Home Assistant Tasmota Integration (HOW-TO)
Рет қаралды 68,964
Күн бұрынHome Assistant Tasmota #integration allows you to control Tasmotized Devices over MQTT without having to add a tone of YAML code.
#HomeAssistant is the best open source smart home hub and #Tasmota is the best open source firmware for ESP8266 and ESP8285 based IOT devices, so let's integrate them.
► TIME TABLE
00:00 Intro
00:29 Requirements to meet?
00:39 MQTT Server?
00:51 Installation of Mosquitto
01:31 Add MQTT integration in Home Assistant
02:10 Tasmota Firmware
02:26 Configure MQTT in Tasmota
03:30 Configure native Discovery
03:57 Home Assistant Tasmota Integration
05:49 Add Tasmota device card in Home Assistant
► MY GUIDE - ON SALE
Smart Home Getting Started Smart Home Guide v2.0 - peyanski.com/product/smart-ho...
► AFFILIATE LINKS
Ubiquiti UniFi Dream Machine (UDM) - amzn.to/34B0FQK
Ubiquiti UniFi Security Gateway (USG) - amzn.to/2WCYNCk
Ubiquiti Networks Networks UniFi Security Gateway Pro (USG-PRO-4) - amzn.to/3palPwQ
UniFi Dream Machine Pro (UDM-Pro) - amzn.to/3paw3gG
Raspberry Pi 4 4GB Starter Kit with 32GB Micro SD Card - amzn.to/3qaI5qN
Best Crypto currency exchange Binance - www.binance.com/en/register?r...
Tech that I’m using right now - www.amazon.com/shop/kpeyanski
Get $100 in credit over 60 days for DigitalOcean - m.do.co/c/6dd2caef1f1f
► SUPPORT MY WORK
Patreon - / kpeyanski
Paypal - www.paypal.me/kpeyanski
Bitcoin - 1GnUtPEXaeCUVWdJxCfDaKkvcwf247akva
Revolut - revolut.me/kiriltk3x
► CONFIGURE NATIVE DISCOVERY IN TASMOTA COMMAND
SetOption19 0
► MAKE YOU TASMOTA DEVICE AS SWITCH OR LIGHT IN HA
SetOption30 0 - for switch
SetOption30 1 - for light.
► COME AND SAY “HI”
My Discord server - invite.gg/kpeyanski
Twitter - / kpeyanski
✅ Don't Forget to like 👍 comment ✍ and subscribe to my channel!
► DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
@opar7s 2 жыл бұрын
I searched long time how to do this and finally your tutorial makes it very simple. Thank you a lot!
@KPeyanski 2 жыл бұрын
Glad to hear that! Enjoy!
@JohnMassaglia 2 жыл бұрын
Thank you for the detailed instructions. I had looked at tutorials and couldn't figure out why my new switches wouldn't show up and then your video pointed out the firmware version requirement. I was only on 8.4.0 on my new Athom switches. I upgraded them and they showed up immediately.
@jcdock 2 жыл бұрын
Everytime I search for how to do something with home assistant I always end up on your video! Keep up the good work!
@KPeyanski 2 жыл бұрын
Awesome! Thank you for this comment :)
@OlivierCourmontagne 6 ай бұрын
Execellent explanation, even now with totally different versions of HA, Tasmota and Mosquitto, it still works. Thank you Mr Peyanski ;)
@TechDogeth 2 жыл бұрын
Thanks for mentioning the Tasmota firmware version 9.2 or higher, most other guides skip mentioning this. It led me in the right direction when working with some Costco Feit Electric BPA800/RGBW/AG/2P lights (flashed with TuyaConvert). A few notes: 1. The lights reported "Tasmota 9.2.0 by Theo Arends" however, on closer inspection under information, it was this firmware type "9.2.0(lite)" which might have been part of my problem. I used the included "Firmware Upgrade" option and was taken to "Tasmota 11.0.0 by Theo Arends" (normal version, not light this time). 2. It just worked after the upgrade and command: SetOption19 on or SetOption19 1 3. I'm guessing it changed at some point from 0/off for that option to 1/on to get the desired behavior. 4. Before the upgrade I could see the MQTT messages when subscribing to topic # for status and other items, however, there were no posts to the tasmota/discovery topic, which is why it was not working for me. Hopefully it helps someone. Thanks for the detailed explanation.
@charan7208 Жыл бұрын
Thanks for the Amazing video!!! I thought it would take ages to setup Tasmota devices. Done in minutes. Saved my lot of time!!!! Thank a ton again..
@aggelosaggelopoulos5592 5 ай бұрын
Love you man, you are of great help
@KPeyanski 5 ай бұрын
Supper happy to hear/read that :) Thank you and don't forget to check my other videos as well :)
@MrEl0presidente 2 жыл бұрын
Thank you!! Easy to follow instructions. Much appreciated!
