If I insert the sound mixer's audio, can individual users decide to listen or not listen to it? Or will all headsets be forced to hear it?
@darrensanchez8213Ай бұрын
question? it is possible to connect from m1 to S1? ASAP please. thank advance
@jasoncphotography2 жыл бұрын
Can two hubs be connected over a IP network with switches or does it have to be a direct ethernet cable?
@WarriorNetwork4 ай бұрын
Ever get an answer to this?
@justadudeontheinternet65015 күн бұрын
Same question...????
@productionbydesign449 Жыл бұрын
Hi, is it possibly to use a second hub in cascade mode as a range extender, rather than for the purpose of increasing the headset count? ie having one hub at Front of House in a venue and another back stage to provide venue wide coverage?
@travisjaymoore4 ай бұрын
I have this same question
@longbeach41d24 күн бұрын
there is an event that I need 22 pcs of wireless headset into ONLY ONE GROUP and need to feed in audio music to the intercom. how do I cascade TWO SOLIDCOM M1 and ONE SOLIDCOM C1 together and also feed in audio music at the same time?
@hollylandtech22 күн бұрын
hi please send us a DM on Facebook,so we can provide better help
@plnfacilities2 жыл бұрын
Is it correct that adding a hub at a later date to the kit renders the original headset master redundant?
@hollylandtech2 жыл бұрын
Yeah,you are right.👍
@dicky70974053 Жыл бұрын
Is it possibel to connect C1 Pro 6S with C1 Pro 8s without hub?
@ahmetbatuhankaradeniz5731 Жыл бұрын
How can buy it in Turkey? Thats product no have in Turkey.
@AltheTechTitan8 ай бұрын
Is it possible for the master headset to talk to A and B group simultaneously?
@hollylandtech8 ай бұрын
the group talking fuction only work in HUB version
@Naufal19971 Жыл бұрын
is it possible to connect 8 solidcom C1 without hub?
@tgj13132 жыл бұрын
So if you daisy chain the many hubs via the IP connection and not the 4W, we can have unlimited number of headsets? And does your headsets TALK A or TALK B key has the PTT mode or just latching mode?
@hollylandtech2 жыл бұрын
Hi, the Solidcom C1 also can can support 2 sets of IP cascading, with 4W interface, wireless sets can be cascaded. And it has latching mode.
@parhamshay5692 Жыл бұрын
is it possible to use a master as a slave remote, as in connect two master headsets togather?
@hollylandtech Жыл бұрын
No
@oudomsambatchorn851 Жыл бұрын
I already have 4 pair of solidcom c1, and looking to get another 4 pair. Do I need hub to do it?
@P2MediaLA3 ай бұрын
Anytime you're going above four units, you will need a hub.
@737gez Жыл бұрын
Hi folks, Can you tell me if the C1 Hub unit can : 1) integrate with an existing analogue wired intercom system? 2) can you feed an line level input back into the hub (eg commentary from a Audio mixer) 3) connect external antennas. Ie remove the ones that come with and able to put antenna outside an OB van ? Thanks in advance. Ps am a newbie for this kind of stuff.
@hollylandtech Жыл бұрын
Hi, there: 1. Solidcom C1 supports interconnection with the wired communication system, connected through 2W interface:hollyland-techhelp.zendesk.com/hc/en-us/articles/7270395774739-Interconnection-Solidcom-C1-Clearcom-702 2. You can input the music of the mixer through the PGM IN interface, or connect to the mixer through the 4W interface to convert XLR:hollyland-techhelp.zendesk.com/hc/en-us/articles/4413343184659-SOLIDCOM-M1-MIXER 3. Currently does not support connecting other external antennas
@DuffTV Жыл бұрын
@@hollylandtech Hi there, just in reference to question 1 from 737gez, I think what he means is if we have our own old wired intercom then can the C1 hub receive or send an audio signal to it. We don't want to have to buy the M1 system. We are keen on the C1 headsets and the Hub but want to be able to receive audio from either our old wired intercom and/or a normal audio mixer. Is there a video showing the rear of the C1 hub and how it works in this instance? Thanks
@judjohnson4640 Жыл бұрын
@@DuffTV You should be able to connect to another system either by 2-wire or 4-wire. It has i/o ports for both on the back of the base station
@yankeebinah Жыл бұрын
Missing how to connect a headset that is flashing green (not connecting to the hub)
@hollylandtech Жыл бұрын
Hold A on the master headset and hold A on the remote and they will pair after a few seconds! If you want to connect it to a Hub, connect it via a USB C cable, and it will pair!
