“re-read my own blog” 😂 spilled my tea

Looking forward to the zigbee video!!!

That video was fantastic! It's so helpful to see you reflect on past choices and share your long-term experiences with different hardware. Your honest reviews are a breath of fresh air, and I love your signature style - informative, funny, and down-to-earth. 👌 Keep up the great work! 🎉

I'm not sure how much use I'll get out of the video but I will say it was very well done and informative and pleasant to listen to. 1 like from me!

I so much wish you made a separate channel exclusively for STEP by STEP tutorias on EACH smart thing you have done. There is nothing like that out there and you are very clear and approachable, you are the rigth man for the job. I was going to make fun of you too about your "partner" BTW.

I agree...Light automations are the most used and myself hardly ever touch a light switch... Great channel. keep it going strong

Loved the Lewis cameo, brilliant!

Very entertaining video as always. Looking forward to the repairing zigbee network one. Thanks.

That Zigbee troubleshooting video will definitely help me on my automation journey. Thanx for all the great content!

For A/C - the simplest universal local solution is Broadlink IR + SmartIR integration. Smart IR will create a virtual entity that can even sync state based on the received signal from the original A/C remote(if your partner sometimes refuses to use HA for turning things on 😁). The only tricky part is learning commands if SmartIr doesn't have a set for your particular model - each command is a full state (cooling/heating/fan ... + fan level+ temperature). So it takes some time to set up.

Thanks for the summary. I'd assume your observations are just as valid for the US. If anyone has any comments on that people comment. The most useful comment was to make sure you have power to all of the windows instead of using batteries. I'm planning on building my retirement home and will make sure that is done.

Very interesting to hear you say what’s worked well and not so well. Agree with you on the Aqara and the clicking even when running from automatons. Love your approach to everything as well, very well thought out. Keep the videos coming 👍🏻

Thanks a lot for this. I now know a bit more about what to look out for.

Great video … really helpful to hear what you think has worked and not. Made me very happy I got the zemismart mains powered blinds and paid an electrician to do all the power points. Also made me look into the everything presence sensor to see where I can use that in my home. Love your lighting too

Thanks for this. Very helpful. Excited for the Zigbee video.

I love your videos and have been watching for a long time. Keep them coming! Lots of love from Malaysia!

This vid is such a great summary of lessons learned. Thank you!

Thanks for the video :) looking forward to the next ones

This is an awesome idea! I need to do this too. Great video!

Glad your making videos again. I've got into smart home from your videos.

Thanks for this summary. We are really missing such lessons-learned movies, thanks for yours! The biggest win for me is the "good night" / "good morning" switch which shuts down the entire apartment to the baseline consumption (or wakes it up in the morning). Also, the automatic light sensors are really awesome since i've installed everywhere the Athom presence paired with hue motion for the tougher spots. And -- what really improved acceptance of the automatic lights was the "30s" dimming time of the light brightness. Thats a nice little trick to keep your wife's acceptance of smart home ;)

Looking forward to your Zigbee travails, my journey has been simple quick and troublefree.

Great video! Would love to see the videos about how you solved your Zigbee problems and about the pressure sensors! Also: you have quite a large base power load in your house. I'm at 160W or so, and that includes my home server (37W idle), switch, router, etc. If you want to get it down, I suggest making a spreadsheet with columns for room, device, watts, hrs/day, Wh/day, kWh/yr and cost, and then going through each room in your house measuring every device with a good power meter. Don't forget things like mechanical ventilation, electrical boilers, or your bed if it has motors for adjusting. Would make for a nice video too!

useful information as always thanks

I have found an extremely low res thermal camera and raspberry pi to be a good solution to the bed weighing and being on the toilet too long problems. Yeah there's some code writing to do, but it knows when you're still on the loo. It's also able to know how many people are in a given space using low level image processing like blob detection, even with 16x16 resolution. For me, I wasn't comfortable pointing a camera at the toilet/bed so this was definitely the best of both worlds

your videos have been very useful to me I've recently set up home assistant have got complete local control now wasn't going to go down the home assistant route then Yale broke my £200 smart lock so local control was the only way to go getting everything running locally has really irritated my wife but we're getting there now just trying to keep my smart home simple now

In regards to the battery powered devices you can look into battery eliminators that swap out the battery the device comes with for a faux battery (set if its using more than one for it) that has a usb cable attached to let you power it via the spare power warts, the only down side is that they are not really cheap but it's one option in that regard that I have been looking into for my aeotec motion sensors, switchbot bots, the aqara leak sensor I am using for my occupancy sensor device and any smart locks that I can use them with in the future.

