You, my man, are a life saver, I got the part online and with the help of your video, I installed the part and the task was so much easier, thanks a lot! 😊
@carfanfanКүн бұрын
Glad you got it sorted ☺
@marcgoodwin28495 ай бұрын
Had this problem. Followed your instructions. Now working perfectly. 💪
@samu1238Ай бұрын
You are a Godsent! Just fixed mine following your instructions! Thanks!
@devaplan3 жыл бұрын
Hi Hilton The screen went black yesterday in my 2013 XF and I was very grateful for your video which quite rightly identified the issue and saved me a lot of money and inconvenience taking it to my Jaguar dealer in Liverpool ( Hatfields) I picked up the new loom from Hatfields that afternoon for £48 ( It was in stock) and I ordered some (Metal) trim clip removal tools from Ebay and did the job this afternoon. It went very smoothly thanks to your video. A couple of tips Firstly I took the opportunity to make sure all the wiring running across the boot ( Trunk) lid etc was securely fixed using extra cable ties and duct tape to ensure it did not rattle. Secondly, when the trim clips with the central screws are removed they tend not to tighten up very well when you replace them. I found that using slightly thicker self tapping screws ensured that they were as tight as possible. Great stuff Hilton Steve
@carfanfan3 жыл бұрын
Glad you came right Steve and thanks for the tips. It helps the community 👍😊
@jameskirwin14272 жыл бұрын
Had intermittent blank screen, 2013 XF with 100K miles... Finally went out all together, Found this video, bought a new loom ($100) took 30 minutes to replace... works no problem so far. Thank you for taking the time to show me how to replace it (especially taking time and close up video of how those dang clips work, every car has so many different clips it takes so long to figure it out on my own.. and so many other videos they just say "unclip" and move along....Good job
@user-lx7ko2gs9tАй бұрын
Great video. Well explained and easy to follow. Thanks
@theflyingboxcar4804 Жыл бұрын
You're the best! I'm very handy with a wrench, but my '15 XF 5.0 Supercharged always intimidates me. Every time I have a question, a problem or want to explore a new project, you have a video! I've watched a lot of youtube vids and I have to say, you're killing it! Perfect sound, shots, details and length! Thank you times a million from California!!!
@HuebietheGuru2 жыл бұрын
Dude, thank you so much. I was about to buy a new camera. But when you said this is a fiber optic cable it comes lika a thunder in my head, that the opening and closing of the trunk might have break the cable due to the bending amount constraints over the time. My cat has 240.000 km now ;) Thank you so much! Cheers. 🙂
@robthompson5495 Жыл бұрын
Great how to video. I used it to help me fix my XF boot/trunk not opening. Made the job very straightforward. Thanks
@DiecastPowderCoating3 жыл бұрын
Thanks for another great video Hilton. I have the pre face-lift model, but I'm sure it would be probably similar. Touch wood I have got that problem YET, but great to know anyway. Take care, Jeff
@LisaRogerC3 жыл бұрын
Thanks Hilton, your videos are always informative and great 👍 . Roger
@carfanfan3 жыл бұрын
Thanks Roger. Happy Thanksgiving 😉
@bigtimemikey3 жыл бұрын
Legend, thanks for that my camera just stopped working, and now shown me how easily to fix it.
@carfanfan3 жыл бұрын
You're welcome. I'm glad my video could help someone out there. That's why I make them ;)
@philipjohn41493 жыл бұрын
Very good. I had same issue. I did not check the price here in Canada. A jag mechanic said it was more like 400. So I spliced all the wires myself. I believe the camera is coaxial. And the colour will come back with using a shield. So I first slid on small pipe and a heat shrink. Then I slpiced copper line and original shielding slid over the heat shrink. After shrunk slide over small pipe. Then electrical tape. Worked. It's clear enough and colour.
@carfanfan3 жыл бұрын
The older XF's might use coaxial. However, mine uses a CAT5 fiber optic wire which isn't repairable. This is why I wasn't sure about whether this harness will work on the old shape XF. Jaguar used fiber optics for various other items in the car as well due to their speed which communicated with the car's canbus. I should have broken the old cable up to show everyone what it looks like.
