HomeKit Alarm System in 3 Easy Steps!
Рет қаралды 64,653
Күн бұрынWe will create a DIY alarm system in 3 easy steps using ANY HomeKit sensors. The final product will allow us to toggle the Security System On and Off using the Home App or Siri. When the alarm is triggered, a loud siren will play on our HomePod or AirPlay 2 speakers.
View the Step by Step write up here: shanewhatley.com/diy-homekit-s...
Video Timestamps:
What You Need - 1:40
Step 1: Set Up Smart Plug - 2:53
Step 2: Create Scene - 3:50
Step 3: Create Automations - 6:08
Final Setup - 8:30
Recommended Videos:
HomeKit Security Alarm System Automations: • HomeKit Security Alarm...
Control Your Home with NFC Tags + HomeKit: • Control Your Home with...
Aqara Hub Setup & Review - A HomeKit Security System: • Aqara Hub Setup & Revi...
My Smart Home Setup:
Netgear Orbi Mesh Wifi System: amzn.to/2ObTAPh
NFC Tags: amzn.to/30Plnr3
Phillips Hue Lightstrip (requires bridge): amzn.to/2ZZwnH8
Philips Hue White Light Bulb Starter Kit: amzn.to/345xbb3
VOCOlinc lightstrip (LS1 IP67 Waterproof Rating): amzn.to/2LNCIfX
VOCOlinc Lightstrip (LS2): amzn.to/2M8Zeik
Apple TV 4K: amzn.to/2LtMFyS
Insignia Garage Door Opener: amzn.to/2LSWGoi
VOCOlink T-Guard Smart Lock: amzn.to/2O0WeXO
VidaMount Black On-Wall Tablet Mount amzn.to/30gNdkQ
VOCOlinc Flowerbud: amzn.to/2ndJrG2
VOCOlinc Wi-Fi Power Strip Surge Protector: amzn.to/30F9unK
VOCOlinc Smart Light Bulb L3: amzn.to/2IJHhpE
iDevices Outdoor Smart Plug: amzn.to/2PgiXje
VOCOlinc Smart Plug: amzn.to/2PgkyFH
iDevices Smart Plug: amzn.to/367dem2
Lutron Caseta Dimmer Switch Starter Kit: amzn.to/2RuWrlL
Lutron Caseta Dimmer Switch and Remote Kit: amzn.to/2FteGDh
**********
I'm a big fan of Apple's Homekit technology and am always looking for AFFORDABLE smart home options that work well with Homekit.
Subscribe to my channel for more Apple Homekit videos like this: kzfaq.info?...
Recommended Playlist - Apple HomeKit: Building a Smart Home - • Playlist
Let’s connect:
Instagram - @ShaneCreates
Twitter - @ShaneCreates
NOTE: This description may contain affiliate links that allow you to find the items mentioned in this video at no cost to you. As an Amazon Associate I earn from qualifying purchases.
Share this video with a friend:
• HomeKit Alarm System i...
#HomeKit #SmartHome #HomeKitSecuritySystem
@dindu42 2 жыл бұрын
This was exactly what I needed and I doubt I could have figured it out myself. Thank you so much.
@brandonballard11 4 жыл бұрын
Good idea. Now that the HomePod is on sale I will definitely have to set this up. I like that smart plug as a bridge idea 😜
@henk-janvanderwerf434 3 жыл бұрын
Hi Shane, great video! I used your automations and paired them up with the security system plugin in homebridge/hoobs. With the plugin you get a flashy tile in HomeKit you can set to “home”, “away” and “night” so you don’t have to use a (dummy) switch. It also provides notifications when it’s armed/disarmed and triggered. That was the big reason for me to choose for this plugin. You can also play sound and delay the trigger but I still have to figure that one out. Works perfect for me with the Aqara sensors and the siren of a Ring spotlight cam. Thank you for the instructive video’s!
@ShaneCreates 3 жыл бұрын
Thanks for watching! Yes, I’ve heard of that plugin and I’ve been meaning to give it a try but keep forgetting. Glad to hear it works well for you! I’ll have to try it out. Thanks for the reminder!
@Awoit Жыл бұрын
Do you have a write-up for this @Henk-Jan van der Werf
@chriscooper1686 4 жыл бұрын
This is a great idea..., You could even set it up to text you if the Alarm goes off and you're not at home. Thanks Shane. I'm going to set this up over the weekend.
@ShaneCreates 4 жыл бұрын
Awesome! No problem.
@eathenkelly7536 Жыл бұрын
Hi, how do you do that?
@peterbystrom6799 3 жыл бұрын
Excellent video! Brilliant idea using a dummy switch as a trigger for the Security system!
@ShaneCreates 3 жыл бұрын
Thanks!
@khadyoung 4 жыл бұрын
Excellent video as always. Just got my Aqara hub on your recommendation (and like a dozen door and window sensors). The thing is fantastic! It was a bit of a struggle to set it up, but after I set the region to Chinese mainland in the Mi Home app, I was good to go. I've already rigged things up so my AC turns off when I open a window and turns back on if and only if ALL the windows are closed. Sensors open up so many doors! (Horrible dad-level pun intended.)
@ShaneCreates 4 жыл бұрын
Khad Young thanks! And that’s awesome!! Glad you are enjoying your new Aqara stuff! I had a little trouble at first setting up the hub how I wanted too, but once set up, it’s been flawless ever since! Love those AC automations! 👍🏻
@myHomeKithome 4 жыл бұрын
Airplay 2 accessories as HomeKit accessories is really starting to pull everything together and Shortcuts is taking it even further. It takes some tinkering, but so much is possible with automation in the Apple ecosystem now.
@ShaneCreates 4 жыл бұрын
myHomeKithome agreed! So many cool things we can do when we get creative.
@vid111 Жыл бұрын
@@ShaneCreates is there any key fob for HomeKit to arm/disarm security system?
@davidbarnes2615 4 жыл бұрын
Hello Shane I just want to say you are making some good videos with HomeKit. I like that you are trying to find cheap HomeKit stuff that works well. Keep up the good work and I hope your channel gets bigger good luck
@ShaneCreates 4 жыл бұрын
David Barnes thank you for the kind words and support!
@NewHomeTech 4 жыл бұрын
Going to use my HomePod like you suggested in the Aquara video thanks!!!
@ShaneCreates 4 жыл бұрын
skiman24 you’re welcome! Good luck!
