut V2
@DoRC 2 жыл бұрын
Anodizing dye actually soaks into pores in the aluminum that are created during the analyzing process. Anodizing does not change the dimensions of the part. If the nut would not thread on it was machined incorrectly.
@g.bjumpsbashing3062 3 жыл бұрын
Mann...perfect vid bro...good job Kip it up mate👑👑
@KITLEYJA 3 жыл бұрын
Thanks bro, appreciate it! Thanks for watching
@DoRC 2 жыл бұрын
Thicker coils will make the spring stiffer but more coils will actually make it softer.
@ninjaxgaminggamingchannel3082 3 жыл бұрын
Do you think you could help me with my mt 1 ? Having trouble starting
ISSEI / いっせい
Рет қаралды 64 МЛН
David Ronnefalk
Рет қаралды 17 М.
YS Football Lover
Рет қаралды 2,9 МЛН
Alash Pride TV
Рет қаралды 831 М.
HFC MMA
Рет қаралды 1,2 МЛН