About time. Glad to see Hilti covering their bases with the Nuron. Even Festool felt the need to bring out a cordless recip. It's frustrating to have to run 2 to 3 different brands to cover areas and that's before we get to the compromises over the same tools between different brands. Thanks for the video - it's a great intro.

For a miter saw stand I think the Ridgid with the big wheels is the best bang for the price there is. That's what I got for my dewalt saw

This saw looks a lot like my Makita, only in red. Lots of similarities like the slides, handle position, rear arm design, etc. The shadow line is an improvement over the laser Makita uses tho.

Not sold on battery bench tools, especially expensive ones. I have a graveyard of drills and saws because batteries had been discontinued. Yet, my corded tools will work till they die, not when a manufacturer obsoletes them.

I got the dewalt 60v mitersaw kit a couple months ago and put it on the rolling ridgid stand and love it! I’ve built whole decks on one charge!

This saw looks extremely well built and legit

To lower they weight the could make the saw section remove off the miter portion then that could me modular for other size heads to be attached or new tool concepts. Oscillating chop blades as a future cutting method.

Looks like the Makita with a lot more mass (and weight). To bad Hilti matched the industry standard of 14” cross cut. 16” would make it more useful for building things like closet and garage organizers.

Red Makita

Holy crap! This looks freakin amazing!

Love the bevel lock is in front

Can’t wait for this to launch!!!

I like the trays on the stand, good for cutting list and bits n bobs, I make my own for most of my stands

They need to make a seven and a quarter version that’s the way battery chop saws r going , lighter more portable thus more user friendly and they virtually perform every task needed in fit outs because of the width they can cut hilti will definitely b missing a trick if they don’t make the baby brother honestly the seven and quarter is definitely taking over site work from what I’ve seen that said it looks a quality saw ( u wouldn’t expect anything less with hilti) and I love the bevel adjustments that r all at the front of the tool so much easier to work with but u know this thing is gonna b bank breaker ,double expensive

Im sold on the front bevel I already own a couple hilti tool and they are great tool.

Thanks again Rob and team for the information. At 47 ,my saw doesn't leave its rolling stand unless stairs are involved. For a folding stand,the top is very wide without providing any benefits. Looks like it takes up extra room when stored sans saw. I do like the shadow light,honestly should be standard on every mitersaw. Re; tailswing it has never been an issue. Junked a 12yr dw708 because of motor failure,but had no issues from its depth. Have a Festool (terrible handle),and 2 Bosch X-glides at work (saws try to push the saw up and towards you while cutting. Whatever gain in depth, is lost in safety and production. Hilti has become much better at being accessible for smaller companies, and bringing more tooling to the market. That being said as a sole person in my trim business, the lack of availability (60 miles to the closest store),and lineup ...it doesn't work for me. 12v Bosch, Milwaukee, and Metabo. 18v Ryobi, Ridgid, Makita, Metabo, Fein,and Milwaukee are enough to keep up with. Competition is always good for the marketplace, and who knows when they could release a new tool that could fill a need in my business.

Nice one. Thanks for the video.

Having a mobile stand with wheels would put this over the top. I’ve running Bosch gravity stand for over ten years on my 12inch miter saw. Recently purchased Festool cordless saw with stand. Haven’t made enough sawdust yet to give opinion but quality is top notch. Looking forward to see this Hilti

Nice looking tool. They really should try to make the variable speed low enough for a cold cut metal cutting blade (for steel). I’ve converted a Dewalt Flexvolt saw for that, it’s a very handy feature, with the growth in steel framing, and also steel lintels becoming common here in New Zealand. The saw itself looks well designed, especially the bevel adjustment levers being at the front. Wonder if the dust extraction is any good.

They listened I called earlier this year for cordless miter saw. I was transfered to support we talked he made notes. I asked if could make for us finish carpenter guys 7.25 saw he again made notes Hilton said they will get started Hilti will listen unlike Milwaukee . Got idea call Hilti everyone

You've got to get a VC 150-10 XE in house the gen 2 one...holy crap this things good better then festool.

У Хилти появилась торцовка 👍👍👍

All I'm interested in knowing is how accurate this saw is. Does the cut drift the more it slide out? Are the detents metal or are they using plastic

Everyone needs to set up their game with stands should be on wheels and should have wings that can attach to the stand. We shouldn't have to buy a cut hub or a fastcap best fence for the saw it should be a option from the tool company

I’m interested to see how the Tracksaw Holds up.

A mi también me emociono mucho ver una máquina de estas , pero de hilti, ya quiero ver las reviws Me gustaría que viniera para 120v y en 2 tonos el color

What about the crown cut? Does it have a holding hole?

Im excited about that saw. Great video Concord. I will be buying that next year.

My Makita fence 'clips down' too

Here's what I want in a miter saw. 1. 10" - 7.25" Won't cut thick material, 12" is too heavy. 2. Forward rails - Super important when using in a shop 3. AC/DC - Seems like a no brainer 4. Light weight but sturdy 5. Eliminate nooks and cranies - Smooth surfaces to adjust easy and easy to clean.