@gillouauto41312 ай бұрын
Ça n’a pas marché pour moi
@philipjohn41492 ай бұрын
You have to make sure to reconnect the original braided shielding
@garyfinnerty1628 Жыл бұрын
Thank you SO VERY MUCH for this video. Worked an absolute treat and saved me a fortune. I love my XF and with your help I'll be able to keep it on the road.
@Random_Videos2252 жыл бұрын
Thank you again mate! Mine stopped working just now and I went straight on KZfaq looking for you 🤣
@wyeviewjill1559 Жыл бұрын
Thank you so much for this video. The garage wanted £192 just for the diagnostic.
@dontuno3 жыл бұрын
Many thanks Hilton. A very well-timed video given I am going to try and retrofit a reverse camera. Must say you cleared up some confusion I had in regards the optical cable.
@carfanfan3 жыл бұрын
Glad I could help 😉
@gentlesoul15135 ай бұрын
Many thanks for taking the time to share, its very much appreciated.
@davelarcombe10562 жыл бұрын
Hi Hilton, just changed the harness. When I checked the old one, one of the wires had totally snapped and most of the rest were showing exposed copper. Once again, thanks for your help.
@carfanfanАй бұрын
This is what I'm trying to get across to those who say, just repair it. I could easily have repaired my loom but a few months later another wire would snap and I'd have to fix it again. It's not nice driving a car with the anxiety of what's going to go wrong next. If you replace the loom, you know it's good for another 10 years at least.
@JoePineappless3 жыл бұрын
Great video, yet another thing I can do, mind I would like to see more of what happened in the boot lol
@carfanfan3 жыл бұрын
Thanks Jeff. Yeah, it was too dark to film there but it's very easy to unplug the plugs 😉
@fishandreptileinfo Жыл бұрын
A very helpful video Hilton, Thank You.......Oh boy, I MISS YOU SO MUCH MATE. (UK)
@carfanfan Жыл бұрын
Thanks my friend. Unfortunately the hate I received from many viewers made me quit the channel. I'm glad my videos can at least help some people out there that really need it. Take care 🤗
@fishandreptileinfo Жыл бұрын
@CarFan Hilton Hilton, that makes me so sad to hear that. You are such a helpful and friendly chap too. I have had hate stuff in my past. I am the author of 3 books on keeping fish as a hobby, I joined a forum to help people. I just received abuse all the time. Just to end, I have watched all your videos and found you nothing but helpful. THANK YOU Regards Martin
@andrewsmith71263 жыл бұрын
All your vids are great mate, hope your safe and well. Will be in S.A IN august 2021 on vacation hopefully
@carfanfan3 жыл бұрын
Hey Andy. Hopefully SA has the vaccine by then. Apparently we're like last on the list while USA and Europe fight to get the lion's share. 😷
@ralphperez51123 жыл бұрын
Tanks amigo that's a good point to start on my plate ligts and camera tanks so much... i appreciate you videos
@carfanfan3 жыл бұрын
LoL. Yes the first things to go when this loom fails are either camera or license plate lights 😉🤣
@bonhoff673 жыл бұрын
Great video again. Always helpful.
@davefrance37213 жыл бұрын
This is another design fault that has persisted throughout the evolution of the XF that the customer ends up paying for. Did jaguar never think that people would never open and close the trunk. ? One fog lamp had stopped working in my XF. I traced the fault back to the loom. Luckily it was just a case of unplugging the loom and a squirt of WD 40 and plugging it back together again and that fixed the problem. 👍 My XF is now with another owner. It's relaibilty has been questionable to say the least. My Jaguar X type was totally reliable and only had a new battery and intercooler hose clip replaced during its 136000 miles.
@philipyim24462 жыл бұрын
Agreed I get frustrated as Jaguar engineers are weak that is why the company went under….
@pauljohnston7123 жыл бұрын
Not had this one yet despite running additional cables through that gaiter for a 360 camera system. I though that was fixed for the facelift cars but apparently not. I've seen other whe re wiring has stress fractured. It would make an interesting follow up video to do a post-mortem on the old cable.
