Yes valuable carb info from the man that breaks it down step by step with no bullshit. Hell yeah brother

Holley use to have lots of recommendations and tuning tips on their web site. Usually with a rebuild kit there are lots of little tips in the instructions as well. I've owned lots of Holleys and still have a whole shelf full of them. once you learn to tune them you won't want to run anything else.

Nice breakdown! Probably basic for most but eye opening for others (including myself) how important it is to get back to the basic settings

This channel is one of the best things to happen for classic car enthusiasts.

Your one in a million that actually just gets down into information and showing the process. Not self glamorizing and posturing. Your awesome man hope this gets to help people

Boy I tell ya, Uncle Tony is the freakin MAN. Straight to the point, no b.s., and the Holley on my small block is running like it should all thanks to this man here. Thank you buddy!

You sir are a champion, solid information that is well explained, easy to follow along and no other BS. Very well done.

These videos are GOLD. Good luck finding a shop that can do carb work. Thank you UT…

UNCLE TONY! Please keep it going woth the holley! We need to learn whats the next step on tunimg these! AS ALWAYS GREAT JOB!

Just rebuild my first carburetor and used exactly the set up you said and it started up perfect. Thanks a ton!

We are spoiled rotten EFI! Tuning those carbs is an art form. Thanks Zio!

possibly the best tuning video I ve found so far, short, sweet and to the point. can't wait to get home now and tune the Holley! Thank you

Just stumbled on your channel a couple weeks ago and so glad I have. I have enjoyed your channel and info you are putting out. Keep up the great work!

HAPPY Thanksgiving Uncle Tony and family! 🇺🇸🙏 Best wishes, always. Thank you for all your sharing. ❤ We are so lucky to be living in a time that provides us with teachers like you. Much appreciation from CA.

Thank you!!! I obtained a 79 vette from a good friend on mine and it always ran way out of whack. I noted the original settings once you explained what everything was. I followed your steps and now it's running great! It used to misfire, choke on start ups, way too high idling while cold, etc. What a difference!

Love this carb video series. Really explains it and makes it so a shade tree like me can adjust the carb CORRECTLY!!!

WOW, Tony. Thanks a bunch for bringing back Fond memories. Of tuning and setting up the normal Holleys and the Double Pumpers. Had a Large double on my 350 Chevy small block. After getting it in place and bringing the fuel in right. Would take my truck around the block and after setting every thing just right. My Truck would dance! Foot off of the Gas. Almost dead stop, just rolling. Tap the Gas it would jump forward again! Any good music worked. LOL Any Long Highway or Freeway traveling. Just cut the Gas out until before dying. Back a touch, then adjust idle to lower rpms. Best way to get better MPG, and save cash too. There isn't any vehicle that you can't tune just right with those Hollys! Thanks again for the video. And it looks like you had Fun doing it too!

Thanks for this video. I just recently purchased an 83 Camaro Z28 that had been swapped with a SBC 350, and have spent the last 2 weeks rebuilding most of the mechanicals from the ground up, replacing what needed replaced. I have it moving down the road now, but it needs some tuning, it has some hesitation when the throttle is mashed but accelerates smoothly if I ease into the throttle. I've never tuned a carb, but this video makes me think I at least have a shot at it. Holley DP 4150 is what I am working with. Thanks again!

we used to rebuild these carbs 40 yrs ago when we had a fleet of 460 fords. you are spot on when it comes to the external adjustments. we were always replacing the 'power valve', usually a eng back fire would take it out... the problem we had was that very few guys knew how to rebuild them & set them up. an old school mech showed me how & it wasn't that bad once you rebuilt a couple of them.. i was glad when they sold off those 460 fords though!

I can't thank you enough for that video, you helped me alot with tuning and my carb myself and saved me time and money... i searched a lot about tuning holley carbs but all of them includes tools and gauges that I can't find any where around me...

Just finished my 302 install that I talked to you about on live stream once! It's bored out to a 312 that's why I called it that during the stream. I got the engine basically running but my timing is way off so after I get that I put a basic carb tune like the one you mentioned here on it. Thank you so much for many great years of expert advice! I wouldn't be in the place I am today without your guidance

Tony, I can't properly articulate how much I appreciate your channel. Thank you Sir!

