HEMI swap in a Jeep JK Wrangler for CHEAP!!!

  Рет қаралды 10,763

Maddog's Garage

Maddog's Garage

6 ай бұрын

I made this video to show that you can DIY Hemi swap Jeep Wrangler without buying a kit. I did this swap buy buying a whole donor Jeep Grand Cherokee and a few parts from Jeep Speed Shop. After I sold everything off of the Cherokee, I had about $500 in the drive train. $400 for the radiator, $500 in exhaust, $340 in JSS parts, $500 in miscellaneous parts, fluids and gaskets. So somewhere between $2,000 and $2,500 for the entire swap.

Пікірлер: 30
@josh26050
@josh26050 2 ай бұрын
I plan on doing a hemi swap when my Jeep is paid off…I planned on using a Ram but I never thought of a grand Cherokee. That’s a good idea…definitely saving this video
@fadiatieh
@fadiatieh 5 ай бұрын
Thank you for the amazing video, the only missing part is the wiring harness splicing, I'm starting my project as soon as i get the motor mounts from Jeep speed shop. it would be great if you just take the cover off the harness at the place where you joined the two harnesses and do a quick video of which wire is connected to which wire on the other harness.
@jimmytucker7388
@jimmytucker7388 Ай бұрын
I have an 08 jk and I just bought an 06 Cherokee overland to use as a donor.. after watching this video I feel like it’s gonna be a breeze.. thanks for the video
@88HillTop
@88HillTop 25 күн бұрын
Hey man, I really appreciate your explanation and video. My 3.8L head is trashed, but I did a compression test on it and on the bottom left is the Orion “ASD” relay which is the one that needs to be pulled for the compression test. I know its a wild hair to mention. Its just FYI if some needs to do a compression test. And now I'm gonna keep watching you explain, cause I don't know the rest, but after this I will. Thanks again.
@emirisic3311
@emirisic3311 3 ай бұрын
Thank you so much for this. This is exactly what I'm doing.
@hunteralgie746
@hunteralgie746 6 ай бұрын
I like the idea of running it all by splicing it into the single plug. But where did the second plug wires go, just battery?
@fadiatieh
@fadiatieh 5 ай бұрын
Thank you for sharing, I though I need a loan to do the swap, but you gave me a hope. I wish if you do a video on how you did the wiring harness. Do you believe that setup will be the same on a 2 door JK, I mean the transmission has shifted backwards for an inch or two, would that be a problem when it comes to 2 Door jeep? will I need a custom drive shafts? Note: I have a complete 2007 Grand Cherokee to take the parts from.
@joshhowe2712
@joshhowe2712 5 ай бұрын
Love the video! Very helpful. I have a 2010 Jeep JK and a 2005 5.7hemi and 545rfe trans from a Ram 1500 4x4 to put into the JK. I know the JK is can bus ecu. Which year range of truck harness and ecu should i be using if i wanna build my own harness instead of buying a harness? Are all 03-08 ram truck ecus can bus or only 06-08?
@hunteralgie746
@hunteralgie746 6 ай бұрын
Also did you do anything to Cherokee écu ?
@garymoore5642
@garymoore5642 5 ай бұрын
I'm in Oklahoma as well looking to do hemi swap 08 jk how can I contact you
@danamcwhite
@danamcwhite Ай бұрын
How long did it take you to
@hunteralgie746
@hunteralgie746 6 ай бұрын
Subscribed when u heard the idle at start of video. This is awesome! Where are you located? I’m looking into Hemi swapping right now I have a 2008 jeep jku and I’m looking into 03/08 ram 1500 to wire up but now this makes me wonder on the Cherokee harness.
@maddogsgarage-ik1iy
@maddogsgarage-ik1iy 6 ай бұрын
Thanks for the sub. I'm in the Tulsa, OK. area. I'm sure the truck Harness could be done as well, I would just have to take a look at it. To answer your other question, That sub harness I was talking about had connectors C2, C3, C4 (white, orange, and green) that ran on the driver side to the PCM. The other end connected to the engine and had all the transmission harness in it. It didn't go back to the battery side of the Wrangler. Some of the connections literally ran from those PCM connectors through the smaller main connector through the the bigger main connector back to the tipm.
@hunteralgie746
@hunteralgie746 6 ай бұрын
@@maddogsgarage-ik1iysounds good I would like to show you the harness etc how would I contact you?
@malaktrizan9304
@malaktrizan9304 6 ай бұрын
This was exactly the info I was looking for Awesome job !
@hunteralgie746
@hunteralgie746 6 ай бұрын
@@malaktrizan9304 you swapping yoo
@hunteralgie746
@hunteralgie746 6 ай бұрын
@@maddogsgarage-ik1iy also, can you make more videos on it too?
@allensample1093
@allensample1093 13 күн бұрын
Not a clean engine swap! Sorry Brother.
Jeep JKU 6.4 Engine Swap DIY (3.8 out, Hemi in) (Video 1)
18:28
JKU 392 ADVENTURES
Рет қаралды 4,4 М.
Jeep JK 5.7L Hemi Swap
43:56
SEGA MOD Shop
Рет қаралды 27 М.
When You Get Ran Over By A Car...
00:15
Jojo Sim
Рет қаралды 10 МЛН
孩子多的烦恼?#火影忍者 #家庭 #佐助
00:31
火影忍者一家
Рет қаралды 36 МЛН
My Jeep Wrangler DIY Hemi Swap Cost HOW MUCH???
21:36
JK Gear and Gadgets
Рет қаралды 217 М.
This is how I stuffed a 5.9 Cummins into my 2016 Jeep Wrangler!
26:17
Sawyer Garrett
Рет қаралды 2,9 М.
What Are Ball Joint Deletes And How Do You Install Them???
21:35
JK Gear and Gadgets
Рет қаралды 294 М.
Full Build: Swapping A V6 For A Hemi V8 In A Jeep Wrangler JK
1:17:05
POWERNATION 2
Рет қаралды 328 М.
MUST Have Jeep Wrangler/Cherokee 4.0 Upgrades?
17:55
Muddy Beards 4X4
Рет қаралды 224 М.
I Bought 3 Jeep Wranglers for LESS THAN $5500!!! How Bad are They???
30:12
Ultimate Rebuilds
Рет қаралды 360 М.
MoTech's Approach
21:48
WranglerJKLS
Рет қаралды 14 М.