Great video!

*pops popcorn and anxiously awaits the Paul Hibbert response to the Hue lighting comment* LOL!

Looking forward to your ZigBee troubleshooting vid. Was going to point you to another vid I have bookmarked but it's your own vid 😂. Being able to "allow join" on only the closest device was a game changer.

Can't wait for the Zigbee video tbh, my network is mostly reliable but I have a few specific sensors that often go offline. One is a Sonoff ZBMINIL2 and that requires the lighting ring turning off and on again before it'll re-pair. It's also VERY clicky with Off being a horrible 'twang' sound. Like Paul Hibbert I love the channel :)

Nice video, looking forward to the zigbee learning video (even if I don't use zigbee), I have the same OCD as you with regards to the position of a lightswitch, still using Shelly but converted to pushbutton, instead of flip switch, and my OCD is now fine. I really like network products like Shelly

Great summation. Thank you for sharing it with us. I am looking forward to seeing you updated zigbee troubleshooting video. Zigbee is great until it isn't and I seem to have a few devices that just love to drop off the network at the most inopportune time. Joe

For light switches in a new house we are doing we are using fancy nickel plated (normal) switches from a leading brand but specced them with momentary mechanisms so you click them to turn on or off and they spring back out) very similar to a aqara switch. We then have a shelly relay behind them which smartifies them. It works great. It took me ages to work it out (I made a test rig to try to work out what was best) but the shelly relay has an option in the settings to work with these switches and once I found that we were away. This is the best choice for us because we can have absolutely any light switch and still be smart. Becasue we were gutting teh house we changed to deeper back boxes to allow room but witht the latest shellys (the mini) they are tiny and would most likely fit in any back box. My only change is i am currently testing zigbee tuya versions of the relay as I dont like that shelly only offer wifi or zwave. TBH the wifi would be fine. In my other place I have shelly wifi switches doing all sorts and they have been faultless

Great video! I have both Zwave and zigbee and Zwave is much more reliable and at least triple the range! Though zigbee sensor battery life much better. My Zwave has been rock solid running every light for about 5 years.

Great video, I’m sure a left a comment on your new home video to run cables to everything. I don’t like to say I told you so but I’ve learnt a lot over 15 years designing C4/Lutron based systems but I know it’s easier said than done 😀 I use zigbee/battery devices in my own home!

re: power monitoring I like a combination of plugs and central circuit based monitoring. Nice combo. for general for targeted monitorng

Stay woke brother! ✊

Ahaha, I love that you are "stuck" on the same point for the FSR bed sensor as I do. I also bought all the parts, put it all together but the resistor value calculation struck me the most. Funnily enough, the recommended value that was mentioned on the forum worked fine for me (can't remember it now, sorry). It worked perfectly as a proof of concept also with LED and PIR sensor that I included in the ESPHome but I never installed it on the bed itself. I'm also considering of using VL53LOX Time-Of-Flight Sensor instead of the PIR but I'd have to do some more testing on that. Would love to see your take on it as well. Here is what I used when it comes to the ESPhome. Of course, make sure to adjust the entity names :) # LED - WS2812B light: - platform: neopixelbus type: GRB variant: WS2812 pin: GPIO23 num_leds: 50 name: "LED strip light" # PIR Sensor binary_sensor: - platform: gpio pin: 19 name: "PIR Sensor" device_class: motion # Pressure / Occupancy sensor (FSR) - platform: template name: "Bed occupied" id: bed_state_test device_class: occupancy icon: mdi:bed-outline lambda: |- if (id(bed_sensor_test).state < id(trigger_level_test).state) { return true; } else { return false; } number: # Pressure / Occupancy sensor (FSR) - platform: template name: "Michal bed Trigger Level" id: "trigger_level_test" mode: box optimistic: true min_value: 0 restore_value: true unit_of_measurement: "V" device_class: voltage max_value: 3.3 step: 0.01 icon: mdi:chart-sankey sensor: # Pressure / Occupancy sensor (FSR) - platform: adc pin: GPIO36 attenuation: 11db accuracy_decimals: 3 device_class: voltage name: "Bed sensor" id: "bed_sensor_test" icon: mdi:arrow-collapse-vertical update_interval: 0.2s filters: - exponential_moving_average: alpha: 0.1 send_every: 1 - or: - throttle: 180s - delta: 0.02

