Good work Jon. I love the telephone pole landing, gave me a chuckle. Pam and I will have to get up there again sometime soon for a visit!
@jjohnston943 жыл бұрын
Getting those poles to land right where you want them to is a real art form. Should've hired a kid from the local lumberjack college.
@seeharvester Жыл бұрын
Ha Ha Ha ! Now that's funny!
@jbcokes Жыл бұрын
I can’t wait for the second video! I am trying to build a 40 telescoping tower too. This helped me a bunch.
@seeharvester Жыл бұрын
When is that gonna be?
@TheREALJosephTurner Жыл бұрын
Enjoyed the technical content of the video, as I'm looking at building something similar. But what made it particularly enjoyable was that the photobombing cat and the missed cardboard box wasn't edited out!
@royalaxe2 жыл бұрын
3 generations there manipulating the mast.. great to see. ive watched all of the Aplane videos, not so much to make, im getting too old for that, but to appreciate the effort you put in. thankyou very much Jon.
@Lancaster73 жыл бұрын
That wood pole landing reminded me Wile E Coyote planing...
@ShaneKA5GSS Жыл бұрын
Couple questions: how are you going to prevent the inside from rusting and where did you ground it
@jefferyrightmire9520 Жыл бұрын
The best welder / fabricator of any material lives near Crockett, Texas. ♫ J.J. Rightmire ♪
@grubbb Жыл бұрын
Great video! Nice to see the bat house as well!
@johnreed88723 жыл бұрын
Hey Jon! Thanks for the video on this topic , I'm going to be starting a 750 STOL after the first of the year. I live on 50 acres in SE Ohio. I'm not sure what is more challenging, getting my shop/ garage ready , or preparing a suitable grass strip. Although an antenna isn't quite necessary , it sure would be nice! Great info , Thanks! Blue Skies!
@johnreed88723 жыл бұрын
I'm thinking , combination radio, weather and wind sock... The only thing that I would have done differently than you, as far as removing the old one goes is, I most definitely would have parked a vehicle ( any vehicle will do ) just slightly to the right of the box! Thanks again!
@jimscruggs54002 жыл бұрын
Nice job. Keep an eye on your pivet bolts, I've had some brake on me
@TOTALLYRELAXED Жыл бұрын
Phase 1 was very impressive!..but, I shutter at the thought of how much money you spent to succeed in all of this! I am a recent GMRS licensee and will be putting up an antenna as well within the next few days at my house. However, it WON’T be as elaborate as yours is to say the least! Mine will be on a 20’ 1-1/2” pvc pipe with a UHF Fiberglass non-ground Mobile Radio Antenna, 70CM 400-470mhz GMRS Base Antenna 17 inches tall at the top. I’ll have two four feet pieces of rebar pounded in the ground up against two sides of the bottom pipe area and bound to the pipe via very strong pipe clamps. About ten feet upwards the pvc pipe will be bound to an existing old Directv mount already in place I used at one time for a tv antenna mount. With the antenna up and operational it should be approximately 21 feet high (or a tad more) to the top of the antenna from ground level. If I’m real lucky I’ll be able to hit all the repeaters in my area of north Houston, Tx [and there are many!] with my GMRS-50V2 50W 256 channel mobile radio being used as a base station. I’m also planning on using automotive wire looming around the RG58X coaxial cable from top to bottom to protect it from the sun’s rays also. Great video, VERY well explained, and, absolutely most interesting! Stay safe! ~Jim @WRXY695~
@josephsmuckatelly87679 ай бұрын
A couple of thoughts to consider. The winch is most powerful on the first wrap of cable. (least amount of cable for the job) Also you might think of using the equivalent of jumper cables to power the winch, (no battery to maintain) just pull a car up when needed.
@joeblow18442 ай бұрын
It has been 3 years, where is part two? Nice job by the way!
@randyguay7115 Жыл бұрын
Thats a nice rig. Looking now for part 2.
