Helping Out My Sister - Ford Explorer Flex Pipe

Рет қаралды 198,197

10 ай бұрын

In this video I help out my sister by replacing the broken flex pipe on her Explorer instead of buying the really expensive pipe right from Ford. It's just one way to do it.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 1 000

@tonypitsacota2513 10 ай бұрын

Grandpa always said "Look directly into the spark and never blink for a proper weld". :)

@JHruby 10 ай бұрын

Thank you for not rewarding Ford's ridiculous parts prices.

@gvari28 10 ай бұрын

I may not be a welder, but " we're not sending this to the moon" cracked me up. Always feels good to help familymembers. Keep up the good work..And I hope you have happy birthday 🎉 which is something we share 😊

@jeepinspence 10 ай бұрын

In best Taryl Dactyl voice" This ain't the Space shuttle we're just mowing grass!"

@madmaxinthunderdome 10 ай бұрын

He's not stacking dimes he stacking buggers 😂

@sasquatchrosefarts 10 ай бұрын

If you look up when there is a daytime crescent moon, it never coincides with the orientation of the sun, and earth, and "earth shadow" on the moon......nobody is going to the moon. Because the moon doesn't exist. It's just a luminary, or reflection.

@GregFeeney392 10 ай бұрын

You're a good man, Eric, for helping your sister.

@brucejones2354 10 ай бұрын

Eric seems to me a good man no matter who he is helping.

@donlemme898 10 ай бұрын

Your family and friends are fortunate to have you. I’m not a mechanic but my daughters think I am. I do my best to keep wheels under them. Poor kids will be in for a rude awakening if/when I can no longer do so. Big fan of Diablo blades too. Have a great week.

@Steve0885 10 ай бұрын

Kissing butt is always good 😅

@SempreGumby 10 ай бұрын

guessing a bunch of sisters and Eric is the only brother?

@mikeholubek4419 10 ай бұрын

She either beat the crap out of him growing up or covered for him alot

@clintprice2123 10 ай бұрын

Eric is a devoted brother, he also does a quality repair!

@8avexp 10 ай бұрын

He's also a devoted family man.

@WhiteBuffalo59 10 ай бұрын

$90n an hour is a very reasonable rate for a mechanic of your caliber.

@jimh.412 10 ай бұрын

Yep I'm surprised he doesn't charge more. I live in a small town in Minnesota and a kid who just graduated from automotive school charges like $105/hr with 2 years of experience. 🤷

@s.j.5850 10 ай бұрын

It's a bargain for the quality of work Eric does!

@itseasiertotakeitsomewhere738 10 ай бұрын

Shush your mouth.

@crisprtalk6963 10 ай бұрын

@@jimh.412 in older vids he stated he was 65$. 90 is still too cheap for other parts of the country, but consider his location too and 90 might be just about right.Dunno. Worth every penny though that is for sure.

@innercityprepper 10 ай бұрын

yeah I wouldn't call it reasonable, I'd call it a steal. Every shop in my metro area is at least 120/hr, some as high as 160.

@acwright 10 ай бұрын

Should have upsold her an undercoating while you were there 😅 Just in time for salt season

@lijoima 10 ай бұрын

I can't believe how some people the the N/E have cars with such bare dry underbodies!

@riverflyswatter 10 ай бұрын

@@lijoimashe got another brother that can fix it .

@Dirtyharry70585 10 ай бұрын

Going through car washes helps a ton to limit the salt monster. 90k on my ‘19 F150 and still looks good down under, from Ohio winters.

@larryharry7221 10 ай бұрын

Fluid film to the rescue

@dougyoung3896 10 ай бұрын

@Dirtyharry70585 I have been thinking they either don't have underbody flush car washes or the state of NY it's illegal to wash your car 😂 ! I live in a way worse salt area in Upper michigan where we have salt on the roads for 6 months and our cars don't look like there's !

@carolb9422 10 ай бұрын

Once again, thanks for the cost discussion at the end. Really adds a lot to the video.

@Hey_Its_That_Guy 10 ай бұрын

You're a good brother, Mr. O. You did your sister a solid. She owes you some cookies or ice cream (or both)!

@RJ_Taylor 10 ай бұрын

Thanks to Eric, I've taken to yelling, "Hey, it's that guy!", whenever somebody honks. My wife doesn't get it.

