High Flow Catalytic and downpipe install B8/B8.5 Audi A4 plus crackle tune and Review

Рет қаралды 24,753

LateNightGarage

Жыл бұрын

‪@Audi‬ ‪@ecstuning‬

Пікірлер: 72

@jonathansooknanan7847 11 ай бұрын

That boy can slide with no fear in the snow !!! That’s talent

@latenightgarage7895 11 ай бұрын

Thanks

@michaelselway9961 Жыл бұрын

Thanks my dude for that over the engine trick I was stuck for. A minute I didn't have a long enough extension to go from under

@latenightgarage7895 Жыл бұрын

Yeah, it definitely helps. Thanks for watching.

@the_bionic_rooster2742 4 ай бұрын

Shoutout to you my boy for the video and tips best out here cheers to the build🤙

@latenightgarage7895 4 ай бұрын

Thanks for watching.

@orsencart 5 күн бұрын

Nice to see people still working on these I got the same exact model. any issues with yours? I got the ie catted dp as well as the cai looking forward to doing this install myself 😅

@Matt-rk3de Жыл бұрын

Thanks for taking the time to educate other people 💪🏽

@latenightgarage7895 Жыл бұрын

Appreciate you watching

@easysnipes7506 3 ай бұрын

What is your intake?

@micahrobinson530 2 ай бұрын

You shouldn't really smell fuel with a high flow cat unless your tune is too rich. For reference, I'm running catless longtubes on a 600hp supercharged v8 (e55 amg) i dont smell fuel unless im full throttle, normal druving is fine

@presleydahlgren5197 Жыл бұрын

Do you know if you have to get a tune after you install a turbo back exhaust? Or is it best to get a tune for check engine lights that come up?

@latenightgarage7895 Жыл бұрын

Best to do both at the same time, not only is there the check engine light but you be throwing off the ecu which could cause issues.

@ethan5977 Жыл бұрын

What’s that tool you used to get the o2 sensor out? Never seen it before looks like a socket with a slot for the wire I guess

@latenightgarage7895 Жыл бұрын

O2 sensor socket

@530_vlogs2 Жыл бұрын

I’m currently trying to take my own car off to do this but the bolts on the car to the turbo don’t budge at all what tools did you use I can’t fit a deep socket on it cause it hits the cat but the smaller ones aren’t deep enough. Thanks

@latenightgarage7895 Жыл бұрын

Hey, my apologies for the late response, I hope the installation is going well, but to loosen the bolts on the stock cat you'll need some wrenches to help brake them lose. Then you should be able to use a short socket on them to take them off, when you install the new ECSTUNING cat you can then use a deep socket to tighten.

@andresruiz4515 Жыл бұрын

One of the best videos and well explained step by step, by the way, how long did it take you to change the parts?

@latenightgarage7895 Жыл бұрын

Thank you, I'd say probably 4 to 5 hours since I never did this before to an Audi and it was cold in that garage.

@andresruiz4515 Жыл бұрын

@@latenightgarage7895 thank you I’m planning to do this upgrade on my b8.5 after temp’s gets little warm

@latenightgarage7895 Жыл бұрын

@Andres Ruiz there's a while exhaust setup on ECStunings website that is a single exit but it's like 800ish but you get the cat, downpipe, mid pipe and muffler with tips. I could be off by a bit but I think that would be worth it more than just this setup. I Also added IE stage 2 tune and it's great, all I'm missing is the big intercooler

@mobydik378 Жыл бұрын

I did this myself yesterday and it was pretty difficult getting the nuts off the cat. I broke one of the bolts on the flange for the cat it was so rusty. I just put the other 3 and let it be and I didn’t see no problems as of yet tho.

@latenightgarage7895 Жыл бұрын

@moby dik If it starts to create a tiny leak, I would suggest removing the three and using a visegripe to remove the broken bolt. They do remove when turned, so that might be your next project, oh, and try to get a small size visegripe. But anyways, good job on the installation. Did you get a stage two tune with it?

@andrewrodriguez8008 2 ай бұрын

Hey man, how does your turbo spool when you rev in park/neutral? Everytime i rev it , it dosent make the spool until I take off .

@latenightgarage7895 2 ай бұрын

Hold brake and gas

@michaelselway9961 Жыл бұрын

So far I'm stage 1 full borla exaust with a cts high flow cat , and I have the cts intake gonna get an intercooler and I'll be going to stage 2

@latenightgarage7895 Жыл бұрын

Nice what tune you gonna use?