@markok.8440 Жыл бұрын
Excellent and all is clear. Thank you for really great and rich in detail video👍
@67csp3 жыл бұрын
Your video on Tilting tower was so informative. I would like to build one for my HAM radio operations, thanks for the step by step procedure. it would be great help if you can share the design sketches with us. eagerly waiting for the second part. Hats off to you. 73's VU2CSF
@HomebuiltHELP3 жыл бұрын
Hi Chandra. Thanks for the feedback. I am a little hesitant about the plans as I am not a structural engineer so there are no specifications for strength and durability. I borrowed from several commercial designs so I feel I am taking minimal chances. I also am a ham and this is my main purpose - but for low wind load antennas! Stayed tuned - for spring will be the time I finish off the telescoping part. Then I can provide more detail on what I did. Waiting for a better sunspot cycle to appear!
@67csp3 жыл бұрын
@@HomebuiltHELP Thank you for your reply. Sketches will help as one of my HAM friend is a Structural Engineer, hope to take his advice. will wait eagerly for the second part. 73's
@ON8EI Жыл бұрын
Nice to see myself on 1:21 well done on your work. JD.
@HomebuiltHELP Жыл бұрын
John, You were an inspiration to this project! THanks
@sarahjrandomnumbers3 жыл бұрын
3:21 Keep using sticks of dynamite until the hole is how you want it 🤣
@bethfarmer40403 жыл бұрын
Cool idea! Good job. See you December 4 in Lakeland (and it will be warm).
@nomoretaxes21662 жыл бұрын
I didn't see anything about grounding that tower, you should read the book written by HAM operator and author Ward Silver all about proper grounding. Otherwise that propane tank becomes more of a potential bomb being that close.
@HomebuiltHELP2 жыл бұрын
LOL Well, this ham operator did in fact drive a rod from inside the hole into the earth and attached a cable to the rebar cage - all before the concrete pour.
@larryjanson40112 жыл бұрын
even pro loggers can have problems getting a tree to land correctly, but love part 1. only thing i can say is you should have used a larger hinge pin for the tower base. aka: welded a pipe inside of the 4 inch sq tube, (adjusted to be 1/2 in on each side) to match up with the 5 in sq tube base. and used a 1/12 - 2 in bolt. with all the threads outside of the assembly as that could be a breakage point of the bolt. i kinda think over kill sometimes.
@cw2gtc Жыл бұрын
Perhaps not overkill thinking, but more along the lines of experience. The voice of experience speaking clearly, yet not wishing to offend the host. When the first monster gale force storm comes, and after the gusts die down he ventures out g to peek at his work- he’ll know!🤝
@seeharvester Жыл бұрын
I would have made the hinge assembly heavier myself. That said, I doubt it'll ever fail.
@davidwalle50253 жыл бұрын
Good video. If you want help on antenna talk to your local ham radio club.
@HomebuiltHELP3 жыл бұрын
Good thought! I have been licensed as a ham operator for over 50 years! Still so much I do not know...!
@the11metersd.x.channel.557 ай бұрын
Nice black cat . I have a special one just like him/her. That was a lot of concrete for such a small base. But you must follow the local regulations. Tilt and crank up has its problems if not regularly maintained. A Equalatiral triangle design is stronger and far cheaper to build in 10ft sections.. Giving you the tilt advantage . And you can upgrade in height ,If you build the base with upgrades in mind.. That said its a expensive business putting antennas in the air. Best regards HS0ZOU.
@HomebuiltHELP6 ай бұрын
Triangle design is nice but MUCH more labor/time with creating all those cross members with their ends shaped for the tubes, rigging, and welding each one. Every design is a trade-off! Thanks for your input.
@lufknuht5960 Жыл бұрын
I think I would drill 2 holes for huge bolts. Then insert at 2 locations pieces of rectangular pipe (also drilled). Then I would use 2 bolts to bolt the mast to the support pipe firmly. They would have to be loosened & bolts removed to raise or lower the mast. Also I might put a short piece of pipe bolted to the outside of the mast which goes down to the slab. Why did you not put the mast up against the wall of your building? You don't have a video of finishing the project? Thanks much for this video -- it looks like a beautiful & professional job.