@Hooterzutoob 10 ай бұрын

@RJ_Taylor That's funny, I do the same thing.

@bigdaddymak1439 10 ай бұрын

You had Eric at ice cream! 😂😂

@musclesmouse 10 ай бұрын

steak

@phatbuddha1 10 ай бұрын

She buys him a case. A case of BraKleen!

@N-wordScissorhands 10 ай бұрын

This is one of the few channels I try to watch every new video. Truly one of the top 3 if not the best mechanic on youtube. Glad I’m early today looking forward to Thursday already 😂

@chuckgrenci6404 10 ай бұрын

Thumbs up for your comment, and I'll add; the best mechanic on KZfaq.

@JimsPub-ds3qs 10 ай бұрын

Ditto! @@chuckgrenci6404

@jimh.412 10 ай бұрын

Yep Eric and I'm a Ford guy so I like Ford Tech Mulkalocco (sp???) Videos.

@georgegogis7958 10 ай бұрын

definitely the best mechanic i have seen on youtube or anywhere for that matter !!!

@s.j.5850 10 ай бұрын

The best tech on KZfaq hands down!

@waynebake1123 10 ай бұрын

As a master internet welder with over 50 years of experience, compliments on your work.

@tedcook8749 10 ай бұрын

He done “fried it on there!”

@TNitroH 8 ай бұрын

Eric should say "I get paid to fix cars not rebuild them"

@sdwputnam 10 ай бұрын

Morning, your still a great repair guy in my book. If you weren't so damn far away, this 70 yo would not be afraid to drop off his vehicle for repairs. Oh, please wear ear protection also. As someone who has working with steel for 40 years and used hammer and grinders on it, believe me when after time, one starts saying ( WHAT) more. Keep up the good repairs.

@miketeeveedub5779 10 ай бұрын

As a guy in his mid 50s with tinnitus it makes me cringe every time he uses a power tool without ear protection. Eric will learn the hard way in the coming years as he says "What?" when the grand kids try to talk with him.

@blautens 10 ай бұрын

Hearing protection - yes, this. The man is a treasure and hearing is precious. I'm 55 and thinking about all the things I should have done to protect my hearing.

@ellesmerewildwood4858 10 ай бұрын

GOOOOOOOOOOOO FORD !!! 600 bucks for a little flexi pipe ! YEESH ! I'm sure she'll offer to pay for the job, but also I'm pretty sure you wouldn't take it anyway. So she'll reward you instead by spreading the word that she has the best brother in the world, and THAT is priceless.

@WilliamMulligan 10 ай бұрын

I didn't realise how effective safety squints can be!

@walterburns8489 10 ай бұрын

I've been watching your videos for years. I think that's the first time I've ever heard the train.

@johnhickman1534 10 ай бұрын

Watching you move your LED light around made me think of the old bulb in a basket, one drop gotta stop, trouple light. I would spend time trying to find a place to hang it, and then it would rotate away from the work. They would also brand you if you got your arm against it. Sometimes new is improved. Love your videos.

@s.j.5850 10 ай бұрын

The '"good" old days. It's amazing we could see with those old things compared to LED lights.

@rustynails68 10 ай бұрын

My dad never trusted me with anything but holding the light. I couldn’t do that right either. They were ridiculously bad. Dim as a candle and hot as a soldering iron. The bulb would blow each time you bumped it on something. When the bright flashlights came out, I got my dad one. He never used it. He likes to suffer.

@garrettfruzynski 10 ай бұрын

@rustynails68, same here! Took my dad a bit to accept a magnetic LED light but he’s still making fun of me for wearing a headlamp 😅

@timd1833 10 ай бұрын

What a great brother! Occasionally, my sister took care of me when I was a baby to help my Mom out. She's 84 y/o now and in assisted living. Starting to become 'forgetful'. 😒

@robinsonsauto 10 ай бұрын

Such a great brother! Always great watching the master at work

@acwright 10 ай бұрын

I follow you too

@terencehawkes3933 Ай бұрын

I am always amazed how you come up with such good repairs when dealing with the horrors of corrosion. PS. Your welding skills are fabulous.

