Heres why I'm 1UZ swapping my IS300

Рет қаралды 7,103

2 жыл бұрын

Freddy explains why he is 1UZ swapping his Lexus IS300 instead of turbocharging the 2JZGE.
PMM store:
► www.amazon.com/shop/poormanmods
Tools that you NEED
►AWESOME Screw Drivers: amzn.to/2XnZuDv
►Amazing Electric Ratchet! amzn.to/3kb90mm
►POWER PROBE amzn.to/3lqoi6c
►OBD2 scanner amzn.to/2JLRCkE
►Welder: amzn.to/39dbM42
Automotive Products I HIGH recommend
►Turtle Wax Seal n Shine: amzn.to/32AEPtL
►194 LEDs amzn.to/2xXxNBu
► Dash Cam amzn.to/2JTrvIs
► / pmmods
► / poormanmods

Пікірлер: 107

@Revengeance_ 2 жыл бұрын

I've been seeing the 1UZ very slowly but surely gain more traction (after decades) and I would love to see the aftermarket for this engine grow. On paper, it's one of my favorite engines and I'd love to actually work with it. Can't wait to see this finished project

@PoorManMods 2 жыл бұрын

Thank you! I hope the aftermarket grows too

@c33jp 2 жыл бұрын

Quite a common swap into hilux & surf (4runner) down under in Australia & New Zealand. Been done for over 10yrs

@deimosphob 2 ай бұрын

I just want the price of cams and rods to go down

@tinystar3010 2 жыл бұрын

From what I know, the 1UZ is actually one of the top JDM V8 engines available too. And if you started with a car that had a stock 1J/2J, you could sell that engine, and have plenty of cash remaining after the cost of the 1UZ to pretty much fund the swap and a few extra goodies too. Solid choice imo.

@PoorManMods 2 жыл бұрын

Thank you!

@2JZ_WISCO 2 жыл бұрын

i'm glad you're doing something different, im currently looking at options to swap my factory manual is300

@PoorManMods 2 жыл бұрын

Hells yeahhh

@samaccurso 11 ай бұрын

This is why I've kept & absolutely love my 98' gs400, this engine is a gem.

@PoorManMods 11 ай бұрын

Yesss

@davidpritchard6685 2 жыл бұрын

Im from the uk. I have a is200/is300. I swap in a 98 1uz. One of the best engines for this chassis. Very handy swap and i love it. These cars should have come with this engine in them. Love the content keep it up 👍

@PoorManMods 2 жыл бұрын

Thank you!

@MRtucnakCZE 2 жыл бұрын

Reliable and charismatic rumble from 32 valve V8. All props to you.

@PoorManMods 2 жыл бұрын

Thank you!

@jicez6649 2 жыл бұрын

Great video! I just got my 1uz harness back so almost ready to put in my is300 just need the XAT ar5 transmission goodies before putting the car under the knife. Can't wait for your next video to see how you go about with the install

@PoorManMods 2 жыл бұрын

Thanks! I went with a Spitronics ECU and harness, and all the XAT racing goodies for the engine mounts and bell housing conversion.

@jicez6649 2 жыл бұрын

@@PoorManModsawesome, can't wait to see it put together and the spitronics sounds like it leaves the door open for supercharger tuning in the future

@scoobiedude 2 жыл бұрын

My 92 sc averages 23 with mixed driving. And the early 1uz is butter with them beefy rods. Special engine for sure

@KameleonKustoms 2 жыл бұрын

Had a 99 GS400. Loved the engine in that thing! It was just a boat of a car. I was going to 1uz swap my 85 celica gt-s but ended up selling it before doing it. I also had a IS300. I agree it is lacking in the power department. The 1uz should be an awesome swap. I thought about doing it myself and even watched a bunch of videos about when Chip Foose did the uz swapped IS300 but used the 4.3L. Didn't look too bad and sounded ah-mazing!

@PoorManMods 2 жыл бұрын

Yesssds

@KameleonKustoms 2 жыл бұрын

@@PoorManMods also I love the "break the mold" outlook. Main reason I prius swapped my 85 mr2. A hair more power, 100lb less, and totally unique!

