HomeKit Secure Video - How To Enable it for Any RTSP Camera
Рет қаралды 61,886
Күн бұрынCamera UI is the ultimate Homebridge companion Plugin that allows you to expose your existing RTSP capable IP cameras to Homekit plus enable them with the Homekit Secure Video feature and allows you to manage your existing cameras with an incredible rich and reliable NVR like Dashboard for your Smart Home - ALL FOR FREE !
⏱️ TIMESTAMPS ⏱️:
================
00:00 - Intro
00:32 - Opening
03:16 - Generic IP Camera that will work with HomeKit Secure Video
05:25 - Generic Camera RTSP configuration
08:00 - Camera UI Plugin Overview
08:53 - Camera UI Plugin Configuration
13:35 - Camera Ui Dashboard Overview
15:54 - Homekit Secure Video Demo
18:29 - Closing
Homebridge Plugin - www.npmjs.com/package/homebri...
Tested Camera Configurations - sunoo.github.io/homebridge-ca...
🖥️ Homebridge Installation Links 🖥️
✔️ Install Homebridge in a Synology NAS - • Synology DSM 6: How to...
✔️ Install Homebridge in macOS - • How to Install Homebri...
✔️ Install Homebridge in Windows 10 - • How to Install and Con...
✔️ Install Homebridge in a Pi 4 - • How to build a Ultimat...
🛑 Subscribe for NEW HOMEKIT DIY VIDEOS EVERY WEEK! 🛑
kzfaq.info?...
🌟 Business Inquiries Only 📧 ► eddie@buildasmarthome.org
Buy me a 🍺 - www.buymeacoffee.com/eddiedsouza
FOLLOW ME ON -
Visit - www.buildasmarthome.org
Facebook Page - / buildasmarthome.org
Instagram - / buildasmarthome
LinkedIn - / eddiedsouza
#homekit #homebridge #homekitsecurevideo #rtsp #ipcameras #homeautomation #securitycamera #casainteligente #smarthome #smarthometech #smarthometechnology #smarthomeinstallations #securityproducts #reolink #hikvision #wyzecam
@S_Padival 2 жыл бұрын
I found that for HKSV, it is better to leave the following Camera UI stream configuration parameters blank - max width, max height, max framerate, max bitrate. Then the parameters will default to whatever is requested by Homekit. This resolved the problems I had with Hikvision ip cameras
@eddiedsuza 2 жыл бұрын
Thanks for the Tip & Pinning Your Comment
@reaford2004 2 ай бұрын
I want to say thank you. We just built our dream home. I went full HomeKit smart home. One exception was the generic ip cameras my networker used. I tried for weeks to integrate them until I found this video. Works flawlessly now. Thank you. Earned a sub from me!!!
@eddiedsuza 2 ай бұрын
Thank you and enjoy the new home. We just moved into ours as well .... Cheers
@mattskiba6438 2 жыл бұрын
Thanks Eddie clear and easy to follow instructions (as always)!
@eddiedsuza 2 жыл бұрын
Thanks Matt ! Glad it helped
@rustybobn Жыл бұрын
Thank you so much! I had been trying to get a different plugin working for days before I found this video. I like this plugin much better! Thank you for the specific instructions.
@eddiedsuza Жыл бұрын
Your welcome... Cheers
@v.netsivka Жыл бұрын
thank you for the video! everything you shoot is relevant for me!
@eddiedsuza Жыл бұрын
Your welcome Volodymyr ... Cheers 😇
@martinphaneuf3083 Жыл бұрын
Thank you Eddie You make my day!
@eddiedsuza Жыл бұрын
My pleasure! cheers
@martinphaneuf3083 Жыл бұрын
@@eddiedsuza Not sure if im the only one.. but on the dashboard, my camera framerate is perfect,,, but on homekit,,, its like 1fps..
@eddiedsuza Жыл бұрын
@@martinphaneuf3083 please check the camera config frame rate ... somethings not right for Homekit
@sirdrakey Жыл бұрын
I need to check this out thank you!
@eddiedsuza Жыл бұрын
Hope you like it! Cheers
@thesniper111 Жыл бұрын
Thanks that was very useful❤
@eddiedsuza Жыл бұрын
Glad it was helpful! Cheers
@MrPatrickRey Жыл бұрын
Thank you Eddie!!
@eddiedsuza Жыл бұрын
Your Welcome Patrick ! Cheers
@MrPatrickRey Жыл бұрын
Thanks!
@eddiedsuza 2 жыл бұрын
Follow me on instagram as well instagram.com/eddie_dsuza/
@luisrese4288 Жыл бұрын
Gracias! Thanks 🎉
@eddiedsuza Жыл бұрын
You're welcome! Cheers
@joeyrosen55 2 жыл бұрын
Another great video Eddie. Any tips on setting this up through HOOBs instead of Homebrige? I'm having trouble setting it up
@eddiedsuza 2 жыл бұрын
Hey Joey - I,ll need to flash and setup HOOBS to test the plugin - will need sometime. However, for HSV to work - at its heart HOOBS must use Homebridge 1.4.0 - if not HSV will not work. Another issue with HOOBS is the files structure of the system - plugins like these strictly follow the Homebridge documentation. I found one closed issue in Github that has a HOOBS user successfully installing it - github.com/seydx/homebridge-camera-ui/issues/116 Please give it a try and open an issue with HOOBS to get the plugin to work with its system.
@1slyboy Жыл бұрын
Would be interested in doing this with Scripted, but thanks for this content.
@eddiedsuza Жыл бұрын
Your Welcome. Cheers
@FelipeMC0810 Жыл бұрын
Great video! Can you share the Wyze Can 2 configuration (video source) that you used?
@eddiedsuza Жыл бұрын
Yes I can. I used this one sunoo.github.io/homebridge-camera-ffmpeg/configs/Wyze-Cam-v2-and-Pan.html
@VenkatVisvanathan 11 күн бұрын
I have Arlo vmc2050 outdoor essential camera. How can I connect to HomeKit. It doesn’t connect to their hub and WiFi only and doesn’t seem RTSP enabled. Any options?
@jig1056 2 ай бұрын
So this is very cool. Insulation configuration was pretty straightforward. Thanks to your video. The problem I have though is it seems to miss a lot of recordings. It’s really to the point that I could see myself on the live feed and it’s simply just doesn’t record it. I’m seeing this across multiple cameras. Is there anything I could do to make it better or more reliable. I was using scripted, but for some reason, it has an incredible high usage rate of resources.
