This is my first video to show how I built this window bay seat. I hope people find it helpful or even use as a guid. If you like it let me know. Currently I am doing up our home so have plenty more things to build.
Пікірлер: 54
@Horsecaring55 жыл бұрын
Thank you for this video. Been wanting to do this myself but never felt confident enough in the past. After being let down a few times with builders, I finished off their work and pleased with the results. Watching this, I am going to get the wood and build one. Thanks again for making this video. Really helps massively!!
@oliverevans78532 жыл бұрын
Great video, would be really helpful if you did a full list of materials needed at the beginning. For people with no DIY experience it's a little tricky to know where to get started on that front! Wish me luck!
@george787796 жыл бұрын
Ensure to create an opening for the air to circulate in constant flow. Great video, thanks for sharing.
@sohail7894 жыл бұрын
Not sure what you mean
@russellg37753 жыл бұрын
@@sohail789 he means you need a vent or similar otherwise the contents inside the cupboards will become mouldy. Having said this, I fitted similar in my house years ago and never had a problem.
@swcomer7 жыл бұрын
Thanks. I made this. The addition was built by a previous homeowner decades ago and is no longer level. So I built the front framework first, then using a level placed the back baton with one screw in the center. This enabled me to get it level with the front and then the tilt the baton horizontally until that was level. The rest went as you described. I noticed that you placed a baton on the floor behind the front framework.
@hassnainnajib3 жыл бұрын
Great video. Can I ask what thickness of wood was used for the framework?
@rubel2474 жыл бұрын
great video
@KBBAKTHA5 жыл бұрын
Awesome project and good crisp video. Thanks
@gsdls4 жыл бұрын
Great video and demo. Thank you
@asaad88163 жыл бұрын
Really Good work
@NoLiesWereTold6 жыл бұрын
Would have been good to see how you screwed in the beams into the wall
@zanyzoo67675 жыл бұрын
bend your hinges it will equal out the door gap around the edges
@cathy1027 Жыл бұрын
Approx how many hours will this take for a fairly knowledgeable person??
@gregpugh4632 Жыл бұрын
Hi. It took me a day to build all the framing and top. Then I did the doors and started the paint the second day. Give it a go. You got this
@billu24113 жыл бұрын
How did u attatch the 4 middle wooden bits to the back main wall
@animeko2 жыл бұрын
Hard to see but should be pocket holes
@cbrm3067 Жыл бұрын
Hi Nice video. Did you use the studs in the wall to fix the batons to? Thanks.
@caitlinhillary7614 жыл бұрын
Great video, but would have been really helpful to see how you cut the angles for the top. This is always my downfall in DIY projects! Just can't work them out!
@gregpugh46324 жыл бұрын
Caitlin Hillary thanks for the comment. I just used a digital angle finder, and measured the smaller length and then applied the angle. Always cut on the side of a bit to big and trim down. Just keep trying and having fun building.
@mr.kingyosh47557 жыл бұрын
nice work
@chriscullen49945 жыл бұрын
awesome
@BestAccessDoors6 жыл бұрын
Fantastic job! Do you have plans to do more videos like this?
@nickpiggott6495 жыл бұрын
I have an identical space - just with a radiator - is something like this still advisable with some of ventilation or would you recommend an alternative option? I would like as close to what you have done here as possible tbh... Thanks.
@luisrios67274 жыл бұрын
HI with lumber do you Use for the frame, because construction lumber are not plane or symmetrical, thanks
@gregpugh46324 жыл бұрын
Luis Rios thanks for the comment, in this project I used pine from my local timer merchant, you can get it planned to the thickness you like to make life easier. Hope it helps.
@jorrba39344 жыл бұрын
I'm planning to build two and attach them together shape as an L. I wasn't sure if i should attach my seating to the wall?? Or make two boxes and add a frame in front without attaching them to the wall.
@gregpugh46324 жыл бұрын
Either should work great, making boxes before hand and attaching face frames is the more traditional, however would cost more in material. I would always suggest drawing it out first and even input it into a 3D modelling tool like Sketchup. it always helps me.
@jorrba39344 жыл бұрын
@@gregpugh4632 Making boxes and adding frames will cost more. I didn't think about that. This will be my first time building a bay window seating, but i feel confident that could do it. Thanks for the feedback and thanks for your video
@kai_johnsonn5 жыл бұрын
Cheers for the video Greg. Was wondering how much you spent doing this? Am building one myself so just needed a rough cost
@gregpugh46325 жыл бұрын
Kai Johnson thanks for the comment. So this one cost about £125. Was simple 2x3 lengthens and some flooring boards. The MDF I used for the doors I already had. But prob just about £30 for the sheet + decorative strip wood. Post yours once complete yours man.
@cathy1027 Жыл бұрын
How many hours to put this together?
@jackanderson44943 жыл бұрын
The one thing I'm struggling to get is a cushion/foam to sit on top.. where did you get yours bud
@gregpugh46323 жыл бұрын
Good question. I had it custom made online. I can’t find the website I used but something like this site will help www.foamandcovers.co.uk/bespoke-cushions
@jackanderson44943 жыл бұрын
@@gregpugh4632 legend cheers mate
@kevinramos51882 жыл бұрын
I need the materials for this project
@BigBoJay4 жыл бұрын
How did you figure out how much smaller to make the doors than the openings so that they fit properly
@gregpugh46324 жыл бұрын
Borisaurus Rex, just taking 2mm off each edge gave me plenty of space, the doors are only 18mm thick so don’t need much space to pivot.
@BigBoJay4 жыл бұрын
@@gregpugh4632 thanks for the response. Did you use a router to put the MDF board in for the doors or is there an even simpler method?
@gregpugh46324 жыл бұрын
@@BigBoJay so i built the doors by adding some decretive strips to an MDF cut out, nothing crazy, to hang them i just added the hinges without countersinking them, they are thin hinges so no bother. Like i said i hated doing doors, and this was a simple go at them, i have got better though trying and now use a router options to build styles and rails and slot the board in a groove. hope that helps
@maceyskelton61463 жыл бұрын
What is the name of the paint color you used
@gregpugh46323 жыл бұрын
Really sorry but can’t remember the colour, it was an oil based farrow and ball paint. Hope that helps.
@shanebaillie79262 жыл бұрын
How does a Carpenter call it wood?? Its timber
@juliejephcote Жыл бұрын
Didn't actually see any wood cutting or fixing just when it was already done
@InsanelyGhostly4 жыл бұрын
What should I charge for this?
@samoanSAIYAN4 жыл бұрын
Gobby
@carisia76632 жыл бұрын
Good job! But the translation is horrible that's not what you say.
@nahnotreally4164 жыл бұрын
Are you going to finish the inside of it? It looks horrible
@gregpugh46324 жыл бұрын
nadya kinchen thanks for the comment. Yes I put down carpet inside to help with looks but also drafts from the floor boards.
@nahnotreally4164 жыл бұрын
Aww okay great, other than that it's really lovely
@hannibananie227 Жыл бұрын
Couldn’t understand 80% of what was said, nor could I get over all the sniffling GEEEEZ
@Hevva675 жыл бұрын
This doesn't really show how it's done for the most basic of DIYers. Like how to put the rawl plugs into the wall.. Also really hard to make out what you're saying, because you mumble.
@samanderson48503 жыл бұрын
Agree. I thought it was my ears but yeah he mumbles. Didnt find the video much help for me as a first time diy'er sorry
@smurfman6913 жыл бұрын
So watch a video on how to put plugs into the wall. Or do you need instructions for that also?