Hesco 4800 LV - The Ultimate Low Visibility Level IV?
Рет қаралды 9,418
Күн бұрын💲Links: campsite.bio/buffrange
Join this channel to get access to perks:
/ @buffrange
Esstac: bit.ly/45jA2gn
Hesco 4800 Test: • Hesco 4800, NIJ Level ...
This demonstration pertains only to the samples tested. This demonstration/review
may not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any federal government agency. Always seek official NIJ accredited labs reports for threat profiles.
* * The information presented in these videos is technical and educational in nature. All safety precautions are followed. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. This video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms.
**This video could contain affiliate links. If you use these links to buy something we may earn a commission. Thanks for the support! #Hesco #4800LV #M2AP #M80A1
@WildManActual 9 ай бұрын
You are BETTER than a NIJ lab.
@seanmtak7573 8 ай бұрын
Agreed
@aesthetic8780 8 ай бұрын
Way better.
@TimberwolfCY 9 ай бұрын
Dude, thanks a lot to you and your family supporting for the work you do. Awesome stuff as always!
@BuffRANGE 9 ай бұрын
Our pleasure !
@kallen8757 9 ай бұрын
Most underrated “guntouber”
@BuffRANGE 9 ай бұрын
Thanks !!
@-The-Bob- 9 ай бұрын
Absolutely love your channel and what you do. Thanks
@BuffRANGE 9 ай бұрын
Thank you kindly..
@adamrodgers2377 9 ай бұрын
Thanks for another awesome test.
@BuffRANGE 9 ай бұрын
You are most welcome
@witchdoc5075 9 ай бұрын
Even for around $2200/pr if I could afford it, I'd have it. Very impressive.
@pouuko7656 9 ай бұрын
There's a photo of i believe one of these plates with an impact from a 7.62x54mmR round from an SVD Sniper rifle The ukrainian soldier only had a bruise on his back
@Sightbain. 9 ай бұрын
I would be interested in seeing it drop tested first, but still fantastic performance from these plates especially for the weight and thickness.
@peterv1318 9 ай бұрын
Exactly
@JWard2 7 ай бұрын
Thank you for all you do
@BuffRANGE 7 ай бұрын
You are so welcome
@slim7980 4 ай бұрын
Thank you for testing these plates. This was an awesome test! I thought those M855A1s would go through at some point.
@BuffRANGE 4 ай бұрын
You’re welcome
@vasterasjonas1 9 ай бұрын
Good video. Should do a vid ther you show all the plates and diference of the cheremics.//Sweden.
@jay.d.8906 9 ай бұрын
Awesome video! Adept Mantis next please!
@airair862 9 ай бұрын
BUFFMAN R.A.N.G.E!❤ 7.62×51 - MV - 💪!
@SH-vi8iw 9 ай бұрын
This is super odd ball. Isnt the vanilla 4800 suppose to do more? I mean the LV is the FBI HRT version of the 4800 that ditches the foam. I guess this is kinda like the E-SAPI performance varies lot to lot.
@noneyabiz8225 9 ай бұрын
Getting a second mortgage on the house for "home improvements"...
@derrickkolba 9 ай бұрын
hey matt may i suggest for some new and different content you go visit and record the making of hesco or some other manufacturers plates might be something your viewers would enjoy.
@BuffRANGE 9 ай бұрын
99% of these company's have proprietary machines or processes that they won't let me record..
@Halal_Dan 9 ай бұрын
Oof you did the low vis one too
@nickgrady-xx7mm 9 ай бұрын
Nice plate!
@KirShizzle 9 ай бұрын
Really surprised the LV did better than the regular 4800s
@rre9121 8 ай бұрын
Nice testing. Any chance you'll get to those 350L videos soon?
@BuffRANGE 8 ай бұрын
Damn it I knew I’ve been forgetting something. I’ll start working on those.
@TheFlea1987 9 ай бұрын
Have you ever done a test on the Hesco 4400 MC level 4 plate? I have looked for it but it might just be lost in the tubes of you. They're a little on the heavy side but have had my eye on replacing my L210 with the 4400 since it seems like a much more capable plate for the money.
