We are going back together and talking too much while we do its Thanks so much for all the support guys!!! Grab a shirt/hoodie/patch www.bunkerbranding.com/pages/...
Пікірлер: 75
@holdenbros9109 ай бұрын
Hey guys just a heads up, we drilled holes in the crossmember, but did not film it! Good lookin out guys! ❤
@robsdeviceunknown9 ай бұрын
Please atleast put drain holes in that trans mount. It's going to get packed with dirt and mud. Let it drain or it will be a rust bucket in a few years.
@holdenbros9109 ай бұрын
We drilled holes in it!
@davidball85 ай бұрын
Why not just box the whole mount?
@brianselt2919 ай бұрын
Great fab work…Trans brace needs a weep hole at least
@Chauc3r9 ай бұрын
I hope you are going to put a top on that crossmember so that it doesnt rust out from all of the water and debris that will get in it.
@30aught69 ай бұрын
Or at least drill drain holes
@sedrickwells85459 ай бұрын
Man I swear that's the biggest thing jumped out at me.
@holdenbros9109 ай бұрын
We drilled holes in it!
@BobbiDazzler6 ай бұрын
Loving this 20k down the drain series. You guys sure do things right. Soothes the OCD. Keep up the impeccable work!
@Gijeff699 ай бұрын
Speaking of Drains, you guys probably should put a couple in the crossmember you just made or it’s going to be full of mud in no time!
@dalegereaux18639 ай бұрын
Don't you just love it when you have to fix other people's sloppy work ? I was one job I never looked forward to. It was usually easier to just start over and do it right. Could show with explanations today. 👍
@andyt47959 ай бұрын
Bitchin! Thanks for dropping all the knowledge and the creeper skateboarding scene LMAO!
@MAGAMAN9 ай бұрын
Nice shop safety lesson.
@xcool71x9 ай бұрын
Poor Stephen bit it hard if that wasn't scripted then that was hilarious!! Another great educational funny video thanks guys
@stephenmiller62379 ай бұрын
I didn't know I wanted a Suburban with a Cummins, but the more I watch this...
@sedrickwells85459 ай бұрын
I had this model truck and now I want another one with a Cummins or DD
@builtbybo229 ай бұрын
Gonna be a wicked truck once you guys get done working your magic!! #BuiltByBo
@missingremote43889 ай бұрын
Awesome suburban 4X4
@andrewzach19219 ай бұрын
Comment for the algorithm, thanks for the video.
@Bearsnake_life9 ай бұрын
It was great meeting y’all this weekend. Don’t forget about Rumble. Hope to see y’all on there soon.
@isomer139 ай бұрын
Great episode. Thanks, guys.
@danielduncan68069 ай бұрын
Oh hoho! Look who's fancy, with his flare tool... LOL
@SNAKERADIOS9 ай бұрын
That was defiantly a Meth user who was bored and over zealous who made the exhaust lol. Wow man. Too funny. I feel bad for the owner of the truck. Ok guys keep killing it and never lift!!
@metalman0659 ай бұрын
Like the other fella said, Either put a few drain holes in it or finish boxing it in, it's an open cavity for mud/ dirt to fill up, stay wet and cause it to rust out over time. Just and Idea.
@timothylindsey90819 ай бұрын
Haha, I see that I've already been beaten to this comment, but that cross member needs to be capped and have weep holes! Haha, easy to say when you're not the one doing the fab work, I've just had that drilled into me in the mechanical engineering world!
@chadthompson6819 ай бұрын
Love you guys...from Demo!
@chadthompson6819 ай бұрын
Wish I could give you more than 1 👍
@berhorst599 ай бұрын
Before I started the video, I figured you were blessed with another job from Matt
@sethspiker9 ай бұрын
Mud and water is gonna sit in the cross member.
@someyoungguy69909 ай бұрын
I was thinking the same thing!
@mid-misage34169 ай бұрын
Was wondering if they were going to address that.
@user-xi7tf8je8l9 ай бұрын
They could weld like a 20 gauge sheet metal top on it to keep the nasty out. Not like they need additional strength, just a cover really.
@brettwalker60169 ай бұрын
Knowing them I would assume they’re accounting for that. Always good to comment though just in case.
@chrissheathewoodguy9 ай бұрын
one day getting a nice cnc machine I'm sure you would love to have.. I would want the top of the mounts capped so water and mud does not collect in them and rust out..
