HOBBYWING - ESC Calibration and LED meanings

Рет қаралды 15,670

Жыл бұрын

Calibration processing. The "First" thing you should do when you install an ESC.
Also we show you what the , Lipo Cut Off, and No Signal LED errors will look like.
HOBBYWING Official KZfaq
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Twitter.com/Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB

Пікірлер: 16

@BenJamin-wl8ov 2 ай бұрын

What does it mean when it blinks red and green at the same time? I still have throttle and steer tho

@sreeragc9018 4 ай бұрын

Hello sir , What is the reason the LED blinking(Green) when the X6 plus motor testing condition,

@jeremybennett5547 4 ай бұрын

Any ideas on this, I calibrated the throttle like in this video (more than once even) and when I turn the car on it goes full reverse?

@leonnielsen2769 4 ай бұрын

Calibrated my Fusion SE 1800kv as per instructions (and episode 299) and yet ZERO forward nor reverse. Switch flashes green only no solid red. Any idea as to what has happened? Thanks 🙂

@LaserUnicorn_racing 9 ай бұрын

having issue on xr10 pro. slow red blink. no throttle. won’t connect to program box. won’t go into calibration when pressing button. was working previously, did no changes ,went to track and it was like this.

@HOBBYWINGOfficial 9 ай бұрын

Please shoot us an email - NorthAmerica@hobbywing.com and we'd be happy to assist directly. Thank you.

@HL-OOI 11 ай бұрын

What about esc goes into lvc mode on a full charge lihv battery after a few punches. Off/on the esc and it’s ok. Check the battery and it’s 4.3v/cell..

@S9RUT 11 ай бұрын

Voltage sag, check your pack condition. Or, it could be thinking that your (for example) 3s LiHV is actually a standard 4s LiPo. How many beeps when you turn it on?

@HL-OOI 11 ай бұрын

@@S9RUT 2 beeps as usual for 2s. Just go into lvc after few punches on the Th. off/on and esc worked as normal..I will try to plug in balance lead into a voltage meter and see which cell voltage drops during the initial punches..

@erkpryt9401 10 ай бұрын

Hello, sir. I'm from Indonesia. I want to ask, can the quicrun program card be used for ezrun type ESC? thx

@HOBBYWINGOfficial 10 ай бұрын

The EZRun Max series works with the LED, the LCD, or the OTA tuner. Please Email us for more info - NorthAmerica@hobbywing.com

@Klunklunklun 11 ай бұрын

Hey charley

@PXCURSOS 6 ай бұрын

help me please! I bought the hobbywing quickrun 120a version 1 esc I did the correct calibration, but the forward and backward acceleration commands are inverted! When I accelerate it goes backwards, and when I reverse it goes forwards! I already reversed the control but it didn't solve it! Even the reverse force is much stronger than the forward acceleration force! what could I do?

@fgarcia2277 6 ай бұрын

You can always switch 1 of the motor cables. I.e. blue one with yellow or orange to yellow. That changes the motor rotation.