Old school is the best school. Appreciate the breakdown. Got one these carbs for free for my 79 camaro project and used to using edelbrock. Surprisingly simpler than I thought they were

This is the go-to online manual to adjust a holley for sure! Great work Tony!

I can’t tell you enough how much I needed this video. I love these tech sessions.

fantastic video with clear and helpful instructions for those who want to learn about getting their car running smoothly.

Thank you. Been fighting my CJ7 Holley carb and you broke it down nice and easy. Appreciate the solid help.

Simple, basic & understandable explanation. Well done Uncle Tony. Cheers😊

Thanks U.T. Learned a lot there, I’m currently staring at the 2 bbl Holley that’s going on my 225 Buick. I’ve always had QJs or carters, with a little Weber mixed in. Thanks again! Will

I’m rebuilding my metered fuel leak this while my Mopar gets a break from constant burning tires this winter. This video is a huge help!

Uncle Tony, I enjoy the heck out of all your videos. Currently restoring a '72 Dart and a '78 Dodge Adventurer and your videos help me a lot. Really hoping you make the shirt "I am the computer!" I'll buy it!

Wow what a great video and explanation, for someone that really doesn’t know a thing about carburetors this video can really get them going. 🙏🏽

Thanks for the info!! Needed this quick step by step guide. Haven’t set up a carb in 10 years, didn’t know much then and I forgot everything lol

I bought a new Holley 2300 and installed on an AMC 304. I just didn't run right, so my son and I watched this video and followed the directions. Once we got to adjusting the idle jets it all felling place and everything runs great. thanks

Thanks Tony, you explained the process very well and easy for the ordinary guy to understand.

This is an informative video. Purchased a Holley 670 for my truck. Thanks for the help uncle Tony!

I love the Holley carburetors!!! Waiting to hear about fine tuning.

Bought a 350 Chevy with a Holley. Leaked; replaced it with an Edelbrock that was laying around, runs great. Hope to build the Holley soon but looks complicated with the different cams, other adjustments and jet sizes. Rebuilt a Quadra jet years ago and it worked very well.

Hey Uncle Tony, been having issues with my Holley 390 cfm on my checy 230 straight six. It ran like crap. Followed your tips and got to say the engine is smooth as silk now. Thank you sir.

Holleys are great for all the external adjustments that can be done, especially setting the float levels over other carburetors. But they are big with a tight fit in dual quads applications, can rupture the power valve easily during an induction backfire and have several places to leak. For all out performance they are top of the heap though.

This is the best walkthrough of one of these that I've seen so far. Thank you

This is one of the most informative videos Ive come across in a very long time. Thank you for taking the time to make this. Very helpful to me.

Uncle Tony is a natural speaker . Great explanation of carb tuning Uncle . Cheers

Interesting information Uncle Tony, although the Holley Manuals can be jam packed full of Carburettor goodness, they can be a little vague at times. Wholly, I think the eagerness young blokes can be at fault here wanting bolton power - fit and forget so to speak - and wonder why they run into trouble for rushing a job they needed to take their time with. I believe the mystery of Holley Carburettor tuning is solved, so it makes more sense now. I did see and read an article last year where a double pumper was modified for street/bracket racing for aesthetics, power, metering and airflow, which was very interesting indeed. Thankyou for sharing this, Cheers :-)

Great tutorial on how to adjust your Holley carburetor have a good day Tony and say hello to Aunt Kathy for me

That was great! Ill be working on my Holley tomorrow to see if I can ge the mixture right. Good work!

Thank you for not over complicating it like everybody else. Thank you for the knowledge

Your video helped me a lot on the Holley carb I bought for my 1980 460 Cu in Ford motor. Dying to put it on, thank you very much.

Tony, you are the king of "Keep It Simple Stupid." Best setup video for a carb I've ever seen.

I've never touched a Holley in my life. I'm no longer afraid. Look forward to learning more about them.

Lol I was just doing this yesterday on my old bronco, idle was too high. My idle screw were way out but I think I got it close. Thanks Tony keep sharing the knowledge!