@eddiedsuza Ай бұрын
All you can is restart the plugin or restart the Apple home hubs. It’s an Apple feature for HKSV to work within Apple home app.
@mikek1139 10 ай бұрын
Great video. It helped me get my Dahua security cams on HomeKit. I'd like to use the Homebridge Camera UI to setup a separate display, but the cameras only show up offline. Not sure what I'm doing wrong.
@eddiedsuza 10 ай бұрын
Please check the logs and assisgned IP address as well to the cameras
@mikek1139 10 ай бұрын
@@eddiedsuza Thanks and I'll check other interweb sources.
@vrnicastro6353 Жыл бұрын
Hoping I could get my Reolink Wi-Fi cameras working too. No major issues with my Reolink POE cameras. I was reading that the Wi-Fi Reolink cameras use a different type of stream. I spy doesn’t have the models listed 🤷🏻♂️
@eddiedsuza Жыл бұрын
Can you please provide the model and will check it out for you if theres a recommended streaming link.
@caleb5892 Жыл бұрын
Awesome Video, Eddie!! Just a few questions, if I want to use my NVR would I still keep the settings the same in terms of the HKSV? Also for the resolution if I want to have everything save to the NVR would I just keep it at the 4k or 1080p as is? Thank you again!
@eddiedsuza Жыл бұрын
You can standardize it as 1080p across the board that is NVR as well as HSV. If you do it on the NVR level - the 1080p stream is transported natively to HSV with no more processing required. I have been doing that for my customers = 1080p at NVR level
@jasondesramaux8914 Жыл бұрын
Hello , I'm having a trouble getting my Eufy SoloCam E40 stream to work. The stream generator didn't provide a correct link. Any suggestions
@eddiedsuza Жыл бұрын
Hey Jason - is the username / password correct and I would use the options from other models mentioned in this link www.ispyconnect.com/camera/eufy
@elmasryahmed 2 жыл бұрын
Thanks Eddie for the great tutorial, is it possible with camera UI to run automation based on motion detection from WYZE cam?!
@eddiedsuza 2 жыл бұрын
Through the camera UI - you can only automate the recordings based on Type & Time. However from Homkit - I was able to finally automate scenes using the sensor built into the Wyze Cam. Its better to create the automation witin HomeKit. Cheers
@ajwad87 Жыл бұрын
where do you get the 8-digit code that to be put for configuring the camera in the Home app ?
@eddiedsuza Жыл бұрын
Go to the Homebridge Status page and the code is under the QR image
@IamSquareT Жыл бұрын
Hey Eddie, your videos have been really helpful! I was wondering if you have ever run into a situation like I am experiencing? My wyze cameras work in the camera.ui interface but the stream doesn’t work in the homebridge preview window or in HomeKit. Logs say the connection is successful and sending data but the video never comes through and then forces the stream to quit.
@eddiedsuza Жыл бұрын
Hello Ryan ... Please check the stream link via VLC so as to confirm the stream broadcasts with no issue. And also the video configuration - must be between the range of 1980 x 1080
@thair Жыл бұрын
Please do a vid for Ring.. I did setup all.. straight forward, but can’t figure out how to record ( no time line is showing) not sure if my ring subscription is the reason
@eddiedsuza Жыл бұрын
Hey Thair.... I got the ring setup thru Scrypted and i can see a timeline however will wait for it to capture more events based on Specific motions is detected selection. Cheers
@joshuahaney1135 8 ай бұрын
So when I go into home and get the accessory, I don’t see the camera that I added, but it’s working in Homebridge?
@eddiedsuza 7 ай бұрын
You will need to add it as a accessory.
@lvdigitalgrowth6494 Жыл бұрын
Hello Eddie! When I try to switcht the streaming and record options on HomeKit to Stream & Allow Recording it says that a Home Hub is Required and it doesn't allow me to record and only stream.
@eddiedsuza Жыл бұрын
Aha ... You will need an apple TV or a homepod Mini or a Ipad running as a Hub to run automations as well as run HSV. cheers
@jaredmorse9957 2 жыл бұрын
I’d love to learn how to run Scrypted on the same Raspberry Pi as my Hoobs 👍🏻
@eddiedsuza 2 жыл бұрын
Great suggestion! Will start looking into it. Cheers
@donquixote2206 Жыл бұрын
Thanks for this vid! It let me set up a $30 Wyze v3 on my Home app with an old Raspberry Pi I had sitting around from 6 years ago. Now I can keep an eye on my dogs in the backyard 2 Qs: 1) do you know if Wyze v3 Pro supports the RTSP demo firmware? 2) I can hear through the mic on the camera in the Home app, but I’m not getting the mic button to send audio through the camera speaker in the Home app. Good news is that function works normally in the Wyze app
@eddiedsuza Жыл бұрын
Hello Don .. Glad to know you got them working. Well the Wyze cams dont have talk back. And currently does not support the pro versions due to lack of RTSP support. Cheers
@donquixote2206 Жыл бұрын
@@eddiedsuza again, thanks for all the help I’m not sure exactly what you mean by “talk back”. I set up my v3 (not Pro) with both Wyze’s app and Homebridge. In the Wyze app, there’s a mic button I can use, and audio that I speak Into the phone plays on the speaker of the camera. Confuses my dogs to no end! Just curious if there’s a way to get that function to work with Homebridge and Homebridge camera ui plug in. If not, no worries!
@1csearle 4 күн бұрын
How do you get around 2FA I have a blink camera that has 2FA
@fahadp4440 Жыл бұрын
Hi Eddie, this is truly informative and educational. How can we do a live session ?
@eddiedsuza Жыл бұрын
Yes we can and you can connect with me here calendly.com/eddie-dsouza/schedule-a-30-min-session
@fahadp4440 Жыл бұрын
@@eddiedsuza Thanks brother, I'll do the same.
