HOLOSUN SCS installation on Glock 17 Gen5 MOS

Рет қаралды 68,239

Ronald Urbina

Жыл бұрын

Пікірлер: 60

@user-uv4mg4ve9p 4 ай бұрын

I installed one on my Glock 19 and love it. It's even easier to install if you take the slide off.

@chsaad4071 Жыл бұрын

The pleasure of having this beauty

@freedomgorilla1 Жыл бұрын

Such a clean look

@noHandle1776 Жыл бұрын

Lock tite and proper torque are keys to a reliable mount. You missed those. Marking the screw heads helps if issues before problems tol.

@bobjarrard Жыл бұрын

screw already came with Blue LT - lots of folks skip the torque wrench, actual real shooters, and go snub plus an 1/8 turn or so. I have tested torque wrenches and unless calibrated fairly often they go out of spec. Bob in Nevada

@simonstokes369 Жыл бұрын

Clever design

@GTacticalJody Жыл бұрын

Lamp and kitchen lighting won’t charge these things u need sunlight, I sold mines thinking it was tweaking.

@tonyrosel1906 Жыл бұрын

The instructions suggest using Permatex blue threadlocker on the mounting screws.

@RonnieWanKenobi17 Жыл бұрын

yes i bought one a few days after then reinstalled it again with new screws :)

@user-lb1xc8je7u Жыл бұрын

There is no mounting plate needed?. Clever design.

@esckoblickz97 11 ай бұрын

Where to get a replacement for the little plate in the rear he un screwed

@wread1982 Жыл бұрын

Hello sir thanks for the video, can you see the green or red dots better? I’m wanting the Holosun with the ring around the dot thanks

@RonnieWanKenobi17 Жыл бұрын

yes. i prefer the tiny green dot though compared to the one with Halo. makes me see my target better :)

@davidbennett5905 7 ай бұрын

How long did the screws from holosun last?

@21Fxlrs Жыл бұрын

Just an idea you should get some paint pens to mark the screws should they move on you.

@Woodstock271 Жыл бұрын

Good idea. My Holosun did get loose for the same reason his probably will. I took off the plate and screwed the optic on but forgot to clean the factory oil out of the mounting holes on the slide. The blue Loctite on the screws did nothing. The optic was a little loose after a hundred rounds at the range. I took it back off and cleaned out the screw holes with alcohol on a Q-tip, then added new Loctite and torqued it back down. Been solid ever since. Lesson learned.

@RonnieWanKenobi17 Жыл бұрын

Thank you for suggesting. I will do that :)

@mikeprice8307 Жыл бұрын

@@RonnieWanKenobi17 so why is everyone saying these MOS versions need tall suppressor sights for these RTRs?

@JSpidey 11 ай бұрын

@@mikeprice8307 You don't need suppressor sights with the SCS, the SCS mounts directly to the slide and co-witnesses with ironsights. Most RMR's require a mounting plate and they tend to sit much higher.

@mikeprice8307 11 ай бұрын

@@JSpidey do you mean stock height sights? Glock sights are not iron.

@i_smoke_cabage_8000 Жыл бұрын

where did you get a green label Glock are you out side the us i believe green labels are us made Glocks for export

@Mako-sz4qr 4 ай бұрын

I didn’t take any chances with the SCS screws on my G45, I went with the Battlewerx screws. I don’t wanna be that guy with the screw breaking off in the slide.

@liamcraig374 4 ай бұрын

Looks like battlewerx has a couple different height screws for the scs mos. What size height did you order in order to install the sight? I’m looking at getting them for same reason you did.

@kenyattalemonetv1 Жыл бұрын

Any reason for not using the lock tight screws?

@frankenelimtangco2400 Жыл бұрын

Cause it already has

@mikeprice8307 Жыл бұрын

So why is everyone saying these MOS versions need tall suppressor sights for these RTRs?

@raking954 Жыл бұрын

The scs is a direct mount unlike the other ones that require mounting plate

@lanced3256 Жыл бұрын

Hey a question, os the slide which came with the pistol steel aluminum or plastic? it sounded heavy when you put it down

@hamishalexander5048 Жыл бұрын

old ones metal new ones plastic

@venemous8884 Жыл бұрын

@@hamishalexander5048 false all glock slides are metal

@JSpidey 11 ай бұрын

@@venemous8884 He was confused and thought the OP meant the mount cover (forgot the official name). Those are plastic now, they used to be metal.

@KPad87 Жыл бұрын

Does it hold its charge if left in the gun case?

@noHandle1776 Жыл бұрын

Yes, it only needs Alot or light from time to time.

@Drewski423 Жыл бұрын

Hmm. No adapter plate needed for the SCS? Noted

@michaelboyle9512 3 ай бұрын

Great video. I think I'll get one.

@RonaldDannewitz Ай бұрын

The screws break

@Lyndonbtv Жыл бұрын

walang plates?

@markusvolmari Жыл бұрын

There is no mounting plate needed?

@rip9551 Жыл бұрын

Not for the MOS slide variation for glocks

@franzdetroit 6 күн бұрын

You better torque those screws or you will end up like me finding a gunsmith to remove said broken screws

@xYanohn Жыл бұрын

Tu sert à quel couple ?😊

@Myth_rd Жыл бұрын

So the adapter plate isn’t needed?

@hamishalexander5048 Жыл бұрын

not on this holosun model (SCS)

@spokanesurvivaltrainingand5797 Жыл бұрын

I don't know why but it weirds me out that you didn't take the slide off

@mikerobinson8734 Жыл бұрын

Why? That weirds me out that you think that’s weird…

@October.409 Жыл бұрын

😂😂😂

@Lfm2113 Жыл бұрын

I didn’t notice til I saw your comment and now I think it’s weird too 🤣

@newjetcity1865 Жыл бұрын

Umm where’s tha optic plate

@corvetteman0714 Жыл бұрын

Ummm, doesn’t need one.

@82dirtdart Жыл бұрын

You should have removed the sticker. It’s in the mounting channel of the optic.

@jackinyoubaby Жыл бұрын

What sticker?

@jackinyoubaby Жыл бұрын

Oh I see it now. Wonder why it has a sticker on the bottom. None of my 3 Holosuns have a sticker there

@jablack68 4 ай бұрын

NOT USING LOCK,TIGHT

@whytebredd Жыл бұрын

Use your words