No video
Higher Quality LS Swapped 3rd Gen Camaro!
Рет қаралды 30,750
Жыл бұрынMy 1985 Iroc-Z LS3/T56 swapped 3rd gen Camaro powered by Fitech ultimate LS. This LS swap build has turned out really nice and is high quality. What a blast these 3rd gens are with a decent power plant installed into them. Built not bought and lots of good information in this video about ls swaps and performance mods. Let me know any questions you have always willing to help out fellow gearheads. Lol had to trigger the Ford Chevy debate. Me personally I like a lot of different muscle cars. Ford, Chevy, Mopar. P.S. the F250 is a truck I bought is to flip Im using it to pull my heavy enclosed trailer to AZ.
@Hawks Motorsports
@umiperformance
spal cooling fans.
SPAL 30102038 12" Puller Fan 12 VOLT High Performance Straight Blade 1640 cfm w plastic shroud www.amazon.com/dp/B08BKWTT6M/...
Fuel Pump Aeromotive 340 stealth
a.co/d/ib5Kb2b
Koni Shaft mounted bump stop.
Koni (71 34 42 000 0) Bump Stop
a.co/d/hq9zFQL
Tires Nitto NT05 295/35/18
@walterrezendes4507 Жыл бұрын
In midst of ls3 swapping my 87 iroc,great inspiration you put out,first third gen hood louver install mod with under hood insulation installed👍,super clean,great attention to detail,good luck on your ventures.
@Brandon-LSX Жыл бұрын
Thanks you'll love the LS3 it's a great platform. One thing I've learned doing the swap is it definitely pays off to spend a little extra time on all the little details. Good luck on the build.
@GA08GT478 Жыл бұрын
Amazing build! I’m a longtime Mustang owner, but I love Camaros too.
@zehnlol9695 Жыл бұрын
This comment is everything. My dad raised me Chevy and I’m building a third gen with him, but man some mustangs are beautiful. More appreciation in needed in the car community.
@jjay718 Жыл бұрын
Awesome build! I really like UMI they make great parts. Ive been thinking about getting another thirdgen to swap.
@JohnSmith-dc1xf Жыл бұрын
Love when I see a swap thats not a hack job, still has AC, Im sure everything works like when it was new.
@user-ce1pm6gb3b 2 ай бұрын
Absolutely impressed with everything you have done. I have a 1991 convertible that i want to ls swap
@DonaldHuff-pr2ur Жыл бұрын
Great build with a lot of great ideas for my build im working on now. Great job! I noticed you have your coolant bottle tucked on passenger side. Can you give more details on what bottle and how you mounted it?
@MH-qq4ym 6 ай бұрын
So I need to get my 1987 L98 5.7L TPI and swapped in T56. I need to wire up the T56 to work the reverse lights / lockout/ and Speedo. Eventually, the L98 will be gone. But someone put a lot of money in go fast parts and it is fresh. She is rowdy!
@jaydeee5961 Жыл бұрын
Hello forgive me I’m just finding ur account. Just subscribed!! I’m in the west coast with an 88 5.3 Trans Am excited to get tips and see ur old and new videos !!! Beautiful car man !!!!
@BornToBeFamed 6 күн бұрын
I liked that 5.3. Could’ve used some clean up but it was clean!
@Slowmo896 Жыл бұрын
Cooling fans aren’t always the issue, it can be too small radiator,or air in the system, and not bled correctly,or a bleeder isn’t installed or higher than the t-stat..
@joebom1981 6 ай бұрын
Nice Camaro I had a 1991 Rs red got in trouble back in 90s I raced stock 5.0 stangs aka Foxbody they weren't pulling away I was right next 2 them even beat some had 305 if only I had an engine like that
@1slowm6camaro83 Жыл бұрын
Awesome build man!!Can you post a link for the ac bracket and how much did you have to trim?
@DenverKronwell-lo6yr Жыл бұрын
This is an incredible build. Can you tell me what brand wheels are you running, size and offsets front and back? Also what tire size on the front? Thanks!
@JonOffgrid 9 ай бұрын
😎👍 I been working on k3500 95 LS swap having a hard time with the LS msd back firings 😢🔥
@jeffreymadia1725 Жыл бұрын
I have a flawless 28k mile red 5.7 T top wanted to do a ls swap but build will be out of my budget to do what I want so probably replacing motor with blueprint 350 with a d-1sc procharger that I already have
@georgieh91 Жыл бұрын
? back in PHX what's up budd hope I catch you driving around here in your Camaro. I got a 91 RS in the works
@yamahchopper Жыл бұрын
Awesome car
@BoomerDH81 11 ай бұрын
Can you put links for the gauge cluster? I like that look it looks sick
@isaacle2081 9 ай бұрын
What intake tube are you running? And what did you do for the top radiator hose?
