At 5:45 I meant to say those devices in corridor and stairwell are less sensitive. Thanks for watching!

I was actually going to ask you to test the pre- alarm feature of the smoke detectors in a monthly system test. Nice to see the system working and protecting your house. Great video! Keep up the good work!

Nice! Soooo cool that i shows you the percentage of smoke in the smoke chamber on the announciator

Perfect system! Not only are low frequency sounders good for the rooms, but code 3 especially because I once saw you put them in continious, and they hurt my ears pretty bad, and horns (especially for me) are bad because they will increase panic attacks no matter if it is a system sensor horn or a Wheelock horn. Also I thought for a while that the sounders were horns but you didn't call them horns once.

The cast iron skillet returns again, causing an alarm that isn't false and the system worked like how it should

I think that it would have been concerning if it didn’t go off. The system was doing its job.

Nice to see your system working as it should!

I was going to recommend swapping the heads from the bedroom and the stairs to see if one head is less sensitive, but the explanation you made on the sensitivity setting makes sense. If they were set the same then I would try that.

Jackson: GRRRRRR me: be quiet lol

You should put a small exhaust fan in the house love the videos keep up the great work

You need to do July testing

In your next monthly test, you could test the heat detector in the store room in the garige and the heat detector in the shed that is attached to the house.

Nice video and nicely explained 😊, does Notifier/Honeywell make any multisensors ?

Only at 1:53, so I'll edit if it changes, but I recall reading in a US Notifier (or maybe firelite, but I think it was notifier) brief that you can have detectors grouped and it will look at the chamber values of that group. Not a notifier tech, so I don't have access to manuals that would confirm how this is setup, but I assume if you haven't enabled that then it's not what is going on here. If this feature does exist, it might be something to play with in the future.

Nice video

great video! im writing a mod for Minecraft (fabric 1.19.2) that adds some fire alarm devices and exit signs. i currently have a BG-12 pull station, a white exit sign, and a key for the pull station.

1:12 Jaxon?

I agree that smoke alarms are unreliable more often than they should be, so I also installed a fire alarm system in my house monitored by an American monitoring company, ADT. I don't recommend getting it monitored because it already sends emails and notifications to your phone without monitoring, and the monitoring fees are at least 100 USD each month, which is extremely expensive. Overall, the system is exceptionally high quality and has a pre-alarm to prevent false alarms. I have had the system for nine years, and it has picked up a real fire in an oven caused by debris being left in the stove, which got me and my family safely evacuated and quickly notified the fire department before the fire spread further. The system also does CO as well. Just yesterday, my house had a dangerous outlet that sparked so horrifically it split in half and crumbled into pieces, but I was much less worried even knowing there was an active fire hazard because of the fire alarm system. I encourage everyone who reads this to stay as safe as possible by at least getting residential smoke and co-detectors in recommended areas of the house. Stay safe and even safer with fire protection.

Jackson is really unhappy with the alarm huh! Poor guy! Give him some pats from me and tell him he's a good boy! 🐶 🐕

*I just had a fire drill at school today.*

Nic do you think than its possible that I could have something like adt installed than and then ask it is a requirment to have a monitoring fee I mean theoretically it should work and be able t dodge the monitoring fee ? I guess in theory it would work but it does not mean they allow it ?

fire

Cool! :3

nice and nicely explained

Jaxon or what ever how you say his name

Yes thank you for uploading

What's the fifth monitor module above the panel (the one above the garage tie-in module) for? Also, what were you cooking when the smoke detectors went off?

It's like last time in November it went off

I need ramplacing smoke detector to heat detector ???

HI Nic I may have watch this video but I also tried to look it up on line are you saying that the pre alarm is a condition in a professionally installed system that raises the sensitivity of certain alarms or am I missing something thoughts please thank you!

at 3:15 is the door closer attached to the door thats its supposed to be closing and the door mounting location?!

do you clean your heads out with compressed air every so often or dust build up can cause them to go off for no reason

Dog is going crazy

Like many commercial fire systems when a alarm goes off it automatically calls the fire department. Does your system call the fire department or do you have to call the fire department yourself?

I wish my family gave in and let me install a fire alarm system as one time something burnt in the oven and there’s aton of smoke and the only smoke detector thats on the floor did not go off. I have been living in this house for over 10 years and those smoke detectors need to be replaced

You shouldn't have taken off your work boots near the detectors. 😅

Try putting an annunciator for the garage system next to the house front door pull.

0:45 fire alarm goes off 0:52 fire alarm stops 0:54 alarm signs stop

Your dog hates alarm

In my personal opinion, pre-alarm shouldn’t be used because every second counts in a real fire and or smoke situation. I find it ridiculous that Disney World has pre-alarm set to 2 minutes on attractions but that’s just me lol

bruh