Dude that looks killer. Why would they tease it so early.

12" balde machine At 60 pounds is pretty portable it weighs just as much as my makita 10 inch 40v miter saw and I take that shit everywhere. Not bad

Couple of things festool has a speed dial and is that a bosh in red with a couple of changes of handles ?

Not up against a wall when Dust Collection comes out the back like that!

Will it have a corded plug?

End of 2024….wow!

Can you cut steel with it?

Será que vai vende essa serra esquadria a cabo ? Essa serra é quanto custa?

Thanks for taking the time to film! But what's going on here, showing a saw to the public that won't be available to purchase for 12 months? Is this nuts or what? Thumbs up.

Hilti $$$$$$$$ Wish I was a pro to justify it like the kapex

I Wish they would also make a 8 or 10” version

Is it for sale yet , can't find it on the net ?

Variable speed has been around for years, especially on the DeWalt… yes great, you can push it right up against the wall but look where the extraction outlet is!!!

If this gets the same 20 year warranty as their other tools its going to be a strong consideration for me even with the prospect of buying new batteries. Cordless 12 saws take a beating with starting that big blade.

almost looks like a combo of bosch and makita

12”!

I have the 10" Milwaukee, but this looks like it's in a different league

I agree about heavy tools. I'm in my 50's and that does not look portable to me. I like my cordless 8 1/2' Makita.

Come on Hilti get with the times, use a vertical handle for easy both hands operation!

This is pretty much a red makita clone. @rob, the bosch surgeon has various speed settings

better than delta arm design

Just following after Makita I see. A red version In all seriousness the Bosch 18v profactor surgeon has adjustable speed

To be honest it looks like they took a Makita 12" miter saw and painted red. This looks almost exactly like my Makita 36v 12" miter saw the back fence pieces even clip between the deck extentions exactly like this does only different I see is the variable speed option and color.

Braden!

Makita LS002. Can't give my cordless mitre enough praise. This does look interesting in a full sized mitre saw option though.

looks like a Red Makita

Agreed.

its the GCM 12" 18V SDE Bosch never gave us

Cuál es el precio ?

Seems like this machine has the same design like the Makita machines 2x18v

Someone can tell me the price of this ?

Looks nice but too much red lol

who knows when is this saw coming out?

😎⚒️😎⚒️😎

This could be a shop saw. 2024 is a long ways away, though.

still miles behind festool kapex

Did he say about $500?

Makita ?

I wonder how much they are paying makita for copying a bunch of stuff. The bevel lock looks cool, but I wonder how tight it locks it. We all know bevel wants to get freaky sometimes. The thing that sold me on the 40v makita 12 inch, is the combination of AWS, shadow line, and bevel smoothness and ease of use. Makita really knocked or out of the park with soft start and stop too.

너무커서 이동이 불편할것 같습니다. 타사대비 가격과 부피가 힐티는 아쉽습니다.

I have to say - I don’t think anyone makes a stand that transports well - none of them hang on the wall well, side in the truck or van well, fold up without being flipped a few times, have extensions that fold up out of the way for transport etc - if someone would just put the same amount of design into the stand as they do the saw I would pay for it even if it cost more than the saw. I have tried the Bosch - it’s better than most but not really compact

That's a makita saw in red

With Hilti, the "hi-hundreds" means a thousand. The stand is a clunky saw horse compared to the Ridgid fold-out stand. Ryobi does a better job. The saw looks nice but there are much better products for less cash. Hilti has good products but is being left behind in the price vs value. 40 years ago they had the roto-hammer market that time has passed.

It would be better if you find another time to shoot the video. The sound of the saw running in the background is super annoying. But thanks

Did hilti fire the whole engineering department? Copying makita and mirka , what's next going after festool?😂

To hell with taking the saw off the stand and have to carry everything around! All other stands the saw stand collapses and you wheel it away like a dolly. I can’t believe as high priced as hilly stuff is they have a prehistoric stand!!!,

Way too much red

Nothing portable about any 12'' miter saw . Portable is a Makita 8 1/2'' cordless 40v miter saw.

They seem to have copied the new Makita design.

Its a Makita 1219 LX for triple price... Hilti - nothing special;)

Well. We figured already you were not inclined to move such a saw everyday on a job site. Guess what ? I'm not either !!!! Age is a thing clearly.

Small, lightweight compact mitre saws are where it is at these days, no one wants these old dinosaws...

Hilti tools are trash, sent brand new impact drivers back multiple times, cordless circular saw got dropped from waist high and the plate bent, lazer level is temperamental, thank god someone broke into my van and stole this garbage. Insurance paid for my dewalt tools, and I haven't looked back since

Used to think hilti was boss, but that saw stand looks beyond cheap and crap.

Looks like Hilti are starting to make tools for the sake of making tools now. No innovation in the saw or stand. I’ve got lots of Hilti and lots of festool. I wouldn’t buy this saw.

Saw looks good, but Stand is absolutely trash though.

Lots of janky non sense going on , shit carry handle remove the fence like who does that