@carfanfan3 жыл бұрын
Hey Paul. I threw the old cable away. Got to move on to the next thing on my XFR 😜
@nevillefletcher75183 жыл бұрын
Another great video thanks so much !!
@anthonyvening86423 жыл бұрын
Once again, a big thank you Hilton for a clear explanation of both the problem and the solution. So far, I've had no rear camera problem, but can rest easy on fixing it if it's a wiring fault. Do you have any plans for putting in some ambient lighting?
@carfanfan3 жыл бұрын
Ambient lighting? I sure do. I have everything already. Just need to find time to tackle it 😂
@adambaudelaire3365 Жыл бұрын
I'm getting feedback from suppliers now that the looms are no longer being made so I'm probably going to have to rebuild the loom myself. I'm wondering if the optical cable comes out of that housing at all. If so I can buy a standard cable and use those fittings.
@v88dicky323 жыл бұрын
Nice one Hilton 👍 We’ve had the camera go out on our XE S, so I’ll have to figure that one out now 😂
@carfanfan3 жыл бұрын
Probably the same loom that failed 😉
@mygodisable23 жыл бұрын
Thanks Hilton. As always great job
@carfanfan3 жыл бұрын
Thanks Debbs 🤗
@originalshadowfax2 жыл бұрын
Just a note, you need to check the part number against your particular model, in my case a 2011 XF-S and the part number is different to what you have quoted, for my vehicle it is C2Z19874
@carfanfan2 жыл бұрын
Yeah, judging by some of the nasty comments I received regarding the optic cable for the camera some are not fitted with one. My car has the auto close trunk latch so that could also be a specific cable.
@MrPatch253 жыл бұрын
Great video Hilton thanks
@yamilisantiago30143 жыл бұрын
Great video, my rear sensors recently stopped working please help me! Camera works fine it’s just the beeping that stopped how can I fix this? I called my Jaguar dealer and they’re saying it’ll be $250 just diagnose it! 😫
@carfanfan3 жыл бұрын
Put the car in reverse with the ignition on, but don't fire the engine. Then go round the back of the car and put your ear next to each of the four sensors along the bumper. You should hear a faint rapid clicking sound from each one. If only one sensor is down, the entire system fails.
@Warguy-uw6piАй бұрын
Hello CarFan Your video is perfectly clear, thank you for the explanations. The wiring harness in my car has the reference DX23-13A444-BA, do you think that the reference C2Z19978 replaces it? I'd like to take advantage of your expertise to ask you for 2 simple pieces of advice. How to check if the camera is working before changing the harness and how to dismantle it too. I have a faulty plate bulb, how can I change it too? Thank you in advance for all your answers.
@carfanfanАй бұрын
@Warguy-uw6pi unfortunately I don't know what that reference number means. I just know the part number which I used. The only way to know the camera isn't working is when the screen goes blank instead if giving you an image. The you know it's the cable. The camera rarely breaks. The license plate light bulb can be changed from outside the car. Just use a small flat head screw driver, insert it in the little slot on the lense and unclip it to reveal the bulb.
@frankguisnet960Ай бұрын
@@carfanfan Thanks tou very much !
@theadventurehoggs Жыл бұрын
Thank you, great videos. Now a question about the Sat-Nav....I have the 2011 facelift and i want to know.....how do i find out what version my maps are??? Thank you
@carfanfan Жыл бұрын
You have to go into the hidden menu. Someone posted a video on KZfaq a while ago on how to get in there. There is a code you must enter after pressing certain buttons on the center stack. Search for it on KZfaq and you should be able to find it.
@grootpret7 ай бұрын
Awesome great. What do you think the issue might be. My radio screen only flash on off with logo. Not working nor does my reverse cameras. Xf 2008
@carfanfan7 ай бұрын
It's most likely the screen
@DBCSgaming3 жыл бұрын
Just found the channel via this vid and love the content, I’ve got a 2014 XF R-Sport and both the camera and sensors have stopped working, would this fix the issue?