@KPeyanski 2 жыл бұрын
Glad it helped! Check my other videos as well :)
@sanjaybali4092 2 жыл бұрын
I am thankful for you for making such great full videos for us. It was the only video that help me to find my devices. Thank you again.
@KPeyanski 2 жыл бұрын
Happy to help! Feel free to join my Discord server as well! Special invite link for you 👉 invite.gg/kpeyanski
@sanjaybali4092 2 жыл бұрын
@@KPeyanski may you please tell me how to control this now with google assistant
@Extra_Mental 2 жыл бұрын
Legend, i was on version 6 and i couldnt get MQTT working, then i tried to update over wifi and bricked it, then flashed it with jumpers and used this tutorial, very happy with the result, thank you
@KPeyanski 2 жыл бұрын
Thanks for sharing and I'm very glad that I was able to help! Enjoy!
@tamirshapira 7 ай бұрын
Wonderful instructions!! Thank you so much. it was very helpful.
@KPeyanski 7 ай бұрын
Glad it was helpful! Check my other videos as well they are helpful as well ;-)
@jasonw70 2 жыл бұрын
Thank you. This helped me configure the Athom smart mains sockets to work with Home Assistant 👍🏻
@KPeyanski 2 жыл бұрын
Great to hear!
@rambogarage9601 2 жыл бұрын
You are really good at giving instruction. Thank you so much for making this video good sir.
@KPeyanski 2 жыл бұрын
So nice of you. Very glad that you like the video and it was helpful!
@MrChelseauk1 2 жыл бұрын
Thanks just used your guide Very easy to follow
@KPeyanski 2 жыл бұрын
Very glad to hear that. Check my other guides as well.
@82kitas 2 жыл бұрын
thx a lot! you are the best and most likeable HO-youtuber.
@KPeyanski 2 жыл бұрын
Wow, many thanks! I'm trying to help :)
@alessioletizia1371 10 ай бұрын
Thanks!!!! you are save me!!! Fantastic video.
@KPeyanski 10 ай бұрын
Glad I could help! Check my other videos as well!
@SirRandallDoesStuff 2 жыл бұрын
Thank's Man I set this up a few years ago. But I upgraded to a pi 4 and I forgot how to set up the device itself. This helped me get things back up and running.
@KPeyanski 2 жыл бұрын
Glad it helped. Enjoy!
@Timsin2 2 жыл бұрын
I LOVE YOU oh wow that was hard work trying to do it on my own - then watching this made it so much easier!
@KPeyanski 2 жыл бұрын
You're so welcome! Check my other videos as well!
@kevinb6369 2 жыл бұрын
Super Tutorial Thank you !
@KPeyanski 2 жыл бұрын
Glad it was helpful! Check my other videos as well!
@HackingInfo 6 ай бұрын
so well explained and easy to understand🔥🔥
@KPeyanski 6 ай бұрын
Glad you think so! Check my other tutorials as well :)
@Nobbi_TheRock 2 жыл бұрын
Explained very well thanks
@KPeyanski 2 жыл бұрын
Glad it was helpful!
@powermate 2 жыл бұрын
great videos , thanks for that.
@KPeyanski 2 жыл бұрын
Glad you like them! And thanks for watching them!
@piotr.wozniak Жыл бұрын
Super!
@KPeyanski Жыл бұрын
Thank you! Cheers!
@PeaJayProduction 2 жыл бұрын
Awesome, thanks!
@KPeyanski 2 жыл бұрын
My pleasure! Check my other videos as well!
@mikestierle1848 Жыл бұрын
Great video! Thank you! Is it normal that Home Assistant updates the sensor every 5 Minutes? I thought that I can the live values of the sensors in HA?
@dr.jishnu7926 Жыл бұрын
This tutorial is nice. 👍👍
@KPeyanski Жыл бұрын
Glad you think so. Check my others as well
@xtremeideaz 3 жыл бұрын
Hello Sir, great videos. thanks for this. I would love to see a simplified Node Red beginner video at your spare time. thanks for your great tutorials. am a great fan
@KPeyanski 3 жыл бұрын
Noted! And thanks for the comment :) See you around!
@ngoctaiquach3144 Жыл бұрын
Hi! Thanks for the good video. But Sonoff mini, Tuya 3 gang, Sonoff 3 gang can't follow this guide? Is there any way please help!
@stehof2 28 күн бұрын
Good thing to know, what wasn't clear for me, is which user/pass you should use in the MQTT config on the Tasmota device. Turns out, you can use a local user defined in you HA settings, could be your own login, I choice to create a new one that I will only use as MQTT authentication. :)
@EsotericArctos 3 жыл бұрын
Smashed the like for you :). Tasmota is definitely one of the best Firmwares for ESP8266 / ESP32 based devices. ESPHome would be very close with it. I tend to use Tasmota for off the shelf switches and the like, and ESPHome for home made/maker devices.