@luisalbertorodas7564 4 жыл бұрын
Como siempre un Excelente video. Saludos amigo
@waelemam 3 жыл бұрын
Awesome idea. That said, i have tried the same automation but using a dummy switch from Homebridge instead of the smart plug. Thank you.
@ShaneCreates 3 жыл бұрын
Even better, nice job! Thanks for watching!
@davidalan2469 4 жыл бұрын
I run Homebridge on a Raspberry Pi with Elk plugin for the Elk M1 my company sells that I put in my home. Lets me arm with Apple Watch or unlocked iPhone and you can use any sensor for automation. Recently I bought a Resideo (Honeywell) Lyric Controller because it has Homekit integration. It works great. Homekit will eventually be a great solution for alarm companies that never wanted to start working on home automation because it puts all the control in the hands of the end user.
@ShaneCreates 4 жыл бұрын
David Alan wow that sounds like a great setup!
@uniqueflh2941 4 жыл бұрын
Very cool. I think my recommendation for this type of set-up would be to add any/all exterior lighting devices to automatically turn on when the ‘security’ system is triggered. As many of us are using camera systems for monitoring our property, it would (hopefully) provide better image clarity for review. Also. Maybe I’m expecting too much from Apple, but I’d really like if this same functionality could be obtained without using a 3rd-party App. Your solution is definitely creative & simple, but I’m stubborn and prefer to not have to use & maintain a bunch of different Apps for ‘specialty’ features. Just my $0.02. Thanks for the new video. Keep them coming.
@ShaneCreates 4 жыл бұрын
Thanks Brad! Great suggestion for turning on exterior lights! That is something I've incorporated into my alarm scene as well.
@dgillings 4 жыл бұрын
I "Just" added a question on r/shortcuts about people doing homekit alarms etc. Fantastic! I shall do something very similar - using the ring spotlight siren as the sounder ! :)
@ShaneCreates 4 жыл бұрын
Daniel Gillings awesome!
@SasSaga 2 жыл бұрын
Awesome video! Noob, here, so I’m learning a ton from you! Thanks ! New subscriber.
@ShaneCreates 2 жыл бұрын
Awesome, thanks for subscribing!
@burogs 4 жыл бұрын
Fantastic video as usual. Thanks!!
@ShaneCreates 4 жыл бұрын
Burak Aktan thanks for watching!!
@notguiltystyle 3 жыл бұрын
Great stuff Shane. Can you please re-visit this topic with some more tips and smart shortcut automations to improve this DIY home alarm, also maybe some notifications tips.
@ShaneCreates 3 жыл бұрын
Thanks for the suggestion. I look forward to doing some more automation stuff in the future and I’ll see what I can do.
@jesperlaursen3917 4 жыл бұрын
Hi Shane, just sat this up and have it working like supposed to. However I suggest that the alarm off automation also resets the speaker volume to a normal lower volume level besides pausing the music, otherwise it can be very loud next time you start up some music. I did this by making two scenes, one for pausing the speakers, and one for adjusting the volume. I then include both scenes in the trigger the alarm off automation.
@ShaneCreates 4 жыл бұрын
Great suggestion Jesper, thanks!
@clintonrossouw8274 4 жыл бұрын
Gees bro, I think this is awesome, all the way from South Africa
@ShaneCreates 4 жыл бұрын
Clinton Rossouw thanks!! And thanks for watching! 🙏🏻
@ShaneCreates 4 жыл бұрын
nagelixin thanks for watching!
@01bigtrev 3 жыл бұрын
Koogeek HomeKit sensors work really well in this set up.
@ShaneCreates 3 жыл бұрын
Good to know. Thanks!
@joshx413 4 жыл бұрын
Awesome video!! Thanks
@ShaneCreates 4 жыл бұрын
joshx413 thanks for watching!
@leevardy852 4 жыл бұрын
Great stuff!
@ShaneCreates 4 жыл бұрын
Thanks Lee!
@powerinnumbers6159 2 жыл бұрын
Great video. I wonder if there is a way to trigger my vintage siren and strobe light from the 90's that is outside under the eve.
@clementweps7005 2 жыл бұрын
hello, great content, does your system works in case of power outage/ wifi flood or something like that? a video would be even great!! have a good one
@Salukicyclist Жыл бұрын
Hi Shane, This is great. I need to do some extended travel away from home and this looks like the way to protect my house. I have a question. In the list of things needed for set up you mentioned an iphone or ipad. I plan to take them with me on my trip. Will I need to leave one or both at home while I’m away … or do I just need them to set up the system? Thanks for this awesome plan.
@ahmadalj2004 4 жыл бұрын
I like the new lighting 🙂
@ShaneCreates 4 жыл бұрын
ahmadalj2004 thanks! I’m still experimenting to find what works and what I like best. 😃
@tomaszswietlikowski7804 4 жыл бұрын
Great. I also added Fibaro button to it in few rooms so I can run alarm siren and flashing lights with a button without sensors turned on. I can imagine someone breaking in before the security system is turned on so there is possibility he will be inside already and open sensors won't catch him after turning security alarm on.
@ShaneCreates 4 жыл бұрын
Great idea to use a homekit button to trigger the alarm!
@Norberthservices 4 жыл бұрын
Hi Shane I new to all of this so I am learning a lot with you. Great videos I really like all Apple products because of the security they offer Keep going mate. One suggestion,can you remove the music on the background or tune it down a bit I am a truck driver and with the road noise is hard to hear you The music blends with your voice Other than that great content 👍🏻
@ShaneCreates 4 жыл бұрын
Mei Lan I try to keep the bg music down as low as possible but I'll keep that in mind moving forward. Thanks for the feedback. And thanks for watching!
@TechUnafraid 4 жыл бұрын
Just noticed that you sub'd to my channel a little while ago Shane. What an honor man! Thank you and great job on your content as well! You got a sub here and i will be catching up on your content! Looks fantastic! Cheers man! ~Dial
@ShaneCreates 4 жыл бұрын
Dial Home Tech thanks man! Your content and production value is great. Keep it up!
@world_production 4 жыл бұрын
Really cool 👍
@ShaneCreates 4 жыл бұрын
Thanks!
@YousefGhalib 4 жыл бұрын
Nice 👍🏻
@RunyCalmera 2 жыл бұрын
Awesome man!!! There goes the security providers!! What will happen if there is no power? Can this system send a message to an external police etc if there is an alarm? Can you turn it off when you are away?