I agree with your device protocol choices. I prefer Wifi wherever possible, and Zigbee for the rest. Inevitably that means mains powered devices are Wifi, and battery powered are Zigbee. My biggest Zigbee learning was to find the most unused 2.4Ghz spectrum for the Zigbee channel. It is important to set the channel before starting to pair devices. The second learning is to add plenty of signal repeaters - I use Hue bulbs and Ikea Tradfri repeaters

Great vid, like you say, many of these are point in time how to vids that only work or stay relevant for 12months.

Also, as a future video suggestion, how to "monitor a Zigbee network" session would be great. Such as, how to determine if a device is flooding the Zigbee network, signal strength, etc. Thanks!

Comment on fiber vs CAT6 in the house. There is another option. Fish through a fiber backbone in the house, the run whatever CAT you need at the time (I ran CAT 6A). Gives you the best of both worlds. I have fiber going to my main rack in the basement and to the secondary distribution rack in the attic. My system have two runs of fiber for the future, but I am distributing on CAT 6 A in the short term to the APs. Wasn't cheap either, but agree investment is the way to go

Really useful roundup thanks. Interesting to see you move away from battery motion sensors to mains powered mm wave. I have a few Aqara FP2s and they're awesome, but we don't have many large, open spaces that benefit from the FP2's ability to define multiple zones and I can't justify the cost of an FP2 in every room 😬. I'm still trying to decide on whether or not to replace light switches and what to go for. 90% of our lights are automated and we don't always want the main room ceiling lights to come on when we enter a dark room, so I've left some lights manual for now. I'm using a mix of Shelly and Tuya zigbee relays as well as zigbee and WiFi smart bulbs. Most of our mood lighting is govee and the excellent govee2mqtt HACS component makes controlling them really easy in Home Assistant. Govee lights don't fade out smoothly in HA though so I might try some Hue strips to see how they perform. I have 120 zigbee devices in zigbee2mqtt so I'm looking forward to seeing how you solved your issues. Thanks again.

On the network cabling +1. Luckily I put a full rack plus switch in place before seeing your videos. Like you, I deeply regret not adding more cabling (also dual cable on the same path). The rapid growth of PoE means you can get so much more out of more cabling. We are also just about to see LED lighting become viable via PoE. Maybe some kind of star configuration would work well to reduce long point to point CAT cable runs, and to take advantage of multi-gig switches which always seem to have reduced port counts.

Your experience with blinds reminds me of my experience with cameras: I started out with wireless, battery-powered options, but relentless charging became irritating quickly. So, I ended up switching to hardwired cameras, and in some areas, that meant opening up the walls again.

I'd love to see a new vid on the bed sensor, tried to make the one you had but it dosen't work with my matress. Folding it will mean its always on and not having it folded means its always off no matter if im sitting, laying or jumping on the bed. Probably going to refund the leak sensor and the pressure pad and just buy an Aqara MM wave sensor to do the bed detection and run some other automations like turning on the hairdryer, spotify and the light (if its dark) if it detects that the bathroom is humid and I have just gone in my bedroom.

The best decision I made was ditching Control4 and going with my own HA build. Look Mom no dealer! Control4 did teach me about the benefits of Zigbee. After that I found switching from Unifi to Asus gaming capable wifi routers and their airmesh system gave me a faster and more reliable network. But you are better off not network hardwiring them together, instead allowing them to mesh over wifi. I find if you have network nodes meshing over wifi *and* cat5/6 you get network storms. Same with Sonos. I will be upgrading to wifi 7 with Asus when it's available. And sticking with zigbee. Oh the other choice at the start that was huge, was using Digiblurs HA server build using an old Dell mini PC rather than something powerless like a Raspberry Pi. That way I always had enough processing power and RAM and a fast SSD to build a reliable platform without running out of juice and having to upgrade the server. Always overestimate what server you will need as it's inevitable the project will expand. Oh and never run HA off an SD card!