@kennethbode2017 10 ай бұрын

1 hr makes one happy sister

@vespamorelli7090 10 ай бұрын

Good man Eric for helping your sister. You’re father would be very proud of you ❤

@mejesse809 10 ай бұрын

Is poppy gone, MeMaw

@timcritz3194 10 ай бұрын

Around me the average shop labor rate is 150 an hour and its a crap shoot whether they know what they are doing. 90 an hour is amazingly affordable especially considering the high quality of service you provide.

@rustynails68 10 ай бұрын

I thing $90 is pretty low. I would also pay a premium for someone with a reputation for knowing what they are doing.

@braddokken9191 10 ай бұрын

150 is low end around here. The shop I go to charges 175 but they do know what they are doing. Dealers are north of 200. I can't remember when rates were under 100. Guess it all depends on where you are.

@NathanSmith-ut4ur 10 ай бұрын

I was also blown away when I heard $90 an hour. I looked at houses in the area surrounding SMA and you can get a 4 bedroom house for $150k. That’s wild in itself. Seems the area is still a decade behind

@timcritz3194 10 ай бұрын

@@braddokken9191 are you related to Don Dokken ? I am a big fan of the band DOKKEN , saw them 4 times in their prime.

@efil4kizum 9 ай бұрын

@@braddokken9191 my local Yota dealer shop is currently 160$ in NE

@AbcDef-iq4no 10 ай бұрын

When you were grinding down the pipe cut and had the film speed up I was instantly reminded of some of my favorite scenes from the 60s Bewitched TV show where Samantha would speed things up.

@DIYDaveOK 10 ай бұрын

Always awesome to be able to help family. That's why I love doing my son's and daughter's oil changes and brakes; besides, they come over to visit 🙂

@robertdriscoll9673 10 ай бұрын

As usual Mr O it doesn't matter who your customers are you treat them like family. Just as you have done for your sister.

@rodgermalle3321 10 ай бұрын

Great job Eric ! I wish you lived close to us so we could take advantage of your knowledge and skills. The industry needs more people like yourself.

@djsi38t 10 ай бұрын

I have been to many garages that would flat out refuse to repair anything and just say you need all new pipe.When i found a guy who would do a quick wel patch for 50 bucks...I was so grateful,you don't even know.This was many years ago on a 78 monte carlo so yeah.Bless those men like yourself who are willing to repair instead of replace the whole damn thing..

@fredsalter1915 10 ай бұрын

I love the sound of a freight train passing, blowing its noble sounding horn. Very nostalgic. Avoca is the bomb!

@BrianB14471 10 ай бұрын

I'm wondering where that train was going. Bath & Hammondsport was bought by L A & L RR several years ago. The line was torn up from Dansville to Wayland 35 years ago. There must be something in Cohocton.

@danhnguyen-fn9eb 10 ай бұрын

Nice! Flex pipe certainly has changed over the years. Back in the day it was nothing more than super thin metal in about 1/2'' segments and you cut the pipe to length. That stuff was only good for a few high engine revs or one trip around the block before you blew it out. You did your Sis a solid. I hope she repaid you by treating you to an ice cream cone. 😋

@paulb8186 10 ай бұрын

Still the same but under a wire mesh

@mattmanyam 10 ай бұрын

You can get them in inconel, but good luck getting someone to weld it! 😁

@riceburner4747 10 ай бұрын

You're a good brother. My brother would leave me hanging. I'm sure she counts her blessings. 👍

@brandonsimunac 10 ай бұрын

Eric is a rust belt wizard. I’d be game for a Torch Tuesday episode - just an hour of Eric and Vic fixing the world one blast at a time. Damn fine television.

@RJon2006 10 ай бұрын

I’m just here for the professional welders and their comments.

@simentalg 10 ай бұрын

Those welds look pretty good, am not a welder but I do have 46 years experience welding and I was born in 1980 😁

@PoptartFps 10 ай бұрын

Same thing I was thinking. Guy is sand bagging

@nicholasr7987 10 ай бұрын

Confucius says.."A man who can weld, has a wrist tan"

@jeffc3676 10 ай бұрын

I'm confused... 🤔

@brucejones2354 10 ай бұрын

@@jeffc3676, in order to clear up your confusion, take your shirt off then do some welding for about 4 to 5 minutes...........you will then understand ! ! !

@picklerix6162 10 ай бұрын

I believe Eric gets a lot of comments from the armchair welding experts. His welding is top notch for an exhaust system.