@keithreilly3869 ай бұрын
You guys rock keep it up
@garymessina16099 ай бұрын
Great work great video thanks Willy and Steven and crew awesome job
@lordofpain34769 ай бұрын
Whatever shop did the original work on that truck should close up and switch to making fertilizer , because everything that they do is shit . I have built better set ups in my backyard than they did , they are embarrassments to the automotive industry . Thank the Gods of Horsepower that there are still shops like Holden Brothers that do it right.
@jontruax17 ай бұрын
I'm enjoying watching this. Just curious as the bill on this. Id really love to have one built or build one myself. Lots of great info here. Thanks yall
@markroper92699 ай бұрын
Cool video!! Lots of talking! 😝
@heyletsplaythis9 ай бұрын
Watch some of muscle Rod shops, metal work, he can make the weld seem completely disappeared
@christopherwedemeyer29939 ай бұрын
Here's a 'mint fer yer 'rhythms....
@user-xi7tf8je8l9 ай бұрын
Never used Kotzur, but I’ve had good luck with Parks Engine Service in Seguin. They’re not fast either though, but the Cummins work they’ve done for me has been good.
@trevm36479 ай бұрын
As close as the oil pan is to the crossmember, with rubber deterioration and torque twist. Dont you need a little more gap?
@knighttaylor42729 ай бұрын
When Willie is doing the work and his bro holds the camera
@user-xi7tf8je8l9 ай бұрын
Why no muffler in the exhaust? Straight pipe 12 valves drone bad. Straight through mufflers help a lot with the drone and don’t create exhaust restrictions/ turbo spool issues like a chambered muffler.
@derek13p9 ай бұрын
Kotzur for the win!!
@justinbrown87599 ай бұрын
Keep the videos coming
@eddyquesnel60339 ай бұрын
I would be worried that it being open on top it would collect trash.
@BOBKB5RLJ9 ай бұрын
Put a drain hole or two or three or four in that transmission crossmember. I know you guys know better than that.😮
@SootyDiesel819 ай бұрын
Them side step mounts look a bit how ya going
@timothynaquin88999 ай бұрын
You need a white board for your "clear as mud" talks... Lol
@BrentTully-ct8hn9 ай бұрын
Hi
@jamesbromstead49499 ай бұрын
How about using a flop tube in the fuel tank?
@jonkillian94348 ай бұрын
I paid a shop to install a sump / Fass 165 on a 2g Cummins. They put it dang near the front of the tank. My driveyway is steep. Half tank minimum or your bleeding going out. Then you promoted a 3in exhaust. Shame
@thef1sh179 ай бұрын
mahle = mah lee, per the germans that work there
@SimonElenor9 ай бұрын
Get an ArcDroid!
@trxcummins73889 ай бұрын
Where was 20K down the drain part 1???
@desertvet19909 ай бұрын
Love your videos, but damn son, do you like to talk! Less words and more fabrication would make your channel a 1,000,000 subscriber channel
@hankclingingsmith87079 ай бұрын
Too much red bull
@tylerbarrett66529 ай бұрын
Okay... so I must have missed part 1... but here I am trying to figure out HOW you sent 20k down the drain - it all looks like legitimate expense to me.
@mid-misage34169 ай бұрын
Customer already dropped 20k for another shop to do the work, now Holden Bros are redoing everything that shop did.
@tylerbarrett66529 ай бұрын
OOOOhhhhh.... okay. Well now that makes sense. @mid-misage3416
@shelbyGT409 ай бұрын
...... where is part 1?………
@jontruax17 ай бұрын
Update?
@loophead6149 ай бұрын
Comment
@hankclingingsmith87079 ай бұрын
Can you please repeat again,again,again,again
@tobycatVA9 ай бұрын
I would've brought the exhaust out in front of the tires.
@tunesgarage9 ай бұрын
Why would you do that
@sictoday9 ай бұрын
22:52 gunna fill full of shit. Rust out. Only thing I see wrong with it.
@OjaiBonsai9 ай бұрын
I haven’t wanted to watch this episode because you said -20k
@staryder53299 ай бұрын
You explain things so many times it makes your videos really hard to follow. Show more, talk less!!!
@mrolsen69879 ай бұрын
Or you can turn the volume off..
@dan7259 ай бұрын
I love all the explanations though. I find it rather critical especially for exchanging of knowledge.