@PoorManMods 2 жыл бұрын

@@KameleonKustoms yesss that's amazing!

@HomebrewSubaru 2 жыл бұрын

Love the 1UZ. I wanted to put on into my 240 just couldn’t find something complete at the time. It’s a killer option today because the price for JDM turbo stuff is not as feasible anymore 👍

@PoorManMods 2 жыл бұрын

Yes very trueee

@jordanowens842 Жыл бұрын

I had a is300 before and was hoping someone would do a series on this!!! Sold it a while ago but now have just acquired a is300 wagon and really would love to 1uz swap it please do a in depth series for this!!!!!!!

@PoorManMods Жыл бұрын

thank you! i have released 5 parts now regarding the swap, its very detailed

@hussienabukhalil2012 11 ай бұрын

Thanks alot alot alot again and again for this lovely vedio and for explaining the difference between both engines. I have LS400 96 with 1UZFE Non VVTI, actually the Non vvti is more popular in swap world, I see it in tons of vehicles like BMW , Mercedes , audi and mutch more , even boats and small 4 passengers airplane . It's less HP then VVTI, but more reliable . Thanks again .

@PoorManMods 11 ай бұрын

Thanks!!

@Singleturbo-sk9qp 2 жыл бұрын

Funny thing is my sc400 came with the 1uz vvti and its pretty quick for a street car it has the torque and the sexy v8 noises how my sc300 has the vvti 2j but u can turbo that or add a nonvvti bottom end on it I've seen people run 35psi on a nonvvti jz with no issues

@FlashxSwazy 2 жыл бұрын

Haven't watched in a minute. But damn you should have more subscribers by now

@chicago_beats Жыл бұрын

Nice information

@PoorManMods Жыл бұрын

thanks!

@carlosgarza4089 2 жыл бұрын

I have an 01 is… I been thinking of this swap too. Please go into detail on the swap. Like exactly is the Clearance done on the fire wall, what factory parts will work. An the most important that no one really specifies. What manifolds to use.

@PoorManMods 2 жыл бұрын

I'll do the best I can

@devonteherring662 2 жыл бұрын

You're gonna love it 🤘🏼🤘🏼

@PoorManMods 2 жыл бұрын

I knowwww!!!

@siqsteen 2 жыл бұрын

I'm doing a VH45 swap in my 240, and I feel the same way.

@PoorManMods 2 жыл бұрын

Hells yeah

@Thisiskolby 3 ай бұрын

Im planning to do this in the future on my is300 as well! need a lot of homework on wiring before that though.

@PoorManMods 3 ай бұрын

i covered the wiring pretty much step by step for the Spitronics ECU i ran

@Thisiskolby 3 ай бұрын

@@PoorManMods awesome! You the man I was just watching a few minutes in my lunch break but I’ll check the rest out!☺️

@PoorManMods 3 ай бұрын

@@Thisiskolby :D :D i covered the entire stop pretty much step by step with all the videos i did. Youll have to binge watch them all :p

@AUDITHISWORLD69 2 жыл бұрын

I saw a 1UZ mk3 Supra here in Orlando it’s definitely a sweet sounding motor

@PoorManMods 2 жыл бұрын

Ron from YotaConnectors.com had one with ITBs and it sounds amazing

@AUDITHISWORLD69 2 жыл бұрын

@@PoorManMods are they Florida based? I think it was a white one i saw. Maybe it’s the same one who knows looked like it got really well though

@ilyas5708 2 жыл бұрын

0:47 i want to duratec swap an FB for this exact reason.

@563ramirez 2 жыл бұрын

Dude I love this. I have a 3uz I want to swap into my is 300. Can you brake down what we need to do?

@PoorManMods 2 жыл бұрын

I'll do the best I can

@Ihate_dalen 2 жыл бұрын

So excited

@PoorManMods 2 жыл бұрын

Thank you!