@d.jensen51532 жыл бұрын
This is great! Gives me all kinds of helpful ideas wrt my own antenna tower situation.
@hymlog Жыл бұрын
....WOW ...Even The Box Got Out of The Way!! ...Smart Bow!
@jimnorrish55073 жыл бұрын
Great mast I need to see part 2 !!!!
@terryburge67632 жыл бұрын
nice job so far, Terry
@t2000kw2 ай бұрын
Is there a part 2 to this? I don't see any link to a part 2 and I know others besides myself would like to see that video. You did a great job with this. Was there a cost savings doing it this way instead of using a telescoping antenna tower that has 3 or 4 sections and a hand or electric winch/hoist to raise and lower it?
@jeffrobodene14854 ай бұрын
OK... I want one. Thank you for sharing.
@levinef Жыл бұрын
You should have a 6’ ground rod with a copper wire to the mast. Since this an airport, don’t you need a flashing light?
@KO4L_Lloyd Жыл бұрын
I loved thus. Awaiting part two..thanks
@seeharvester Жыл бұрын
This video is 2 years old. Don't hold your breath.
@jameyevans29 Жыл бұрын
Part 2 please? They sale rohn 40 foot towers for under a 1000. However the shipping is around 500 dollars and tilt base is around 400.
@JoshDaaang4 ай бұрын
This is amazing! Did you ever do Phase 2??
@jjohnston943 жыл бұрын
Well, I WAS going to say you have to pay attention to the power source on your winch. The one in this video was designed to mount on a truck, so it's 12V DC. I assumed it was going to be 120V AC, which are also available for fixed installations, but they aren't as plentiful or inexpensive. But for occasional use like this one, I suppose lugging a battery outside and hooking it up isn't too onerous.
@keithmiller73412 жыл бұрын
His biggest problem with the winch is spool size. With as much cable he has out I doubt the winch can do a 1000 pounds. Might be able to add a chain link to shorten the length of winch cable out.Maybe a 9 or 12k winch could work when he adds the extra section.
@jjohnston942 жыл бұрын
@@keithmiller7341 I didn't understand any of that. What I meant was that you have to make sure you're getting a winch with the right power source. If you want to hardwire it into hangar power, you have to get a 120vAC model. If you want to spend less, you can get a 12vDC model made for a truck, but you have to be OK with lugging a car battery around.
@shoa22855 ай бұрын
That looks great.
@rndmcnflct3 жыл бұрын
Looking forward to part 2
@googacct3 жыл бұрын
So part of the preflight check is to make sure the cat is accounted for and not sleeping somewhere inside the plane.
@mikez4844 ай бұрын
So anticipating phase two I can’t seem to find it. Can you link to phase Two as I’m interested in the mechanics of the telescoping mast. 3/28/24
@briarbenchhomestead946 Жыл бұрын
Been looking for the second part. I live off grid and would like to get a emergency jpole antenna up with my starlink.
@cw2gtc Жыл бұрын
Well, “2 years after the mast”, is project #2 coming out yet? The first was SO good!
@HomebuiltHELP Жыл бұрын
Yes.. some project issues created a temporary delay.... stay tuned!
@callmebigpapa3 жыл бұрын
I would have mounted it touching the propane tank for the inevitable lighting strike...... j/k ....great video thanks for posting!
@ShaneKA5GSSАй бұрын
Did y’all ever build the extension? Wondering how it was done
@BayAreaCowboy Жыл бұрын
I realize this video was made two years ago but I still have a question? I like the design except for how all the weight of your pole looks like it sits on the one pivot bolt. That does not look right to me. Wouldn’t be better to have that pole sit flat on the plate instead of the bolt once it it tilted up in place? Where is part 2 of this video? All the antenna towers that tilt up end up sitting flat on a plate after they are tilted up. Why would you rely on that one pivot bolt to hold the entire pole up? This could be modified a bit by hinging the pole to a larger base plate so it sits flat on the plate when tilted up. This way you don’t rely on the bolt to hold it up. Would like to see part 2 and how this holds up after a few years.
