4 ай бұрын
4 ай бұрын
5 ай бұрын
6 ай бұрын
Пікірлер
@robertclymer6948 Сағат бұрын
Good video and info brother!!! In my research, I hear guys love the fans off the Continental's. Not sure of size and such, but they are highly rates and can be had at the bone yards. Cheers From Motown/Dearborn. Oh also, no worries on the zip ties. If ya ain't riggin, you ain't ridin. lol
@jamesmorgan818 7 сағат бұрын
Excellent Video. Thank you!
@JuanDelgadoCaban Күн бұрын
i’m having problems getting out by the fuel lines I disconnected and no getting out
@genesis-ii Күн бұрын
Great video. Thank you. I just noticed that they changed the design on the lights. Now they all look like the one it reflects backwards. Even the red ones. Does anyone have a link to the red good ones? Old style i guess
@EldomiTransport Күн бұрын
Will you willing to do it again
@PoorManMods Күн бұрын
@@EldomiTransport I probably would not be willing to do the road trip in the near future just because it uses up so much time that I have to take off work But that does not mean I'll never do it again
@lesd2633 Күн бұрын
Way too long. Repeat yourself over and over. 5 minute vid is all that you needed.
@aammdj 2 күн бұрын
LOL. "This is ALL you gotta do". LOL.
@carlosgarza4089 2 күн бұрын
As one of the 4 people who watch. I approve.
@PoorManMods 2 күн бұрын
haha yess! thank you!!
@TheNerf59 3 күн бұрын
This dude single handedly made the best video on how to overhaul the entire rear set up on an is300
@PoorManMods 3 күн бұрын
@@TheNerf59 😎🤟 thank you
@derekstamper362 3 күн бұрын
Thank you
@AndrewDOMINGUEZ 3 күн бұрын
Hello, I bought a Lexus ls400 and want to full rebuild the engine and do have an idea how much it would cost? Also transmission is starting to give out, should I rebuild it or get a whole used one or is it possible to stage 2 an automatic transmission
@PoorManMods 3 күн бұрын
Rebuilding the engine yourself will cost around $1500 for all the parts and hardware, plus the cost of machine work if anything needs machined. As for the transmission, find another, theyre a dime a dozen.
@AndrewDOMINGUEZ 3 күн бұрын
@@PoorManMods thank you for the information
@PoorManMods 3 күн бұрын
@@AndrewDOMINGUEZ youre welcome!
@CarlKahler 4 күн бұрын
That hole is for the tube storage
@DanielTheMagicBum 4 күн бұрын
HOLY SHIT THIS WAS ACTUALLY AT THE TOP OF MY FEED
@PoorManMods 4 күн бұрын
Haha really?? 😁🙌
@paul--b 4 күн бұрын
Didn't think I'd watch the hour, but it was so well edited and interesting that I did.. not even planning any rear end work any time soon 🤣
@PoorManMods 4 күн бұрын
@@paul--b haha yesssss thank you 😁🙌
@michealrobinson 5 күн бұрын
I love this idea! Can't wait to see this all come together.
@PoorManMods 5 күн бұрын
heck yeah thank you! :D
@icetech6 5 күн бұрын
Found this while researching switching my 62 to LED.... this made me decide to stay with normal 1157s... even the reds don't look better than the left side in the video to me. Thanks for posting this.
@ryanjofre 5 күн бұрын
I wonder what the Figs headers sound like cause the HP gains are fukin awesome but they cost $2400 mother f’in dollars!!!!😱😱😱😱
@PoorManMods 5 күн бұрын
Shew, not worth the $ at alllll in my opinion
@ryanjofre 5 күн бұрын
@@PoorManMods 100%!worth it if your rich imo and want a naturally aspirated beast. The gains are awesome for headers but obscenely expensive. Back in 2004 I payed $550 for USA made Doug Thorley headers which is allot but worth it for premium USA made V6 headers for my VG30E V6!engine. That’s 932.71 adjusted for inflation. $2400 is insane. Like what you’d expect from BMW or Ferrari even.😱😂 Figs also makes a full titanium exhaust for like $4 grand../holy fuk! I always dreamed of a full titanium exhaust. I use to be poor then rich and now I’m kinda poor again. The Figs headers and full Ti exhaust would be so sweet but we’d still get smoked by grandmas in Tesla’s😱😂😂.