@SuperJohnnyuk Жыл бұрын
many thanks, another amazing vlog. can we do this without an apple music account as I have spotify and wont get apple simply for this reason
@SuperJohnnyuk Жыл бұрын
Ok I went and got Apple Music simply for this shortcut 😂 The alarm works amazing, it also syncs with the aqara alarm. I have made two automations, one for night which only uses the door sensors and away alarm, which includes all the cams, motion sensors as well the door sensors. When the alarm is triggered my Amaes hub and the home pod make this a brilliant system
@justsunnyb 4 жыл бұрын
This is epic!!!
@ShaneCreates 4 жыл бұрын
Thanks!
@manuelrodriguez3468 3 жыл бұрын
Hi Shane, I need your help. I have a ADT Pulse Security System. Is there a way to connect it with HomeKit? In order to take advantage of all the sensors and cameras that I already have and create automations with it using HomeKit.
@flodo4483 4 жыл бұрын
Love it 🤙🤙🤙🤙
@rivertonrock 4 жыл бұрын
Great video! I believe this could all be accomplished via the native HomeKit app, using advanced Shortcut automations. If you are away from home, how are you notified when the alarm is triggered?
@ShaneCreates 4 жыл бұрын
Brian May thanks! I haven’t tried creating conditional home automations using shortcuts. Doubt it’s as easy as the Eve app tho if it is possible. For notifications, the easiest thing is probably just turning on notifications for sensors “when nobody is home” in the home app.
@justsunnyb 3 жыл бұрын
Hey, I set this up today. Works really good. Thank you. My only question: is there a way to receive a notification if the alarm/scene is triggered?
@ShaneCreates 3 жыл бұрын
No, unfortunately there isn't that I can think of. If using this method, I'd probably just set up notifications for all of my sensors included in the setup to notify me when away. Then you could assume that the alarm was triggered if you get notified of one of the sensors opened while not home.
@justsunnyb 3 жыл бұрын
@@ShaneCreates Clever man - nice one!!!
@martintjrnild599 4 жыл бұрын
Great video, thank you. What kind of notifications would you be able to set up for this system, being away from home? Would you need to toggle notifications on for each individual sensor, or could you set up an notification, that the scene was triggered?
@ShaneCreates 4 жыл бұрын
Thanks Martin. Yes the easiest method would be toggle notifications for each sensor for only when you are away from home.
@suksmosusanto2096 4 жыл бұрын
Can we add alarm sound at our mobile phone once a sensor triggered ? Rather than just notification at phone. sometimes we are not aware if just notification
@misstubbie1313 2 жыл бұрын
Great video Shane! I'd like to implement that but for some reseon my EVE App is acting up on me. It categorically DOES NOT allow me to create new rules, nor edit previous ones. It's super frustrating. Every time I try to create a new rule and press the 'trigger' button the app crashes on me. Both on the iPad and the iPhone. I've tried deleting, reinstalling the app with no success. I wrote to Eve and told them my issue. I even sent a screen recorded video that shows the app crashing. Not even they know what's going on or how to fix it. Has any one gone through something like that?
@brucedelacruz9973 3 жыл бұрын
Hey Shane! Love your DIY security video here. I’ve been using it and works great. Question, I’ve been thinking about getting the Aqara hub, since I know it also comes with a security system built in, can I just “add” it on to the security system we built here? With all these different door sensors and even the HomePods playing the alarm sound? Thanks!!
@ShaneCreates 3 жыл бұрын
Thanks Bruce! You probably could...sort of. You will not be able to trip the Aqara alarm with other, non-Aqara sensors. There's no way to do that. But you could use the "security system" state that Aqara exposes to homekit as your "condition" for the automations you've setup, instead of using a smart plug like in this video. Hope that makes sense.
@brucedelacruz9973 3 жыл бұрын
@@ShaneCreates So essentially the Aqara hub would just become the “dummy” switch? Hhmm yeah that makes sense I guess. Can I ask, What benefits do you find to having an actual built in security system as opposed to the one you were able to create in your video??
@michaelwatkins9415 3 жыл бұрын
Thanks great explanations. I added 4 sensors in the Eve Automation/Rules/Trigger portion which creates a HomeKit Automation for only 1of my sensors. How do I get the other 3 sensors operating? Any help would greatly be appreciated. Thanks.
@ShaneCreates 3 жыл бұрын
Thanks for watching!
@c-hd5696 3 жыл бұрын
Dude, that's a cool video. I will try this. I really like your videos, but I would have a question in general. I really like Apple, but I would really like to have the Google Nest video Doorbell (and therefore have the Google Assistant Smart display), do you know of any apps which would allow us to stay in the Apple environment and not through the GA system just for this as well? And secondly, do you know of any sound system compatible with Homekit but not as expensive as the HomePod? I have already 2 of these. As much as I love them, they are expensive.
@ShaneCreates 3 жыл бұрын
Thanks for watching! I do not have any nest products. There is the Startling Hub that is made to integrate nest products into HomeKit, but I’m not sure what level of integration you will get with that. There is also Homebrige, which many people have used to integrate ring doorbells into HomeKit. But again, usually these solutions are not as good as native HomeKit support. Any speakers such that support Airplay 2 should integrate with your HomeKit setup pretty well.
@theappliancegiant 4 жыл бұрын
Hi Shane - I appreciate your videos, thank you. Question (maybe it's already been asked but to lazy to read all 133 comments), when you set the security, do you get a notification (or can you) if a door is open?
@ShaneCreates 4 жыл бұрын
Not really, based on whether or not the security it set or not. But you can set each sensor to send you notifications if it is opened like you can do with any homekit sensor. And you can specify what time of day and whether you are home or not, etc to get notifications.
@durkjan17 4 жыл бұрын
Great videos Shane! How can u control your smart plug outside your home?
@ShaneCreates 4 жыл бұрын
You have to have a HomeKit hub (apple TV, HomePod, or iPad) to be able to control your HomeKit accessories from anywhere. Hope I understood the question and that answers it.
@durkjan17 4 жыл бұрын
Shane Whatley thank you for your reaction!
@GunghoMarine83 3 жыл бұрын
Shane, your videos have been a super help getting my HomeKit automations set up through the Eve app. I just set up the alarm but I’ve got about a 6 second lag between when the door is triggered and when the alarm sounds and the only thing I can think is causing this is the ecobee door sensors I am using has to run through the ecobee thermostat first then to HomeKit, what do you think? I’m thinking I may need to go with the Eve sensors that are direct connected to WiFi or Bluetooth for a faster response time, what are your thoughts? Keep up with the great videos!!