@MrRoberoni117 4 ай бұрын
Now you got it all working you gotta knock it all apart and repaint the whole car
@NSTY_6.2 10 ай бұрын
Beautiful set up bro, what Y pipe is that and from where?
@MidwayStreetcars Жыл бұрын
Did you have to have this tuned to get to run as good as it does or is it all the self learn? Looking at getting the FiTech system for my 6.0 el camino
@TheSlim93gt Жыл бұрын
Nice ride for sure. You don't see many nice 3rd gens in my area. Have you ever thought of using heim joints in your rear lower control arms? Let that axle articulate!
@Brandon-LSX Жыл бұрын
Hey thanks I've thought about it. I've seen another youtuber named @3rd gen guy running something similar. But have my eye on boost first I've been itching to go forced induction.
@noed.7654 Жыл бұрын
Looks amazing. That's so me with 4.8,hahhahahaha Love the car. Inspirational!
@thomasnichols3950 Жыл бұрын
Any interest in doing it again? My 3rd gen was a magazine cover car but has never ran right with the LT1 swap and has been sitting for 10 years. Would like a clean LS swap done but finding someone to do it is hard.
@sixeight6 6 ай бұрын
Good video im working on my iroc dont know if i should ls swap or rebuild the original engine. How much are money are u into the swap?
@metaltera86 2 ай бұрын
I’m seriously considering purchasing my father in law 85 iroc z with the 305 and 700r4. My intention would be to LS1 and T56 swap it with a black paint job. There is some sentimental value in the car itself compared to any other Camaro/firebird out there… but is this swap worth it for the $$
@ron_g72chevy Ай бұрын
How can I get my ls 3. Run like your I have a Fitech ultimate ls stage two cam. Drove today and it’s like it doesn’t have that get up and go about it
@IStoleYourTwix 3 ай бұрын
Im workin on an ls swap for an 84 camaro and i have many questions about little things
@Skynyrd-fx2mi 3 ай бұрын
What control arms are you ysing
@juanmena4676 Жыл бұрын
Where are your coolant and wiper reservoirs
@lincolnshirah1693 2 ай бұрын
Need to get a carpet on that dash ASAP those are known to crack from the sun mine has a little crack but save it before she goes
@user-uw1ox2ei2x Жыл бұрын
Can you send me some information about everything that you put in your car I have a 3rd Gen. That I'm doing and I'm really interested in the parks that you eat
@CMajor007 10 ай бұрын
What rear end are you running?
@TiptonGarage 3 ай бұрын
what trans are you running?
@SniperMan5858 10 ай бұрын
Why not relocate rhe AC compressor to the top?
@richardtello5874 Ай бұрын
whites the info on the cooling fans plz....?
@BOHICA1411 Жыл бұрын
I’m pretty interested in how you got the low mount AC compressor to fit! I have been contemplating pulling the engine out of my C5 which has the low mount ac, and slapping that in my third gen. Was curious if it would fit and that would definitely be beneficial to my decision!
@Brandon-LSX Жыл бұрын
The AC compressor will fit with stock k member if you notch it out with the notch kit.
@chevelleguns92 Жыл бұрын
Air intake tube looks really good, did you use a certian kit or just some random stuff?
@Brandon-LSX Жыл бұрын
I used the air raid build your own kit off Amazon.
@curiousumscientia3648 Жыл бұрын
Thank you for your videos. Which drive accessory style are you using? I have low mount alternator like yours with GTO mounting and have interference between the pitman arm of the steering box and alternator in certain steering angles. Any info you can share would be appreciated
@Brandon-LSX Жыл бұрын
It's a aftermarket ls1 style kit off Amazon.
@brandonparker5941 Жыл бұрын
I've been looking at moving up to 17 or 18 inch wheels. If you don't mind me asking, but what offset are you running for 10.5 wide wheels? I currently have 15 inch that have 3.75 backspacing and not wanting that much wheel/tire sticking out when moving up in wheel size?
@Brandon-LSX Жыл бұрын
Running 6.5inch back spacing on the 10.5 rim in the back.
@SibRevs Жыл бұрын
Nice car man. Quick question: what do you think is the best tire size for daily driving on the stock 16" rims? I can't find the recommended 235/55/16 anywhere.
@Brandon-LSX Жыл бұрын
There's a tire size calculator that will help you dial in sizes. I prefer a wider tire for grip but as a daily would probably best best closer to stock size.
@robertbobpoirier7529 Жыл бұрын
Fucking nice built!!
@mschumaker1 3 күн бұрын
Really nice work. Looks factory. Seems like those tires are too small for the wheels tho
@midnight347 11 күн бұрын
This is where gm guys should swap their ls engines NOT mustangs. These and g bodies and stuff like that are awesome with a nice ls/t56 combo. This one is nice. Even older s10 would be awesome for an ls swap.