@babludhiman9512 Жыл бұрын
Can we do same setup on home assistant using NVR
@eddiedsuza Жыл бұрын
I havent tried that yet
@AndyGiagnorio Жыл бұрын
Hi Eddie, many thanx for your awesome work and help you give to us. I have an issue with one of my ezviz camera that i don't know how to resolve. Can you help me? i've 2 ezviz c6n correctly working on homebridge with ezviz plugin, i've installed a new c1c-b with same configuration of the others one. in Home app i see the snapshot but when i go to stream the new camera it goes offline, and homebridge report this: [EZVIZ] STREAM: To ignore this, add a trailing '?' to the map. i don't know how does it mean. Thanx for all and to waste your time. Best regards from Italy.
@eddiedsuza Жыл бұрын
Hello Andy ... please use this website www.ispyconnect.com/camera/ezviz to firstly search for *c1c* and wil see that there are many models that have multiple protocols & path. Please generate a new RTSP link and then use VLC player to test it - to check if the stream works. Thats the way i would do it.
@MitsosXatz 7 ай бұрын
Hello, i bought a tp link tapo tc65. I see the camera to HomeKit but the motion alerts and the recording will only work when the tapo app is installed on iPhone. When I uninstall the app i can open HomeKit and stream the camera but i get no notifications. Is this right or is there any way to make it work without the app? Thank you so much for the help
@eddiedsuza 7 ай бұрын
You will need to access the camera settings in Apple home - under recording - change to stream and record. Under Home settings > go to notifications > enable the notification for the camera
@berndw6475 5 ай бұрын
Hi Eddie, first of all, great and easy to understandable videos. Thx I do have a problem with my Tapo C320WS to get broadcasted to camera.ui oder any other plugin in homebridge. RTSP works and got tested with vlc succesfully. Unfortunately I dont't get the rtsp-stream in camera.ui and therefore in homebridge. Any suggestions of you guys what to do or how to solve that issue? Cheers and thx
@eddiedsuza 4 ай бұрын
Can you check if its broadcasting video as H265 or H264
@Braxton5340 Жыл бұрын
So if I use 4 Reolink Duo 2’s on the outside of my home but I decide to use 2 Lorex Cameras inside my home all over Poe. I should be able to integrate them all regardless of company correct?
@eddiedsuza Жыл бұрын
Thats is Absolutely correct ... Mix and Match - Brands n Models that use the RTSP protocol.
@kiranchandarsa6467 Жыл бұрын
Whether we can stream on apple home from outside of home network.
@eddiedsuza Жыл бұрын
As long as you have a Apple TV or an Homepod mini - then yes you can access the video stream remotely or via a celular network. Cheers
@eddynaime5798 Жыл бұрын
If you have an NVR and wondering how to get the rtsp. There is a direct route to the camera through the NVR and you can find it for your particular NVR by searching for rtsp address for your particular brand NVR. It took quite a bit of research and reading to finally get the rtsp address for my cameras, but once I had that it was smooth sailing....not really. You still need to make sure your homebridge version and the node.jsn is up to date enough to handle camera ui (this was a lot more complicated than just updating). Lots of great tutorials in the homebridge community forum. If you have a uniview dvr here is the rtsp address: •NVR: rtsp:// [USER] : [PASS] @ [ADDRESS] : [RTSP PORT] /unicast/c [CH] /s[STREAM TYPE]/live. Example: rtsp://admin:123456@192.168.1.180:540/unicast/c3/s1/live Where: Address=nvr address on your network, rtsp port is in the network info of your nvr, CH is the number of the camera on your nvr, Stream type is just a number referrering to your main stream (1) or your sub stream (2). Note: Eddie says to enter the info into the stream config- stream source as rtsp_transport tcp -I (rtsp address). That did not work for me unfortunately. I used the template the app suggested which was just -I (rtsp address). Without the stuff at the beginning.
@eddiedsuza Жыл бұрын
Thanks for the tip .. Cheers
@eddynaime5798 Жыл бұрын
@@eddiedsuza thank you for making the video for us to know this was possible. Prior to this my cameras were not in my HK
@eddiedsuza Жыл бұрын
@@eddynaime5798 Your welcome .. Cheers
@hometechreviews8444 5 ай бұрын
I am having trouble getting HomeKit notifications through Camera UI what could I be missing, I'm using an eufy outdoor cam pro
@eddiedsuza 4 ай бұрын
Within Apple Home app > Go to Home Settings > Cameras & Doorbells > Select the camera & enable Acitivity Notifications
@diegoangelini3068 Жыл бұрын
Hi, where can I find the code to add the camera in the Home app after the plugin configuration? Thanks
@eddiedsuza Жыл бұрын
You can click on the homebridge dashboard to get the code
@garys4688 Жыл бұрын
This was great for my Wyze cams! Thanks! Will it work with the old spy ip cams that used the now “nonexistent “ bvcam app?
@eddiedsuza Жыл бұрын
Please refer to this link to know which cams you can generate a RTSP Link www.ispyconnect.com/cameras
@aalkandiry94 Жыл бұрын
Hey Eddie, I swear I could not have done this without you. I fiddled a lot with FFmpeg and cameras-ui with no use, till I found this video and made my life a whole lot easier. So thank you for that and everything else you do on your channel to help us out. However, since I set up the 4 ip cams I have at my home I noticed that my cpu temps are over the roof (+80c) and the CPU load is at +90%. I tried to disable pre-buffering hoping that this will not overwhelm the computer every time I open up the home app on my phone but still.. Is there anything you recommend? And since that I have committed to migrating most of my smart devices to homebridge/homekit, do you recommend that I upgrade to a Raspberry Pi 4? Note: I am currently running a Raspberry Pi 3 B+, which begs my question (Is it gonna make a big difference to upgrade?) Much appreciated pal, cheers 🍻
@eddiedsuza Жыл бұрын
Hey Abdulaziz - Thanks for the compliment ... And its high time you move forward with the base version of Pi 4 or higher ... I recommend the 4 GB variant. It just works with whatever you throw at it. Yes you will see a difference on how your cameras are transcoded and streamed over the network plug everybody will have ample share of the hardware. cheers
@dogarabbas 5 ай бұрын
Good morning Eddie .. My IP camera is H.265 and i don’t see any option to change it to H.264. would it still work for scrypted ? thanks for your help
@eddiedsuza 4 ай бұрын
For Homekit - the option is H264 & 1080p quality
@richardstrange8127 2 жыл бұрын
Is the rtsp_transport needed? And what’s the benefit of using that stream?