@ShaneCreates 3 жыл бұрын
Thanks Mark! I'm not sure, I don't use the Ecobee sensors for any of my regular automations, so it's hard to say. Bluetooth sensors can also be a little slower sometimes. I tend to like sensors that connect via zigbee to a hub for speed, if every second is important. Those seem to be faster than bluetooth for me.
@GunghoMarine83 3 жыл бұрын
Yeah think I’m going to dump the ecobee door sensors for the Eve sensors since I have multiple HomePod minis all over the house and the eve door sensors have been upgraded to support thread so they should be screaming fast. Will update you later in the week with the results. Might be cool for you to do a video on thread product speeds vs Bluetooth and hub speeds, I’ve only found one video on KZfaq so far. Thread is pretty exciting.
@ShaneCreates 3 жыл бұрын
@@GunghoMarine83 Agreed. I'll be doing a video on thread pretty soon. It is pretty exciting and I'm looking forward to more products with thread support in the future.
@anitabradley5544 2 жыл бұрын
Do you have any issues with the sound on the HomePods not going off right away? Mine take like 30-60s before they actually play the audio.
@aaronhinton92 2 жыл бұрын
Is Apple Music still required for this? Or can I use KZfaq Music or Spotify?
@CrazYGuiTarX Жыл бұрын
Will it work with ring keypad using zWave and home bridge? I want to be able to actually type in a code Possible?
@MrBokkyboy 3 жыл бұрын
Hi Shane thx for this vid. So I'm about to build this system and have added the following on my shopping list 1. Eve smartplug 2. Eve door and window sensors All other products mentioned I already own except for a apple music subscription. Can this be done with my own music from the music library? Thx
@ShaneCreates 3 жыл бұрын
Yes you should be able to use audio files from your library. To be sure, you can set up a simple automation with the HomePod to test that out.
@MrBokkyboy 3 жыл бұрын
Shane Whatley nice thx. Time to hit the order button 👊🏽🤓
@MrBokkyboy 3 жыл бұрын
Shane Whatley damnn it doesn't work 😖😭😭. I get a pop-up saying I need a subscription in order to use this future. Hmm got to find another way 🧐
@ShaneCreates 3 жыл бұрын
@@MrBokkyboy oh man sorry to hear that.
@brucedelacruz9973 3 жыл бұрын
Hey Shane! Had a question hoping you might know the answer. I reference this video all the time. So I setup a DIY system just like you did. But I’m actually using the Aqara Hub as the “dummy trigger”. I like it better because of the security system status it exposes to HomeKit. So I just got an Aqara button and trying to configure the presses to activate the security system itself. Single for “arming” Double for disarming And long to activate the Code Red scene kind for like a panic button. They all work great but the one thing I’m trying to do is that when I do a single press, it arms the system, but it waits for 30 seconds before it actually arms. That way we have time to leave the house before it triggers anything. Does that make sense? I thought I would find it in Shortcuts but I can’t tweak each specific “press” on the Aqara button in Shortcuts. And i looked in the Eve and Home+ app and no sort of “IF single press, wait 30 seconds before arming security system”. Any thoughts?!? Would really love to try to get this working! Thank you in advance!
@ShaneCreates 3 жыл бұрын
Hey Bruce. A couple of thoughts... One - you can probably "convert to shortcut" when setting up your single press and then use the "wait" action to create that delay. Second - you can actually create that delay in the alarm's setting in the Aqara app so it will give you that 30 second delay every time you arm the system. That's probably the route I would go. I also use the Aqara app to configure/automate the button... single press arms and disarms the security system. Hope that helps!
@brucedelacruz9973 3 жыл бұрын
I must’ve missed something before. But yeah this works great!! Almost like having a keypad. In this case just a button but close enough!
@fredrikjacobsson4808 3 жыл бұрын
I will make a HomeKit Alarm System at home and at my workplace by creating two places in the Eve App. Then I will be able to know if someone breaks into my workplace when I am at home and vice versa. But what do you do if you are out? Yes, you can get a notification in your iPhone, but you may not notice it when it is in your pocket. Can you set a good alarm signal in the iPhone or use some form of caller when outside the local network?
@ShaneCreates 3 жыл бұрын
No there is not a great way to do that. This solution is more of a DIY option, using what you may already have available at home. I'd say, if you are truly concerned with security, consider getting a real, dedicated security system. There are a few available that support homekit.
@jim52356 2 жыл бұрын
I don't have a homepod, but do have an Apple TV. I wonder if it would be possible to play an "alarm" video/sound on youtube when this routine is triggered?
@ShaneCreates 2 жыл бұрын
That is probably possible...through Apple Music on the Apple TV, not KZfaq. But that could potentially result in a pretty slow response if your tv has to "wake up" when the automation is triggered. You could test it out, but mine takes several seconds when doing something like that.
@aimcm9819 3 жыл бұрын
For the alarm sound, is there another option besides having an Apple Music account? For example, with Homepod or Homepod mini, is it possible to store a sound file on the device (so that it does not require an Apple Music account)?
@ShaneCreates 3 жыл бұрын
You can play your own sounds, but you still have to have an Apple Music account as far as I know.
@kevinmcquown 4 жыл бұрын
Great. videos Shane! Not sure why but my HomePod doesn't show as an accessory when trying to add it to a scene but does show as an accessory on the main Home screen. Current HomePod software version is 13.2.1
@ShaneCreates 4 жыл бұрын
Kevin, that is strange. Seems like it should work if your HomePod is on 13.2. Also assuming the iOS device you're using is up to date? Does it let you change the music on your HomePod using Apple Music from the main Home screen?
@kevinmcquown 4 жыл бұрын
@@ShaneCreates Yes, from the main screen, if I tap on Homepod, it will start playing. Also, long press on the icon brings up the apple music pop up to select hit play, adjust volume etc. Also, my Apple TV shows as an accessory as well but not something that can be selected when creating a scene. I'll fiddle around with it today and if I run into a solution, I'll post here just in case anyone else has this issue.
@kevinmcquown 4 жыл бұрын
So my buddy has the same issue. Could it be that you are using a beta for either iOS or HomePod which has added this functionality?
@ShaneCreates 4 жыл бұрын
Kevin McQuown that’s strange. No I’m not using a beta on either. Do you have a default Apple Music account set in the HomePod settings? I’ll dig into it a little as soon as I can and see if I can figure out what might be the problem.