@carfanfan3 жыл бұрын
The camera yes, but I'm not sure about the sensors. It sounds like two separate buddies to me because they are not interlinked. The sensors will still work even if the camera stops working. It's possible you have one dead sensor and it's causing them all not to work. They run in sequence as far as wiring is concerned so it's probably the first sensor from the plug causing the rest to be dead too. Best to take the bumper off and check the wiring, if that's all good, check each sensor using a multi meter. Start with the first one closest to the plug as that will tell you a lot. 😉
@DBCSgaming3 жыл бұрын
@@carfanfan that’s brilliant thank you for replying and the advise, I’ll start looking
@philipyim24462 жыл бұрын
Thanks for the video the rip Off here is you only need the optical cable not the full loom….it’s over engineered the loom is causing stress on the optic cable that is why it breaks probably in the rigid loom itself.
@whiskybar2 жыл бұрын
Finally received the loom after a few months. The one for my 2008 Jag had to travel from Australia (I'm in Europe) it was sold out everywhere. Anyhow, that didn't fix it. What should I try replacing next?
@carfanfan2 жыл бұрын
Oh boy. It could be the camera itself, but uts rarely the case. It's usually the loom.
@whiskybar2 жыл бұрын
Interestingly, many people saw their loom wires broken/bent/destroyed... well, my old cable looks like new, no visible damage at all. Thanks for the advice anyway!
@iLoveTheseRemoras3 жыл бұрын
Is the optic cable the video signal carrier? 😮 I had no idea they are using this kind of solution in the wiring harnesses, and already almost 10 years ago!
@carfanfan3 жыл бұрын
Yip. That's correct. Many of the cables connecting to the canbus use fiber optic cables. VW and Audi have been using the same solution since the early 2000's.
@titosvip01253 жыл бұрын
I have a 2010 xfr . I wonder if this harness will fit my car.... and here in the US the dealer is asking me for 250$ 🤔
@carfanfan3 жыл бұрын
Holy hell! That's really expensive for that harness.
@titosvip01253 жыл бұрын
@@carfanfan Yes!! I went online to Jaguar UK and this exact harness you have goes for 65$ shipped to the U.S. I'm going to take my chances with this one....wish me luck!
@carfanfan3 жыл бұрын
@@titosvip0125 Good luck my friend. I'm sure it will work. 😉. Keep me updated when it comes. It will be very interesting to share with everyone else too 😊
@davefrance37213 жыл бұрын
Sounds about right. Jaguar UK dealers charge 325 UK pounds to supply and fit that harness. It's only a half hour job.
@davelarcombe10562 жыл бұрын
Hi Hilton. Just wondering, does this wiring loom also contain the wire for the boot release button? Boot still opens with the fob and interior button. Thanks Dave
@carfanfan2 жыл бұрын
Hey Dave, yes it does. Chances are that wire broke right in the kink of the bend of the loom. And chances are that if you have a backup camera, that too will stop working soon as the wires start to break one by one.
@davelarcombe10562 жыл бұрын
@@carfanfan Thanks Hilton, will get the loom ordered and get that sorted.
@inquisitive19112 жыл бұрын
Good video thanks. I have a Jaguar XE R-Sport, 65-reg, early 2016 model, with a reversing camera flashing on and off repeatedly when reversing. Took it into Jaguar (Scotland dealer) who advised £108 for wiring loom after paying £176 for a diagnosis. Then they said it needs a new camera at around £2000. - Can you believe that!?
@carfanfan2 жыл бұрын
Holy cow. Did you get it fixed? My guess is the loom.
@inquisitive19115 ай бұрын
@@carfanfanHi, no, still broken to date.
@stevenrees60153 жыл бұрын
Exelent money saving video
@gillouauto41312 ай бұрын
Je ne sais pas ce que vous voulez dire : pouvez vous me donner une explication plus approfondie s’il vous plaît.Merci
@davorgrgic9552 Жыл бұрын
Hi Hilton, could this also be a problem if both camera and sensors are not working?