@eddiedsuza 2 жыл бұрын
Its an additional configuration and its not needed as the rtsp_transport was added in the video stream plus it tells the plugin that the video link is using the real time transport protocol (RTSP) to decode the feed. Cheers
@bltzrwrnr Жыл бұрын
Hey Eddie - thanks to your videos I have installed homebridge on my Synology NAS and have managed to see 2 Eufy cameras through the Eufy plugin - then I wanted to go ahead and use homebridge camera UI and add all my 4 cameras like you showed in the video using the RTSP stream. I have working rtsp links (checked with VLC) - but I cannot see the videos through the homebridge UI plugin - cameras don't connect (they show up in Home - but not working). Can you help me here?
@eddiedsuza Жыл бұрын
Please check if the cameras are broad casting using the H264 format and also the video size should be at a minimum 1080p
@bltzrwrnr Жыл бұрын
@@eddiedsuza Hey Eddie - many thanks for your quick answer. All this is set (as you mentioned that in the video) - I have the feeling that this again has something to do with the fact, that they are battery powered and they maybe get switched off by the BaseStation. As I am not too programming savvy I will stop the efforts for the Dufy cameras here... many thanks anyways
@eddiedsuza Жыл бұрын
@@bltzrwrnr you're welcome. cheers
@DarkenedBite Жыл бұрын
Is there a way to add Wyze to Homekit without needing to keep the Wyze app? Because if I turn the camera off in the app it seems to not work in Homekit.
@eddiedsuza Жыл бұрын
Hello Archie .... depending on the model ... you can flash the custom firmware and use the RTSP link to connect to HomeKit via Homebridge or Scrypted. Cheers
@ysutysut 9 ай бұрын
Is there any chance to setup cctv with p2p connection by registering with cloud id, similar like if registering the cctv to xmeye mobile apps? I have situation when I plan to add my parent cctv at their home, but cannot using rtsp protocol since the ISP is blocking this service.
@eddiedsuza 9 ай бұрын
RTSP is meant to working locally unless you work with port forwarding etc....
@djcromosoma 9 ай бұрын
I have a NVR, and only can get one camera. It is possible to get all the cameras in the NVR?
@eddiedsuza 9 ай бұрын
Yes it is possible ... Add the RTSP link here and will show you on how it can be done or send the NVR you are trying to expose
@TeeJayKay14 Жыл бұрын
I would love to see a tutorial on scrypted.
@eddiedsuza Жыл бұрын
Hey Thomas - I know have a playlist dedicated for Scrypted kzfaq.info/sun/PLLp4dzLbaS41C-v4BbVq6ys1x1pKiVQky
@harnarinderjitsinghkahlon8873 Жыл бұрын
hey Eddie u have any idea why I am keep getting this error message ( DDE6] The image snapshot handler for the given accessory is slow to respond!)
@eddiedsuza Жыл бұрын
Please try using the VLC to access the camera feed. This checks if your RTSP link is correct. If it works fine ... then ignore the error.
@FinocchiaroG Жыл бұрын
Hey, I have got a Trolink camera with no name, it connects to Tuya App, and I can access the RSTP stream, But the sound doesn't work, I have look everywhere for many years, but I don't know how to access it besides the tuya app u.u. Do you know something I can do about it?
@eddiedsuza Жыл бұрын
Hello Giovanni - may be the camera doesnt support Audio and if the Tuya app does allow it - then it seems the RTSP link is limited with video broadcast only.
@PeteDraperVFX Жыл бұрын
Great video but I fall at the first hurdle (not using an RTSP broadcast). I'm currently using Apple's HomeKit simulator to simulate a security camera running an old USB webcam which adds directly into HomeKit, but it doesn't use Secure Video. Possibly this is as I'm running it on High Sierra, so getting this running instead via RTSP would be useful.. but am unsure of how to broadcast the webcam feed via RTSP - any ideas or recommendations?? I should then be able to follow the rest of the tutorial... :D
@PeteDraperVFX Жыл бұрын
I should elaborate a little - removing the simulator is the best option but I don't know the process to find the right device for the external webcam ( ls -l /dev doesn't give a video result) so using something like VLC which needs the device name to start the RTSP broadcast. Any thoughts to broadcast a regular wired USB webcam via RTSP? Thanks...!
@eddiedsuza Жыл бұрын
Hi pete - i found this to enable RTSP for USB cams (never knew it was possible) - datarhei.github.io/restreamer/docs/guides-usb-camera.html
@PeteDraperVFX Жыл бұрын
@@eddiedsuza great thanks - just managed to get it running on my local Mac but will check it out with the system at home when I get back. I'd heard about restreamer before but for some reason didn't check it. Will report back :)
@PeteDraperVFX Жыл бұрын
@@eddiedsuza argh... seems like the usb cam only works with the linux docker image and not osx so it's not appearing. I could use OBS to stream it to restreamer but that would put a heavy load on the system and consume a lot of power...
@eddiedsuza Жыл бұрын
@@PeteDraperVFX Oh yes ... not worth it. Cheers
@gcassileth 9 ай бұрын
Thank you for the great videos, Eddie. Problem: my cameras are showing live streams in Homekit just fine, but nothing gets recorded in Homekit. Any ideas?
@eddiedsuza 9 ай бұрын
It takes sometime for the timeline to be populated.
@djjluvv 3 ай бұрын
I’m having the same problem its set to stream and record, the little dot is red but nothing is recording after 12 hours😮
@loic4831 2 ай бұрын
Eddie, one more question on Camera UI and HSV if I may ? when I add several cameras, my CPU usages maxes out pretty fast at over 90% .... is there a way to reduce CPU load ? Any suggestions ? Do we have to leave "video analysis" active checked in order to have motion detection or can I uncheck that ? would that reduce CPU load ? Should I set up a lower resolution video for the motion detection in the "video substream" ? If you confirm that would help with CPU, I am really not sure how to do that. Would you know where I can find a tutorial on how to do that ?
@eddiedsuza 2 ай бұрын
The CPU & camera usage goes up to keep in line with Apple HomeKit Secure video requirements - that is take and record a snapshot. This needs some processing by the Pi instead of the camera.
@loic4831 2 ай бұрын
@@eddiedsuza Many thanks Eddie !!
@Robin-jc6ei Жыл бұрын
Hi Eddie, I have the homebridge installed and rstp setup for my Wyze cam years ago. I’ve watched your couple of videos and it seems that you used different kinds of plugins/software to enable the homekit secure video for Wyze cam. Can you tell me what’s the best plug-in to use for Wyze as of now? Is it cameraUI? Thanks in advance!