@ryanjofre 5 күн бұрын
@@PoorManMods The Stage 2 264 cams are 100% worth it with 3 degrees of timing retard on the exhaust cam.👍👍
@nostro1940 5 күн бұрын
Abs doesn't make you break faster. It allows you to use the steering wheel for the crucible seconds the car is breaking
@heyhayhay247 7 күн бұрын
In a year, I'm guessing you won't swap it; you'll like it too much and maybe throw on a set of twins
@PoorManMods 7 күн бұрын
@@heyhayhay247 absolutely not, whether it takes a year or 2 or whatever, it's getting swapped unless someone buys the car from me for a ridiculous price
@dorian8876 8 күн бұрын
cooool !
@PoorManMods 8 күн бұрын
Thanks!
@BIGFESH 8 күн бұрын
you had me at "hog ass cam...." HELL YEA BROTHER those old stangs sound awesome with a big ass cam in it. you need to talk to chad or harry dehoff them boys had some bad stangs back in the day.
@PoorManMods 8 күн бұрын
Helll yeahhhh 🤙🤙😎
@danrooney3704 8 күн бұрын
Can't call it a mustang unless you take it crowd surfing
@PoorManMods 8 күн бұрын
🤣🤣
@RazoE 8 күн бұрын
I'm your number 3 follower 👍🏼
@PoorManMods 8 күн бұрын
hahah yesssssss
@NARFALICIOUS 8 күн бұрын
We have similar tastes in car bodies. For a time I wanted an early 90s SL300 with manual.
@PoorManMods 8 күн бұрын
I definitely have a thing for square vehicles 😆 I'd love if this was a manual for its current setup, but for "drag racing" it makes most sense to keep it auto
@Shirley-hr8tx 8 күн бұрын
Better of if you’ve already got someone helping pump the pedal anyway to do it the old fashion proven way
@Shirley-hr8tx 8 күн бұрын
Yes but be careful as it may suck air back through the nipple thread if to loose so use Teflon thread tape
@AUDITHISWORLD69 8 күн бұрын
The Mercstang gt500? 👀
@PoorManMods 8 күн бұрын
haha i like your thinking ✌
@jacksin3323 8 күн бұрын
Dude this is gonna be nuts. Always liked these, and never correlated that its luke a fox (one of my top 10)... GLAD youre gonna gut it of the insane german clockmaker complexity. LET THIS MAN COOK.
@PoorManMods 8 күн бұрын
@@jacksin3323 heck yeah thank you so much, glad you're looking forward to it also, I can't wait to make progress on it 😁🤟
@jacksin3323 8 күн бұрын
@@PoorManMods im in the middle of a 1j build to swap into my 88 supra, and i love a good swap series... get it, dude. Lets build some cars!
@PoorManMods 8 күн бұрын
@@jacksin3323 hell yeah let's do it!
@ryanh1444 8 күн бұрын
LOL the intro
@PoorManMods 8 күн бұрын
😅😅
@xninja166x 8 күн бұрын
Das Merstang Fuchskörper!
@PoorManMods 8 күн бұрын
Yes!!
@Typical_Garage 8 күн бұрын
Had me at making it as foxbody as possible. Lost me when you said it’ll make more than 200hp
@PoorManMods 8 күн бұрын
Hahah 😂😂😂😂
@shelvins1841 8 күн бұрын
You need a matching teal mk3
@PoorManMods 8 күн бұрын
Haha nah, I like my diversity, I hated having a silver ISF and IS300
@Chambers45 8 күн бұрын
Ohh hell yea!