@lvsqcsl 10 ай бұрын

I am wanting to say your brother Scott owns a tire store and your brother Douglas owns a repair shop as well, so, I would be willing to bet they jump in there from time to time. As you pointed out, working on cars owned by the family is "government" work. GREAT VIDEO!

@ajfurnari2448 10 ай бұрын

Took me a few seconds on getting the "Government" work joke

@williegillie5712 10 ай бұрын

Every time the kids make plans now days they always say, ”I’m down with that”. Clutch that’s a new one for me. I must be behind on my teenager lingo. At any rate your a good man Eric taking care of your sisters exhaust leak.

@MikhailSkulls 10 ай бұрын

I just did front and rear pads, rotors and air filter, cabin filter and an oil change on my sisters car. Watched your encore brake video to see what i was getting myself into Lol All went smooth and she was happy.

@nicholasr7987 10 ай бұрын

When I moved to FL about a decade ago....the installers I would work with didn't have torches or even know how to flare brake lines! Coming from up north, these are the first skills you learn.

@germanjesus 10 ай бұрын

The fact that ford didn’t recall all of the explorers after everyone passed out from Exhaust gasses is a freaking miracle

@stu6885 10 ай бұрын

Quality is job none @ FoMoCo

@brucejones2354 10 ай бұрын

@@stu6885, unfortunately that seems to be true.

@bradhaines3142 10 ай бұрын

@@Martys-4x4i dont like ford but if youre right thats definitely not recall level of mistake

@robertbritton9674 9 ай бұрын

Nobody can recall anything with 200k miles in the rust belt. Maybe GM can recall all those rusted out frames.😊

@tomtke7351 10 ай бұрын

what most realize but don't acknowledge is that videos like yours are 2nd place to OJT. Hands-on training is powerful... watching all the various repairs on KZfaq is too. It's entertaining but more so is training. Thx Mr/Mrs O!❤

@jonmack5359 10 ай бұрын

you sound like rainman ray 'i'm not a professional welder'... but then do a fine job welding! lucky sister you have, family strong

@timskiff9422 10 ай бұрын

He can weld everything from the crack of dawn to a broken heart.

@jefftepper1305 10 ай бұрын

Eric: From one brother to another, taking care of your little sister is part of the jpb of being a big brother. Regards, Jeff

@efil4kizum 9 ай бұрын

@@Martys-4x4 could be twins?

@j.davidwilliamson1163 9 ай бұрын

Eric, you sure fooled me when you said you were not a welder. That weave bead you used was the giveaway. Great work.

@colinfield97 10 ай бұрын

I understand your pain Eric. Like you, I know I am not getting paid when my sisters rock up with their motoring problems. Fantastic videos that keep me sane though. Greetings from Scotland for you and Mrs O

@hotflashfoto 10 ай бұрын

Great info, sir! This tells me that I might be able to buy a welder and replace 2 flex pipes under my V6 FWD. One is only 3 or 4 inches long, the other is about 8 inches. Now I just need a hoist! And a garage . . . .

@masseymm 10 ай бұрын

appreciate the material and labour explanation at the end

@markjones3121 10 ай бұрын

Good that he's now adding approx costs. Useful info for many punters who have no choice but to go to a shop. Usual excellent video

@letmein2460 10 ай бұрын

I live in Southern California and my FORD dealer changes $195.00 per hour so your $90 per hour is an absolute steal! Eric, as always I really enjoy watching you and seeing how you make everything seem so easy.

@gregscott9170 10 ай бұрын

Love the way you are always trying to save your customers money and still do a high quality job. 👍

@yhird 10 ай бұрын

Well done Eric. The welding looks great.

@AntonioClaudioMichael 10 ай бұрын

Easy peasy Repair Eric O glad ya got your sister back on the road with a Quiet Exhaust again 13:12 @South Main Auto Repair LLC

@TNitroH 8 ай бұрын

My fusion flex pipe lasted 15 years (07-22). Mostly garaged and low mileage vehicle. Local muffler shop did it for $145. You are a good brother

@wallingj68 10 ай бұрын

He must hold no ill will towards his sister, as he didn't leave any undetectable perforations in the weld "by accident". "It's so weird Eric, whenever I drive the Explorer I get so relaxed and just want to take a nap ever since you fixed it." :-D

@sspnugen 10 ай бұрын

Looks like a great welder to me, enjoy these flex pipe videos

@EM-df6mo 9 ай бұрын

What a nice brother. Hope she knows how lucky she is Bro.

