hobbywing justock rotor swap

Рет қаралды 2,355

Жыл бұрын

hobbywing justock rotor replacement upgrade cheating follow up to the timing video. shows how they swap stators and how to fit new rotors..
i know you wanna call me a cheater but fact is i always have a soldering gun and motor analizer with me..i dont run these motors i do help people.. so just know if you get all internet gangster in comments...ill just laugh..

Пікірлер: 12

@johnbaxter1398 Жыл бұрын

Another reason I hate spec racing! I’ve seen the timing done before but I have never tried replacing rotors or cans.

@stevenlocke5445 7 ай бұрын

I feel the same way so many cheats out there i just got back into the hobby after 30 years out wish i didnt stock class means nothin in this hobby from tire warmers to battery warmers why cant we just drive have fun no 21.5 up against 17.5

@user-ks1nr6bf3m 6 ай бұрын

If you are doing a 13.5 to a 10.5 swap are you supposed to swap out the stater too or just the rotor?

@johnlopez6001 9 ай бұрын

Are you saying you can put 7.5 in a 13.5 can?

@wadedavis9344 9 ай бұрын

You can put whatever you want in it. But a lot of esc have motor limits. And there would be no denying that you are cheating then.....lol

@c4chassisworks 5 ай бұрын

I doubt Rotor Ron is taking these apart and doing these things....j/s.....pretty brave to make a claim like that without knowing.......

@wadedavis9344 5 ай бұрын

I have taken quiet a few apart. What do you think he calls the works? Then I've seen some of the worst performing that he list as top 10.

@c4chassisworks 5 ай бұрын

@@wadedavis9344 First thing.....I completely agree with what you are saying as far as this stuff being wrong. He doesnt offer "The Works" for the Justock motors, only a 10% dyno tested. I think, the motors he sells as 10% are just that, they are better performing...on the dyno.....They are at or above a certain level of resistance, timing, and symmetry(I think)....These motors you have taken apart....Are they directly from him? or from someone else who bought it from him????

@wadedavis9344 5 ай бұрын

@@c4chassisworks I have tested and taken over 20 of his apart. 3 straight from his shipping. 2 of them the timing was at 45 and 48. With a cheap ceramic bearing in front plate. All justock are at 39 to 41. With the majority dead on 40. His top 10 are no better than any you get straight from anywhere else. My whole point is stay out of spec racing. This isn't pointing at him. It's just a reference

@user-ks1nr6bf3m 6 ай бұрын

If you are doing a 13.5 to a 10.5 swap are you supposed to swap out the stater too or just the rotor?

@wadedavis9344 6 ай бұрын

The rotor is the same on all. The stator is where you get your turns.

@user-oh4no7sn9i Ай бұрын

What is part number for v10 rotor?