“YOUR” the ONLY reason why I purchased both The Leverage and IM 2000 for my limited space and I LOVE ❤️ it. Your videos are the best thanks 🙏 for the in site and for-site of those Machines.

I love seeing all these hacks. It really helps stoke creativity even for those of us without a lever gym!

Learned all my hacks from this channel. Wasn’t a fan at first of the leverage gym but with these hacks I love it.

Thanks so much for sharing these. The Levergym offers endless options for exercises!

WOW, you're truly an asset for us. Such amazing tips.

Dude so much variety!!! Great content!!

Another great group of exercises. 💪

it's always interesting to see all the exercise possibilities on this machine, there are so many variations

Some gems in this one! Glad to see the red bench still made the cut😆

Love this content

That's a great tip connecting the the bench I spent 10 minutes trying to get the pin in I will slightly losen the bolt . Thanks

I’ve got a powertec lever gym! I will def incorporate some of these hacks into my routines. Thanks dude! 💪

Awesome channel man!

Fantastic. It doesn’t get boring. This was my favorite video so far.

The Hack Master is back at it! 💪

Can't wait for part 7!!!!

great stuff

Great video! These hacks can replace several dozen stand alone machines!

Good job. Lots of movements you can get done. SURE some are a little awkward to set up and maybe even the "feel" isnt quite perfect. BUT over all, if you want a good creative workout these things are perfect. Have a good day and a great week.

Thanks for another great levergym hack video! Any chance you’ll be doing any on the lat machine? I just did your setup for hacked cable crossovers on it today.

Another great video! I own one of these machines and love it. Question, how long are the cable extenders do you use?

GENIUS

some hacks i do on the multipress neck extensions with a harness attached on the leverarm, single triceps cross extensions small incline daisy chain single rope attached to lever arm from bottom with the opposite arm u extend across the body, kickbacks overhead extensions...., single lateral raises with abs straps attached on leverarmfrom bottom with daisy chains, single curls with daisy chain on leverarm feels amazing great peak contaction, seated curls with daisy chains faced away from the machine nice stretch to the biceps i sit on against the inclined bench i do even more but those are some

You are the only KZfaqr reviewing this

Is there any hacks for the multipress in the future? Thx for great hacks, I have the Tunturi level gym wt85 I can do some similar hacks on it thx to your videos 💪😁👍

00:40 feeling so heard with this one. Way to go, H!

I bought my powertec levergym in 2021 because of your videos and i wanted to thank you for making them! Is there any way to hack a hip thrust using the levergym btw? not sure if thats in one of your videos or not.

have you seen the Brute Force Australia Rapt lever gym? it looks really nice.

Great

Hi! Thank you for sharing? What king of cable extender did you use for ? Can you suggest me a link? Thank you man!

Your videos are great - thanks. I recently purchased the multipress machine based mostly on your review. I'm wondering if you have some hacks for the multipress machine as well. It would really be appreciated. Thanks!!!

Awesome ideas. What do you do on the belt squat to deload the weight between sets?

I cannot believe what I just heard-you feel the pump BETTER with the loading pin than the squatmax or Rhino?!! I wonder if it’s because the weight can drift back along with your torso?

Just wondering if you could us a neck harness with the high pulley to work the neck??

Love the hacks. I tried finding all your items used in the videos, but could not find them in your Amazon store. What are all the names for the products used and or links for the chest 5:46 in the video, daisy chain with d-handles, any more? What about the accessories used here? from 6:15 in the video? What is the name of the long bar connected to the pulley attached to the lever gym? Thanks

Man in your opinion that two hooks near the high cable are intended to be use like a pull up system? I mean with the long bar, because they seems to be a lot sturdy and thicc to be only use for bar holding.

Which exercises do you still find superior on the Multipress vs the Levergym? Can the Levergym be just as good for incline pressing & chest supported rows?