Most probably your Daikin AC can be fitted also with the previous versions of wi-fi adapter (A or B series) parallel to the one they have been supplied with. These older adapter have local api and work locally with official Daikin HA integration. Just check for S21 connector availability on AC main board.

Very useful, looking forward to your ZigBee experience.

I created a zone in the Aqara FP-2 for a bed sensor. It works better than FSR strips (I spent too much time adjusting the placement of these things to make them work). The result of a FP-2 zone for me is ~90%+ success rate. With a bit more tuning/device placement, I think it can dial it in close to perfect.

Good roundup. Might reconsider my zigbee-ignorance. I am early in my HA career and still learn. Agree with the Ubiquiti decision, done that too and it is great. One SSID, VLAN and stable network compared to those mesh-mess I had before. Most of my current devices are from SwitchBot. And running off a dedicated Mini-PC with HA on it. But those devices at least once a day become “unrecognized” and need to reboot the Mini PC. Not sure what that reason is, the wifi can’t be and via the maker app I continue address those devices (curtain, motion, color bulb). So I still have mixed feelings if I can release those stuff to my family. Right now only running in my cave.

200 W constant power just for the rack, 24/7, that's really a lot, that's 1750 kWh per year. Crazy amount, when a lot of families have total energy usage around 2000 kWh per year.

Would love to see the FSR video. I’m planning that journey too

i went the half load cell option for my bed with an automation to tare the weight in the day to zero the scale. works great. for bathroom presence where a mains powered mmwave sensor isn't an option i made and esphome time of flight sensors for the door frame that's like a laser trip wire and it works great

I made an automation based on motion of a RCWL-0516 in my nightstand, so it registered if someone enter the bedroom. When entered the nightstand lights get on, based on who is home. We do have both an Ikea Stybor smart switch at our stand, so if we are ready to get some sleep, we have to turn off the lights. That will trigger some automations, that make shure we do not get blinded by the lights in the middle of the night. Lights get on again on an alarm clock or if we get downstairs or everything resets at sunrise. The lights upstairs wont turn on automaticaly, if they are turned off manualy. Everything with only 1 ikea motion sensor, 2 unifi accesspoints, 1 LDR and 1 RCWL-0516 to stay hidden. Lights downstairs and upstairs are fully automated. Only turning on, when get up early doesn't work at this way. But I would figure this out in the next months. Me and my girlfriend both hate that we can see there are sensors.

Interested to see your next video. I bought my home just about a year ago, and only just started to get into the home automation thing. I'm in Aus, so wired switches are limited, and I didn't like any of the choices. I bought an Aqara 2-gang wireless switch, and while it physically feels great, it's completely broken in Z2M. I ended up going with a mix of 1, 2, and 3 gang wireless switches from Tuya. They look about the same, but don't have quite the solidity of the Aqara ones. For about a third the price they've been good for me so far. I also prefer the physical 'click' sound - the soft touch ones are easy to miss and not trigger if you miss the mark. In terms of AC and automation I went with Broadlink RM4 mini's. They're WiFi, but so far pretty good. The SmartIR HA integration needs a bit of love though to support fan modes and the louver swing/static positions.

There is an ESPhome mod you can do with Daikin A/C's to get fully local control and monitoring. It just means flashing an ESP and wiring it to a plug on the indoor unit

Samsung, for example, offers ESPHome integration that utilizes Samsung’s communication protocol (based on NASA’s RS485 technology), allowing for full local control of your air conditioner with even more features available than the official very expensive WiFi module. 😊

You could use an ir or rf remote hub for your ac that would replace the remotes and wouldn't rely on hacs.

finally you came back :)

Blinds are best kept simple. And hardwired because they use a lot of power and invariable drain batteries. So I have kept my blinds mains powered and control them via IR using a Broadlink controller. One hard to manage set I control using a Shelly contactor. I don't get the position state in HA but I find that's OK because for me Blinds are usually always either up or down. You can still program in different positions simply by using timing logic in automations. Then add different buttons for different positions. If you are really stuck automating blinds into HA (say IR range problems with the Broadlink), the other thing you can do, is solder their original IR remotes into Shelly contact devices. Shelly is awesome and there are always good HA drivers for their products and fast and reliable firmware upgrades. I use Shelly for blind control, garage door, 4 buttons pad control and power monitoring. Super reliable. They have just released some of them with added Zigbee. how cool is that?! Love yr vids dude. Great channel.