@HBCUGameday Жыл бұрын
@@hollylandtech We purchased a hub and a set of slave headsets separately. The hub and headsets are both C1 models but will not pair via USB C cable at all. Any Suggestions?
@johanneslohmann8727 Жыл бұрын
@@HBCUGameday Did you solve the issue? Having the same problem
@MarkWhite19822 жыл бұрын
The Hub.. Can I have an XLR input from my mixer of the room audio be heard through the headsets? Easy enough to turn on and off? Im sick of wearing two headsets, 1 for comms, and the second to monitor audio for the live stream..
@hollylandtech2 жыл бұрын
Hi, there. Yes, sure you can combine 2 headsets into 1 by PGM IN which can connect to Mixer
@MarkWhite19822 жыл бұрын
@@hollylandtech Thanks. Does the PGM IN mix with the coms, or is it one or the other?
@MarkWhite19822 жыл бұрын
Also, I do they sell the hub with 6 headsets? I know its not needed, but the hub has many features Id like to use. Just dont need 9 headsets.
@hollylandtech2 жыл бұрын
@@MarkWhite1982 Hi there! You can set up one group for PGM, please follow these step:kzfaq.info/get/bejne/rcxmdMKAz9Cmqqs.html
@hollylandtech2 жыл бұрын
@@MarkWhite1982 Yeah~Our Amazon is selling one single hub and you can buy headsets 6s to combine them.
@user-ku5wy7bn9x2 жыл бұрын
Hi can I buy 6 person set and upgrade to the hub system in the future ,in case I need it?
@hollylandtech2 жыл бұрын
Hi, there. Sure you can do it.
@user-ku5wy7bn9x2 жыл бұрын
@@hollylandtech Great ,but I am in China .Your brand Menagma told me I cant do that ,is there any different between china product and the hollyland product?
@hollylandtech2 жыл бұрын
@@user-ku5wy7bn9x Yeah, so sorry for that. There is no way to buy a solo hub in China.
@user-ku5wy7bn9x2 жыл бұрын
@@hollylandtech But it is functional ,right? If I can get a solo hub ,I can make this upgrade ?
@Jayd_O2 жыл бұрын
Do you sell just the slaves just in case I need to add more to my kit?
@plnfacilities2 жыл бұрын
I have a slave headset on order here in the uk if that helps.
@hollylandtech2 жыл бұрын
Hello, May we know which country you're located ?
@Jayd_O2 жыл бұрын
@@hollylandtech Ontario, Canada
@hollylandtech2 жыл бұрын
@@Jayd_O Message us on Instagram :) we can help instagram.com/hollylandtech/
@user-rh8wi8to8s2 жыл бұрын
Hello. Where can I get the instructions for the hub?
@hollylandtech2 жыл бұрын
Hello, this is detail of the Solidcom C1:www.hollyland-tech.com/detail-solidcomc1. Hope it can help you.😀
@user-rh8wi8to8s2 жыл бұрын
@@hollylandtech Hello. There is not enough information on the capabilities and functions of the hub. Is it possible to program headsets using the hub? Can the master headset hear group A and group B at the same time, or only switch between them?
@hollylandtech2 жыл бұрын
@@user-rh8wi8to8s Hello, the master heatset can hear group A and B at the same time. And yes it is possible to program headsets using the hub.
@user-rh8wi8to8s2 жыл бұрын
@@hollylandtech Hello. when the master headset hears both groups at the same time, do groups A and B hear each other or only the master headset?
@hollylandtech2 жыл бұрын
@@user-rh8wi8to8s The group A can only hear itself, the same as group B. And the master headset can hear them all. Hope it can help u.
@UFOProductionsNL8 ай бұрын
Such a bummer.... spend more than $7000 for the set with hub and a set of 8 inc master, unable to connect those two together. Especially since the master is basically the hub. In my eyes one of the biggest flaws of this system. I don't want two of those hubs on set, it makes setting it up too much work...
@UFOProductionsNL8 ай бұрын
you should be able to connect two masters together. making it a 16 headset network. please fix this Hollyland
@emalandrade Жыл бұрын
Aunque sea subtitúlenlo en español
@JibunnoKage-cj2kz2 ай бұрын
You actually TELL us NOTHING about how to do the pairing to the base system. I turned on the hub, and all of our headsets... NOTHING HAPPENS. WHAT DO I DO NOW??? What a horrible video.... it really tells you NOTHING... no steps, to achieve the pairing. Got to be one of the WORST videos I have ever seen about how to do the most basic function of adding headsets to the base unit.