@eddiedsuza Жыл бұрын
Hello Robin ... yes via the camera ui plugin ...
@Robin-jc6ei Жыл бұрын
@@eddiedsuza so it's better than the method you used in this video? kzfaq.info/get/bejne/m7aiYM5imtnJZnU.html
@alexbird2942 8 ай бұрын
I can't add my Wyze Cam v3 because I think there is an issue with my credentials. The wizard asks for a username, but Wyze uses an email to log in. So how did you configure your login info in the wizard?
@eddiedsuza 8 ай бұрын
You have the create the RTSP credentials within the advanced section. refer to this video - kzfaq.info/get/bejne/oLuCppxm1bfenac.html
@TSAKOPIAKOS 10 ай бұрын
Hi Eddie I have 3 tapo cameras and only 1 is running normally HSV the other 2 just live feed what do you suggest me to do? Thanks✌🏻
@eddiedsuza 10 ай бұрын
Defintely take a look at the HomeKit Secure Video are enabled for the other 2
@eddiedsuza 10 ай бұрын
Defintely take a look at the HomeKit Secure Video are enabled for the other 2
@mattrg3 Жыл бұрын
Wow, you’re awesome; sub’d for sure. Question: What if when adding to Homekit (as you describe near end of video), it says “This accessory has not been certified to work with HomeKit, so some features may not be available.”? It does not give the option to stream and record for me. I just did this, so maybe Apple figured out how to prevent recording from Hoobs/FFmpeg bridge?
@mattrg3 Жыл бұрын
The VLC media player was the breakthrough point for me. It allowed me to make sure I had the network stream dialed-in first. Much appreciated.
@mattrg3 Жыл бұрын
HA! I’m a moron. The entire purpose of this video is to use Camera UI instead of FFmpeg for this exact reason! I was so excited about gettin the video to work, I skipped around and missed it. thanks!!
@mattrg3 Жыл бұрын
Camera UI didn’t work either for Recording in homekit. I’ll keep watching!
@mattrg3 Жыл бұрын
HSV Support (HomeKit Secure Video) is key.
@mattrg3 Жыл бұрын
So, there is not a “Visual” setting for HSV. I went into the script and changed the “hsv”: to true from false. I also completely uninstalled the mmpeg Plugin. I then connected to the bridge which identified the camera in homekit. Works perfectly! If I wasn’t a noob on hoob, this would have gone faster than 40 minutes. Your video is by far the best on youtube! Thank you!
@RichAbe23 7 ай бұрын
I got an authorization failed though I did every step you mentioned here for the Amcrest.
@eddiedsuza 7 ай бұрын
You'll need to check the username and password to access the camera feed via VLC ... If no video loads - check also the assigned IP address
@RichAbe23 7 ай бұрын
Got it to finally work. Thanks.
@eddiedsuza 7 ай бұрын
@@RichAbe23 Lovely ... What was the issue 😅
@crandall903 7 ай бұрын
question dose this work with the wyze og?
@eddiedsuza 6 ай бұрын
If the camera supports RTSP - then it will
@user-us4um2ek4x Ай бұрын
Hi Eddie Thanks for your sharing. I have some issue. My all camera appear in My Apple Home in same network, But I using mobile data when I haven't at home the all camera are No Response. Have a some sloving the problem? Thanks
@eddiedsuza Ай бұрын
You will need a Apple Home Hub such as a Apple TV or HomePod or mini to access your cameras using your celullar conenctivity.
@user-us4um2ek4x Ай бұрын
@@eddiedsuza Thanks. All camera ok.
@sagarvadaliahacks 2 жыл бұрын
@Eddie dSuZA you are genius trust me. lots of hard work and you make it easy for rest of the world dude. Can you tell us does it work with c-100 tapo camera too ?
@eddiedsuza 2 жыл бұрын
Sagar your welcome. Yes the tapo cameras do work using RTSP. Here's the link to generate the links = www.ispyconnect.com/camera/tapo
@sagarvadaliahacks 2 жыл бұрын
@@eddiedsuza thanks and its working like charm :)
@eddiedsuza 2 жыл бұрын
@@sagarvadaliahacks 👏
@philipmancesa5164 2 ай бұрын
Hi Eddie, do you know why my cameras work on Scrypted and not on Camera UI?
@eddiedsuza 2 ай бұрын
Philip this is definitely got to do with configuration and also on what device you are running the camera ui plugin. If its a Mac then you will have an issue with ffmpeg which needs to be mapped to your homebridge install
@vrnicastro6353 Жыл бұрын
Please help!! I can’t find any info on how to unlink the app from a cloud project. It only allows two. I am trying to start fresh. I have two linked cloud projects to my app but no devices show up. I messed up somewhere. Can you help?
@eddiedsuza Жыл бұрын
The Camera UI plugin does not use any cloud projects. Are you referring to Tuya ?
@miranwar 3 ай бұрын
Please provide the website you used for Generic IP Camera configuration
@eddiedsuza 2 ай бұрын
www.ispyconnect.com/cameras
@M13creativemedia Жыл бұрын
Eddie this was very educating. Can you tell me if I can I use Lorex cameras with home kit?
@eddiedsuza Жыл бұрын
Your welcome. Please access the link to generate your RTSP links for the supported Lorex cameras www.ispyconnect.com/camera/lorex
@M13creativemedia Жыл бұрын
great information thankyou. I am definitely going with Home kit now. Also I think I am happy with UniFi Protect system. Watched a couple of your videos I happy with the features.
@eddiedsuza Жыл бұрын
@@M13creativemedia Awesome. Cheers
@Cxrlosrocks Жыл бұрын
hello, it happens to me that after a few hours I start to have a very very long delay of up to almost 1 minute, any solution?
@eddiedsuza Жыл бұрын
Please check the network connection as well as the configuration that is resolution and frame rate
@eddynaime6792 Жыл бұрын
Anyone know how to do this if your cameras are plugged into an NVR? The only Ip address available for access is that of the NVR and not the individual cameras.
@eddiedsuza Жыл бұрын
Hello Eddy .... Please provide the NVR and will send you the link ... its the tail end of the IP address that you need to change the value to every camera starting from 1, 2, 3 , 4 etc
@theque9 Ай бұрын
@@eddiedsuza Hey Eddie! I have the same question if you’re able to assist. RLK8-800D4.