@carfanfan Жыл бұрын
Nope. The camera will stop working the moment just one sensor stops working. Your camera is probably fine. Have the sensors checked to see which one is faulty. The moment you replace the faulty sensor, your camera will come back on.
@aceburly3 жыл бұрын
Yo can you help me Hilton, I just got my new LOOM part and switch out old LOOM like how you told us viewers to do & my screen still blue, any help ?
@carfanfan3 жыл бұрын
Hey, it's possible the new loom is faulty. I would exchange it for another and check to see if that fixes it. I know this is a dumb question, but are you sure you plugged it into the camera cable? It's easy to forget as one goes along. Are you licence plate and tail lights working?
@alexsuria59613 жыл бұрын
Hello the rear camera of my car works but it is seen with other colors sometimes you think that the wires could be broken Thanks
@carfanfan3 жыл бұрын
It's possible Alex. Usually they just stop working entirely. It's possible the camera itself is faulty tho
@abdullahsalim7992 жыл бұрын
Any suggestions? Or links I been looking for weeks online and can’t find the cable. I’m located in the U.S. thank u
@carfanfan2 жыл бұрын
I'm afraid its best to get this from the dealer. It won't be cheap, but it will last. If you get one from a salvage yard, chances are it will most likely fail soon any way.
@fikeibram8111 Жыл бұрын
Thenks bro
@mohammadanwari10143 жыл бұрын
Thank you very much for the informative video. I have same sort of problem with my xe rear camera. But on my car the camera wont stay stable and keeps swapping between camera and pdc!!! Do u think it helps if i change the loom? Tnx alot
@mohammadanwari10143 жыл бұрын
If u change the cable*
@carfanfan3 жыл бұрын
I don't think it's the cable on your XE. Possible the media system needs an update 😉
@BaybieK Жыл бұрын
Will the process be the same for the X260 I wonder...?
@carfanfan Жыл бұрын
Yup, it sure would. The X260 has the same setup. It wouldn't surprise me if the wires also break from bending the whole time.
@roronavarrete-obreque3978 Жыл бұрын
Hi, I bought a camera through ebay, it doesn't work, they tell me in good faith that it's good, what can I do to keep checking? My car Jaguar XF250 y 2015 thanks !
@carfanfan Жыл бұрын
I have had this quite a lot. People buy cameras for their Jags on eBay and it doesn't work. The camera is not the issue, the harness is. You need to replace the harness with a new one or salvage one and it will all work fine again.
@devilpepper40738 ай бұрын
I don't have any yellow guidelines on my screen when I put the car (2008 Jaguar XF) in reverse. Can this be an optional extra or there is something wrong with it?
@carfanfan8 ай бұрын
Older models didn't have that function. The lines were introduced from late 2010 only.
@devilpepper40738 ай бұрын
Thank you so much for clearing that up. 👍 I couldn't find anything about it.
@iamneo1690 Жыл бұрын
My reverse camera ain't working but also the parking sensors. Are the parking sensors anything to do with this wiring loom?
@carfanfan Жыл бұрын
No, they aren't, but they are linked to the same canbus. If one parking sensor is faulty, your camera won't work. Locate and replace the sensor, and your camera will work again. Dumb way for Jag to have designed it, but there you are.
@iamneo1690 Жыл бұрын
@@carfanfan Really appreciate your feedback Hilton. I'm determined to fix this myself!
@darkomiljackimatak90183 жыл бұрын
What is the display model in the car? I currently have no navigation and an older look. Thank you
@carfanfan3 жыл бұрын
Not sure what you mean by display model.
@shyamkrishan92063 жыл бұрын
Very helpful thank you 🙏
@xl1200r3 жыл бұрын
My xfs is a 2011,I would think they would be the same,mines still okay,so time will tell...