Thanks so much for your videos. I greatly appreciate them! This seems to be an artform that this slowly disappearing. My girlfriend has her grandpas trucks (69' F-100) and it seems to start/crank just fine. We replaced the carb with a refurb'd motorcraft carb, since we couldn't get her accel. pump to stop leaking (even after a rebuild). It not longer leaks after the carb replacement, however the truck will crank, start and idle just fine- even without the use of the manual choke- but after it warms up (like driving to work), the truck will lose power and eventually stall. It won't run again until after a good 15 minutes or so have passed. We have spark- and the truck doesn't appear to respond to carb cleaner when sprayed. After it cools down though, it acts as if nothing has happened. I'm "new-aged" mechanically inclined- so I'm somewhat familiar with engines in general, but this whole carb thing fly's completely over my head. She wants to sell the truck- but it starts up and drives so good, that I believe that it's just a tuning issue- or something that happens AFTER the truck has warmed up, and goes away once cooled down a bit. Not sure why I'm writing this long post. I'll go back through from step one and see if I can't better describe the issue that we're witnessing and then report back. I'm sure we'll be referring to your videos until then. Thanks again for all your guidance. It's very much appreciate from keeping older vehicles from the yard. Joey

This video couldn't have come at a better time! I recently rebuilt a Holley 600 and installed it on my Dart's 318. It runs good, but I think with these tips, it can run even better. Thanks!👍😎

I had a tough time setting my idle mixture screws using a vacuum gauge because the cam I had at the time gave a choppy idle. My Dad came down for a visit and set them by ear. You guys are old Skool cool!!!

Thanks for the awesome tips! Your generosity of information is greatly appreciated.

Very well done, probably one of the best basic descriptions I have seen.

Spot-on carb setup tips! Follow these directions and you should have Fuel injection-like drivability and throttle response. Maybe not cold start perfection but damn near it.

Great refresher , as it's been , well lets just say I had hair way back then, in 1972, LOL and was tuning Rochester 4 Barrel carbs and some Holly's , Thanks for the video

Im an old muso and we tune guitars , Uncle Tony you have taught me the way ! great stuff !

thanks Tony. I have a built 302 with a Holley Avenger 570 and I just could not seem to get it idling right. this video helped me alot and it runs fine now

Thanks Tony! Reminded me of my old man teaching this stuff to me when I was a kid. Do it enough and you develop a “calibrated ear”.

Very informative! I've always played with Edelbrock carbs and needed the Holley basics for my new project. Thank you for the video.

Thank you so much for this video! I've been so intimidated to work on my Holley and the way you explained everything made it a snap even for an idiot like me :)

Thanks Uncle Tony . . . this is the best possible start up info. You're the greatest!!

Thank you for breaking it down! I just purchased an old square body Chevy truck that has one of these on it, and let's just say it is really out of whack right now. This will at least give me a starting point. Thanks again

Tony, locks eyes with Tom Hanks: I am the computer now.

Thanks Uncle Tony you have simplified the Process and made it very easy for me to dial in my Holley Carb you have given me the confidence and Knowledge I was after your Da Man and I mean that Sincerely it was a Pleasure watching your Video and Thank you Greatly Appreciated

Great video, probably the best I have come across on KZfaq. You should make it a series and get into the more advanced stuff small steps at a time.

I was looking all over for how to get back to the base settings after I changed heads. This would have saved a lot of trial and error. One thing that really helped get it running right was getting the transfer slots adjusted.

Thanks for the great video uncle Tony! I've never ran a Holley before, so this video will help big time.

I want some 5.0 tuning videos!! Great channel - love watching and I don't even have a carburetor car.

You are bringing back memories. Thanks tony.

People, usually under 40, ask me why I don't run EFI. I tell them you can't beat carbs for cost, ease of tuning and performance. Yes, it took me years to really fine tune my skills with carbs, but once you do then the cost and performance advantages really shine. Thanks for keeping the flame bright Uncle T!