@centeredki69 3 ай бұрын
If I enable audio the live stream in homekit does not work. I get and error "ffmpeg prebuffer process exited with error! (null) - unknown encoder 'libfdk_aac' -: on the status page.
@eddiedsuza 2 ай бұрын
If you are running homebridge on a Mac then you will see the error
@mandeepmails Жыл бұрын
Looks promising, Nice and informative video. Question - Does it send Notifications per se on Telegram when you're away and motion is detected by the camera stream ?
@eddiedsuza Жыл бұрын
Yes you can set them up using telegram plugin and a BOT
@mandeepmails Жыл бұрын
@@eddiedsuza thanks Eddie. You’ve made my day 😀
@eddiedsuza Жыл бұрын
@@mandeepmails Cheers 🍻
@squakerr Жыл бұрын
Olá Eddie! Novamente obrigado pelos vídeos, são de ótima qualidade e muito bem explicados! Tenho o mesmo Synology DS218+ utilizando Homebridge e Scrypted por Docker e estou tendo alguns problemas de otimização de minhas câmeras no Home Kit, são duas reolinks e duas dahua. Sempre que acesso as câmeras pelo aplicativo no Iphone, existe um enorme atraso para carregamento, em torno de 40 segundos e as vezes trava e não carrega, você tem tido estes problemas? Nos aplicativos nativo das cameras tem funcionado perfeitamente, o que parece ser algum problema de configuração dentro do scrypted. Qual tem sido sua preferencia nas questões de uso das cameras, usar o plugin ui.camera direto no homebridge ou scrypted? Obrigado e muito sucesso com o canal!
@eddiedsuza Жыл бұрын
Bom Dia Lucas - com o DS218+ pode usar Scrypted para ter suporte de HSV e boa otimização. Agora sobre atraso - Para os camera - favor reservar os IPs.
@AtifAlmoshadq Жыл бұрын
After following your steps, wyze cam on sonoff ihost bridge realize that the CPUs running so high and I host bridge it’s just losing connection every time, so what’s the problem with that? What is the solution?
@ivansardo7206 Жыл бұрын
Hi Eddie, I did not see in your video if we should select the option "video Analysis" because when I do everything goes fine with the recording, when this is not selected, the recorded from HSV does not work.. it is something related?
@eddiedsuza Жыл бұрын
Hello Ivan ... I didnt select that. I just enabled the HSV option and it works
@ivansardo7206 Жыл бұрын
@@eddiedsuza Thanks in advance for your help and videos!! are awesome!!
@eddiedsuza Жыл бұрын
@@ivansardo7206 your welcome. Cheers 🍻
@pejoeazmi4070 Жыл бұрын
Hello Sir.. Can Tuya Smart Camera integrate with Homebridge?
@eddiedsuza Жыл бұрын
Well if it uses RTSP - Then yes
@jimmybondy1140 2 жыл бұрын
Hi hope you’re OK… Good Video.. Is it for BLINK too? I use the Plugin, but since a few months I can’t stream videos Over Homebridge to HomeKit.. 🤔🤔. 🍻🍻
@eddiedsuza 2 жыл бұрын
Hey Jimmy - I am doing good and yourself ? Well when feeds dont work - you will see the plugin registering some logs and providing information on why its not working. You may want to take a look there to debug the issue
@joshuahaney1135 Жыл бұрын
The RTSP is not working that I get from that website for my camera
@eddiedsuza Жыл бұрын
Please try using the VLC to access the camera feed. This checks if your RTSP link is correct
@loic4831 2 ай бұрын
hello Eddie, thank you for the wonderful video 🙏 Just a quick question please: where do you find the "HomeKit setup code" to enter in home when setting up the camera. you go real quick in your video and dont say where to find this code. many thanks for a quick reply if possible.
@EddieDSouza 2 ай бұрын
Appreciate the comment - please use the same numbers under the QR code that's on the Homebridge dashboard. Cheers
@loic4831 2 ай бұрын
@@EddieDSouzaEddie, wonderful ! many thanks for the super fast reply 🙏 I managed to install my first camera through camera ui and it shows up all good in HomeKit Secure Video ... wonderful !
@eddiedsuza 2 ай бұрын
Awesome thanks .
@maxtimmsforthewin Жыл бұрын
Hi Eddie, Thanks for the video and making our community and smart homes that bit better, as you always do. I am pulling my hair out on this one. I am using Annke I91BM Cameras (They are in H265) and cant seem to get things working. No video shows at all. the cameras add to homekit but also blank. What do i do?
@eddiedsuza Жыл бұрын
Appreciate the feedback. Access the Annke Camera directly using a web browser and change video to H264 ... it should be under video configuration.
@maxtimmsforthewin Жыл бұрын
@@eddiedsuza Hi Eddie! Thank you so so much for getting back to me. You have no idea how much that means! Sadly the camera can only be set to h265 it would seem. Any ideas where to go from here?
@eddiedsuza Жыл бұрын
@@maxtimmsforthewin The only way is - if its within the return window - do it as the only way to stream videos in the apple home app is H264
@maxtimmsforthewin Жыл бұрын
@@eddiedsuza I am still struggling with this. Do you know if there is a way to encode in this system from h265 to h264
@eddiedsuza Жыл бұрын
@@maxtimmsforthewin I am not aware of any other way to recode to h264... If you are within the return window - swap it for another model. The model doesn't support H264
@SanjayPatel-en8fz Жыл бұрын
I was able to add cameras however on homekit, when you open camera, it is not able to play livestream.
@eddiedsuza Жыл бұрын
Hey Sanjay - please check the logs - if there are any errors or kill the Home app and load again.
@aimless_wanderer6264 Жыл бұрын
Thanks that worked. I also enabled recordings however they are not working at all.
@FooHenky Жыл бұрын
Hi eddie, are HOOBS also support HKSV with this plugin
@eddiedsuza Жыл бұрын
Hello Henky - i am not sure if HOOBS 4 supports it - but you can use this plugin to get that HSV feature
@jbgrenouille2527 Жыл бұрын
hi!! excellent videos!! I wanted to ask a question: how can I configure for hombridge if I only have IP cameras? I have 4 IP cameras - IPC-P120-DW thanks advance
@eddiedsuza Жыл бұрын
Hey JB - this video takes you thru the process of adding your IP cams to Homebridge. Cheers
@jbgrenouille2527 Жыл бұрын
@@eddiedsuza Yes ! but you have UI cameras with UI app in my case I have hilook cameras with hikvision app, is it the same procedure?