@BuffRANGE 9 ай бұрын
I believe this was a 4400, but I'm not sure if this is the 4400 pre or post recall? kzfaq.info/get/bejne/aciDnqxlqJ2Zhqc.html
@997JM Ай бұрын
Awesome video Matt - thinking about the Bills player Damar Hamlin that died from a hit on the football field, what do think happens to someone wearing armor like this that survives getting shot but is absorbing all of that energy. Is there a way to quantify that? I'm thinking broken ribs, liver punch like MMA has never seen all the way up stopped heart.
@BuffRANGE Ай бұрын
From what I remember he had a heart condition, but didn't die. Certainly there could be various after affects especially with larger caliber shots. There's a video floating around where a guy took at .308 point blank while standing on one foot, and just kept talking like nothing happened. I'm not sure if there are any statistics on BFD long term affects. I think I've seen it stated somewhere that no one has died from BFD against a round that an armor panel was meant to stop. If anything prioritize lower BFD performance on plate choice if that's a concern.
@997JM Ай бұрын
@@BuffRANGE He was revived and AFAIK all well and playing some - en.wikipedia.org/wiki/Damar_Hamlin
@swiftey3973 4 ай бұрын
Hey great video and great test as always. I have a quick question I can’t seem to find this exact plate whenever I search “hesco 4800 lv4 low visibility plates” all it brings up is the 4800 plates. Those aren’t the same right the regular 4800 are thicker? If you have the proper link or something I would greatly appreciate it if you can guide me in where to find this specifc plate. Thanks
@BuffRANGE 4 ай бұрын
Right here :) midwestarmor.com/products/hesco-4800lv-level-iv-multi-curve-plate-set/
@swiftey3973 4 ай бұрын
Thanks for the reply I found it 👍🏻. But I had another question about this plate, this plat will for sure stop slower threats like 7.62x39 AP rounds, etc right.
@BuffRANGE 4 ай бұрын
Yes. Their L210 stops that round but it doesn’t hurt to ask them if they have official testing
@chuckfinley3152 9 ай бұрын
What powder are you using in the 300? Retumbo?!
@BuffRANGE 9 ай бұрын
IMR-4350, RL22
@surgetsann 9 ай бұрын
I get not doing the NIJ drop on these... but I really REALLY would have liked to see these drop tested in a plate carrier.... obviously theres a lot of variables between carriers but at least a popular one like the JPC, SPC, or LV 119 would have been nice. Ideally stepping down from fully loaded placard to empty placard to slick. These are exactly the same as the regular 4800s except for the foam. so frankly the only thing I would have been interested in seeing is a drop test
@BuffRANGE 9 ай бұрын
Sorry :( Vendor donated it, and that was their request..
@huwhitecavebeast1972 8 ай бұрын
Pro tip: Don't drop your plates.
@ijkledkrtmfgekr 9 ай бұрын
I understand you respecting esstac and not dropping it….. but it’s always gonna linger in the back of my mind if it would’ve failed or not
@Halal_Dan 9 ай бұрын
Don't drop your PPE and you're good
@jay.d.8906 9 ай бұрын
Do you not wear a vest around your plate when you wear plates?
@cjf-rw8vl 9 ай бұрын
@@jay.d.8906If you fall hard enough to break your plate, you probably broke something else too.
@KeterMalkuth 9 ай бұрын
@@Halal_Dan Drop tests aren't solely meant to test for drops specifically, rather, anything that can cause the ceramic to fracture. Regardless, "Don't drop your PPE" is great in theory, but when you're actually wearing it, trips, falls, bumps, smacks, strikes, will happen eventually. This plate not being intended for the same degree of durability not withstanding, mind. Just speaking generally.
@jay.d.8906 9 ай бұрын
@cjf-rw8vl yeah, thats a.. trip I would not want to take... id end up seeing you next... fall...
@bconn6110 9 ай бұрын
So the takeaway from this video is HESCO makes good plates. L210 to the higher end ranges, all are worth buying.
@BuffRANGE 9 ай бұрын
All depends on your mission. I would argue the 1092 from RMA is superior to the L210 and the 1192 is better than the 4800 albeit 1 lb heavier.
@2A.Freedom 8 ай бұрын
For 1200 bucks it better be a good plate lol
@rrr3r2 9 ай бұрын
Seams like any of those would knock the shit out of you
@nateginter1234 9 ай бұрын
Whats up with adept? The customer support number is wrong on the website and goes to some random guy on a cell that says wrong number. The address to the company is also not legit. What's the deal with this company?
