I have the Vevor. It's not as bells & whistles, perhaps; that said, it has the recirc pump & arm, auto & manual mode, adjustable power (500-1800 watts), all the stuff the bigger boys have. It works, works just fine. I'm happy I spent under $300 for this machine, that does exactly what Brewzilla and grainfather do at a much higher price point.

Long-time listener, first time caller. CH, started brewing again about 2 months ago after a 7 or 8 year hiatus. Upgraded from partial mash to biab, and from 5-gallon batches in the kitchen to 10-gallon batches in the garage. I’ve been re-energized to get back into it mostly due to your videos (and a couple others, Trent’s channel is great too). You keep it light and fun, and like you, I’m DIYing everything I can. Much appreciated sir. And thanks for turning me on to Kveik - it’s a game-changer. I’m up here in Nova Scotia, just built a little hot fermentation chamber with an Inkbird with scrap lumber for under $100, and I just finished fermenting a pseudo-lager at 98f in 40 hours. I’ve made 4 batches so far, and it’s fcking dynamite with no off-flavours that I can discern! Keep the videos coming bud.

One vessel to rule them all!

Between this channel and the clawhammer system, I got back into brewing. One year later, I am brewing like its 2016 all over again. Thanks Braj!

Bought the Vevor system 2 weeks ago. 2 brews in and I have no complaints. Easy to use built in pump and recirculating arm. For a 110 system it gets my 65 degree tap water to mash temps in 20-25 minutes. After sparge it gets to a light rolling boil in 25-30 minutes. All for $269.99 plus shipping.

Dude! Finally someone puts a video out with no BS. THANKS MUCH!

The VEVOR system is simply a rebranded Hopcat, Brew Monk, Brew Devil. I own one here in Kenya and it's pretty much the equivalent of a Brewzilla, though I'd say the Brewzilla is a bit more intuitive. So yeah, it works just fine, and $300 is the going rate for those types of systems. If I was in the US though I wouldn't buy one, but overseas it is about the only thing you can find affordably.

Good to see you back brewing again. I have the Anvil 240v 10.5 gal system and its a great value.Perfect for brewing 5 gallon batches.New one has a removable bottom on the grain basket which makes cleaning a breeze.Get the pump and chiller addition if you buy this system If I had the $$$$ I would have gotten the Clawhammer system,also excellent.

Great Video, CH! Keep 'em coming!

Good video with some great info from years of brewing. When I get some extra cash I'd love to get one of those Claw Hammer setups. For now I am forced to stick with "propane, propane, let's light that flame" and my kettle. I pretty much brew for parties and myself these days so 5 gallon batches tend to last a while, which I'm not complaining about. Now that winter is around the corner I'm getting ready for a lager. I've been wanting to get one of those done for a while now.

CH I found your channel a few weeks ago, watched a ton of videos since, learned a brajton and am going to have my first ever brew day up here in NH in the next week or so... still sorting out how I'm going to keep my ale yeast happy in this already cold weather (NH) since I'm still in the $150 braj category just wanted to say you're still reaching the noobs like me and i've found your channel both entertaining and inspiring... so thank you!!!

Great to see you back in the saddle CH. Always chill and the master Braj

Just got the 20gal clawhammer system and never looking back with 2 13.2 gal kegmenter. Thanks for all your great advice and sharing your knowledge!

Of all the single vessel system I have brewed on and/or owned, nothing comes close to my Brewtools B80. It will last all of my brewing career, every part is exchangeable, it’s modular, premium quality and just works every time. It does not make me a better brewer, but it makes me a happier brewer:)

I will say that I really enjoy brewing 2.5 gallon batches BIAB on my stovetop. No pumps, no re-circulation, no plate chillers to clean, no electronics, nothing heavy to carry...just basically a 5 gallon pot, bag and an immersion chiller. (Okay, I do have a ferm chamber and kegerator and other equipment around.) I also brew 5 and 10 gallon batches, and those feel more like work...but do produce 2x to 4x the beer. The Clawhammer seems like a decent budget level modular system, but if I went electric I would likely spend half the money and get an Anvil Foundry that can be used on both 120V and 240V. Clawhammer does not have that flexibility, and the 240V Clawhammer is $1,600. But there are a lot of great systems out there these days, for a variety of needs and budgets. Keep brewing!