Daikin AC's have a WIFI module which you can install in them. I have a Daikin multisplit system with 4 internal units and all of it is being controller via local wifi.

Great video. I have had a virtually identical experience, including Dream Machine Pro and Proxmox HA installation. I've looked in my "smart devices purchased but either not used or stopped using" drawer and found an Aqara cube, switchbot, Ikea devices, Meross temperature sensors and early versions of Sonoff relays bought with a rush of blood to head one Amazon Prime day sale . I have mixed feeling about my Aqara rollershade drivers as they work for most but not all of my blinds, the ones with stiff movements just don't work reliably and all of them can be a bit dodgy if it is really cold outside. I do like the small format of Aqara door sensors, motion sensor and temperature sensors I have about 30 of them, but I hate the fact that I go through so many batteries. I have tried the rechargable batteries but they just don't last long enough. I was an early adopter of Phillips Hue and have about 50 devices, lights and switches mainly I have kept them controlled by the Phillips hue hub and also by Homeassistant, I like the redundancy this provides. One of my most helpfull automation that I developed last year was a boilier efficiency automation which monitors the flow and return temperatures to my boiler, integrating outside temperature data to provide weather compensation information. Using this setup I was able to get my boiler effiiciency up over 94%. My goto smart plugs are also the energy monitoring Local Bytes ones. I have a couple of the Presence one/presence light devices and will use them to replace a couple of Aqara motion detectors. I think the automations that get the biggest WAF for are automatically switching on the electric towel radiator when someone has a shower, automatically switching on the TV backlight when the TV is switched on in the evening and providing us with notifications when the Washing Machine or dryer has finished their cycles

Only 95% OK that is dammmmm good .... Cool video and good input.. Besides cabling and the rack in the laundry ... what else would you have previously done better... Yes the shades. notthing else in the. I do think you should measure and track the humidity level and condensation in the rack room as this will cause trouble to the electronics. It is a high risk high humidity zone

I have Shelly for the switches & push contact grid switching, so that's your ocd sorted. i will probably add the Zigbee Shelly if i was to change them

Mitsubishi splits have a port you can connect ESPHome devices to, that would allow for local control for multizone HVAC.

At this point I'm just really happy if my Phillips v1 dimmer switch turns on and off the light with home assistant. 😂

Some zigbee issues are related to the frequency the devices use to communicate. Most zigbee devices communicate at 2.4 GHz but in Europe some devices communicate at 868 MHz. The alternate zigbee frequency is 915 MHz in the US and Australia. The lower frequencies give you a longer range that can more easily penetrate solid barriers like walls. You get more bandwidth at 2.4 GHz but it has a shorter range and is more susceptible to environmental attenuation.

Nice video, I share your views on most of the equipment you have. I've a couple of the zemismart blind motors myself & really like the action, but the battery life is a bit crap. However, my 2 are reporting their battery percentage in z2m, so maybe try re-pairing them (it did take several days for the battery %age to appear), then you can set an automation for charging reminders or action etc. Have you done anything with bathroom humidity measurement? I've got a couple of aqara sensors for this with the intention of using a derivative helper for switch on/off bathroom fans - it could be a nice video.

Good stuff. Would like to know more of smart blinds and maybe smart locks, like how good they really are and what really are the underlying problems with them. Like said by you, it's an annoyance to randomly just recharge your blinds and other devices, but to know if there is an alternative that shows the battery levels? And if there are, how do they compare etc, stuff like that. :D We get so many reviews and unfortunately most of them are sugarcoated and leaves too many open questions how they work in practice.

CAT6 is still the standard in my works data center environments. I have not seen any DCs utilize CAT7/8 thus far.

Excellent video. Have you looked into air quality automations?

love the 'on toilet' part....

Great video as always and looking forward to the zigbee video. I’m a complete noob and haven’t started my smart home yet and I’m a bit scared of HA as it seems very techy for some new, I’m thinking about the homey pro. What would you recommend?

avoiding battery powered devices is a good idea but it is not always possible. the way i avoid the problem with batteries going flat without warning is to put those sensors in a group which reports the lowest battery level. i also have gauges on my power supply page and 2 automations that get triggered when a battery hits 20% and 10%. the weird thing is that some of my sensors have been in use for months (probably more than a year) now and still report 100% battery.

