No video
HOME MADE recovery board mounts !
Рет қаралды 2,914
Күн бұрын#stresslesscampmore !
Who else out there has recovery boards like Exittrax, TRED, Maxtrax etc and has trouble finding a good spot to mount them ?
Sure you can buy mounting kits however some of these are bloody expensive for what they are ....
Well I wanted somewhere to mount mine and with our vehicle being a wagon, a smaller wagon too, we had limited places to mount them .... so I came up with this home made that also doubles up to hold my shovel too - a win win !!!
Cost me bugger all in materials and maybe 1/2 an hour on a Sunday morning to knock up ...
Where do you mount yours ?
Would you make something like this ?
Let me know what you think.
Thanks for all the support folks, greatly appreciated.
A special thanks also to patrons
* Rob from Australian Camping & Four Wheel Drives
*Jeff Bonner and
*Ben Strachan
Don’t forget to hit like & SUBSCRIBE so you don’t miss out on any of our fresh content.
/ 4wheelinginnsw
/ 4wheelinginnsw
4WheelingInNSW...
/ 4wheelinginnsw
/ 4wheelinginnsw
/ 4_nswthanks for all the support folks, greatly appreciated.
All music is as per youtube standards and are copyright / royalty free
Bloome:
/ bloomeofficial
/ bloomeofficial
creativecommons....
Music provided by RFM: • Video
Song: Peyruis - Gonna Sing
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
@ryaneconomy8619 2 жыл бұрын
Thank you
@4WheelingInNSW 2 жыл бұрын
You’re most welcome, hope it helped 👍🇦🇺
@erpursnrhansen7849 11 ай бұрын
Love your simple design! Intend to build one, with some modifications for my cargobox clearance. Will send photo. However I have a simple improvement suggestion, invert the carrying bolts, and extend ca 2 cm out of the trackboards. Use pipe to bridge the gap to the pin. Then you can loosen rhe boards more easily from the outside. I intend to use 4 bolts. Thanks for a great solution, and supersaver from the overpriced commerical systems.
@4WheelingInNSW 11 ай бұрын
Thanks mate, glad you like it. And great suggestion on the longer bolts as you do want it to be super quick and easy in a “have to grab it off fast” scenario. Thanks for watching and once you’ve done yours, I’d love to see it !! Maybe send me some pics and I’ll put them up on my Facebook page - Facebook.com/4WheelingInNSW Cheers bud 👍👍
@shaddonaghue 3 жыл бұрын
Nice one buddy 🤠👍👍
@4WheelingInNSW 2 жыл бұрын
Thanks mate 👍
@lumil4371 3 жыл бұрын
good content👍
@4WheelingInNSW 3 жыл бұрын
Thank you kind sir
@donfinch862 3 жыл бұрын
Noice. As you know, a lot of people like to make their own gear for the enjoyment and satisfaction of the project. Cheers Grant
@4WheelingInNSW 3 жыл бұрын
Thanks mate 👍👍
@johnalexander7831 3 жыл бұрын
Excellent mate, keep them coming.
@4WheelingInNSW 3 жыл бұрын
Thanks champ 😉
@jackturtle131 3 жыл бұрын
Good one Grant, and so simple to do
@4WheelingInNSW 3 жыл бұрын
Thanks mate ... can’t beat a cheap home made mod, cheers bud 😉👍
@MudducksTouringAustralia 3 жыл бұрын
Nice little mod Grant. Cheers Steve
@4WheelingInNSW 3 жыл бұрын
Thanks mate 😉
@louiskudlak2241 3 жыл бұрын
Good video buddy, I’ve got several home made creations on my 4wd, don’t have big budget, lov seeing home made stuff, cheers Grant 👍👍
@4WheelingInNSW 3 жыл бұрын
Thanks heaps mate for the kind words, appreciate it 👍 yeah I love home made projects. You’ll have to send me some pics through Instagram, Facebook or my website as I’m always happy to share home made projects cheers bud.
@louiskudlak2241 3 жыл бұрын
@@4WheelingInNSW I’ll try buddy, not that tech savvy 🤣🤣
@4WheelingInNSW 3 жыл бұрын
@@louiskudlak2241 🤣😉👍
@paulandhelenakathenats4320 3 жыл бұрын
Nice work 👌🏼
@4WheelingInNSW 3 жыл бұрын
Thanks guys, I appreciate that 👍
@Triple-N 3 жыл бұрын
Nice and simple DIY and cheap. One question though, would you carry extra drilled bolts, just in case you lose them in mud in a mad rush recovering?
@4WheelingInNSW 3 жыл бұрын
G’day Normann, thanks mate. Yeah that’s probably not a bad idea with the extra bolts - if not and I lost one, I could always just throw them up on the roof in the interim to get home but, I like your way of thinking 😁😉👍
@Triple-N 3 жыл бұрын
@@4WheelingInNSW Another idea though is to drill a another hole just underneath the head of the bolt then thread a 1.5 or 2 mm stainless steel wire rope through it. Secure the other end of the rope somewhere on the board. That way the bolt will always going to be attached to the board mount. I hope you get the picture in trying to portray. ☺
@4WheelingInNSW 3 жыл бұрын
@@Triple-N I hear ya, good thinking bud 👍 I think I’ve just found my new PDM - Product Develop Manager 🤣🤔 Thanks mate 👍👍
@Triple-N 3 жыл бұрын
@@4WheelingInNSW PDM hey... I'll take that. ☺ Let us all know how you go with Version 1.1👍🏽🙂
@4WheelingInNSW 3 жыл бұрын
@@Triple-N 🤣👍
Independence Overland
Рет қаралды 44 М.
Overland Engineer
Рет қаралды 17 М.
Tacomaholic
Рет қаралды 41 М.
TX:GX Overland and Off-Road
Рет қаралды 11 М.