Dope video, bro! I've been using the Claw Hammer systems for years and absolutely love them! So easy to use and clean. the 240V big one is a freaking game changer!

So entertaining. The insert at 2:41 had me laughing and giggling. ha ha. Back to the show. So funny. Thank also, because I have watched a lot of channels on beermaking and you guys bring it together like BOOM! Super insightful video, and due to the comment stream you initiated about VEVOR I am going with that. Thanks so much!

Welcome back Bro ! Of all the home brewing channels on KZfaq, yours is one of the best ! Keep brewing and make more videos !

Agreed on the clawhammer system. Been on it for about 4 years now and it’s fantastic. So easy to just replace parts if they break.

Always good to see a video from you man, hope you're still enjoying TN... I gotta get me one of the Clawhammer systems!

I just stumbled on your channel because I've been wanting to get back into homebrewing recently after about 6 year hiatus. You totally sold me on the Clawhammer system. I rocked the 3 tier cooler/Blichmann kettle system for ages in the past and it was such a pain. With the harsh Canadian winters the Clawhammer will be perfect. Looks like my old system in the garage will continue to collect dust. Looking forward to watching more of your videos! 🤘

How much do we love your content....hum....let us count the ways. Truly, amazing job, CH...2024...let's do this!

Awesome video man, I brew on an anvil system and I think its awesome. Definitely a step up from the cooler brew days on my old propane system. XUL makes some good beer! Funny I'm watching this while wearing one of their shirts, can't wait to get back down there to get more of their beer when we go on another lake trip next year!

Keep going man, this stuff is informative, entertaining, and awesome! Appreciate ya !

Great video. I got a Vevor system because, money. I spent all my extra cash on building my keggle system. I watched a couple of dozen videos on the expensive ones and they are nice and shiny. The Vevor does everything I need it to do. Does it heat the water to mash in temperature? Check. Does it keep it at that temperature? Check. Does it recirculate the wort? Check. Does it boil the wort? Check. Can you use the built in pump to transfer to the fermentation vessel? Check. Haven't tried programing it to automatically brew yet. Why? Because there's no fun in that. Did spend the money I saved on grains, hops, and yeast though.

Thanks for making this video man. I really needed it too. I’ve been distant from brewing for almost a year and it sucks. Hopefully I can find the motivation to fire up the old Brewzilla soon. Cheers.

I made the swap to one kettle. Never been happier! Got me the Claw Hammer 20gal/240v and it has made everything so much better

Damn my Braj. I was at Xul kill the lights and thought it would be cool if I ran into you. Had a great time, great beer city.

Looking great CH! Awesome Vid. Hope you are enjoying the East coast! 🤙🏻

Love your video. I do own a Crafthardware system that is similar to your Clawhammer one, but I sunk waaaaayy to much money in Tri-Clamp accessories. I love to be able to not switch a single hose on brew day and just control everything with my valves... But regarding the high price systems, I do love systems such the Speidel Braumeister or the Brumas Braueule. Especially the Braumeister with its compact size, the ability to replace parts and the way the system works is quite intriguing. But not the price.

I have a system that seems similar to the Vevor one. The main recurring issue I have with it is that the pump can get clogged by hop gunk or similar during the boil. Makes it a bit harder to transfer to the fermentation vessel. Luckily there is the faucet on it as a backup.

Good to see ya bro

I have the Vevor system and it is actually just fine. As with any single bottom thermometer system keep an eye on your temps. I use a 2nd thermometer towards the top of the wort and adjust accordingly. But really for the money I think it's a pretty great system.