@corman9817 6 ай бұрын

Hey bud question for you. Is that the factory maf assembly with just a cone filter fit onto the front of it and an aftermarket turbo inlet stuck onto the back of it? Think that's what I'm gonna do.. just wondering if it throws a code.. thank you

@latenightgarage7895 6 ай бұрын

That's how it's set up ha, didn't wanna pay $300 for a set up that does the same thing, and no it doesn't throw a code

@corman9817 6 ай бұрын

@latenightgarage7895 right on man good thinking. I'm going to do the same thing. Yeah it'd be stupid to do anything other than that haha.. and I'm going to get the same high flow cat and downpipe too I believe.. how's the car on stage 2 & what year is yours?

@latenightgarage7895 6 ай бұрын

All I need is the IE inter cooler but besides that the stage to is awesome to have. Way more responsive with power. And it's a 2014

@maniboy3818 3 ай бұрын

How much horsepower does the 1.8/2.0 can make with those mod including with the downpipe and intake stage 2 tune

@latenightgarage7895 3 ай бұрын

Go to www.performancebyie.com And they have different results for different mods and tunes.

@alexschubert7703 Жыл бұрын

Nice vid my dude. I'm about to toss IE's HFC/DP on next weekend along with Stage 2. Curious how big of a difference you noticed going from stage 1 to stage 2. Also curious if you have any drone after removing that 1st resonator.

@latenightgarage7895 Жыл бұрын

Thanks for watching, subscribe if you like it and wanna see more in the future. It's makes a big difference I noticed, the turbo build boost quicker and the response is better. It has a really nice pull in 1st going 20ish and in 2nd or 3rd gear around 35xx rpm I noticed. One thing I would definitely recommend is the IEs intercooler which I need and replace the stock intake box. There feels like it's has more to give but can't with the small stock intercooler. As for drone it's not that bad.

@hunterc282 9 ай бұрын

Have any issues getting the factory cat out? Couldn't get mine no matter what I tried

@latenightgarage7895 9 ай бұрын

Did you separate the cat and stock down pipe? If not that's probably why and you'll have to separate them

@hunterc282 9 ай бұрын

@@latenightgarage7895 yeah had the downpipe completely out as I replaced that aswell, but still no room to remove out the bottom and up top it hits a heatshield and the turbo flange

@latenightgarage7895 9 ай бұрын

You'll just have to keep turning and yanking on it. It'll come out eventually.

@STV.. 6 күн бұрын

I think that’s turbo flutter I’m hearing, what are all the mods you had on the car besides this exhaust? I want the flutters more than anything lol

@latenightgarage7895 6 күн бұрын

It's a forge BOV

@nateweiss7276 10 ай бұрын

Will the high flow itself bolt up or do I need the down pipe also

@latenightgarage7895 10 ай бұрын

Best to buy the HFC and down pipe together from ECStuing

@Gabriel-rq1wl Жыл бұрын

How did you get the stock cat out?

@latenightgarage7895 Жыл бұрын

From the bottom

@stubbzy4269 Жыл бұрын

what's your setup for it to flutter?

@latenightgarage7895 Жыл бұрын

I have a Forge BOV on the turbo bought it on ECSTuning

@cooperchildress2752 3 ай бұрын

What’s done to it to get so much turbo noise?

@latenightgarage7895 3 ай бұрын

Replace the stock box with a open filter or if your talking about the blow off valve, it's a Forge BOV

@mattisspicy7502 Жыл бұрын

Car smokes like crazy must be bc it’s winter ?

@latenightgarage7895 Жыл бұрын

Maybe from the new high flow cat, new metals being burned.

@titaniumman_22 9 ай бұрын

Will this still pass emissions testing?

@latenightgarage7895 9 ай бұрын

It should since it's still a catalytic converter.

@Charlie7146 7 ай бұрын

I have the same cat, it throws a CEL without tune, it did for me anyways. I put an O2 spacer on it , took my tune off and passed fine after drving around a bit

@JayDay-f9d 24 күн бұрын

Tool sizes????

@latenightgarage7895 24 күн бұрын

Did i not say the size?

@bennettchumley4139 Жыл бұрын

Did this throw a check engine light?

@latenightgarage7895 Жыл бұрын

Yeah, it's best to have the stage 2 tune ready after, I have IEs stage 2. Basically they send a connector for the OBD2 and you have to use your laptop and the app you download, it's very easy to do. They are coming out with a mobile app soon, not sure when ig for tunes so that will be cool to see.

@pedrocastaneda919 Жыл бұрын

@@latenightgarage7895 Is IE stage 2 tune compatible with cts air intake and ecs HFDP ? curious to know before purchasing !

@latenightgarage7895 Жыл бұрын

@Pedro castaneda should be, I don't think a air intake will effet anything but to get the most potential out of the tune your gonna want to get the IE intercooler sometime.