Thank you for your video on the Nurge products. I got them and love them!

Hi Karen. I found your video when I was searching for reviews on Nurge stands. Thank you for the detailed review; it was very helpful. I have purchased the small Nurge model. Have subscribed and am now slowly enjoying other videos on your channel as I stitch. Best regards, Veena

Thanks! So much good info! Now to decide which one I’ll get first! Happy stitching to you!

Thank you for this very informative video. I’ve researched several stands and I’m sold on Nurge!

Best video I have seen on this topic! I had no idea what to buy until I watched this!!

Hi Karen l have bought the bigger table stand one ,they look great ,Thankyou so much for doing this demo .🥰

Thanks for the demo. I bought the nurge floor stand after you recommended them in a live video. Somehow I hadn't been able to figure out how to make it shorter to use as a table top stand. After watching you I realised that my daughter had just turned the knobs so tight when she assembled it for me that I was assuming they were fixed in position! Brilliantly versatile now.

I'm sold. Your video is just what I needed to cement my decision to buy the Nurge lap stand. Thank you for making this informative video.

Thank you! I ordered a floor stand and I love it!!

Thanks so much for showing your Nurge frame...it will work for the natural slippage of our neck as we age❣️

I bought both. You sold me. Thank you so much. I received the sit on stand today. I love it. This is my first stand. I have to wait for the floor stand to be sent. Thank you for the tube and great information.

What a lovely, informative video. You are a wonderful lady, thank you

I live in Canada and ordered and received my Nurge lap stand in less than two weeks. I am so thrilled over the quality of workmanship and how it works in my recliner. I could not have asked for anything better. I also thank you for the excellent presentation in your video of this product. Look forward to more informative information in future videos.

I just love you! You made me smile when you mentioned needing them all 😅🥰💛 that’s me too lol!

Got this because of you nice review. Thanks

Thank you for a very informative video. The floor stand is for me

This was such a helpful video, thank you.

I have the sit on stand and LOVE it SO much!!!!!! Going to buy the Nurge hoops also that have the tightening screws♥️

Thank you very much for the demo !

Thankyou very much for doing this demo Karen ,l am looking around for one that hasn’t a lot a delivery charge to Australia.🥰

Love the video,im a hoop user,so going to check out this stand. Have you ever tried the Q snaps before and if you have,what didn't you like about them or liked about them. Dont want to try them if they're not as good as my hoops,lol. I will take your word for it. And would you still prefer your hoop for large projects like full coverage and HAED patterns etc. Here I am with all these questions again...I promise I'm going to run out of questions. Your the 1st person I've found im comfortable with to ask my questions. I don't know a single person that cross stitches so cant ask them. Ive stitched for 40 years but just getting back into it and all this new technology and techniques....very exciting

I purchased this seat stand based on this review. It is everything she said it is and I am very happy with it. I also bought the Nurge embroidery hoops as well as I have to say that they are the best. I will not go back to round hoops ever. These hoops hold the work taught and keeps it that way.

Just got mine today and was confused about how to put the hoop in. Thanks for clarifying.

Karen. Thank you very much for the explanation. I made my decision . Thank you

Thank you for sharing ❤️❤️❤️

Thank for review.I bought it from Amazon Grazie 🙏🏼

Thank you for your video. I am wondering if you are still as pleased with the stand after using it for a year and what size nurge hoop do you prefer for cross stitch on this stand?

Thank you for sharing Is there anything for rectangular hoops? Or rectangular stand like a table meaning for a big space for big project?

Good video I will purchase this

Thankyou just brought the floor one and wondered if I did the correct purchase, great I did!🌈Just one thing you cant swing the embroidery frame over to end your threads how do you do it please??

Subscribed!

Really informative demo. Thank you. Do you know if you can use stretcher bars with this stand?

I ordered the Nurge stand and 6” hoop from Amazon. I did not see the smaller stand, but the larger stand was $94 with free shipping. I don’t think you need to be a prime member to get that deal. I can’t wait to try it. I have been using the Rolaframe products, but can’t find a stand. I’m wondering if your Lowery stand would hold the scrolls. Thanks for the info.

Question. Does it hold tightly while using pressure? Or does it need adjusting often?

Hi Karen ,l have received my nurge floor stand ,does your hoop has some play in it that moves just a little from side to side ,l just thought it wouldn’t move .

Hi Karen , I love the new loop start you showed on the last episode. It also works when using 2 threads which is even easier than the pin stitch.. Now to my question about the Nurge seat stand. Is it possible to change out the head to put the holder for a quantum frame or q-snap on it?

love the video.....How wide is the opening...My needlepoint frame is 3/4 inch thick. Will it fit? thanks

Thanks so much! I am curious to know what do you do with the extra fabric hanging off the hoop while you’re stitching.

Hi! First of all thanks for sharing your experience with both Nurge stands. Do you mind sharing the links where you have bought them?

i love how you explain this stand. i was looking to buy it and was looking for revieuws. this helped me so much. i only have 1 question, does the stand work with the plastic nurge square frames?

Hi Karen Love, love, love your videos. Could you use the table stand as a sit on? !!

Will the Nurge stands hold a roller frame rather than a hoop?

Hi Karen ,if you could only afford one which one would you choose ? I think the floor stand ?

Oh the table stand is wonderful.. how much is that one.? Are you selling your other stands?

How do you get to the back of your piece when using this stand?

Does that bottom knob bother the inside of your leg?

Do I have to buy their hoops or can I use my own?

Hi. In my previous comment I meant to say I have a problem in keeping my fabric tight in a QSNAP (not scroll frame)

I bought one from amazon Australia,the larger one and a 7 inch hoop all up $127.00 Australia,and free delivery ,l am one happy person ,as l need my shoulder replaced ,which l am not going to do ,and l have been using a q snap which is really hurting my shoulder and arthritic hand ,so this is going to be much more comfortable for me ,this is why l love utube and lovely people that are willing to share if only my brain could count stitches and not lose my place ,l have only ever done one crossstitch but l am slowly getting the hang of it ,and l just have to do complicated full patterns don’t l ,oh well that’s life .🥰

CraftyImaginations :)

Hi Karen. Thanks for this video. I never heard of this brand. I am currently working on my first HAED (storykeep so it’s small) and am using qsnaps. I never thought of using an embroidery hoop to cross stitch. But I am fairly new so have a lot to learn. Would you recommend using an embroidery hoop to cross stitch? Is there any cons in using a hoop versus qsnaps or even scroll frames? I find that I can’t really get my fabric tight in a scroll frame. It keeps on loosening up Thank you and looking forward to your reply as I am thinking of purchasing the hoops and maybe even a stand.

Is the sit on stand for any size

Found the right person

Can you flip your work over to get to the back of your work?

Did you get it on Amazon or Etsy??

Can you use plastic hoops

Where can you buy this

Can you turn the hoop to work on the underside to secure threads?

I have arthritis in my fingers this should help

But it limits the size of your project. You can only use itty bitty hoops.

Karen, Can I assume that the clamp is also too small for a scroll bar?

Thank you! Best review I found. I'm ordering right now! 🪡💗👍