I have a M&B that I primarily brew on in the winter months here in Upper Michigan & never had an issue w/it. And I still use the cooler brewing method w/propane in the warmer months. Love both systems, it doesn’t matter what you use clean up always sucks! 🤘

Small 2.5 gallon batches on the Brewzilla then ferment with a plastic 3 gallon Fermonster. Great way to try stuff that you don’t want tons of. I love the 2.5 gallon kegs too because i can stack em in the keezer.

Solid Vid! Not sure how much a Brewzilla is in the US but its by far one of the most popular electric systems in Australia, its relatively cheap and is aweseome.

One vessel to rule them all braj... always glad when you post. The Anvil Foundry has been TOUGH to beat. I even ferment in my anvil, post brew, and it turns out killer every time.

Love it And Missed you Weee need 100 Videos more ! ! !

Hey man it’s good to see you back in the game! Keep on it Braj

I have both the Foundry and Clawhammer systems, and you can't go wrong with either. Glad to see you back and brewing, Braj!

I've been using the Anvil Foundry with Recirc pump and Arm. I've made a few modifications like have it on a dolly and ditched the top grate in lieu of a plastic sparge nozzle. I'm also running it at 220v and use a Brew Bag for the grist. Having done No-Sparge for years, the jump to an All-In-One was pretty much seamless. I almost always double -batch and have at least 45 batches through it since 2021. For the price point and simplicity, the Anvil exceeds the value IMHO

Great channel! I appreciate your style of videos, sharing some knowledge, and having fun. I like all the pros of your claw hammer system but CH, Hans, Bubbe, do us a solid and show everyone how to replicate a clawhammer system on the cheap. I have to imagine a $1K system is not in the price range for most of your viewers. Think Chrisfix, show the cool stuff but then fix the car in the driveway with basic tools. Break out the knockout punch and go over no weld bulkheads for tri-clamps. Show the different heating element options, especially 120V options, and run multiple 120V elements on separate circuits to get a faster boil. They make heating elements with tri-clamp fittings and twist locks making it super simple to clean the pot. Make an SCR to control the temp with a dimmer switch or an inkbird controller. Show people how to reuse what they have and add a few minor things to level up. I love the no-chill video, add in a cut to that so people see they don’t need a chill plate, let it cool and ferment in your corny keg. Do you really need a pump? How much efficiency do you gain? Is it worth the cost? Show the sexy blonde supermodel but don't forget fat bottomed girls make the rock’n world go round.

I just recently downsized to 2.5 gallon batches myself. I seem to be the only one drinking it anymore and I can brew more often and keep the styles changing more often with smaller batches. I went with the Anvil Foundry 6.5.

I have the vevor its great, makes 6 gallon batches with ease, heating coil is interior, pump built in but easy to clean, ithink the grain limit is 17 pounds or maybe 19, I forget I had to move after I got it, the voltage is adjustable also, all you gotta do is find out how many amps the circuit breaker has. 30 amps means you can run it at 1800 watts

I’m with you man, I burnt out my Grainfather twice. I really wanted to buy a Clawhammer since I love those guys but I couldn’t justify spending 3X the price. Love my Anvil now

Batch size was the motivation for the larger systems in my case. 5 gallons of beer is 2 cases. Given those numbers I started from that baseline and built on that schedule to create a a uniform timeline for consistency. I used to brew every two weeks for multiple reasons and the result would be 2 cases of beer at minimum, but usually 4 cases of beer was an easy upgrade. Brewing 10 gallons takes no more time than brewing 5. I have 4 brothers in law and other family that will help should I not be emptying the kegs or bottles in a timely manner. Cheers.

The main advantage to the Grainfather system is the ability to create a recipe and just brew it without needing to set timers or mess with valves, start pumps, create a brew-day checklist or hit buttons to change the temperature manually. The app also allows you to monitor temperatures and timers from another room if you need to step out. The brew delay/pre-heat timer is nice too. None of these things are somthing you can't really live without, but it definitely makes for a seamless, convent process/ brew-day. Honestly, I'm not sure why more brew hardware manufacturers don't integrate a similar concept/structure. It seems like an obvious next step in the evolution of homebrewing.