@davidrobins4025 10 ай бұрын

IMHO you did a great job fixing the problem. Your sister should be very happy.

@petem6291 10 ай бұрын

Eric you do nice work. I bought a flex head torch for my mig and it’s a game changer, I start as high as I can on the pipe form and oval pattern ( with the puddle ) between the old pipe and the new pipe and don’t stop till you get to the bottom. I find I get a leak free joint when everything is done correctly.

@vikingtraveler2655 10 ай бұрын

Love your channel. You're a good man sir and amazing mechanic.

@Wrang15 10 ай бұрын

That's how I weld up my firewood handling equipment and snow blower. If it breaks, just add more. It does not have to look good, just work.

@mxaexm 10 ай бұрын

Educational and entertaining at the same time! Hopefully you will get to the well deserved 1 million subscribers soon!!!!

@mrjsv4935 10 ай бұрын

Well done helping your sister :) Have helped my sister too whenever necessary.

@markbulva4188 3 ай бұрын

You’re a great brother Mr. O!! And your customers have no idea how lucky they are to pay only $90/hr for a AAA mechanic.

@williammouri1096 10 ай бұрын

Your rates are super reasonable. I hope the local community appreciates you guys. You give a lot of bang for the buck! That repair will outlive the rest of the vehicle.

@tedbiernacki376 10 ай бұрын

Nice professional job Eric ! Even hit it with some high temp paint! 😊 Surprised that you haven't undercoated your sisters car !?

@cycleguy666 10 ай бұрын

Well your sister will be pleased!! Amazing what ford gets for the flex and pipe!! Seems like parts go up weekly!! 😊

@mrb1864 10 ай бұрын

That front pipe looks solid enough see out the replacement flexi . Job jobbed & real money saved .

@davidgrimes4726 10 ай бұрын

Love the no-look, bare handed welding 🤣

@tracydiller9378 10 ай бұрын

Great video Eric and yes you are a good brother for helping your sister out.Those welds looked good.

@bw6078 10 ай бұрын

Very straight cutting. When the sparks from welding were hitting your arm I expected a few ouchies. You must have leather for skin LOL. Those darn factory flexies don't last the life of the vehicle and should be made to be replaced more easily.

@stantilton2191 10 ай бұрын

Big brother to the rescue. A quality repair that'll last a long time.

@johnchaulker3241 Ай бұрын

1st time commenting on a KZfaq video , watch your stuff all the time , really helped me out with a evap leak on my old chevy silverado , thanks from Canada

@bearing_aficionado 10 ай бұрын

As the official bearing aficionado of this channel, I am going to love this video as I also own a 2018 Ford Explorer!

@bertblue9683 10 ай бұрын

It's best to leave your mouth shut and have us assume you're a fool than to open it and give us no doubt

@bertblue9683 10 ай бұрын

In the words of Clark Griswold, it's nothing to be proud of son

@bearing_aficionado 10 ай бұрын

@bertblue9683 so why don't heed to your own advice?

@midnightrunner684 10 ай бұрын

The state puts that salt down that rotts the cars out ,They should have a program to reimburse some of the fees to repair your cars

@kevinhammer4370 10 ай бұрын

A lot of good moments in the one. “But we’re still brothers”. Hell yea Eric !

@Hank-ski 10 ай бұрын

Grinder and paint make you the welder you ain't. 😉 Thanks for the video. You keep me coming back!

@kenj.8897 10 ай бұрын

It's hard being the go to guy .Working for homemade cookies .

@secretsquirrel6124 10 ай бұрын

Nobody wants to pay the family mechanic 😂

@Doing_it_right_the_first_time 10 ай бұрын

@@secretsquirrel6124 Me being the “family mechanic“ I’m happy to work for homemade chocolate chip cookies and / or banana walnut bread warmed up with a little butter on top! :-) Tall glass of cold milk to go with either of them :-)

@secretsquirrel6124 10 ай бұрын

@@Doing_it_right_the_first_time we all will work for food it's one of the things why us men do the things we do

@perryzimmap3639 10 ай бұрын

Hi Mate would it be a good idea to have a pipe bender to bend a MIG tip to suit welding top side of exhaust pipes as you are repairing them all the time. Just a thought. Cheers mate.