@PoorManMods 8 күн бұрын
Yesss 🤙😎
@hachiback6018 8 күн бұрын
Race car!
@PoorManMods 8 күн бұрын
Heck yeah!
@xajhall 8 күн бұрын
we are so back
@PoorManMods 8 күн бұрын
I never left! 🤙😎
@sbennett1320 8 күн бұрын
You got a great channel. I wish you'd post more content.
@PoorManMods 8 күн бұрын
Thank you! 🙏😁 KZfaq throttles my channel so you likely wouldn't see my new content anyway, but I'll try to post more!
@01FozzyS 8 күн бұрын
Man that thing is clean! Freddy the Baller! Looking forward to this. Then you can race Tony Angelo and his Benz. 🤣
@PoorManMods 8 күн бұрын
It's stupid clean right?!? Haha racing Tont would be sick!
@tinystar3010 8 күн бұрын
Definitely didn't think of this car once as a 90s icon lol I expected you maybe bought a NSX and planned to restore it.
@PoorManMods 8 күн бұрын
Omg an NSX I wish!! 😍 Both are out of my budget but I actually prefer the new NSX, I LOVE LOVE LOVE IT
@tinystar3010 8 күн бұрын
@PoorManMods When I saw it was a merc, i was noping out, but when u said you're gonna bastardize it, I'm all in lol And yeah I'd love a NA1 or NA2 NSX! I'm still not a fan of the modern redesigned one tho
@PoorManMods 8 күн бұрын
@@tinystar3010 hahah im glad you're interested in the build, hope i can make it fun and interesting 😁🤟
@cjzeppy 8 күн бұрын
I’m glad to be one of the four followers who support this project. Might be my time to shine as the garage body shop guru helping to make it LOOK like a mustang. 😍
@PoorManMods 8 күн бұрын
Yessssss 🤟🤙😎
@HeyMK3Guy 8 күн бұрын
One of four checking in and ready for the ride!
@PoorManMods 8 күн бұрын
Yess thank you!
@micahhill4786 8 күн бұрын
Put a Coyote 5.0 in it and somehow some way get the roush mufflers on that car to make it sound like a Mustang. It would be sweet, I know the coyote are expensive right now.😂
@PoorManMods 8 күн бұрын
Hahaha that would be siickkkk but noo 😅
@siqsteen 8 күн бұрын
everythings expensive tbh lol
@PoorManMods 8 күн бұрын
@@siqsteen yeahhhhh :(
@RingoTTV 8 күн бұрын
Mercedes guy here. I love seeing swapped Mercedes more than anything 😂
@PoorManMods 8 күн бұрын
Haha yesss!!!
@Ironsights85 8 күн бұрын
haha! thats tremendious!
@PoorManMods 8 күн бұрын
Hahaha 😁🤟
@mattkulesza7766 8 күн бұрын
Mark would say to put a 5.0 in it! 😂
@PoorManMods 8 күн бұрын
Haha right? 😂
@natelindquist2552 9 күн бұрын
I could have sworn that the T mark on the cams lines up with the point that you have it at on the crank
@mxxmikexx1 9 күн бұрын
I like it but why does the cutoff line have that "step" in the middle. its not a straight line.
@PoorManMods 9 күн бұрын
I'm not sure but there's gotta be some reason behind it, the projector headlights in my 4runner and IS300 do the same thing
@BuBu-gp4pz 9 күн бұрын
Only problem is the charging port if you lose the cord your screwed
@hilltop565 9 күн бұрын
Cheesus christ 😂
@Jay_Silvia 10 күн бұрын
3UZ cost 1500 but i want to track my car and daily. I'm gonna sell my crappy 3gfe if i can sell it.
@sicknessvssalvation4651 10 күн бұрын
is their a torque number for the oil pick up tube? pls
@PoorManMods 10 күн бұрын
I just made it tight lol