Hisense TV Backlight Causes TV Not To Turn On, Standby light Flashing (2 or 3 Times). R61G Series

Рет қаралды 6,584

10 ай бұрын

This video goes through a process of fixing a Hisense TV (58R6009) that does not switch on but has a blinking/Flashing standby light. The standby light Flashes 2 times continuously. This could be applicable for other Hisense models. Please note that this video is for educational purposes only, and is not guaranteed to solve your issues. Extreme care should be taken when dealing with electronics. All repairs should be taken at one's own risk.
0:05 Intro
01:33 Diagnosing Issue
02:36 Disassembly
06:35 Removing the screen panel
12:57 Testing Backlight
16:09 Changing Backlight
21:40 Assembling TV
25:20 Conclusion
Basic equipment required is a multimeter and a LED backlight tester. Panel suction caps are also recommended for removing the panel, and LED Strips. All these parts and equipment are very affordable, and can be ordered from Amazon, Ebay or Aliexpress.

Пікірлер: 22

@vickyd8831 8 ай бұрын

Thank you so much, you have been very helpful.

@GidFix-pl3lg 8 ай бұрын

I'm so glad!

@BikashMagar-jb4em 9 ай бұрын

👍 nice❤❤

@lawalsunday1420 6 ай бұрын

Good job you

@GidFix-pl3lg 6 ай бұрын

Thank you.

@bertha4085 10 ай бұрын

Another awesome opportunity to learn a thing or two☺️ please do you fix other gadgets too? Phones, laptops etc

@GidFix-pl3lg 10 ай бұрын

I fix whatever I can find. Look out for other fixes. 😊

@bertha4085 10 ай бұрын

@@GidFix-pl3lg I surely will.😊 Thanks 👍

@wadoodmohd1870 7 ай бұрын

i have black screen for ChiQ u75 g8 and i like to change all LED strip ca i use any led strip as the same size foe any TV

@GidFix-pl3lg 7 ай бұрын

No please. You have to buy according to the model number or part number. I will suggest you disassemble the tv and remove one of the led strips to check the part number.

@murrayflewelling1258 8 ай бұрын

I have a 55 inch with flashing light and you can barely see the Hisense cycle in the background....How much do the strips cost and where can I get them?....I do have the suction cups already but might look for a tester if you have a recommended source for that as well ?....What does a tester run cost wise ?...Thank you for the great video !

@GidFix-pl3lg 8 ай бұрын

Hi, i got the backlight from ebay for about $25. It may be lesser for a 55" tv. I would recommend you get one of your backlight strips and order using the part number. I just went ahead and ordered using the model number (not recommended though). You could get it from Aliexpress also for much cheaper. I find that the same sellers on Aliexpress are the ones on Ebay with higher pricing but faster shipping. But Aliexpress is also doing very well with shipping these days. I got the LED tester from Aliexpress for about $15. There are several of them on amazon as well with a slightly higher price. If you are not using for professional purposes, i would recommend getting a basic one for your job. Amazon is usually faster with shipping but if not really in a hurry, get it from Aliexpress for less and save. That LED tester is a great tool to have for the job. Hope this helps.

@teddydeda931 3 ай бұрын

How do u line up the new back lights after u remove the old ones . from east coast Canada good job thank you

@wadoodmohd1870 7 ай бұрын

how can i put the 3 filters in the same order to 75" tv

@GidFix-pl3lg 7 ай бұрын

Hi, i would suggest you get a partner to help you. Also get a bigger work area and lift all the filters together at the same time to maintain the order. You will need very good suction cups for the led panel, with lots of care.

@vickyd8831 8 ай бұрын

Hello sir, when you tested the leds on minute 1:51 was the tv plugged in?

@GidFix-pl3lg 8 ай бұрын

Hi, No the tv was not plugged in. The LED tester generates its own voltage to test the backlight. However if you want to test the power for the LED on the power board, the tv has to be plugged in. In that case, a multimeter will be needed.

@teddydeda931 3 ай бұрын

How do u line up new lights

@GidFix-pl3lg 3 ай бұрын

Did you mean lining up new led strips to the TV or lining up individual led lights on a strip for soldering?

@GidFix-pl3lg 3 ай бұрын

Basically, it depends on the tv. You can look at the old led strip and see how they align before you take them off. Usually, I leave one of the old strips for my reference, and after I have lined up and connected at least two new strips, I take the last strip off. Just watch out for groove marks and screw holes that align with the led strip. Hope it helps.

@nimalperera5454 9 ай бұрын

In my TV, I replaced the back lights with new strips. But they do not light. Standby is working good. What could be the problem brother? Any help pls?

@GidFix-pl3lg 8 ай бұрын

Sorry for the late response. Did you test the new backlights before replacing them? Also, what happens now when you switch it on? Is it still blinking standby or you have image which is dark? Use a flashlight to check.

10:07

I fixed a broken 4K 55” TV with TAPE | How to fix a TV with a blank screen

FrugalRepair

Рет қаралды 3,2 МЛН