@KPeyanski 3 жыл бұрын
Thanks Brendan. Glad we have you here. Yes, ESPHome is also very good, but it is part of Home Assistant now and I'm not sure how to count it ;)
@EsotericArctos 3 жыл бұрын
@@KPeyanski I think ESPHome still has a stand alone project. Tasmota is becoming more integrated in Home Assistant also lately. It seems a lot of projects want to be part of Home Assistant :)
@KPeyanski 3 жыл бұрын
Indeed and now with the latest HA release it will be clearly visible how many installations are out there. Which will lead to more and more vendors that will want to integrate with HA in a best possible way!
@EsotericArctos 3 жыл бұрын
@@KPeyanski Home Assistant is better than a lot of commercial offerings that's for sure. Homeseer is awful. HA is even better than SmartThings in many ways, even more so since the SmartThings hardware has now been taken over by Aeotec.
@KPeyanski 3 жыл бұрын
Totally agree, I'm somehow disappointed with ST and their list of supported devices. It is tiny compared to HA.
@rogeriorodrigues3265 2 ай бұрын
thank you very much
@KPeyanski 2 ай бұрын
Glad it helped
@MrZeeshany 3 жыл бұрын
Thanks for the video, can I add my sonoff zigbee bridge tasmotized with this integration?
@KPeyanski 3 жыл бұрын
I'm not sure, I guess you should try it. Just make sure that the Tasmota version is 9.2 or higher
@MariusVilceanu 2 жыл бұрын
I've put: SetOption19 1 foe enable, if I set it to 0 qill disble, tasmota 11.1.0 MQT: Connect failed to ...... so it not qorking, yet
@breccoacanale3250 3 жыл бұрын
I LOVE YOU!
@KPeyanski 3 жыл бұрын
Really? Why? 😂🤣🤪
@breccoacanale3250 3 жыл бұрын
@KPeyanski because I have an old version of sonoff-basic and I couldn't get it to communicate with my home assistant, until today! I didn't realize version was the problem. And now I'm happy, very happy. Thank you!
@KPeyanski 3 жыл бұрын
Now I understand. Enjoy 😉
@borutremskar6843 2 жыл бұрын
Works.
@KPeyanski 2 жыл бұрын
nice to hear that ;)
@ronm6585 3 жыл бұрын
Thank you.
@KPeyanski 3 жыл бұрын
You're welcome, Ron! Do you have any Tasmota devices to test this or you will pass?
@ronm6585 3 жыл бұрын
@@KPeyanski Yes sir, I do.
@KPeyanski 3 жыл бұрын
Great, enjoy!
@m.romaithi6217 3 жыл бұрын
Hey KPeyanski, Thx for the great info. Can you give us examples of devices with the esp8266 please.
@KPeyanski 3 жыл бұрын
Oh boy they are so many and I cannot list them all. Most popular ones are Sonoff & Shelly relays, Wemos D1 Mini, NodeMCU, and many, many more. Just search in google and you will be amazed.
@m.romaithi6217 3 жыл бұрын
@@KPeyanski thanks man your the best
@KPeyanski 3 жыл бұрын
Thanks for the good words :)
@JosGouders 2 жыл бұрын
Great instruction, now I have to figure out how to turn on the light if the sun goes down....
@KPeyanski 2 жыл бұрын
That is easy. Just create a Home Assistant automation with trigger type sun and event sunset. Use the embedded automations editor in Home Assistant.
@JosGouders 2 жыл бұрын
@@KPeyanski thank you, I already found an instruction on automations on your youtube channel. Keep up the good work.
@razvanon 7 ай бұрын
5:04 to me it shows 1 entry instead of 1 device
@magaareinbredhillbillies Жыл бұрын
wonder why mine want a host name and username password
@Jan93Banan 4 ай бұрын
The mosquitto options no longer take a complete configuration like this. The new UI wants the login, require client certificate, file locations and so on separate. To set up your login enter the username and pass like this - username: SMASH password: THELIKE I noticed it does not take a numbers only password so keep that in mind
@edvardfranke 11 ай бұрын
Algorithms
@panval2014 Жыл бұрын
malakiesssssssssssssssss
@VovanEkb Жыл бұрын
А чо р то такая палевная, тыж вроде давно уже видосы то пилешь?
@KPeyanski Жыл бұрын
I don’t understand a thing here. Hope it is good…
@raportarucristian3275 2 жыл бұрын
Failed to save add-on configuration, Invalid list for option 'logins' in Mosquitto broker (core_mosquitto). Got {'certfile': 'fullchain.pem', 'customize': {'active': False, 'folder': 'mosquitto'}, 'keyfile': 'privkey.pem', 'logins': None, 'username': 'home', 'password': 'password', 'require_certificate': False}
@NT-eh6om 2 жыл бұрын
Don't delete the [ ]
Makernix
Рет қаралды 18 М.
Digital Mirror
Рет қаралды 123 М.
Echo Routine
Рет қаралды 54 МЛН