@BuffRANGE 9 ай бұрын
Let me ask em.
@nateginter1234 9 ай бұрын
@BuffRANGE thank you very much. My buddy and I were very interested prior to getting the strange response. Keep me posted please.
@BuffRANGE 9 ай бұрын
@@nateginter1234 they will get it updated.
@InkwellFoto 9 ай бұрын
What's the best plate you've tested? And what were you impressed by based on low cost?
@BuffRANGE 9 ай бұрын
best in terms of stopped threats? Or best in terms of coverage/cost/weight/quality?
@InkwellFoto 9 ай бұрын
@BuffRANGE stopped threats. And the second was best in terms of budget.
@BuffRANGE 9 ай бұрын
@@InkwellFoto Adept Colossus hands down..
@InkwellFoto 9 ай бұрын
@@BuffRANGE thanks, I don't think I ever heard of that brand or saw the review. I guess I get caught in the marketing hype and gravitate towards brands like Hesco.
@BuffRANGE 9 ай бұрын
@@InkwellFoto Colossus Review here: kzfaq.info/get/bejne/e694eJWDz8yoZ3k.htmlsi=0D6wkwNnBAhFKTta There's nothing commercially available that exceeds it's capabilities, vs price and weight. Maybe the Dragon Skin from Stealth Armor as I know he was looking to use/license the ceramic Adept is using. The RMA 1192 is close but falls on the M993 performance.
@SkywalkerPMs 8 ай бұрын
Flail chest, and possible pneumothorax for $2k. Im a retired Combat Medic.
@andreahighsides7756 8 ай бұрын
Saw many back face deformation casualties did ya
@bigingo4269 4 ай бұрын
best Plate ??
@BuffRANGE 4 ай бұрын
I've made this list based on what I've tested, and if "BEST" is encompasses threats, weight, and value, then this is pretty much what I got in Level IV: Adept Colossus US Military XSAPI RMA 1192 Militech RF3 Black Label Stealth Armor Systems Dragon Skin or Hexar Solid Spartan Armor Hercules Xtreme (formally Ares) Hesco 4800 US Military ESAPI RMA 1165 Hesco 4601 Highcom 4S17M RMA 1155 Botach Battle Steel Level IV (Longfri Plate) LAPG Level IV or similar (foam edges, bare min budget recommendation)
@pjbiggleswerth8903 8 ай бұрын
Hillbillies shouldnt be so well spoken. But i love the channel none the less.
@BuffRANGE 8 ай бұрын
I don't know if I'm a Hillbilly. I quite like my city things like gas, sewer, water :D
@Halal_Dan 9 ай бұрын
U210 next? lol
@BuffRANGE 9 ай бұрын
They were going to send me an L211.. The U210 sounds expensive..
@Halal_Dan 9 ай бұрын
Well I thought the 4800 was too expensive and here we are lol @@BuffRANGE
@BuffRANGE 9 ай бұрын
@@Halal_Dantrue. :$ I can certainly ask :)
@famouscustomm5291 9 ай бұрын
😅
@TheKalkara131 8 ай бұрын
I thought that these looked pretty good, all in all. Then I checked the price. Pair of large plates is $2600
@BuffRANGE 8 ай бұрын
Ohh yeah very spendy!! I feel the RMA 1192 is a better value even if it’s 1 lb heavier.
@TheJoeml85 8 ай бұрын
Check out the shellback lightweight plates they are multi curve made in USA they are normally like 450 each but some site has them on sale for 267 each and they only weigh 5.7lbs!!
@BuffRANGE 8 ай бұрын
@@TheJoeml85those sound just like longfri plates.
@TheJoeml85 8 ай бұрын
@@BuffRANGE i think the are made by rma
@TheJoeml85 8 ай бұрын
SHELLBACK TACTICAL PREVAIL SERIES LEVEL IV MULTI-CURVE 10" X 12" HARD ARMOR PLATE - MODEL 4SICMH
@VolkZ-wl4ci 9 ай бұрын
>$2625 Oof
@edgarburlyman738 9 ай бұрын
Just a 3lb 3+ in the front crew IIIa in the back Taking rifle fire from behind you're omae wa
@noThing-wd6py 3 ай бұрын
Just sad that i can't get thoose in Europe 🥲
@BuffRANGE 3 ай бұрын
I'm sorry :(
Uncle Freedom
Рет қаралды 57 М.