Hobie Outback Torqeedo Ultralight Installation //. Foot Control Steering

Рет қаралды 8,214

2 жыл бұрын

I visit ‪@oklahomakayak6984‬ to teach how to install the Torqeedo Ultralight 1103 on a ‪@HobieOfficial‬ Outback with the ‪@innovativesportsman4679‬ Foot Control Steering Kit. This long, detailed step by step video shows all the tricks, tools and parts to get this installation right.

Пікірлер: 21

@ironkayaker5682 2 жыл бұрын

Nice install! Real clean

@mikearcher6239 2 жыл бұрын

Great stuff as always Jeff!!! Dave Lindo is good people and I’m sure those young men are too! I deal with the OKC team and really appreciate all they do. Some day I will add a motor, but for now I still pedal.

@TheLittleStuff 2 жыл бұрын

I enjoyed the visit. Dave is good people for sure.

@bigguyinalittleboat7927 2 жыл бұрын

How do you only have 4700 subscribers? You should have 47k.

@TheLittleStuff 2 жыл бұрын

I don’t know.

@therivergiveth 2 жыл бұрын

Agreed. The ol' algorithm is a b*tch.

@zoommaster7253 2 жыл бұрын

I agree

@jessebiondi846 Жыл бұрын

Like the build. Looking to setup steering for my newport nk on my Outback. Just wondering if there is amble clearance between the foot steering and peddle drive?.. or does it get a bit tight if u have wide feet or boots on.. also how do u like the low mount for the controller?, any issues with taking spray or splash having it low down like that on a choppy day. Thanks in advance

@ledthrax 2 жыл бұрын

Great video and very informative Jeff! What is your experience with speeds between the 2019+ Outback vs a PA 12?

@TheLittleStuff 2 жыл бұрын

PA 12 is around 6.1 mph. The Outback tops out around 6.5. So does the PA 14.

@Flynfish 2 жыл бұрын

Use a straightened crappie jig to finish pulling the spectra line through. Just barely bend the tip. It will grab and pull it right out.

@TheLittleStuff 2 жыл бұрын

That’s awesome resourcefulness! I’ve also heard of folks using an air compressor to blast it through.

@Flynfish 2 жыл бұрын

@@TheLittleStuff I’ve been going through some of your videos trying to dial in my Torqeedo 1103 on my Feelfree Lure 13.5 and Moken 12.5. There has been a lot of trial and error.

@Flynfish 2 жыл бұрын

@@TheLittleStuff Matt Ball has been helping me too. I used his spacer idea.

@nohc8 Жыл бұрын

Is the 1103 a good choice over the 403 on the Outback?

@TheLittleStuff Жыл бұрын

The 1103 is the better choice for several reasons: top end speed, efficiency, quiet operation, immediate throttle response and durability.

@nohc8 Жыл бұрын

@@TheLittleStuff Thanks! I picked up an rvr119 bc of your videos and ordered an 1103 for it. Will be ordering a second 1103 for the Outback.

@donaldfroid7345 11 ай бұрын

Hello gentleman. I just bought and install the 403 on my outback today itself and on forward on maximun speed on test of course it shows E45 and of course it stops the motor in 3 second and I need to restart same. Any advise ?

@TheLittleStuff 11 ай бұрын

Please contact a Torqeedo Certified Service Technician. Here is a link that should help: www.torqeedo.com/us/en-us/service-center/service-and-repair.html

@donaldfroid7345 11 ай бұрын

@@TheLittleStuff Thank you really appreciate

@TheLittleStuff 11 ай бұрын

I can also help troubleshoot some. My number is 815-528-2007. But ultimately, it’s a service tech that will get you going again.