@kevinmcquown 4 жыл бұрын
RESOLVED. My phone was still on 13.2.1 and had not flagged that there was an update. You need. 13.2.2 for what you are showing to work. I'm an idiot. haha
@SirAndyJanvier 4 жыл бұрын
If you can incorporate that with the ADT system
@adventurepost Ай бұрын
I am not yet familiar with eve. Assuming I have eve installed on my phone, where is that critical conditional logic actually stored? Is it on my phone or on an eve cloud somewhere? In ether case it sounds like it would be dependent on my phone, the internet or both which wouldn’t be ideal for an alarm system. My hub is currently an Apple TV, would it be better if eve was on an iPad that I was used as a hub?
@kengould6253 2 жыл бұрын
Hey Shane. Any idea on how to get the siren to be a base64 encoded audio file? so that its not dependent on apple music (and the inherent delay with that?)
@ShaneCreates 2 жыл бұрын
Hey Ken, as far as I know, you have to have an Apple Music subscription to make this work no matter what. You can use your own files, uploaded to iTunes/Apple Music, but still need the Apple Music subscription to setup the automation.
@tttrelva 11 ай бұрын
Is there any solution, for those who don’t have a HomePod, to use a sensor to trigger the alarm and use personal automation in an iPhone to start an alarm sound?
@justsunnyb 3 жыл бұрын
Excellent, will the Eve automation take into account Homekit activity zones on iOS 14? e.g Eufy indoor cam with activity zones - if I set security system on - is it looking at the whole camera or just my activity zone?
@ShaneCreates 3 жыл бұрын
That's a good question. I'm not sure if the motion sensor from a camera will only trigger when motion is detected in the zones. I'll have to try that out.
@justsunnyb 3 жыл бұрын
Shane Whatley okay. Can you let me know please?
@ShaneCreates 3 жыл бұрын
@@justsunnyb Did a quick test. From what I can tell, it appears that the motion zones are only for the camera recording settings and the "motion sensor" HK accessory does not use those and still acts as any motion sensor.
@justsunnyb 3 жыл бұрын
@@ShaneCreates Ahh, that's a shame. Thanks for doing the test, really appreciate it.
@Averagedude764 4 жыл бұрын
Hi Shane, I’m in the process of deciding how to do a homekit alarm system. I followed your instructions but for some reason when my device triggers, it’s not setting off the scene. I’m using an ihome device as the dummy switch and Lutron lights / homepods for my scene. I programmed one of the Lutron switches / door locks / and sensors to be the triggers, but not of them are working. Any ideas on what could be going wrong? Also, I created a really cool Siri shortcut I would love to use with this setup to turn on my bedroom TV, load my home cam’s, and flash all of the lights in the house with the siren sounds playing on the homepods. Any idea how to trigger a Siri shortcut via a door sensor or homekit switch? I can program all of the shortcut items in the homekit automation through shortcuts, but it won’t let me control the Apple TV and open apps. Thanks
@ShaneCreates 4 жыл бұрын
Hey Patrick, not really sure what the problem could be if everything is set up right. I'd double check the automations in the eve app. Maybe remove all triggers except one in an attempt to troubleshoot the problem. When you setup a new homekit automation and convert it to a shortcut, you do not have majority of the shortcut actions that are available in regular shortcuts, unfortunately. That's why you can't use the Apple TV remote app in the shortcut/automation.
@Averagedude764 4 жыл бұрын
Thanks Shane for the reply. I actually just figured out what was going wrong. I have three homepods in the house acting as home hubs and one of my Apple TV’s was not disabled as a hub. Once I disabled my last Apple TV as a hub, I was able to get it to work. So it appears it was a problem with the Apple TV being a hub and the homepods. Thanks again for the advice. Your videos are great!
@Farmer-Mike 3 жыл бұрын
Hi Shane. Im doing this Security system. It’s almost done, but can I get a notification when the alarm goes of and Im not at home?? I have the Eve window and door sensor and they are set to give a push notification when Im not at home, but I would like to know if I can get somekind of sound on my IPhone 11 pro max when the alarm goes of??
@ShaneCreates 3 жыл бұрын
Unfortunately this isn't really possible. I was able to send my self a text message or phone call using the pushcuts app as an automation server on an old iOS device. But that may be more trouble than it's worth. If you want to see how I did that, I did make a video about it here: kzfaq.info/get/bejne/eb1dZpx2yJ61qp8.html
@Mobyzone 2 жыл бұрын
Can you use HomePod Mini for this or does it have to be the full blown HomePod? Thanks
@ShaneCreates 2 жыл бұрын
HomePod mini can do the same thing.
@Mobyzone 2 жыл бұрын
@@ShaneCreates Fantastic thanks for the fast response!
@benoitmarcoux59 4 жыл бұрын
That's a great post, Shane. Question: Is there a way to automatically turn off the "alarm" (aka HomePod) automatically after a while or perhaps once all sensors are back to normal? I know that the alarm can be turned off remotely, but I could be away and unable to turn it off myself. No need for it to ring forever... Also, I'm planning to use a siren instead of the HomePod, simply turning it on with a smart plug.
@ShaneCreates 4 жыл бұрын
benoitmarcoux59 thanks! Yes. For the HomePod, you could have the audio file only play once or loop only a couple of times. For your case if using a siren plugged into a smart plug, whe setting up the automation there should be the option to “turn off after” and you can choose any number of seconds or minutes that you want it to turn off after.
@benoitmarcoux59 4 жыл бұрын
Shane Whatley, Thanks again. I looked into the Eve and Home apps, and I could not locate how to choose a timer to keep the scene ON for a while. Could you please point me to this setting?
@ShaneCreates 4 жыл бұрын
benoitmarcoux59 sure. In the Apple home app, you can create a new automation, select the trigger, then when you select the device you want to turn on, you have an option to “turn off after” and you can choose the amount of time.
@ShaneCreates 4 жыл бұрын
benoitmarcoux59 to clarify, this is an option when setting up an automation, not a scene
@Eckline 3 жыл бұрын
I understand the benefit of the free eve app with the conditional logic, but will this automation break if the eve app gets deleted from the phone or if the phone is turned off?
@ShaneCreates 3 жыл бұрын
Eric Kline it should still work fine since automations are still HomeKit based and do actually show up in the Apple home app once created with Eve.
@europlane77 4 жыл бұрын
Awsome video Shane. Im working on a lot of scenes and im trying everything right now, but i have an enourmous issue. Im using the Aqara hub and mixing it a lot like in your video, but the sound coming out of the speakers is just music. Not the alarm sound. I cant get it to play the alarm. I have 2 symfonisk speakers and it is set to play sound and i have connected it to apple music, but still wont.