@eddiedsuza Жыл бұрын
@@jbgrenouille2527 Its the same procedure. The UI camera is the name of the plugin. Cheers
@emieldekkers2245 Жыл бұрын
Hi. I want to add a hikvision ds-2cd3686G2-izs but I get a error… TEST: RTSP stream exited with error (nul) unrecognized option “rstp_transport” error splitting the argument list: option no found. Can u help me…
@eddiedsuza Жыл бұрын
Hello Emiel ... please check if the camera is broadcasting in H264 format and test the RTSP link using VLC player
@TheJaybird95 Жыл бұрын
Question. I have a nest indoor cam. If I want to follow these steps to activate HKSV, would I need to continue to keep my nest subscription active or could I cancel my subscription after configuration? (I use HOOBS by the way)
@eddiedsuza Жыл бұрын
If i am not mistaken - the Nest cams do not use RTSP as the video feeds are broadcasted via an active internet connection using their cloud services. To enable HKSV - you will need to use scrytped and install the nest plugin to get that feature. Now scrypted is another platform that works independantly.
@TheJaybird95 Жыл бұрын
@@eddiedsuza ahhh, okay thank you! Did you ever end up making a video on scrypted? I apologize if you have and I just missed it lol
@eddiedsuza Жыл бұрын
@@TheJaybird95 here you go cheers kzfaq.info/get/bejne/j7tolLKGrbjXfmQ.html
@titothomas78 4 ай бұрын
I have followed your video to view unifi protect cameras in apple home with home bridge , it used to stream when i am out side the home network but now i can only stream in apple home when i am at home why its like this now
@eddiedsuza 4 ай бұрын
You will need a Apple TV or a HomePod mini to view the feeds from a cellular network
@titothomas78 4 ай бұрын
@@eddiedsuza I HAVE IT WAS STREAMING BEFORE BUT SUDDENLY STOPED STREAMING LIVE ONLY WHEN I AM USING MOBILE NETWORK ( means when am out side of home network ) I have apple tv
@alexxinozgz Жыл бұрын
Apparently there is a problem with Camera.UI and homebridge, I got "Error: EACCES: permission denied, mkdir '/homebridge'" and it reboots itself. The directory already exists and the rights are correct... There are more people with this problem in internet. Any solution ? I have tried to reinstall the plugin but when you create some config in the plugin then it doesn't work anymore.
@eddiedsuza Жыл бұрын
Please check this issue and see if it fixes your issue ... github.com/seydx/homebridge-camera-ui/issues/148
@alexxinozgz Жыл бұрын
@@eddiedsuza Thanks for pointing this issue at github. The error you mentioned is about not finding /users folder but in my case it is the /homebridge folder which is the main folder and it is already there! no idea what to do. I will try to create a user called homebridge but i think is not the solution.
@thomasg.8328 10 ай бұрын
Is it possible to record on the synology?
@eddiedsuza 10 ай бұрын
Thru Synology Survellance Station then yes otherwise HomeKit secure video for 10 days
@trongtanle1271 Жыл бұрын
how to put xiaomi camera in homebridge? old generation xiaomi camera not aqara camera
@eddiedsuza Жыл бұрын
Hello Trong. Please check if the cameras can be accessed by RTSP which I have explained the video ... If yes - then by all means they will work.
@AG-go1eo Жыл бұрын
how do i fix a "CAM_4: FFmpeg prebuffer process exited with error! (null) - Unrecognized option 'rtsp_transport'. - Error splitting the argument list: Option not found - " error for wyze cam, the stream does work on vlc
@eddiedsuza Жыл бұрын
Please check the RTSP config via the VLC player
@AG-go1eo Жыл бұрын
@@eddiedsuza I can view the stream in VLC player
@eddiedsuza Жыл бұрын
@@AG-go1eo please remove any sub video configuration and please use the default bit rate / video stream size
@jaimegpppz3552 Жыл бұрын
eddie hole I have a problem with ISPY i did an exercise before and it worked very well ipcamera url, but now my camera model number no longer appears before yes but not today Jennov is the brand of my camera what I do I was stunned my best wishes jaime perez ps you can add the NVR and see the cameras?
@eddiedsuza Жыл бұрын
You can get the RTSP links from this link www.ispyconnect.com/camera/jennov cheers
@bellnaf Жыл бұрын
Can you please share a tutorial for cameras ui with hoobs
@eddiedsuza Жыл бұрын
I'd love too but I no longer do videos using HOOBS as I found issues with plugins like these to work well with HOOBS
@bellnaf Жыл бұрын
Thanks for your response. I agree with you. I got hoobs box but nothing seems to work
@alexgess7265 Жыл бұрын
Hi Eddie! I've been following your videos for a while now, keep it up! I am trying to add 4x Yale CCTV Cameras but they lag and freeze up in stream... I tried lowering the resolution but then the CPU usage was crazy high (I think because it was converting the input with FFMPEG) and would only run two cameras at a time with the others not responding.... I then set everything to 0 to stream the original video feed but now it only updates the picture every 20-30 seconds on the Home App, any suggestions would be highly appreciated :D
@eddiedsuza Жыл бұрын
Please try using a 1080p resolution (which is default in the config) secondly you want to test the RTSP link using the VLC player to ensure the cameras are real time transporting over your network.
@alexgess7265 Жыл бұрын
@@eddiedsuza thank you! I’ll try this.
@alexgess7265 Жыл бұрын
@@eddiedsuza I got it running! I fixed it by turning off video analysis and motion sensors in Homebridge which I didn’t really need. All 4 Camera’s now run on Home-bridge using about 20% of the cpu and smoothly. Thank you for your help.
@eddiedsuza Жыл бұрын
@@alexgess7265 Cheers
@lepastresgentil9447 2 ай бұрын
Hello Eddie , what about a DVR with simple coaxial cable camera, is it the same step ?
