Which Facebook Group? 4-wheel steering will not be that easy since you cannot buy a complete front axle, but will have to buy all parts extra. Furthermore you'll have to remove or cut the truck bed, since servo on axle will hit (I did already test my servo on axle mount on rear axles).

@@donaldsneffe There was a group mentioned I think.

@@PuertoRicanPrepper Yes... I do not use FB a lot for RC (still am member of the "FMS FCX24 Mods & Fun" group, but rarely read). MiniRC Channel (YT) mentioned that someone on FB posted this solution. You will have to ask there which group it was.

Perfect, Thanks!

Thank you. There are versions without 2-speed (CR-18P) and versions with (CR-18P Evo) of CR-18P Rock Van and Trail-Hunter. So you can get Trail Hunter with and without.

Guess needs new calibration. Try new binding. All trims etc. zero, then switch on radion in binding mode, then switch on truck. in binding mode. Hope this solves the problem.

Yes, it does (the "old" FCX24 radio). This ESC: kzfaq.info/get/bejne/gdindKurl62vqHU.html www.banggood.com/2_7A-1S-Dual-Way-Micro-Brush-ESC-3_3-6V-Winch-Reversing-with-Overheat-Out-of-Control-Protection-for-DIY-RC-Model-p-1533777.html?p=6S2910081756201209IA&custlinkid=419729

@@donaldsneffe isn't this a link for the micro esc that didn't work for the winch?

@@colinkeierleber1097 Works... check 14 minutes... but not with thie FCX24 radio ;-) - the "other" ESC is the "super normal" red "China" ESC you can find everywhere... thought you know this anyway ;-) Under this video you'll find links: kzfaq.info/get/bejne/ZsqPirKh29XUmqc.html

@@donaldsneffe Ok. Thanks again!

Guess you'll have to make them. Do not know where to buy, I make my own wires, plugs from Ebay, Ali, Amazon, ...

Danke ✌🏼😎

Hi, yes I can. This is not possible because different type of ANT protocol. ANT protocol receivers and radios from Flysky will not bind to radios/receivers of FMS and Hobby Plus trucks (which come with Flyska ANT radios). Probably companies want this ... so that people spend more money.

@@donaldsneffe Thank you very much for your help. So now i must buy a new transmitter which is compatible with that 4 channel receiver fs-r4b. If you have any proposal that will be very helpful.

@@TasosX Any Flysky ANT radio, check flysky-cn.com - there you will find all. If you live in Europe, also the Reely Gen4 and the Absima CR7P will work (they are rebranded Flysky radios).

@@donaldsneffe Thank you for your super help my friend , I will go for Absima CR7P .

They need 2s, so if you have HV in your receiver, this should work (but you'll have to put red and black wire to the battery in of the ESC) - but with "normal" 5 - 6 V they will not work.

@@donaldsneffe I have the Absima Cr24 and that runs on 2s. So in theory should work right? Another option would be to connect this esc to the battery wires and use one battery to power both the main receiver and this esc, correct?

@@mikebairsoftadventures616 No - because receiver is powerd by the BEC of the ESC and not directly by battery. Normally 5, 5,5 or 6 V. Anyway, simply try - you cannot damage anything. Take the two battery wires of the ESC (red and black) and use those instead of black and red wire of the "servo plug". Yes, of course you can plug the ESC to the battery. How do you power up your ESC? With another ESC?

@@donaldsneffe stock electronics right now so battery straight to the receiver esc combo.

@@mikebairsoftadventures616 So 5.5 V out... (or is it 6 V - forgot). Do not think it will work, but simply try - but be careful, do not use the red and black wire of the servo plug, exchange those and use red and black of battery in of the ESC.