Just got an 80 Camaro with a single feed Holley video was definitely helpful for understanding this a little better👍🏻

simple, fast, and to the point. you are a godsend

I get lots of laughter and smirks when I open my hood at the gas station with a screwdriver and vacuum guage in hand. Seems like I'm always searching for that perfect tune

Thanks...It's good to know what I was doing wrong..My buddy builds my engines and sets them up..I think I know what I am doing and mess the carbs up sometimes lol... Why I touch the carbs? They stand out and look neat!!! I am painting his 2011 Dodge Ram 4500 roll deck right now..I checked in for my business emails,calls etc this morning,and what do you know UNCLE TONY!!! Now I am running late,Thank-You!! No seriously Thank-You!!! I work for myself so no hurry,love the content! Can't wait for the 6 pack RamCharger!!!

Great timing; I just bought a 1969 Corvette project that, among other things, has a double pumper that needs tuning

thank you. ive always watched people do this and no one could explain it to me so this was helpful at learning how to do it.

just what i needed... 71 mustang 408 stroker, quickfuel SS 750 holley carb running rich and fouling plugs.. i will try to tune again before messing with internal jets, which I have never done, reco on the jets has been come down two step... i hope i don't have to do that after watching this video!! thanks, bro!!

You have to set all idle screws on the six pack I didn't know that 25 years ago had to get my dad to help back then very good info and a great channel thumbs up and subscribe

great info. Just reviewing as it is Spring, budget is tight, and trying to make sure my Edelbrock 1406 is dialed in, and timing is right on my '81 Dodge W250 ram w/ a 360la. New subscriber.

Best explanation of how to adjust a Holly carb on you tube. Thanks

Perfect Step one ! Now I want the step 2 and the advanced tuning for my 72 Satellite ! Keep goin' man, you're the best, i watch all your videos ! Greetings for you and uncle Katty ! Nico, from France.

Thank you so much for this video, providing your knowledge to others and sharing wisdom is the best thing you can do in life. I definitely learn so much I just hope I don’t screw mind up 😂. Thank you again ( 2023)

Thank you thank you thank you, I will be able to use this real soon when I finally get my engine swap done.

Thanks for this video! Best explanation and helpful info I've seen or heard yet! Definitely makes it easier to do and understand. Thanks again!

It was refreshing to see you using SAE wrenches. I used them on my '82 Dodge but that was decades ago. Everything in my yard these days is 99% metric. 2000 Ford van (Canadian built-the 99% metric), 2006 300 Semi-Hemi SRT8 and 2015 Hondu Civic. I can send you another set of SAE wrenches if you need them, I don't have much use for them anymore.

another great class from professor Tony!

Was always told when I was a young man, only 2 men and god knew how to tune holleys properly.........well I paid attention to the one man I knew and learned from him, but I think I just met the god lol. Great video Tony, you never disappoint!!!!

Who the hell put thumbs down an hour after it comes out? Not from the core fan base, obviously.

perfection , uncle tony is an amazing teacher

Absolutely great vid . Im in the uk and have a dodge d100 1971 , 318 v8 with holley carb same as the vid. The motor is burning oil pretty quick ( but no smoke coming from exhaust, even under load) It has a couple of oil leaks i need to address first, one of which is intake manifold gaskets. But these are only seeping/not dripping.. I also have oil coming out of the dipstick tube when pcv valve is fitted, if i remove and vent to atmosphere this doesn’t happen. ( was venting to atmosphere with pcv fitted anyway) It doesn’t struggle to start and even runs okay, smells like its running rich though . Never had anything like this car wise and worrying ive bought something that may need more work than i would have liked . 🤦🏻‍♂️

Incredible video my friend, I watched about 20 videos before I found yours and they all sucked, even one from jags. Thank you for explaining this. You’re the man

This has been an excellent series of tutorials. Even if you know most of the things covered it's still interesting... Thanks National Treasure... oh, and You too Tony...😄

I'm 19 and just bought a 79 ranchero gt 351m. It is my first car with a carb and I'm excited to to learn how to tune it

Best videos to watch I lov how you discuss and show in detail you hav helped out so much keep up the great videos 👍👌

Awesome video Uncle Tony! I love learning about classic car-related, as an apprentice mechanic now we never get to learn about these!

My relationship with holley carbs over the years can only be defined as "love hate"

Yo, Uncle Tony, this is awesome. I have a 750 double that I haven't put on the Cordoba yet because I haven't downloaded the manual (bought it used). It's like you have Faux Uncle ESP!!!!! Thanks for this and the slant six video (great tips for general valvetrain stuff in that video!!!!)