@eddiedsuza 2 ай бұрын
Unfortunately not cause its not assigned a IP address from your Router. This video is applicatble for Cameras that broadcast over the network
@lepastresgentil9447 2 ай бұрын
@@eddiedsuza
@lepastresgentil9447 2 ай бұрын
I apologize for being vague in my question. In fact, I'm looking for the RTSP URL of my camera. I can't find it anywhere on the internet. I have 10 cameras of the Hamell brand, model: HW-RH59M. I also read on forums that it was possible to search for the RTSP link using something like Wireshark, but I tried without success. My DVR is connected to my router (JFEYE brand DVR), and I can view my cameras with 4G or Wi-Fi using the JFeye mobile application. I really appreciate it if you can give me an idea of how to find the RTSP link.
@eddiedsuza Ай бұрын
@@lepastresgentil9447 please use this link www.ispyconnect.com/cameras to look for the brand and model to generate the RTSP links
@elibuechler Жыл бұрын
Hi Eddie, love your channel has much interesting content. ~keep up the great job. I think I missed something maybe, don't see how I get the code for HKSV to add my cam. checked through the logs maybe missed it? the username and the password are BOTH case sensitive, took a few hours to work that out for my rtsp stream credentials. might be worth noting!!!
@eddiedsuza Жыл бұрын
The camera ui plugin enables the HSV support ... all you have to do is ensure the RTSP link is working using the VLC player.
@ndwalsh Жыл бұрын
@@eddiedsuza Fab video thanks. I have got my Dahua Camera working in Homebridge & VLC - no problems. However, When I go to add them in apple Home, it sees it, but then asks for the setup code. Where do I find that, Cant see it anywhere?
@Num181 Жыл бұрын
thank you, iam using home assistant, and watched scrypted addon video, and i tried for 2 days its really nice to see homekit features working, but i got a lot of "false" online every little minutes, and iam using WIFI cameras like Ezviz do you think I should buy cameras with an Ethernet cable? I mean is this what affects the disconnection؟! Knowing that when I open the ezviz application, I find that the cameras work well, but they cut off the connection on scrypted or should i use homebridge if its more stable 🙏
@eddiedsuza Жыл бұрын
Please check the wifi connectivity to thees cameras. Either softwares (scrypted or homebridge) - the plugins in certain intervals reach out to the device to capture snapshots. If there are any network connectivity issues - it does take time to load the image as well as the stream. Cabled networked cameras is the best way to go - unless you can do it and its an affordable way to connect all of them.
@Num181 Жыл бұрын
@@eddiedsuza Honestly, I thank you very much, because I got to know Scrypted through your videos. As for the problem that I am facing, I will change the cameras to Ethernet cables. Finally, I have a request. Make a video to explain the sensitivity of the cameras, changing pixels, frame rate, motion threshold and other basic things for setting up the video. I miss this content Thanks
@eddiedsuza Жыл бұрын
@@Num181 Thank you so much for the tip. I am in the tail end of having my home ready ... once I have actual cameras installed around the home - will surely come up with something. Please be patient. Cheers !
@mrgrimmeh 10 ай бұрын
Is IPv6 supported? For example, an IP camera with only an IPv6 address.
@eddiedsuza 10 ай бұрын
Only IPv4 is supported
@jaimegpppz3552 Жыл бұрын
How can I generate a Jennov IP camera URL? otherwise well the VLC It does not recognize the previous URL ip that it does recognize and I could see my cameras I'm totally lost before if it was possible and I have saved the ip URLs what if they worked and now they don't again thank you very much my best wishes James
@eddiedsuza Жыл бұрын
James my friend - please try out this link to generate a RTSP link. www.ispyconnect.com/camera/jennov please select your model and populate the IP, admin and password info
@jaimegpppz3552 Жыл бұрын
@@eddiedsuza Thanks a lot for helping me Eddie I have many problems with the hoobs box I'm already in talks with them I will do it as you indicate thanks, again I don't know if I can buy a RASPBERRY PI with you ready to be able to add the pluying if you can it would be great let me know and we agree I ask you because I'm not very good at this I am learning you young people are very good ok again thank you very much my best wishes jamie
@irineuevora9154 Жыл бұрын
I have a ring doorbell. Having a trouble getting. 1. video stream codecs and audio fram The ring doorbell 2. i-spy. Generating the address. It generates to http instead of rtsp.
@eddiedsuza Жыл бұрын
Hey Irineu ... Since Ring is a cloud based connectivity ... You'll need to use the Ring plugin to connect with HomeKit.
@irineuevora9154 Жыл бұрын
@@eddiedsuza Ok. Thank you.
@coolkidsahib Жыл бұрын
Hey man! Trying to follow this tutorial but my cameras actually have a password. When I use ONVIF device manager to see the cameras, the user is admin and the password is one that I set. How can I input these into camera.ui?
@eddiedsuza Жыл бұрын
Based on the camera model. Use the site to generate the rtsp link www.ispyconnect.com/cameras which includes the IP address as well as the username & password. Then use that generated link in the camera ui config.
@ianmcalister8172 Жыл бұрын
Awesome video! I am getting this error....thoughts on the issue? [9/14/2022, 3:36:43 PM] [CameraUI] ERROR Left: FFmpeg prebuffer process exited with error! (null) - Unrecognized option 'rtsp_transport'. - Error splitting the argument list: Option not found - [9/14/2022, 3:36:43 PM] [CameraUI] Left: Restart prebuffer session..
@eddiedsuza Жыл бұрын
Please check your RTSp link and config... seems like the error is currently pointing there.
@stewartpedler652 Жыл бұрын
@@eddiedsuza I have the same. Works fine in VLC. What else could it be ?
@eddiedsuza Жыл бұрын
@@stewartpedler652 Can you try removing any video sub stream source and use the default configuration thats required for the plugin
@fachannel5665 9 ай бұрын
How do you get the homekit setup code?
@eddiedsuza 9 ай бұрын
Go to homebridge dashboard and use the same code you see there
@TheH3R0x 11 ай бұрын
I'm wondering. Is there some option to do it on Home Assistant?
@eddiedsuza 11 ай бұрын
Yes you can add it via RTSP. However for HSV support - you will need this plugin or scrypted (i did a video to include the addon)
@TheH3R0x 11 ай бұрын
@@eddiedsuza Thank you :)
Gufee.medalin
Рет қаралды 8 МЛН
Learn Fast Make Things
Рет қаралды 2,2 М.
George Langabeer
Рет қаралды 10 М.