@carfanfan3 жыл бұрын
Yeah it really depends on weather temp I think. Here in SA it's hot most of the time and wire becomes brittle faster. You probably still have a few years left on yours 😉
@robertcrossan85073 жыл бұрын
Hi hi have an xj 351, all at once my rear camera, front and rear sensors and blind spot monitoring system have stopped working, can it be the loom, many thanks
@carfanfan3 жыл бұрын
Hey Rob - usually if the rear camera stops working, the sensors will still continue to work. However, if one of the rear parking sensors becomes faulty, this could affect your BSM. The camera loom in the trunk like the one I replaced is not mutually connected to the blind spot or parking sensors system - this will not cause your sensors to stop working. This might help topix.jaguar.jlrext.com/topix/service/procedure/435621/PDF/5306a1f4-f179-48ad-a354-87671f250930/en_GB
@robertcrossan85073 жыл бұрын
@@carfanfan thanks for that, I had the car resprayed a year ago and had warning lights and messages saying parking sensors not working camera not working etc, but it was just a plug not connected properly, when fixed all messages disappeared, but now only message is bsm not available, looks like a trip to dealer,
@carfanfan3 жыл бұрын
@@robertcrossan8507 my guess is a plug to one of your parking sensors has become dislodged or the wire has broken to it. 😉
@robertcrossan85073 жыл бұрын
@@carfanfan thanks Hilton I will get it checked
@christianbottelbergs382511 ай бұрын
Hi all. My camera shows the image from outside but after a second or so the screen turns black and I get a message I have to contact the dealer. I already changed the Radio-DVD-CD module. the rear camera and the cables at the trunk. Screen works for all other programs as radio, CD, DVD, home ... .
@carfanfan11 ай бұрын
Have your parking sensors checked. A faulty parking sensor will cause the camera to do that.
@christianbottelbergs382511 ай бұрын
Ok, I will, thanks a lot!@@carfanfan
@ajareseldejebiga3 жыл бұрын
What are the chances that my camera gets bluescreen 4 days before you post this video :D (2011 XF) Now just to check for the right part nummber for my cat..
@carfanfan3 жыл бұрын
Wow! Looks like our 2011 Jags synchronized their camera failure. Perhaps they conspired 😂. Hope the video helps make it easy for you to fix. You won't believe what the dealer wanted to charge in labor to do the job.
@ajareseldejebiga3 жыл бұрын
@@carfanfan oh, but i would. My Jag shop here in germany wants 140 EUR for that cable alone.. ordered from UK Jag dealer for 40 Pounds :D
@carfanfan3 жыл бұрын
@@ajareseldejebiga holy hell. I wonder why USA and Europe charge so much for this cable. It's around 40 pounds here too in South Africa. They still have 3 in stock so it will at least help others in the mean time.
@poorboymechanic5280 Жыл бұрын
I also have a pre-facelift car like you. Was the part number the same as stated in this video for the facelift model i.e. C2Z19978 (fibre optic) or, was your pre-facelift a different part number? Thank you.
@ajareseldejebiga Жыл бұрын
@@poorboymechanic5280 There is no fiber optic in my cable, i was wrong. In the end i resoldered the wires and fix the issue. Works 2 years now..
@fabiop76522 жыл бұрын
Thank you !!!
@SomethingNew212 жыл бұрын
how do u buy this from romania?
@JustCrusher Жыл бұрын
Hello, do I have to Disconnect the battery before doing this?
@carfanfan Жыл бұрын
Nope. Just replace the loom. The car isn't on or in reverse so the wires are pretty much dead.
@JustCrusher Жыл бұрын
@@carfanfan thank you so much. Your videos helped me a lot since I own my dream car for 3 months. 🚗💨
@Billionaire_99_3 жыл бұрын
Hey Hilton do you know how I can remove the chrome trim on a prefacelift XF? Cheers
@carfanfan3 жыл бұрын
Hey Marius - are you referring to the window chrome or the trunk chrome? The window chrome can be removed by opening the door, in the door jab just where the chrome meets the end of the door, there is a grommet that must be removed, there's a screw in there. Once that screw is removed, you can maneuver the chrome off - but you must also first remove the side mirror on both front doors - the door card must come off to do that and you will then have access to the side mirror bolts, undo them and the loom plug and you good to go.