@ShaneCreates 4 жыл бұрын
Check out around 4:55 in the video. When you add your AirPlay speaker to the scene you should have a “Media” section where you can choose what will play as a part of the scene. I chose an alarm sound effect that I found in Apple Music.
@europlane77 4 жыл бұрын
Shane Whatley yeah i have done everything after the book. Restartet everything and now it works. Wierd 🤔. The homekit toggle button, how do you create that.? I have been working all day making scenes and installing sensors all over. I just need a button in homekit to toggle for the family. Later i will put nfc stickers in the house.
@ShaneCreates 4 жыл бұрын
europlane77 glad you got it working. Just set up your HomeKit button to toggle the alarm system. One press to arm, double press to disarm. Something like that assuming you set yours up similar to the video here.
@europlane77 4 жыл бұрын
Shane Whatley ok my bad. I thought it was a shortcut of a kind. A once press buttom in homekit. Yes a physical buttom i have. Please open a patreon so we can support your channel.
@ShaneCreates 4 жыл бұрын
europlane77 thanks so much for the offer and support!
@nellyfive Жыл бұрын
Hi, I'm a little late to the party here, but can you add an entry delay so that the alarm doesn't go off as soon as the door opens?
@pilot876 2 жыл бұрын
Thought about ADT but would much rather set something up that’s HomeKit integrated really don’t want to go through the hassle of contracts and etc.
@jaroddolan1 3 жыл бұрын
Just had my friend who sounds nothing like me say "turn off security system" and siri turned it off! So in some instances it may be better to disable voice commands for this automation.
@PodtrashRadio 2 жыл бұрын
Had this issue before where my girlfriend was able to activate my Hey Siri who obviously sounds nothing alike. Reason is most of us setup Hey Siri in a rush when we get a new iPhone. Go into Siri & Search in your Settings app and toggle "Hey Siri" off and then toggle it back on. Go through the process for Hey Siri again in a QUIET space with no noise and do it properly. Do the test again and you'll see that Siri now recognizes only your voice. This worked for me.... although I would never have Hey Siri be able to disable my alarm system.
@laytonh8806 11 ай бұрын
Is there a way to set a exit delay
@bheath48 4 жыл бұрын
Any thoughts on adding another condition that none of the iPhones for the occupants are home so that you could leave this on all the time and it would only trigger when no one was home?
@ShaneCreates 4 жыл бұрын
Brian Heath yes you could certainly do that, and if so you wouldn’t really even need to use the plug to toggle on/off. However you wouldn’t be able to use it while at home when sleeping, etc.
@robertfoster108 4 жыл бұрын
Hey Shane love the video! Can we get a HomePod video review with examples of how to use it with your smart home? It will great for people like me that are on the fence about purchasing the HomePod.
@ShaneCreates 4 жыл бұрын
Thanks Robert! I like that idea. Thanks for the suggestion! FYI: Home Pods just went on sale at Best Buy.
@robertfoster108 4 жыл бұрын
Yes!! Probably going to purchase one or two lol
@rafafernandez4485 4 жыл бұрын
Hi from Spain Could you automate disarm alarm aqara hub when anyone arrive at home? I don’t want as trigger any adittional accesory. Thanks so much Regards
@ShaneCreates 4 жыл бұрын
You can, but I believe it will require you to authenticate on your phone when you arrive since this is probably considered a secure accessory.
@rafafernandez4485 4 жыл бұрын
Shane Whatley Is it possible eve app will can it? I readed blog than eve app: for example. First step when the last person leave home, configurate light aqara hub red color. Second step when light aqara hub is red, arm aqara hub.
@ShaneCreates 4 жыл бұрын
@@rafafernandez4485 Yes you can do it this way. You don't really need to the Eve app. This is basically a "work around" for the authentication of the secured accessory. I've done something similar with my garage door (also requires authentication to open via geofence). Here's what I did: I used a "dummy switch" smart plug that turns on when I arrive home (and turns off after a minute). A second automation then says when the "dummy swith" is turned on, open the garage. No need for authentication on the dummy switch so now my garage door opens automatically when I arrive.
@rafafernandez4485 4 жыл бұрын
Shane Whatley This option, Dou you have always authentication? I want automatic arm aqara hub without authentication. Your garage door automation, you need open the garage door for disarm alarm. Before, I had one plug, now if is possible, I don’t want any accesory. Thanks so much for help me
@ShaneCreates 4 жыл бұрын
I don’t believe you need to authenticate to arm the alarm, only to disarm.
@PodtrashRadio 2 жыл бұрын
Problem with this is the reliability of smart devices these days. Relying on WiFi, Z-wave, Bluetooth, or even this new Thread technology is not something I would put full confidence in. Devices can sometimes go non responsive or scenes could fail and that could mean the difference between someone breaking into your house or not. I currently have a Paradox alarm system that is hardwired and has motion sensors, door sensors, smoke alarms, window sensors, and water sensors in the basement all hardwired into a panel in my basement. I would LOVE for a way to integrate this system into HomeKit by maybe some sort of Homebridge plugin for the control panel or swapping out the control panel.... will have to look further into it
@kanzai12 4 жыл бұрын
I am really miss Homekit content. After iOS 13 release with bug stuff, its really rare or at least become less content related with HK
@ShaneCreates 4 жыл бұрын
Zaihan Jalimin well stay tuned because I’m releasing a new HomeKit video every week! 😃
@iGiorgisWorld 4 жыл бұрын
I have Xiaomi Aqara as security system (HomeKit) and 2 sensors at 2 doors. I try to use the Aqara's sound system (speaker) but I cant do it via Eve's app. Its necessary to buy HomePod only to works? I can't create the sound. Maybe I need extra settings at Xiaomi's app??? Do you know how? Thanks
@ShaneCreates 4 жыл бұрын
Yes to trigger the Aqara alarm, you must be using Aqara sensors and must configure the settings in the Aqara app or the Mi Home app.
@iGiorgisWorld 4 жыл бұрын
Shane Whatley and how I create the automation? For example when I will go from home automatically enable the “away” state? And when I return to change the state again to normal?
@ShaneCreates 4 жыл бұрын
iGiorgis World Create a new automation in the home app for “when I leave” and choose the accessories you want to control, such as your alarm system. For more on making basic automations in the home app check out this vid: kzfaq.info/get/bejne/ld9ldtR8lbDcd30.html
@sarasagar76 2 жыл бұрын
How do you get notifications about that, when you are not at home?