Live in Mass and have a Mash & Boil. The main thing I don’t like about it is you need an external sparge water heater. What I started doing was just mashing in my cooler again. The M&B is my HLT, I mash in the cooler, fly sparge into a plastic bucket, then boil in the M&B. Nice thing about this setup is I can fit 24-25lbs in the cooler, so I can brew almost anything I want.

I just got the Vevor for X-mas and will be trying it out after New Year's. :)

I love my 10gal Clawhammer 240v system. Super easy to dial in my temps and clean after use.

I’ve been using the Mash & Boil 2.0 now for a little over a year. Thermometer is within +/- 5 degrees, I check it frequently because of a few reviewers who’ve had similar situations to yours, but love it! When this goes though, leaning Clawhammer for the next one. Good recs as always though CH!

Nice summary. But I would get a big plate chiller. I have the bigger Blichmann and it kick a##.

Legit bro, this video is what I needed. I am in the market for a system, and had no idea what the heck to get. Thank you for simplifying the BS.

I brew 3 gallon BIAB batches on my gas stove. I may get an Anvil Foudry 6.5. Black Friday sale! Thanks CH! Cheers!

Love it! Keep up the premium content and advice! Much love braj!

Looking forward to more videos, dawg!

I just brewed on the Vevor system. I think it’s pretty awesome for

Living in east tn as well, its hard to go through a 5 gallons of beer by myself. I do belong to a couple of home brew clubs. But, there I can only get rid of a 1/2 gallon or so. I currently do about 3 gallon or less now. I have considered the anvil foundry for some time. I may get it this year.

I've been doing 1 gallon BIAB batches in a Gigawort for the last few months and love brewing that way. I'm considering the smaller Anvil Foundry so I can scale up a bit, but you can't beat small batches for experimentation and increasing frequency of brewing. Thanks for the video!

I got the cheap S40 Grainfather and love it, made about 300 gallons on it so far. I can't stand connecting my phone to stuff like the expensive units.

You are funny and your videos are appreciated 🤙🏻

I've been brewing on the Klarstein equivalent of the Brewer's Edge system, the temp control is a little janky but it's been working great for me, I can't complain for sub £200. I'm looking at replacing the electronics to something with WiFi and PID control eventually but it hasn't annoyed me enough to bother yet.

Yea man 100%. I stopped for a while because it was so much work brewing out back with propane. Electric in the house is my next move. Hot side enhancements make brewing easier but cold side imho is still more important

Well damn i got the anvil foundry because of some of your videos but now you put clawhammer at the top! Maybe i shouldve waited 🤔

Moving across the pond to the US soon and had to get rid of all my gear that i cant justify the cost of shipping. Now I need to make a wishlist 😄

I wonder if I could use the anvil foundry grain basket in a large kettle on the stove top. I wish they just made metal grain baskets that would fit kettles so you could do this right in your kitchen without having to buy a full system. I think we just created a new product CH

Great video.

Missed your content, braj. Looking forward to more vids and beers.

After 15 years spent from counter top. To biab tier system in coolers.. from there to the anvil. And recently to the braumeister. I am keeping the anvil around for a few reasons. I love the quality improvement, simplicity cleaning etc! Now I have 2 kettles 😎

I have a big 3 vessel system and its been ok to me. Refitted maple syrup drums as kettles. But I also have the Grainfather S40. No Bluetooth or bells and whistles. But costed me all of 440 dollars, taxes included. Canadian. If it blows up in a year or two, ill see again. So far,so good.

Been on the Anvil Foundry for the last few years. Love it. Really dialed it in. For me, the process is more important than the system.

I'm still completely manual. Mash in a homemade cooler with a bazooka, manual vorlauf. Boil in a 30L kettle with a Lauter Helix. Cooling with an immersion chiller or "no chill". The only fancy stuff I have is a Fermzilla All Rounder so I can spund. That was a great investion and also allows me to easily make oxygen free transfers to a keg.