@HomebuiltHELP Жыл бұрын
I can answer - but first, please tell me how much weight a 5/8" bolt (grade 2) can hold in shear (very easy to find - google this exact question or ask Siri). Please reply here!
@kevinbrister88013 жыл бұрын
That is a very nice idea and set up! What was your total cost for all the materials? My guess is aroud $2000 from start to finish??? My set up would have to be along these lines, All we are teying to achieve is high speed internet bcs we are in a rural area where the fcc could care less! We have 60 to 70 ft trees within 20 to 30 ft from our house! I feel like we are stuck in the ancient days of the electronic world.
@Eken-Eken3 жыл бұрын
I have one question/remark, Did you put a draining hole in the tower mount? as this is a rather needed feature but i didn't see it on any of the times in the process making and attaching the base plate. Just a ham with a question :)
@seeharvester Жыл бұрын
Oops! Maybe he forgot. I did. Easy fix though.
@mktwatcher3 жыл бұрын
Very nice work!
@stancoleshill8925 Жыл бұрын
In Canada you are looking at about $20,000 just for the one big steel channel. A 1 1/4 piece of steel tubing 10 feet long is over $100 CDN here now ! Absolutely rediculous! ! ! Same piece of pipe to build a fence is $16. PS: I would have used the phone pole myself. Such a waste ! Also, you could have moved the box over while the pole was falling. 😅😂🤣
@daviddahlgren9603 Жыл бұрын
Very nice , I like it !!!
@garyjones6303 жыл бұрын
i built a tower close to the one you are working with a 3x3x24' in side the 4x4x24 i used a hand crank to lift the tower or try to , to heavy was not able to lift had to get a tractor to help with lift. i used a 6" i beam for the lift pole it wobbled to much looked like it was going to fall so i just scraped the idea , to close to the house and the lp. tank . so watch the weight .good luck
@maxwellmc9734 Жыл бұрын
Nice job
@what950211 ай бұрын
What kind of winds can something like this handle
@voiceofjeff Жыл бұрын
You made reference to the tower being grounded through the rebar and concrete. That doesn't work. Proper grounding is never done through concrete. Lightning will blow concrete to rubble. Need to run six or 8 inch copper strap from the base of the tower out in at least a couple different directions to ten foot ground rods on either side of the concrete. This is how broadcast towers are grounded. (I used to own 2 AM radio stations!). Please ground that tower properly! Lightning damage is costly & more costly!
@MarkBurfeind Жыл бұрын
When will you release the second portion of this video? It’s really cool!
@HomebuiltHELP Жыл бұрын
Still in the plans to complete
@rudde72512 жыл бұрын
Where is the part 2? :(
@rt830213 жыл бұрын
I love the cat!
@prof.heinous1913 жыл бұрын
... and one final point, another advantage to a metal plane is it's no good for sharpening your claws!
@richarde7352 жыл бұрын
did you ever post the phase II video?
@briarbenchhomestead946 Жыл бұрын
Can I get a link to part du?
@brentjohnson66542 жыл бұрын
Great video. I have seen some tilt up tower manufactures state that no loads should be on the mast when cranking up. What has your research led you to believe on that subject? I may want to do a tilt over mast one day for Ham Radio. I am also a pilot.
@HomebuiltHELP2 жыл бұрын
"no loads should be on the mast when cranking up" Hi Brent, I guess I dont understand what a "load on the mast" is?