Some useful info here, thanks. I've wled strips dotted around various places. Lately I've had issues where the controller crashes so the leds get stuck on one colour until I power cycle them. I've even resorted to using WiFi smart plugs to force reboot them daily. Does that make them doubly smart? 😅

My issue with Unifi is that is turning into Apple in terms of their focus on aesthetic over function and LUDICROUS pricing for their hardware. I honestly wish I hadn't gotten my udm pro, switches, and AP's as now if I want to keep expanding/upgrading in the same ecosystem it will cost hundreds of dollars, and I didn't even get any of their cameras!

About your Solar panels and generation, What inverter are you using? How do you get readings from panels into home assistant? i would like to know more about this setup. I have a dumb inverter system and I'm looking for ideas on how to get the stats of generated energy. Are u able to measure direct Solar energy (DC) ? i'm curious to know. I'm also looking forward to the Zigbee video. have same problem u had.

y Somfy powered blinds have a battery recharge life of 6 months, in theory, the RTS protocol has a lot of downsides, but in. practice, I do not find it an issue. The Zigbee versions should be available in the UK towards the end of the year.

Nanoleaf essentials are a good hue alternative, they run on matter and are brighter and half the price

Button(.)Plus is a good alternative for your wall panels. Thanks for your videos

Ok, ok, ok. I have to say it. I love the self-own, re-reading your own blog. Can't wait for that video. I love the censored bit, because... well, we all know what happens and can only imagine why those mats move. And, the cameo! Awkward. LOL! This is what I look forward to. Entertainment.

My cheap radar presence Sensor 2410 can detect us through the matraze of the bed. Thats how I solved this. But at the moment I have no good automation for this. Because we have button at the bed to shutdown all lights in the house and so on.

Another great video. Thank you for this. How many zigbee power monitoring plugs did you have before they became too chatty on the the network? Did it get to the point of causing slowdowns in communication among zigbee endpoints or did you switch to wifi plugs before it got to that point?

I'm sure Tom will be happy his mega bed sensor thread made this video. 😊

Great video as always. I have the exact same regret with ethernet cables and just like yourself it’s too late for me to change them. How are you monitoring the power of your rack?

8:24 16-channel Emporia Vue might be useful here. But only if you manage to flash ESPhome on it, standard firmware is unusable because it's cloud only.

Subscribed and you do good work! The toilet item was funny but a real problem. What was your fix for that? I also have the Aqara FP2 and a Linknlink presence sensor and can not get the not present when I am present straighted out even though I am just over six feet away. Also very interested in your upcoming zigbee video! Keep up the good work!

Did you ever try the adaptive lighting integration (HACS)? For the bed sensor, you might take a look at Withings, with lots of added sleep and health data. Isn't every day a rainy day in the UK?

Thanks for the round up, it is nice to see content about withstanding the test of time. I decided on the aqara light switches after watching your video. My only issue with a few of them is that they don't report their state to Hass. I can control all via Hass my if someone manually turns them off or on, they will not update Hass entity with that. Do you experience the same issue?

Insight that the killer app for home automation is light control is somewhat unexpected but I guess it makes sense based on how many automation pros say that it is theirs as well.

When I added CAT 6 cables I didn’t have to rip up my walls. Mind you, the electrician that did it could do it from under the house. Is that not an option for you? I’ve had a great experience with my Withings Sleep Mat too

Difference in defining a spouse, I use "The woman that has been shacking up with me for the last 52 years" as you use "Partner", I guess it is the same! Oh, for the bed monitoring get a single zone Presence sensor and mount it in a location that will only see the bed area, that may do the trick. Great video, again!

Curious on the blind motors. I too do not have power there, but looked at solar powered options. Would you recommend a particular solar powered version of the motor tubes?

Please do that force sensitive bed sensor.

Can you review the Heatmiser too, not much info available for these yet

I just received a 220 cm wide blind for my living room window, with an Aqara window driver, the one that isn't called E1, and it looks like a drop-in replacement for your Zemismart things, but mains powered as opposed to battery powered. Have you checked it out?

I know what you mean about batteries, I have 63 devices with batteries. Most are Ring devices as sensors for all of my windows.

I've had a bit of trouble with Tuya devices. Getting them to work locally through the developer platform was basically black magic, and then they killed the API which bricked my local tuya functionality. I'll be avoiding them in the future.