POD GO as in-ear-monitor-mixer headphone amp

No video

POD GO as in-ear-monitor-mixer headphone amp

Рет қаралды 7,115

2 жыл бұрын

Use your Line 6 POD GO for your guitar as well as your in-ear monitor headphone amp, with or without another guitar amp on stage.
Here's a DIAGRAM:
drive.google.c...
One thing I forgot to mention in the video is: remember to CONFIGURE your FX RETURN in the settings of the POD GO. It can be set as a STEREO AUX IN, but if you are using a balanced TRS cable to insert a monitor mix coming from the FOH (front of house sound board), then it should be set as a LINE IN (not stereo aux).

Пікірлер: 47

@MotownGuitarJoe 2 жыл бұрын

Wow... Seems.... Complex, though you did a nice job explaining it. 🙂 My Pod Go set up: 1. No amp on stage, at all 2. Guitar in 3. Left (mono) out goes into mixer/FOH 4. Xvive U4 in transmitter coming out of my monitor out channel. 5. Xvive receiver on my belt with in-ears plugged into it. That's it. 🙂

@henrydueckmusic 2 жыл бұрын

The point of my setup is for those that don’t have or want a separate mixer or wireless system for their in-ears.

@aaronturner4444 2 жыл бұрын

Nice explanation, maybe one of these days I’ll embrace in-ears, not there yet though 🙂

@germanperezbottesi4458 2 жыл бұрын

Thanks so much dude! Great explanation. Now i need to get a inear system for my pod lol.

@profesorvictorayala1855 2 жыл бұрын

gracias buen tema

@passporttonowhere 2 жыл бұрын

Thanks for the video. Regarding your in ear monitors... Are you using a cable directly to your head phones? Or are you using wireless in ear monitors?

@henrydueckmusic 2 жыл бұрын

I'm using a wired extension directly to my in-ears.

@arfrans Жыл бұрын

Neat!

@arfrans Жыл бұрын

I see you have an Ernie Ball cable there, I think. Have you tried the instrument & headphones combo cable from the same manufacturer for this amazing setup you have here?

@evangelannobilbrew7090 5 ай бұрын

Great Vid, does the FX Send send stereo signals or mono?

@henrydueckmusic 5 ай бұрын

You can select either a mono or stereo FX Send. For stereo you would need to use a TRS cable.

@evangelannobilbrew7090 5 ай бұрын

@@henrydueckmusic Ok tnx

@paolobiggini7595 Жыл бұрын

Hi Henry, thanks for the very well done video. Why do you need a DI? The POD Go should have a balanced output.

@henrydueckmusic Жыл бұрын

Because I’m using the FX send to go to the PA. If you use the main outputs to the PA then your in-ear monitor mix would also be sent back to the PA and create a feedback loop.

@paolobiggini7595 Жыл бұрын

@@henrydueckmusic yes, you are right. I see now. Many thanks 👍🏻

@izoobadavid7191 Ай бұрын

Hello, I enjoyed watching your video, Now I don't have an amp, so I am running my outs using the Main Out on the Pod does that affect me in anyway?

@henrydueckmusic Ай бұрын

If you use the main out for the guitar then you can’t use the FX loop for an in-ear mix. It will send the monitor mix out along with the guitar signal.

@izoobadavid7191 Ай бұрын

@@henrydueckmusic Is their a way out?

@henrydueckmusic Ай бұрын

This whole video explains that exact thing. Using the FX Send as your output.

@izoobadavid7191 Ай бұрын

@@henrydueckmusic Thanks Alot it worked. Bless you.

@Robert_Charles 2 жыл бұрын

I love this but my brain needs a diagram lol

@henrydueckmusic 2 жыл бұрын

If you look in the description of my other video (Pod HD 500x as In ear monitor) I have a diagram there that is the same principle as this setup.

@henrydueckmusic 2 жыл бұрын

I made a new diagram for this specific setup: drive.google.com/file/d/1pX7AzRbiWYVqasd-7aWincGYKTBoQHDs/view?usp=sharing

@tristangarel-funk3236 Жыл бұрын

Aren't you losing the stereo by putting effects between the amp and the cab?

@henrydueckmusic Жыл бұрын

Yes, that would sum it to mono. I usually don’t use stereo effects. If you put the stereo effects after the cab, and the effects loop after that, then you can use the FX out in stereo.

@IrvingCNC 2 жыл бұрын

Great video! Why did not you use the main out instead of the fx loop send? Thank you!

@henrydueckmusic 2 жыл бұрын

If you use the main out, then you will be sending both the guitar signal AND your monitor mix back to the PA and create a feedback loop. Using the FX Send allows you to isolate the GUITAR ONLY signal.

@matteoradi 2 жыл бұрын

@@henrydueckmusic you mean that you send the monitor mix signal IF there s a monitor signal that arrives to your POD, right? Maybe @IrvingCNC simply asks why use the FX Loop instead of simply going out from Main Out..

@henrydueckmusic 2 жыл бұрын

@@matteoradi Correct. If you were not using the Pod as your monitor mix headphone Amp (which is the point of this video) then you would simply use the main output.

@DanailDinev 2 жыл бұрын

Thanks a lot for this routing explanation! I have question about FOH (fx send) - is Pod Go sound in stereo when using this method?

@henrydueckmusic 2 жыл бұрын

You could use it in stereo IF you set the FX send to be in stereo, and you use a Stereo Y Cable from the FX send into two DI boxes.

@DanailDinev 2 жыл бұрын

This sounds promising, thank you!

@profesorvictorayala1855 Жыл бұрын

Saludos es obligatorio tener el gabinete antes del FX loops? / Greetings, is it mandatory to have the cab before the FX loops?

@henrydueckmusic Жыл бұрын

For this set up, yes, the FX loop needs to be at the very end. Otherwise your monitor mix with vocals etc, will all go through the cab block, and your guitar signal would go out to the PA without a cab.

@profesorvictorayala1855 Жыл бұрын

@@henrydueckmusic Can I move the cab?

@henrydueckmusic Жыл бұрын

@@profesorvictorayala1855 Yes, select the cab and then press ACTION which "lifts" the cab and lets you move its location in the signal chain, then press ACTION again to drop it into the new spot.

@profesorvictorayala1855 Жыл бұрын

@@henrydueckmusic thanks 😊

@marcvanheugten9472 Жыл бұрын

Do I need to plug in more in the hd or this pod other than headphone and guitar? Can I practice like that?

@henrydueckmusic Жыл бұрын

If you are just practicing with headphones, then all you need is your guitar plugged in and headphones out. This setup I use is for a live performance using headphones to add in a monitor mix with the other instruments.

@davidordonez8964 2 жыл бұрын

I went from the amp out to my fx loop return of my amp, and it didn’t sound nothing , i don’t know why; what could it be?

@henrydueckmusic 2 жыл бұрын

If your amp is like my Blackstar amp, it needs something plugged in to the front input to take it off of “standby”. I just plug a 1/4” adapter into the front input. Give that a try.