Great hacks video once again mate! The fact that you have made it to part 6 is testimony of both how so very versatile the lever gym is and on how well you can approach the machine and work all these hacks out. I am sure you can even figure of a part 7 given more time! In this offering particularly like the refinements on the neck hack and the seated calf raise. Very well done to you sir. I do wonder if powertec started the lever gym design with the prior knowledge on it's sheers potential versatility? Or total fluke beyond the fundamental movements it is shown to do directly from powertec? Perhaps somewhere in between the two? What are your thoughts bud? Also to answer your question, like like lever hacks part 1 as this led me to this Chanel. I do however like all of the offerings in this series. I can vaguely recall part 2 and/or 3 also being very useful in particular. I am leaving a collection of information to leave my son should, God forbid, anything happen to me before he is old enough to learn from myself directly. Other than that, just for my own refreshment of information every now and then. BS free weight training and nutrition advise being just a couple of these subjects. That said I will watch the 6 part series over again later as I am not working today. I shall probably download them to add to the collection so the powertec levergym's full potential can be seen. A wonderful single station piece that is great as a stand alone machine for people with a minimum of space, and a perfect companion in my opinion to either the bench attachments or for the convenience of a weight stack, a body Solid G6B. A two station powerhouse machine home gym setup. Many thanks for your good work and for sharing for findings on the levergym. It is greatly appreciated.

Hi Can you kindly tell me Where can I buy that harness on your shoulders?

what size steel spring snap hook's are you using for the cables?

without the R your tshirt would be cool :)

Hey HGHR, I have a used Levergym thanks to your vids. I have I think the mid range model, before the band pegs but it does have isolateral arms. Does the newest version have the small welded bracket across the upper pulley? I find mine limits the angle of the motion since it drags across this bracket. Thanks!

In your chest press section, what is that horizontal metal piece called? I can’t find it in your Amazon store

Really hope this series goes 8. #theocho

Great video as always. Here’s my dilemma: trying to decide between the levergym or the multipress. I already have a high low pulley. But like the squat feature of levergym. I only do incline presses - so here’s the question: 1) levergym or; 2) Multipress with stand alone Leverage squat machine? Thanks much!

Today I tried "Zurcher Squats" for the first time in the Lever Gym 👍 ................PS I have cut the squat pad off my lever gym

Hi can you share what size are your cable pulleys? Thanks.

One of the first things I did with my lever gym was cut that foam pad off the squat bar. It's fairly useless. I can low bar squat without any pad and for other stuff where a pad is desirable, like the seated or standing calf raises, curls, etc., a stardard contoured removable bar pad works way better. Is the calf raise block used in this video from the leverage squat machine?

I ideas for a seated chest press?

What thickness of rubber flooring would you recommend for machines like the levergym?

I have the same set up @ 6:18 but the d handle is hitting the back of the seat. I'm stuck lol

Got another question; I am limited on space. Can I use my Ironmaster bench with this without any weird issues? I know the Powertec bench connects in for stability, but I would chuck some heavy plates on the weight holders to help with that.

I moved and been looking at used equipment. Compared to other items that are consistently being sold, I don't see many Levergyms. I take how infrequently I see people trying to sell them as a great sign of people valuing their versatility.

Hey man got a question is there any way yo tighten up or make my powertec FID bench more stable on back incline no matter what level of incline i have it it feels very unstable and shakes ?

Powertec need to address the squat shortcomings, as in having to start at the bottom and if they didn't have the isolateral function (which I never use) it would be easier to design, as it stands I think the lever squat machine is ideal to complement this peace ............ BTW I have no issues with the bench press...I just do a slight incline .

Trade you my rogue set up for your powertec

Might wanna add links for some of those accessories so ppl can buy exactly what you have and get you a small cut. But then again I don’t know if it’s worth your time either. Not a KZfaqr lol

You should buy a rope, that wold makes something easier.

I enjoy your channel as I believe we think alike but I fear since I am not a Powertec guy and I don't own one Powertec piece that I will lose interest in your exclusive Powertec content, I get you scaled back, the money you were spending on those stand alone pieces was getting outragoeus. We all thought you are Wealthy, you may be but you've come back down to reality by selling off your almost whole gym but to go exclusive Powertec pieces, I don't get it, what happened. In the future, Are you only doing Powertec, if so, that is sad. I will still support you but Powertec does not get my juices flowing and my anticipation for your videos weaken knowing it will be about Powertec. I wish you well Take Care