As a writer, I have to say that the concept of "I watch their videos and it motivates me to do x, y, and z" is actually a good thing. Contemporaries motivate each other. Writers are influenced by other writers all the time. Don't shy away from people who inspire you to do stuff. Keeps you moving.

Great vid Remember, if you have a lame 2 roller mill, you can roll the malt twice. You will get better malt if it whole and you roll it yourself. Some maltsters put the crap malt in the “already rolled” bin cause you can’t tell things like plump after it’s all crushed. Also malt lasts fresh a long time if it’s whole - not so much after it’s crushed.

I love the DIY aspect of these videos. I'd like to see more of that, it inspires me to tweak my system every time. Also, my mill is my favorite tool I'll never get rid of it! Thanks for making more videos. Cheers.

Don’t forget to check Home Depot scrap wood pile. Odds and ends from people that have their wood cut down in the store gets tossed on a pile and sold for pennies on the dollar. Just find a piece the size you need.

Love your videos, we are lucky that the brew shops in Colorado are open, got a good one we buy from and they let us mill on site for free, no matter the quantity or time we take. Eventually we will out grow them, but it's a awesome thing they do for homebrewers

I found a great home brew and grain store about 20 minutes from my house. They sell most grains for $2 a pound. They’ve ordered me rye and 6 row barley in 55 pound bags for $85 a bag... And the mill it as part of the purchase. Great deal. They sell a 2 roller home mill for $125... But I figured why buy it if they mill it for me.🤷‍♂️ But I realize a lot of people don’t have a good shop near them. Cool video. Solid advice.💪👍🥃

Got my mill, time to start buying grain in bulk once I use up all my kits!

I have one of these Chinese Mills with a motor and it works great (hopefully the motor doesn't burn up). It's a little slow but it does the job. I mounted it to an Ikea cabinet and the Home Depot buckets fits right inside and there's hardly any dust. Also in case you haven't noticed Northern Brewer is charging $3.00 to mill your grains, so it may pay for itself eventually.

“Subscribe to our channel if you think Carol Baskin killed her husband” - I think you just earned yourself a loyal subscriber sir

Thanks for all the great vids, I use RO water too and would like to see how you punch in your water chemistry on Bru’n Water. Definitely favorite brewing channel right now.

Glad to inspire brah!! Definitely recommend your own mill!! Nice tips!! Cheers!!! 👍🍻

A year on and I'm literally in 7 day quarantine so I'm rewatching as many HB4L videos as my brain/eyes will allow

Great Vid! Keep it up...keep on keeping on...brewing on. You get it. I digress.

Near the end you mentioned some mills dont turn the other rollers, is that because those adjustment knurled knobs are resting on the wood? Should they be in contact with the wood? Id think theyd need to be free and clear hanging in space, to be adjusted...

Way to go Braj! Cranking some good content!

Hey guys, love the videos, does it matter what RPM you're running the drill at? Will any corded drill work? Thanks

Brahj Mahal you have been on a tear... Keep it up!

I do biab and use a corona mill with a 1/3hp motor mills grain fine which is best for biag

Milwaukee for life bro

I was looking up a mil and we have recently got a kitchen aid mixer. there is a 400 watt attachment to mill grain for $99. Think that could be a good version?

I learn something new every time! Love the corny workhorse fam.

Would love to see a home brew aint dead shirt. That’s the absolute truth braj

respect as always bruh... but did u get that new zelda game and so was it worth it?

What do you do if your roller keeps getting stuck do you have to oil it or something?

HB is not dead! cheers!

thank you, sir

I work for a company that does sheet metal fab with cnc cutting machine...would it be okay if I have them fab me a hopper?

I've nipped my finger under the rollers and it wasn't pleasant I can tell you. That ale was renamed a "blood red" ale for reasons other than color

Good one Fam!

good shit fam

When I saw that Cat lady Kidnapper, I killed myself

I gotta hop on that all grain brew bus

Year later - yep, still in quarantine!

Seen nearly a year later. Still quarantined.

I knew you were legit when I saw that tool belt

when you and the crew can get back together for a brew day, you should do a BIAB vid with the MegaManX soundtrack in the back.... k? k

CHECKOUT OUR PODCAST! kzfaq.info/love/PnbjrHhr3618ywTtRrzmWw

You should do a video on a DIY jockey box.

my name is Grandpa and i recently retired and i love Beer

Beers not dead, no it's not!

In INDIA if you take grains to mills it would be 10₹ for 2lbs i.e. 0.13$ for 2 pounds

Why not just mill your grain at the homebrew store?

Haha like that battletoads sound effect! Old school #NES

Liked this video before I watched it

How would one mill their 50lb bags if they didn't have a mill?

#CHILL

.... and here i am waiting for my bread dough to rise

I use that hand crank, ALWAYS. You can't get 27" forearms using a drill, brah.

If anyone knows anything about the engineering behind how these mills work, are adjusted and produce what it is that you are expecting from it....you'd buy the 2 roller mill...the extra roller does absolutely butt nothing except get in the way of one side of the crush....your choice though, cos as it does nothing of value, it also does not do anything fundamentally different or negatively from that of a 2 roller...the true difference between the 2....they both crush grain...that's it

Shout out speed square braj!

You should sell that wood on craigslist! You could make millions!

When I make it back to the states I'm gonna drive by beer your house! No glass though. That's dangerous.

I just made sourdough bread

Monster Mills are American made. Just throwing that out there.

Battletoads pause music represent.

If you are willing to spend the big bucks, and want the Bentley of home mills, check out the MillMaster Grain Mill from MashMaster in Australia. It's expensive, like ~$300USD plus shipping and taxes. It's a 2 roller mill, but it uses fluted rollers instead of knurled, and they are both gear driven, so when you apply power to the shaft to power one of the rollers, a connecting gear powers the 2nd roller as well, so you don't get ripping and tearing of grains. I'm still saving up to buy one, stupid expensive, but it is what it is, and like you said, they last forever. www.mashmaster.com/p/4571858/millmaster-grain-mill.html Here is a video of it in action (powered by a motor) > kzfaq.info/get/bejne/lZlhiqicqJ_QYKs.html There is also a new mill from Keg King, also in Australia, but it's only $150, has 3 knurled rollers, the top 2 are gear driven though, so it has the same benefit with the gears as the MillMaster. www.keg-king.com.au/maltmuncher-grain-mill-3-roller.html.html Video of it in action: kzfaq.info/get/bejne/rZicqZd7r73dqXk.html

Great energy hbfl. Bitchin

Salmon of capistrano 🤣

Carol killed her husband. Nice table! Great info on milling the grain.

Thumb up for Mega Man

I close my eyes and hear Nicolas Cage

I want to waste my whole WEEK making sourdough bread!

A year later...

Both channels you mentioned are doing a lot of talking. Love the tips but let's make some beer!

I won!

wow. more than 100dollars for a used one, i'm stuck in china and buying stuff so i can brew back home in europe... i found a brand new one for 30-35 dollars

In one day? Ur getn more productive than face mask designers..

Seriously are there not threaded holes to bolt this to a base? One would be better off using those than resting it on your stops. Also there is a reason why the commercialbase covers the entire bucket....grain dust is absolutely not good for you to enhale. Just cover the bucket yo

See woman, downvote, leave