@dougheywood4692 10 ай бұрын

You are a good man Mr O helping out your sister.

@PanamaSticks 10 ай бұрын

It just so happens that my mechanic did this exact job for me yesterday afternoon, on my 2001 Camry, also with a NAPA flex section. $195. I was disappointed to see him take out a torch to get the old pipe out, supposedly to remove some clamp bolts. I know as a machinist that the heat reduces the corrosion resistance of the flex and adjoining pipes. And in fact, he told me I'd be lucky to get 2 years service out of the new flex. My mechanic does.very good work, so I trust him.

@miceinoz1181 10 ай бұрын

Do not put your welding skills down Eric, I have seen plenty of your welds in the past, and they are better than most. You want to see poor welding, gotta see Ray's. He really does need some lessons. That crackling sound of the mig tells me the machine is set up well for the job too.

@marksmallman4572 10 ай бұрын

yup, Ray needs to practice..

@dustyroads834 10 ай бұрын

You were able to weld that exhaust pipe without burning a hole through it. Lol. I spend most of my welding time trying to fill the holes I made.

@trotva 10 ай бұрын

I used many of those Diablo blades thru my work in Urban Search & Rescue and fire department extraction work. Those blades were great. We abused them beyond normal use, in places most people would not believe. They never let us down. Highly recommended ......

@Killawife 10 ай бұрын

I think its really good that you are so frank with the costs of the various repairs and parts. I reply to a lot of posts on various forums where people ask about their bills and if they are being scammed and its very common for someone to get a price suggestion of $1700 for a regular brake job and similar and lots of folks just don't know what the things actually cost.

@mikerobbins5049 10 ай бұрын

Well, we already knew you were a great Auto Tech, husband and father. Now we know you are a great brother too. Good job Eric O.

@haywardsautomotive6156 10 ай бұрын

Nothing like helping out family & friends! Always makes you feel good seeing the smile on their face!

@paulcochran1721 10 ай бұрын

It always gets you in the feels when you can help your sister. Also, - Train goes by blowing it's horn - "Hey! It's that guy!"

@Vincent_Sullivan 10 ай бұрын

After watching hundreds of SMA videos and never hearing a train horn I had come to the conclusion the tracks through Avoca were abandoned. Glad to find out I was wrong!

@paulcochran1721 10 ай бұрын

@@Vincent_Sullivan Our local tracks are down to a one way spur now, rarely hear the train horn, so this one stood out for me!

@stevedibiase728 21 күн бұрын

This rreminds me how good factory oem mufflers and pipes are last life of our cars most cases me being 75 remember in my younger much younger lucky get 3-4 years out of a exhaust system. Ask any old timer they will tell you how we had to replace exhausts in the day very regularly.

@MRrwmac 10 ай бұрын

Good brother! She loves you even more now!

@gregsidel3557 7 ай бұрын

Your sister is very fortunate. She has a brother like you, Eric. Good job thank you very much for the video

@mattrimmel9165 10 ай бұрын

I have been told by many many welders everyone is a professional welder when its laying on a flat table perfectly clean and perfect lighting and conditions...

@JoseSilveira-newhandleforYT 10 ай бұрын

Simple way to bypass the original part's cost! Good job Eric!

@daviddamico4288 10 ай бұрын

Nice work Eric, glad you helped your sister out, that’s what family does..

@mattyb7736 10 ай бұрын

"Missed"....."Nailed it" I could so go somewhere with that, but it's a family show. 😂

@G31mR 10 ай бұрын

What works even better than high-temp engine paint is cold galvanizing compound. Spray it on like paint and it actually prevents further rusting. I've been using it for 50 years and it works.

@richard.d5121 10 ай бұрын

This summer i bought my nephews old flox core welder and learning how to weld LOL those welds you just made look beautiful

@jerzcnate 10 ай бұрын

Better man than me Eric helping your Sis like that. My Sis burned me out working on her house 😂

@crforfreedom7407 10 ай бұрын

You left out 'shop supplies'. NEVER leave out the shop supplies!!! 🤣🤣😂😂🤣🤣

@joecook8352 10 ай бұрын

Your a good brother, it feels really good to be in a position to help others especially family, good on you Eric!

@rickconstant6106 10 ай бұрын

Whenever I used to weld overhead, the shower of sparks always found its way down inside my shirt, however carefully I covered up. Glad I'm retired now.