@zacharybeth9381 4 жыл бұрын
Can link up Arlo Pro 2 to the HomeKit also?
@ShaneCreates 4 жыл бұрын
Yes, I think the Arlo pro 2 is homekit compatible.
@jamworkshop 3 жыл бұрын
Is it possible to set a delay to let us leave before the system start . To avoid to start it when we open the door to leave
@ShaneCreates 3 жыл бұрын
Unfortunately, using this method I don't think that's possible unless you are using something like HomeBridge or hoobs and then you could use timers and/or dummy switches maybe.
@hjparma 4 жыл бұрын
What about the Aqara Hub? Isn’t that supposed to act as an alarm security system too?
@ShaneCreates 4 жыл бұрын
hjparma yes it does and I love the Aqara stuff. This setup here is more for anyone who wants to use other sensors as a part of an alarm system in HomeKit. When using the Aqara hub as an alarm, you can only use Aqara sensors to trigger the alarm. This works with any HK sensors.
@hjparma 4 жыл бұрын
Shane Whatley thanks. I just bought that Aqara Hub so I am going to have to return it. I was hoping it could be triggered with other HomeKit sensors!
@ShaneCreates 4 жыл бұрын
hjparma yea, unfortunately you can only trigger the Aqara alarm with Aqara sensors currently. The setup in this video will work with HomeKit sensors from any manufacturer.
@hjparma 4 жыл бұрын
Shane Whatley this is what I ended up doing. You can use any of the HomeKit sensors! blog.evehome.com/a-homekit-inspired-siren-for-enhanced-security/
@bryanholbrook4229 4 жыл бұрын
Add an automation to turn the alarm button on when everyone leaves home and an automation to turn it on when the first person arrives....makes for a no hassle addition
@ShaneCreates 4 жыл бұрын
Bryan Holbrook that’s a great use case! True automation...the beauty of HomeKit.
@bryanholbrook4229 4 жыл бұрын
If someone figures out how to be notified that would be huge
@ShaneCreates 4 жыл бұрын
I have all my sensors set with notifications turned on so I get notified when no one is home.
@zacharybeth9381 4 жыл бұрын
@@ShaneCreates so if my friend walks into the home without me there and the security system is accidentally on the only way to turn it off is on my phone? So i would get a notification the alarm is on and need to turn it off from my phone?
@ShaneCreates 4 жыл бұрын
@@zacharybeth9381 I don't think there is an easy way to get alarm notifications using this method. I'd recommend setting notifications for all sensors included in the setup to notify you if open when you are away.
@richards3345 4 жыл бұрын
Any idea on how to make a entry delay on a door so it doesn’t set off the alarm as soon as I enter?
@ShaneCreates 4 жыл бұрын
You can now use "convert to shortcut" when creating automations. You might be able to do it that way. General idea is make a new automation for when a door opens, then convert to shortcut. Then use an IF statement to determine if the outlet is on or off. If it's on, "wait" 30 seconds, set HomePod alarm sounds and other lights or scenes, etc. Otherwise do nothing. Haven't tried this so I'm not sure how well it would work, but that's probably how I'd go about it. Can't add a delay in the eve app.
@didiernom5265 4 жыл бұрын
hello, i have a sonos one how support the airplay 2 but no sound comes out if the alarm should turn on.... also with a easy automation, by exemple : door living room open --> sonons on. it doesn't work.....
@ShaneCreates 4 жыл бұрын
Did you choose the audio for the speaker to play and select the volume level also?
@didiernom5265 4 жыл бұрын
@@ShaneCreates yah, i did ):
@didiernom5265 4 жыл бұрын
@@ShaneCreates and thanks for responds :)
@didiernom5265 4 жыл бұрын
@@ShaneCreates i also try by example a automation to play a music on the sonos at 2pm and if i whait for it... nothing i have apple music too
@ShaneCreates 4 жыл бұрын
Didier Nom hmm I’m not sure the problem. Maybe it’s an issue with Sonos? I don’t have one so I’m not sure. I’d try contacting Sonos support to see if they have any ideas.
@YousefGhalib 4 жыл бұрын
Is there a way to do this without having Apple Music subscription?
@ShaneCreates 4 жыл бұрын
I believe you can also use audio tracks uploaded to your iCloud music library.
@Adventure.AS.25 3 жыл бұрын
Are you aware of a HomeKit keypad that can be programmed and used to turn off the 'alarm system' that you created? That would be useful for allowing someone to have a key to the house who doesn't have an iPhone.
@ShaneCreates 3 жыл бұрын
No, unfortunately there are no keypads that work with homekit. You may want to consider a dedicated security system if you need something like that. This is more of a DIY solution using things you may already have. The Abode Security Systems do support HomeKit and you can purchase a keypad that works with it. While the keypad itself isn't exposed to homekit, you can use it to turn on and off the alarm that is exposed to homekit.
@M.itcchh 3 жыл бұрын
Is there an option to let people outside your homekit users disarm the alarm?
@ShaneCreates 3 жыл бұрын
No, not using this method. It would have to be someone with access to your homekit home.
@hoppy6250 4 жыл бұрын
How come you didn’t use the alarm function/toggle built into the Aqara hub rather than an outlet?
@ShaneCreates 4 жыл бұрын
This setup is intended mainly for people NOT using the Aqara products. I get asked a lot about using non-Aqara sensors for a security system. For anyone using the Aqara Hub, then yes I agree, that would be best to use as the alarm's on/off function.
@mohamedyousri2307 4 жыл бұрын
I was searching for this comment and your reply Shane thanks for both of you
@chrisperrywv 2 жыл бұрын
So what about notifications? What good is the alarm if not even you are notified? I mean sure the siren could surprise an I trader but…?
@ajlandry13 4 жыл бұрын
How can i add HomeKit TV and Apple TV play alarm sounds?
@ShaneCreates 4 жыл бұрын
You can play audio to an Apple TV in the same way we did to the HomePod in this video.
@ajlandry13 4 жыл бұрын
Shane Whatley thanks dude you the best!
@thebighat99 4 жыл бұрын
Is there a way to set sensors notification that goes to your phone as alarm for you phone to wake you up? Notification sound is not going to cut its so low i sleep though it. nice job but there is no way my poor little brain is do all that, and dont have all that stuff. am i just stupid or should you not beadle to set alarm sound win Sensors goes off to phone?