@Billionaire_99_3 жыл бұрын
@@carfanfan I refer to the trunk chrome stripe
@user-vd5fm7ym5k Жыл бұрын
When i changed it i used new loom wire but after that my car number plate bulb continuously shining what should i do ? @carFan
@carfanfan Жыл бұрын
I'd say your loom is faulty. Exchange it for another. Your license plate lights shouldn't be blowing like that.
@user-vd5fm7ym5k Жыл бұрын
@@carfanfan i am in canada I ordered it from London Now i have to see what can i do with it
@user-vd5fm7ym5k Жыл бұрын
Can i just remove number plate bulb and use it for camera and other lights when they will send me new i will put bulb again ?
@user-vd5fm7ym5k Жыл бұрын
@@carfanfan if i remove bulb and power can stay in wires is that okk for car or does it effect or cause of fire ?
@carfanfan Жыл бұрын
@user-vd5fm7ym5k if you constantly have power goingbtonthe socket the wires will get hot and eventually overheat and potentially cause a fire. There is a short circuit in that loom, which causes the light to stay on all the time. Short circuits cause fires, plain and simple. I would change that loom for a new one. It's defective. Sounds to me like the wires inside the loom have a positive permanently touching another positive, which is causing the short. I wouldn't yake the chance unless you want the car to burn out due to being problematic and want the insurance to pay out for a replacement 😊
@aceburly3 жыл бұрын
What yr is that Jaguar, would the same part fit for a 2011 Jaguar XF
@carfanfan3 жыл бұрын
Mine is a facelifted 2011 model. I believe the same part will fit your car if it is the pre-facelift model. I checked my dealer after filming this video and they said it's used for all the XF's that are X250.
@cathymanansala73523 жыл бұрын
great video.
@danielioanspatacian87783 жыл бұрын
Hi. Where did you buy the new one? Thanks
@carfanfan3 жыл бұрын
Hey Daniel - I bought it at Jaguar. It wasn't very expensive considering the complexity of the loom and it's better to replace it with a brand new one so that you know it will last many more years to come. My camera has worked faultlessly since replacing this loom ;)
@danielioanspatacian87783 жыл бұрын
@@carfanfan Thank you 🍻
@baggwell12 жыл бұрын
Good video 👍 but I think the wire can be repaired :)
@carfanfanАй бұрын
You can repair it but the other wires in the loom will also fail soon. It's just better to replace the loom. Cadillac CTS has the exact same issue. Parts supplied by the same manufacturer for both Cadillac and Jaguar at the time.
@nzsingh73 жыл бұрын
Hi what this part called
@carfanfan3 жыл бұрын
It's called a loom.
@MrFabeRick3 жыл бұрын
👍👍👍
@markjagus5202 Жыл бұрын
Sadly this hasn’t worked on mine, any suggestions?
@carfanfan Жыл бұрын
One of your parking sensors could be faulty. Plug an OBDII into the car and run a scan. If one of the sensors doesn't work properly the camera will not work. If not a sensor then the actual camera is faulty. I'd just get a 2nd hand one.
@markjagus5202 Жыл бұрын
@@carfanfan I’ll try this. Camera often comes on for a couple of secs then it shuts off, so probably camera is ok and hopefully one of the sensors is the problem?
@carfanfan Жыл бұрын
@@markjagus5202 when I took my XFRs bumper off my camera wouldn't work because the sensors were all unplugged. Came back on again when I put everything back together. It stored fault codes for when I had the sensors unplugged.
@markjagus5202 Жыл бұрын
Hi. I have just sprayed all my sensors with WD40, and did round my camera for good measure. OMG it all works!
@carfanfan Жыл бұрын
@@markjagus5202 good to hear Mark. Glad you got it fixed again 👍😊
@popdaykin2 жыл бұрын
everybody says blue screen broken boot harness no not mine water damage blue screen simptons
@carfanfan2 жыл бұрын
Thanks for sharing. That will be very helpful to many coming to this video for the same reason. I've had some guys saying they replaced the harness and still blue screen, so perhaps water was the problem there too.