@brentjohnson66542 жыл бұрын
@@HomebuiltHELP it would seem they say don’t mount a structure on top of the mast prior to tilting it up. By I have seen some large beams installed sideways and tilted. These are instructions from manufactures not KZfaq opinion. But I don’t have a good handle on the mechanical structures of these antennas and am curious to know. Perhaps I should find a structural engineer or a good book. Thanks for your response. I am not trying to say I know more than you, this is an honest question. All the best, 73 de KI5HXM
@HomebuiltHELP2 жыл бұрын
I am only commenting from a practical point - I believe the whole point of a tilt over tower is to mount/maintain your antennas while standing on the ground, then raise them into position. You may be referring to the idea that there IS a maximum wind load (and also dead weight) that a given tower can handle at the top. That should be listed in the manufacture's specs.
@brentjohnson66542 жыл бұрын
@@HomebuiltHELP yes, I agree on the practical point of working it on the ground. I was surprised by a manufactures limit on that since to me that is the whole point of tilting. I have some learning to do at any rate. By the way, I am a pilot and a ham also! 73!
@garyjones6308 ай бұрын
it's ben a while since this vid. have you finished the second part 0f the radio tower ?
@petterstrand27003 жыл бұрын
Great job.
@wdsracer Жыл бұрын
When is the second video?
@CurmudgeonExtraordinaire Жыл бұрын
Well, at least the telephone pole did not end up landing on your hangar...
@joeblow8593 Жыл бұрын
Is there a part 2 ?
@whytebredd Жыл бұрын
part two when?
@larryhaney66082 жыл бұрын
I can't seam to find the second video for this antenna mast project .
@HomebuiltHELP2 жыл бұрын
Hopefully in a few months!
@hendog1439 Жыл бұрын
When is part 2???
@richardlively16663 жыл бұрын
Looks good Jon! but you probably should not have painted it. It will actually rust quicker with paint on than not, especially heavy steel like you are using
@aqeelalmnsory3 жыл бұрын
Thanks professor
@douglasRbrown2 жыл бұрын
Do you have a follow up to this video?
@MountainMan7.62x3911 ай бұрын
What did you use to cut the steel?
@jeffreyweatherwax68153 жыл бұрын
i wanted to see part 2 video
@lyleanderson6284 Жыл бұрын
Does your black cat fly with you? Might be bad luck...
@Lennymc39 Жыл бұрын
Part 2?
@bootloopgaming8642 Жыл бұрын
wheres the telescoping part video?
@HomebuiltHELP Жыл бұрын
Planning on finishing.... keep the faith!
@T2S2T2P2 Жыл бұрын
Great video. Did you ever get the 2nd video done?
@HomebuiltHELP Жыл бұрын
Still on the list of todos....
@Christopher-wr6yw3 жыл бұрын
Cat and Catastrophe! 🐱
@GhostRider.....2 ай бұрын
poles attract lightning and with a gas tank sitting next to the pole i guess doomsday is coming soon
@jhonsiders60774 ай бұрын
Please Do Not stand behind anything your cutting down! It can kick back many a logger has died that way I saw that and really hoped that would not happen ! Went whew when it landed . Old A&P guy here don’t think a cat can hurt good fabric .
@LawpickingLocksmith Жыл бұрын
Lol, nice fall....
@dgbivins2 жыл бұрын
Where is Part 2?
@HomebuiltHELP2 жыл бұрын
This next spring/summer 2022 hopefully!
@stevemitchell68213 жыл бұрын
Do you have the blueprints you designed to build this tower? If so i would like to buy a set from you.
@HomebuiltHELP3 жыл бұрын
I do not. However, when I attempt part 2 to finish this I think I will provide more dimensions so maybe a structural engineer can comment on its strength (or lack!)
@AvocaSingleTrack2 жыл бұрын
@@HomebuiltHELP Where's part 2 ?
@HomebuiltHELP2 жыл бұрын
Ran out of time this year... definitely planning for the next warm season!
@russellsmith38253 жыл бұрын
Kitty!
@DaveTheBigTomato Жыл бұрын
Old guys... They work easy, not hard. Take a good look, young guys. (That's how they made it this far in their lives) PS: Get a young guy to position the boxes when downing your next telephone pole...