I can't wait to see and read about the PB and J sour might get me back into sours

I use the vevor system and it seems to work fairly well. You do have to check on your temps though its about 6-8 degrees off. But everything else is fairly straight forward.

thanks

The pump on my Grainfather did go out. I just bought another one and now it's working fine

Love your vids CH and if your talking to the Clawhammer boys get them to start shipping to Ireland as I really want one

When busy and or lazy, usually both, I like getting pre made wort from local winery that makes it and just add yeast. Bam 2 weeks later good beer!

I came back to homebrewing after a few year break, dusted off the clawhammer 120v, everything still worked and all I had to replace was an O ring on the element.

I'm pulling the trigger on a Brewzilla Gen4 in about two weeks. My sous vide stick served me well but I'm glad to upgrade from it lol

I bought a used BrewTools b40 and I have to say- there is something to these overly expensive systems. I now use my mash and boil for sparging and it’s crazy the difference in technology. If you’re ever in Chicago and want to test it for fun let me know. 🍻

Man, ive never felt so indy as i do right now, getting into biab about 8 years before it was cool. I get about 83% mash efficiency (milling my own grain) - i have NEVER understood the mashtun recerc hassle just to save $1.02 in grain and bragging rights that you hit 90%+ eff. You can keep that title im good. Grwat vid going through all the various systems, i enjoyed it.

You'll have to pry my propane burner, brew bag, and turkey fryer kettle out of my sticky, wort burned, dead hands.

Because of this video I'm going C-hammer 20gal. Thanks braj

Still rocking my Anvil, but always dreaming about the Clawhammer setup.

I still like my clawhammer 10gallon have about 65brews on it so far no issues besides a pump failure. They replaced no charge

I do like the concept of the clawhammer systems! $999 is a little out of my league, though. I use my $400 brewzilla or sometimes the old school home depot mash tun and propane Burner. Electric is nice but more of a pain in the ass to clean

I've already sunk a ton into my 3-vessel keggle system, so I'll be sticking with it for a while, but man I do covet the Clawhammer system. I do like pretending I'm a professional brewer, though.

We need a video on that pb&j sour!!

If my Anvil ever breaks ill fork the cash for the clawhammer. WTBS Having the option to conveniently switch back to 120v is clutch if you move around a lot.

nice double dragon background soundtrack bro! haha 🍻

Love your work, I only brew 5L to 9L batches (breaks out calculator, 1.3 to 2.3 gallon) but still havent found a good small electric system in Australia yet so still doing propane BIAB.

Yup... brew commander failed right at flameout this weekend and no friends either lol

VEVOR system is simply a rebranded Hopcat, Brew Monk, Brew Devil ,Guten, i have had one 8 years , it makes good beer , insulate it and when unto mash temperature turn down to 500 or it will over shoot

I have the Anvil 10.5 and its a little clunky cause the grain basket kinda sucks so seeing that Clawhammer steel mesh basket makes me jealous. I don't have too many friends that drink, but I run two 3-gal kegs in the like $100 tiny chest freezer i converted to a keezer and one of those kegs will last me about a month or two. Beer or two a day-ish + the occasional friend/wife pint.

BIAB brewing on propane ain't bad, though temperature control during the mash can be a bit wonky.

I’ve used the vevor. Honestly not bad. Under 500 they are pretty much all the same.

I noticed you didn't mention the Brewzilla. I'm taking a hard look at that one as well. I love the clawhammer, too, though. Tough call for me on which to get.

You missed the Digiboil system whichbis cheaper than anvil and works great. I have had it for 5 years with no problem.

Summer of 1970 I didn't buy any brew equipment other than a nice bottle capper I had gotten for 16 dollars.It was top of the line. At 14 I was always trying to think a head. I used all mom's stuff from the kitchen. She didn't mind she drank all the beer. If it makes you happy but it. 7,000 system to a 100 dollar one.