plz subscribe to support this channel: www.paypal.com... ship your item for repair: youness faiz 12911 sarah ln largo fl 33773
Пікірлер: 40
@ricoreyes6044 Жыл бұрын
Nice economical repair, isolating and replacing the single LED rather than the whole array.
@adamt78952 жыл бұрын
Thanks for the video, I learned new things about new TVs from it, and thanks to the good helping hands you get from that 🦁
@simo482520 күн бұрын
Good job Man , always great videos , tx Man
@Mark_from_IT Жыл бұрын
Watched your video, ordered the LED tester from Amazon, found that I only had 1 bad LED, ordered that replacement from EBay. $21.00 later (tester and new LED) and my TV is fixed!
@SOSfixElectronics Жыл бұрын
good job, did you replaced all strips? is better replacing them all and you dont have to take the tv apart again!
@forsale313 Жыл бұрын
Thank you for showing the proper way to test and match the (rouge) led bulb.
@AdeleTshebe2 ай бұрын
Good
@SweatyCubes9 ай бұрын
This is great! I have 2 of these TVs. One has bad capacitors which I can do. The other has bad LEDs like in the video but I don't think I'd be able to do all of this as I don't have the space or the experience for it sadly.
@judgederi401 Жыл бұрын
Great video. Thanks for showing us
@JoeCentralTech2 жыл бұрын
Like Always Good Work
@wisher21uk2 жыл бұрын
Never seen one like that yet thanks for the info
@SOSfixElectronics2 жыл бұрын
i did see the samsung and sony big tv glued screen but first time i faced other brand and smaller size screen glued on the top of the frim
@cosmicgeneАй бұрын
How long to cure the adhesive before using the TV?
@wehbeck2 жыл бұрын
WOW, we need you in Germany to Repair Electronics. Please use a better Camera for Videos. I Love how you Teach this Boy / Son.
@SOSfixElectronics2 жыл бұрын
yes i should
@afrarsuhairdeen432 Жыл бұрын
Hi, great video. Need some advice what did you use to cut the screen away from the frame? And also what glue did you use to stick the screen back on?
@SOSfixElectronics Жыл бұрын
plastic card glue b7000
@dominic24332 Жыл бұрын
Hi , i have the same problem my led is dead, where can i purchase a new strip
@electronicrepairservice20202 жыл бұрын
Right to repair?? ... wow, they're really trying to discourage people by making it harder to do it or more labor intensive for the same reason, they know time is money. Nicely done and thanks for showing us what these guys are up to. Next they'll all be doing it, no more screws, no more plastic clips, just glue it! 🙄 Higher risk screen removal - more liability. 😖 Does it pay to try and soften the glue with a hair dryer as you go, would doing it that way lessen the risk of cracking the panel?
@SOSfixElectronics2 жыл бұрын
you right bro. warming up the screen makes the adhesive more easy to go, but this screen it has a plastic gray film on the top may have discoloring if it wormed more then it should. those companies wants us to close. the customer knows about this risk he said it worth to try :D i love the understanding customers
@sophisticatedcheese75857 ай бұрын
Would applying thermal paste underneath the led strip help prevent it from burning out?
@SOSfixElectronics7 ай бұрын
yes or thermal adhesive
@dallasbiggz70074 ай бұрын
If you know it's backlight from the start, can you juat go in from the front without removing screws on the back?
@dallasbiggz70074 ай бұрын
Do you have to disconnect ribbon cables from screen?
@SOSfixElectronics4 ай бұрын
yes you do
@kingcobraking3495 Жыл бұрын
Is the t7000 easy to remove compared with the foam adhesive that comes from the factory? In case the tv comes back for repair?
@SOSfixElectronics Жыл бұрын
yes, usually the new leds will last long
@kingcobraking3495 Жыл бұрын
@@SOSfixElectronics thanks again sir.
@dominic24332 Жыл бұрын
Or how do i change that small led light or where i could purchase it and do u have a video that show how to replace s burn led ??
@SOSfixElectronics Жыл бұрын
ebay have them now, yes i do have a video
@capino73982 жыл бұрын
Did you use a Plastic credit card or something else? What liquid or chemical did you use to ease the glue and facilitate the separation of the screen?
@SOSfixElectronics2 жыл бұрын
The adhesive is easy to separate. Use a plastic card or a cut a piece from a soda bottle. I use the alcohol for a strong adhesive
@luisanaluisa30002 жыл бұрын
Thanks for this video. Do you know if the tu7000 glue is still holding the screen in place? Is this glue reliable or should double sided tape recommended as a better option? Thank you and keep it up the good work.
@SOSfixElectronics2 жыл бұрын
The adhesive glue is strong and works good for the glass and metal. The double side tape will works too just need to remove the the old adhesive first.
@SweatyCubes9 ай бұрын
So you use glue b7000 when putting the screen back on but what do you use with the plastic card around the edges when you're taking it off?
@balyemez94899 ай бұрын
Should be alcohol, it dissolves the glue.
@SweatyCubes9 ай бұрын
You mean like Isopropyl alcohol?@@balyemez9489
@capino73982 жыл бұрын
Pleas would you tell what kind of blade did you use to separate the screen ?