@A_SIMPLE_JOURNEY 2 жыл бұрын

1 us in a 2012 Jeep Grand Cherokee what do you think trynna get a 500-600 hp for daily use

@andresperez8382 Жыл бұрын

I’m also looking to make this swap on my IS300 and find another car to swap in the 2JZ

@PoorManMods Жыл бұрын

sweeeet

@davegt27 2 жыл бұрын

1UZ into an IS300 just makes so much sense

@tavoncoll6266 Жыл бұрын

Hello ppl. I have a friend who has a 1uz from a 98 GS 400. He is interested in dropping it in to his 95 se 300. Is this possible? The 95 currently has 2jz in it. If this is possible is there any modification needed to consider

@dawsonlo6685 2 жыл бұрын

Your a real one pmm !

@PoorManMods 2 жыл бұрын

Of course!

@dawsonlo6685 2 жыл бұрын

@@PoorManMods your channel is truly underrated bro, u make great content keep it up brotha and can’t wait to see the build!

@PoorManMods 2 жыл бұрын

@@dawsonlo6685 thank you so much I really really appreciate it 😁

@450sxkoupe 2 жыл бұрын

In my Nissan s13 coupe I have a Vh45de, I've ridden in a s14 with a 1u and i want one. I want to put the 1u in my 87 supra.

@PoorManMods 2 жыл бұрын

Doooo itttt

@K03sport 2 жыл бұрын

is it lacking simple stuff like intakes and headers; or is it the more complex stuff like throttle bodies and, valve train stuffs, lightened flywheels, bigger injectors, etc.?

@PoorManMods 2 жыл бұрын

I'm not sure what you are asking?

@blownaway4371 2 жыл бұрын

@@PoorManMods I think he's asking about the accessories and such to actually get it running. I wanted to LS my '02, but the dang headers are almost what I paid for the car 😡 What about the bell housing and clutch assembly? Can someone get the parts from the pull-it's?

@K03sport 2 жыл бұрын

@@PoorManMods...in your video, you mention the 1uz engine lacks support. What type of support? There is enough support to do the swap, but as far as adding power, what is available?

@WelcomeToTheMadness 2 жыл бұрын

I don't need two of them because I have enough problems. 😂😂😂😂 While I fully understand this sentiment. I think I would like one that's stock.

@PoorManMods 2 жыл бұрын

😆😆

@NARFALICIOUS 2 жыл бұрын

I'd love to 1UZ swap a Toyota pickup

@PoorManMods 2 жыл бұрын

Do it!

@scottybangbang Жыл бұрын

The 1uz is very reliable and there's some out there that have a million+ miles on them and still running

@PoorManMods Жыл бұрын

Yupp!

@WelcomeToTheMadness 2 жыл бұрын

PS: What transmission are you running with the engine. Oh yeah, and what upgrades are you doing to the engine.

@That_Handle 2 жыл бұрын

☝️ ✏️✏️✏️

@PoorManMods 2 жыл бұрын

I'm using the W55 manual transmission that's currently in the car, not sure how long it'll last LOL if it breaks I'll goto a W58. The only performance upgrades I'm doing are Headers and a standalone ECU, then maybe light weight pulley's at some point

@WelcomeToTheMadness 2 жыл бұрын

@@PoorManMods Wait, but a standalone ECU for a V-8 usually ranges between $1800+ so why the expensive ECU?

@KameleonKustoms 2 жыл бұрын

@@WelcomeToTheMadness only if you go mainstream plug and play. You can have a speeduino or rusefi ecu for around $200. Make a harness and tune to your hearts content.

@overbuiltautomotive1299 2 жыл бұрын

i fell you man never rent if ye can help it i have in the past never again i.seems like a great idea vvti heads and a cam regrind that thing will skoot with a tune adding a bit of ignition timing that 1uz vvti will go .i need an extra 2jz na and transmission want to sell it ? got a 280zx with no engine for my mom so ill be doing something As always be blessed

@PoorManMods 2 жыл бұрын

Easier said than done lol

@c33jp 2 жыл бұрын

I have a rs200 3sge, when the motor goes I’ll probably do a 1uz swap

@PoorManMods Жыл бұрын

Sweeeeet

@ronirome2566 Жыл бұрын

I’m trying to swap a gs300 for a uz

@marioandultrachap 2 жыл бұрын

I'm shocked I literally thought it was heavier because it was a V8 I stand corrected I guess it ain't a bad idea after all.. but I do want more power than 100hp extra lol. Unless you can turbo the 1uz lol