@johncraft05 Жыл бұрын
I'm in the middle of swapping my 85 trans am how did you go about the wiring for the headlights and turn signals where you able to keep the factory system for that and what about the wipers is it just a matter of running power to something
@Brandon-LSX Жыл бұрын
Yes I kept all the factory wiring and lights off the bulkhead. Just trimmed off all the old engine components.
@fawnkeydave8336 Жыл бұрын
I recently bought a 1985 camaro v6 manual 5 speed. I'm wanting to upgrade my car to a nice daily driver but still have some kick in it. I'm new at LS swaps and I usually like the classical sides of things, but I wouldn't mind going into the LS swap route, I just want something that is going to be decent on gas but will still be decently fast and sound nice as well. I like the idea of having a modern 4 cylinder. But I can deal with v6s if needed. I feel lost, I'm not sure where to start or where to look. I love that you have upgraded a lot of things on this car though, I will for sure use everything you have mentioned as a primary reference. I was just wondering if you, or any of your subs had any advice for me.
@Brandon-LSX Жыл бұрын
Thanks I appreciate the comment. I mean ls swaps are definitely the way to go in my opinion. They make good power and very reliable.
@fawnkeydave8336 Жыл бұрын
@@Brandon-LSX I understand that they are reliable. but in any way could they more fuel efficient? I'm trying to have a good preforming setup and get great gas millage.
@earnestwalker5256 Жыл бұрын
Nice
@Brandon-LSX Жыл бұрын
Thanks.
@PlayWitIt Жыл бұрын
How do you like the Fitech system? I've been hearing different things about it vs Holley but I've watch all your videos and it seems like it's running well for you ...
@Brandon-LSX Жыл бұрын
It's been good considering what I paid. I'm not running a transmission controller or boost which probably makes a difference but I'm happy with it.
@donhokirk9379 2 ай бұрын
I'm curious what a car like this costs?
@gth213 Жыл бұрын
Love the build but did you say LS1 brakes in the back?
@Brandon-LSX Жыл бұрын
Thanks yeah running the ls1 rear brakes.
@skipper3979 Жыл бұрын
That’s awesome that you’re moving to Phoenix cuz now you won’t have to store the iroc away for half of the year 😂
@Brandon-LSX Жыл бұрын
That's the best part lol.
@Slowmo896 Жыл бұрын
You should of cleaned the under carriage better the floor boards have a bunch of build up on them, I cleaned mine and had them repainted
@malc1012 Жыл бұрын
Are champion fans good? Thank you for the Spal recommendation. I’m having cooling issues on my 86 TPI 305. Want to get the fans ready for LS someday .
@Brandon-LSX Жыл бұрын
Yes I've heard champion makes a decent fan. Seems like spals at the top though. They make all the fans for Ferraris.
@malc1012 Жыл бұрын
@@Brandon-LSX thank you! I’ll look into it. The good thing is I spend the money on a top fan for my TPI but will still work for an LS swap right?
@Brandon-LSX Жыл бұрын
@@malc1012 Yeah the fan will work for the swap. You can use them for different applications.
@malc1012 Жыл бұрын
@@Brandon-LSX thank you!
@CFHDime 29 күн бұрын
Is there any engine I can swap into my 87 IROC that’s pretty much plug and play? No cutting?
@ramblingsofnothing7783 Жыл бұрын
Why do you run a single tip instead of dual exhaust?
@Brandon-LSX Жыл бұрын
To hard to run duals on a 3rd gen and keep ground clearance. The 4inch tucks up really nice and and still go over a speed bumps.
@jeffreymadia1725 Жыл бұрын
Does the ls transmission fit in there without modification
@Brandon-LSX Жыл бұрын
Had to trim off 1 inch in tunnel.
@jt6bhgfgvujnnjjh Жыл бұрын
How did you fit the 295 in the back
@Brandon-LSX Жыл бұрын
Cut the bump stops off and boxed in spring perch.
@donteblack7294 6 ай бұрын
👍🏾👊🏽🔥🔥🔥🔥🔥🔥
@mosestoledo9184 Жыл бұрын
How much does it cost to build the camaro with the ls3?
@Brandon-LSX Жыл бұрын
10-20k
@datboired832 Жыл бұрын
I have a gap between my hood and bumper. Any suggestions?
@Brandon-LSX Жыл бұрын
There is 2 rubber stops that you can turn in underneath the hood. Try those first otherwise you well need to make more adjustments with the hood hinges.
@datboired832 Жыл бұрын
@@Brandon-LSX i was thinking about new hood hinges since the rubber deal.didnt work. Ty for the help
@datboired832 Жыл бұрын
To you have a link for the fans? Also for motor mounts would any work for that type of engine or are they all the same?