@ShaneCreates 4 жыл бұрын
I don't think there is an easy way to set an alarm on your phone for sensors unless you are using a dedicated alarm system. Best options is probably to use automations to send an alarm sound to airplay speakers, or just get some type of alarm system. There are a few out there that work with homekit (Aqara, Abode, etc.).
@thebighat99 4 жыл бұрын
@@ShaneCreates Thank you i will check them out.
@Custompro36610 4 жыл бұрын
Hello, but there is not yet a mermaid, who works with Homekit ??? I already know that I can, but ,,,,,, there is no more !!!!!!! I've seen the new Mermaid of Netatmo, but I don't know if I work with Homekit. You can help me (
@Chabalaba83 4 жыл бұрын
Hope if anyone can help me: I`ve made the alarm system with a philips hue smart plug as a toggle step by step. But I don`t have an Apple Homepod rather my Sonos One which is listed in the homekit app. The problem is if the motion sensor by philips hue is triggered only the lights go on. No Sound is coming from the sonos one :( what is going wrong ?
@ShaneCreates 4 жыл бұрын
Aboutblank TV did you choose the audio to playback in the automation?
@Chabalaba83 4 жыл бұрын
I‘ve fixed it. First of all I have only one Sonos One in the automation. Then I‘ve set all my sonos speakers with AirPlay 2 to the automation and it works. Next problem: how I get the Philips hue blinking? At the moment the bulbs only turn and stay on :-/ sorry for my bad english 🙈
@ShaneCreates 4 жыл бұрын
@@Chabalaba83 haha no worries. I used the light effect mode discussed in a previous video but that method doesn't work with hue lights. Unfortunately phillips hue doesn't expose the light effect mode to homekit. There is a way to do this using shortcuts. If you convert your automation to a shortcut, you can make the light turn on, wait a couple of seconds, turn off and repeat a number of times.
@Chabalaba83 4 жыл бұрын
Shane Whatley yeah that‘s a good idea. I‘ll try it later. Thanks a lot mate and keep it up. You make a good job :)
@ShaneCreates 4 жыл бұрын
@@Chabalaba83 Thanks!
@pw-gamer2903 4 жыл бұрын
I didnt get why you used an outlet, is it for turn on/off sensors or what?
@ShaneCreates 4 жыл бұрын
Yes so you can turn on/off the “security system.” Otherwise, the alarm would sound every time you open the door after setting up the automation.
@pw-gamer2903 4 жыл бұрын
Then what thing is connected to the outlet? Can i use aqara hub to turn on/off security system instead of using a outlet?
@ShaneCreates 4 жыл бұрын
PW-Gamer nothing is connected to the outlet. It’s just a “dummy switch” that allows me to use the conditional automation. Yes you can definitely use the Aqara hub to turn on/off the security system instead. That’s what I’ll probably do. The smart outlet is a good solution for anyone who doesn’t have an Aqara hub.
@pw-gamer2903 4 жыл бұрын
Shane Whatley thanks for your quick answer 🤓👍
@deputyvillageidiot 3 жыл бұрын
You can’t control a Hue switch?
@benkirby1484 3 жыл бұрын
Any way of getting this to send a notification to phone too
@ShaneCreates 3 жыл бұрын
No, unfortunately there isn't a way to send notifications unless you are using an actual homekit alarm. You can set any sensor to send you notifications but you will always get the notifications.
@benkirby1484 3 жыл бұрын
@@ShaneCreates think you can get the notifications to send only when no one is home so I guess that solves half the battle
@benkirby1484 3 жыл бұрын
@@ShaneCreates the sensor notifications that is.
@ShaneCreates 3 жыл бұрын
@@benkirby1484 Yes you can do that. In the sensor settings (in Home app) just go to Notifications and you should be able to turn on notifications and choose "when no one is home."
@benkirby1484 3 жыл бұрын
@@ShaneCreates Thanks for your input . Enjoy your break with family
@damo06ab 2 жыл бұрын
My first thought was that you should never be able to turn of the security system by asking Siri, but I'm sure it's just for showing the use.
@josehernandez16 4 ай бұрын
Who here is wondering what the "Sexy Time" automation does? lol
@xaviera8761 4 жыл бұрын
Shane does this mean you are going away from the Aqara hub and using the HomePod from here on? I have a HomePod and don’t wanna buy unnecessary item if not needed. Love your video bro thx for your information.
@ShaneCreates 4 жыл бұрын
Xavier A No, not at all. I still very much enjoy my Aqara setup. I will probably combine them and use both. I wanted to show folks how you can use HomeKit sensors from any manufacturer to create an alarm system. In fact, you can even use this process combined with Aqara accessories, which is probably what I will do.
@ShaneCreates 4 жыл бұрын
Xavier A and thanks for watching!
@xaviera8761 4 жыл бұрын
Thank you for the quick response. I’m definitely going to go the HomePod route since I already love the ecosystem and now just need window and door sensors. I wonder if I could use my ecobee sensors to trigger motion when armed.
@ShaneCreates 4 жыл бұрын
Xavier A I don’t have an ecobee (yet) but yes I think this will work. As long as they show up in HomeKit as a motion sensor. Also worth noting tho: the main reason I love the Aqara sensors is, not only are they super fast and reliable, they are VERY affordable. So they are a good option if cost is a concern and you need a lot of sensors. Not sure your location, but I’ve been told that they will be available in the Amazon US store very soon.
@xaviera8761 4 жыл бұрын
Shane yes they come up as motion and temp in HomeKit. Thank god they fixed it back to using two tiles for the display. I hated the consolidation tile. They are showing the Aqara door and window sensor on Amazon 2 ea for $28.
@andreh3809 2 жыл бұрын
So nobody else noticed "sexy time" 👀8:13
@hypebeasttech4944 4 жыл бұрын
I just moved in to my first place with my girlfriend and I definitley want to make my home an apple smart home could you maybe show a tour of your HomeKit?
@ShaneCreates 4 жыл бұрын
Hypebeast Tech yes that’s definitely on my list of things to do in the future. I’m still working on my setup so it never feels “complete.” In the meantime, feel free to check out my past videos or my website. Lots of content there on getting started and I’ve made videos about most of the things in my HomeKit setup so far.
Go Gizmo!
Рет қаралды 19 МЛН
Fabiosa Best Lifehacks
Рет қаралды 42 МЛН
HIMAWARIちゃんねる
Рет қаралды 17 МЛН
Shane Whatley
Рет қаралды 52 М.