@PoorManMods 2 жыл бұрын

More power and less weight, the car will be almost perfectly balanced and drive amazing

@kobyhelms4609 2 жыл бұрын

What do you think would be a good swap for the es 300

@PoorManMods 2 жыл бұрын

Swapping to a different car if you want performance

@KameleonKustoms 2 жыл бұрын

ES300 is basically a fancy camry. FWD and all. It has the 1mzfe engine. Possible swaps include, but not limited to, 3sgte (I'd suggest a gen5 version if you want easy drop in power), there is a rare 1mzfe supercharger kit, a 2arfe from a modern camry/scion tc would give you similar power but a lot less weight. There are a lot more options, just depends on how deep down the rabbit hole you want to go.

@djdoc36 6 ай бұрын

Are the 3uz the same weight as 1uz?

@PoorManMods 6 ай бұрын

Pretty much the same weight

@junniordfw1 2 жыл бұрын

Turbo time

@donfrancis1375 2 жыл бұрын

People underestimate these 1uz. They always cry out for thick rod versions which are pretty dire. For not much money you can see 600+whp in these bad boys. I love mine stock. Great choice sir aha

@PoorManMods 2 жыл бұрын

Thank you!!

@marioandultrachap 2 жыл бұрын

Really? How so? Are they easy to find if you want that much power?

@donfrancis1375 2 жыл бұрын

@@marioandultrachap really easy to come across dude and gaining traction in the community as more people notice how good they are. Ls400 98+ or even the 3uz from the ls430 are great engines. For boosting cheap you can run around 400 on completely stock engine and fab a boost set up by flipping the manifold forward. Theres a good amount of info about them now tbf man. Not sure if that's what you meant about finding them aha. But yeah the auto box zaps a lot of power. So even a manual swap in an is300/200 depending where you are is a good upgrade. Blocks very light. The is200 had a 1gfe which is pretty small and it's still lighter. Worth reading up on man. Easy to swap in a weekend.

@blownaway4371 2 жыл бұрын

@@donfrancis1375 Please send me some links on the 1uz swaps! Was gonna do the LS 5.3/AR-5 in my '02 IS300. Is there fitment problems with the 1uz headers? That's the main thing with the LS swap. Headers are almost what I paid for the car! ($1800+!!) Thanks 👍

@donfrancis1375 2 жыл бұрын

@@blownaway4371 I'll have a look through after work dude. Yeah the headers need tapping in slightly around the steering rack but that's it really it's literally a couple blows with a hammer. Think theres a couple vids on YT too about an install on is300 dude. It's a great replacement as it keeps the body balanced well too being so light. I think wet it's around 174kg

@moisesbenito3026 2 жыл бұрын

sexual v8 noises 😂

@mr.cangieter8758 2 жыл бұрын

1uz is a heavily underrated engine. Some good headers, a free flowing exhaust, some 12.5:1 pistons, kelford cams, some S65 BMW ITBs, a good aftermarket ECU and you won't need a turbo. Response on tap whenever you need it, good torque and horsepower and best of all no reliability issues and unnecessary heat. kzfaq.info/get/bejne/mdCehdugxKrGf6M.html kzfaq.info/get/bejne/fMx6ipeIvpjVdWg.html

@PoorManMods 2 жыл бұрын

I'll just be doing headers and a standalone ECU for now. All stock internals

@mr.cangieter8758 2 жыл бұрын

@@PoorManMods RS enthalpy would remap stock VG30 ECUs to run RB25s. Maybe they can remap a 3uz ecu to run your 1uz? kzfaq.info/sun/PLH5JJBuYzyrPVeSQAbKmP4LJQnjxVVkot

@907nttf 2 жыл бұрын

You sure you want to do that? Your car is probably worth alot stock factory manual. They have been selling for crazy prices. I would do it to a cheap auto is and convert it.