@Brandon-LSX Жыл бұрын
SPAL 30102038 12" Puller Fan 12 VOLT High Performance Straight Blade 1640 cfm w plastic shroud www.amazon.com/dp/B08BKWTT6M/ref=cm_sw_r_apanp_rsGTaUxBbLiKE
@Brandon-LSX Жыл бұрын
I'm using the ploy ls1 motor mounts. Any ls1 style will work with the right adapter plates.
@datboired832 Жыл бұрын
@@Brandon-LSX ty. I just got an ls1 dropped in my 86 and the alternator is hitting the hood. Im trying to figure out what can I do to fix my problem.
@Brandon-LSX Жыл бұрын
@@datboired832 Sounds like you've got the truck style serpentine belt setup if the alternatori s up high. ICT billet sales a low mount alternator bracket system to run the alternator down low like the factory LS1 setup that's what I'm running with mine.
@datboired832 Жыл бұрын
@@Brandon-LSX yes I do. I like that the alt is high but I guess i need to purchase the alt and ac bracket
@01ZO6TT Жыл бұрын
I’m going to unsubscribe since you got a Ford truck. Lol. You should’ve got a 2013 Silverado Duramax. I know I’ve said this before but, your Iroc is really close to what my plans were with mine. Including the Track Spec hood louvers. Perfect car bro!
@Brandon-LSX Жыл бұрын
Right lol I'm sure I'll lose a few. I was looking for a durmax but all the ones in my price range were clapped out. Funny thing is I bought the truck to flip when I get down to AZ. Needed something to pull my enclosed trailer for the move. Thanks man appreciate it.
@jimmywarfield9914 Жыл бұрын
What did you end up using for the fuel system?
@Brandon-LSX Жыл бұрын
Aeromotive 340 intank pump
@jimmywarfield9914 Жыл бұрын
Ah nice heck yeah, how did you get power back to it? Did you use original tank or no?
@mikebruegger8654 Жыл бұрын
Nice ride....
@Brandon-LSX Жыл бұрын
Thanks.
@yharnam_1174 Жыл бұрын
How much did you spend on this build?
@Brandon-LSX Жыл бұрын
Alot haha.
@Slowmo896 Жыл бұрын
I hated my gen3 ‘s cross member they are freaking huge..and a PIA to get headers in and out.l
@malc1012 Жыл бұрын
I didn’t see the Cat. You’re running a cat on your exhaust? You did say cat back .
@Brandon-LSX Жыл бұрын
Not running any at the moment. Catback just refers to the exhuast section behind the cat.
@brenontech Жыл бұрын
could you put a price on it
@Brandon-LSX Жыл бұрын
It would be pretty hard.
@Matthew-wn8oq Жыл бұрын
Sell?
@Brandon-LSX Жыл бұрын
Don't want to sell but 30k might get it done lol.
@Matthew-wn8oq Жыл бұрын
@@Brandon-LSX if you're serious and would do it send me your email or contact. I'm closing on a house in a week and half.
@Matthew-wn8oq Жыл бұрын
I went over the numbers with my wife last night and I am only going to have $25k cash after figuring expenses . I'm going to call my bank today and see if I can get a loan for a few thousand. I will be in touch.
@Slowmo896 Жыл бұрын
What a crappy job was done at first..just tossed in the whole truck engine and all..
@glizzybaylor5129 Жыл бұрын
Sell it to me
@Slowmo896 Жыл бұрын
Music sucks it always ruins videos
@midnight347 11 күн бұрын
Stop putting ls motors in fords!!!!! This is how an ls swap should be in an actual gm.
@Zerocyde Жыл бұрын
How is that torque arm mounted tranny side? Is that bolted straight to the tranny?
@BucketODigletts Жыл бұрын
i love the clean setup of your 3rd gen. I myself am still learning what i have to prep the car for in terms of fitment and clearance with the LS3 erod setup i want since im in CA. First up though will be the disc brake conversion and rearend. You should treat your third gen to some custom emblems like what ive done and barely just got them finally after a year of design and waiting. Do you have an Instagram?
@Brandon-LSX Жыл бұрын
Hey thanks. I'm sure living in Cali has it's own challenges to overcome with smog and emissions with the swap. Sounds like you've got a good game plan with brakes and rear end in mind. I do have a Instagram it's @Iroc LSX
@yamahchopper Жыл бұрын
Awesome car
@five0chris687 Жыл бұрын
Nice
@Brandon-LSX Жыл бұрын
Thanks
POWERNATION 2
Рет қаралды 357 М.
LSx MOTORSPORTS
Рет қаралды 45 М.
Larry Chen
Рет қаралды 190 М.