Homemade Electric Longboard - what NOT to do | attempt 1
Рет қаралды 40,518
5 жыл бұрынDIY Electric Skateboard Kit Parts Pulleys And Motor Mount -- goo.gl/ezNLYs
N5065 400KV 1820W Outrunner Brushless Motor -- goo.gl/VDa37W
Racerstar 120A ESC Brushless Waterproof Sensorless -- goo.gl/4ibzKJ
Mini 2.4Ghz Wireless Remote Controller With Receiver -- goo.gl/APj2PE
More Electric Scooter Parts -- goo.gl/3dusVY
The longboard is not yet ready. Stay tuned for the final part where I'll make my case and test the speed, power, and quality of the parts.
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.com/eng_preguntas...
Canal en Español: / electronoobs en español
PRINTERS
-------------------------------------
Alfawise U30 (150€): www.gearbest.com/3d-printers-...
Coupon: "GB3DU30"
Ender 3(155€ AMAZING): www.gearbest.com/3d-printers-...
Creality CR20: www.gearbest.com/3d-printers-...
Coupon: "72HCR20"
Crealitu CR10 (328€): www.gearbest.com/3d-printers-...
Coupon: "GB3D1201"
Crealitu CR10S (372€): www.gearbest.com/3d-printers-...
Coupon: "GBCR10STY" or "GBCR10STY"
Creality CR10-mini (287€): www.gearbest.com/3d-printers-...
Tevo Tornado (289€): www.gearbest.com/3d-printers-...
Anycubic i3 MEGA (287€): www.gearbest.com/3d-printers-...
Tronxy X5SA (313€): www.gearbest.com/3d-printers-...
Geetech E180 (235€): www.gearbest.com/3d-printers-...
Anet A8 (180€): www.gearbest.com/3d-printers-...
Tevo Tarantula (180€): www.gearbest.com/3d-printers-...
FLsun-S (461€): www.gearbest.com/3d-printers-...
SaprkMaker (217€): www.gearbest.com/3d-printers-...
-----------------LINKS-------------------
Tutorial website: www.electronoobs.com/eng_robo...
Components list: Tutorial website: www.electronoobs.com/eng_robo...
Schematic: Tutorial website: www.electronoobs.com/eng_robo...
PWM Arduino code:Tutorial website: www.electronoobs.com/eng_robo...
6S Battery pack video: • Homemade 6S Battery Pa...
Like share and subscribe to motivate me. Thank you
#Electric #longboard #radio
@moliata 5 жыл бұрын
I waited for this project for so long, from when you mentioned it in your BMS video. I wanted to build an electric longboard myself, so this was just a perfect video, thanks!
@JamyGeorgesLeFou 5 жыл бұрын
I'm actually building a similar longboard right now! Cool project!
@Huebel01 5 жыл бұрын
I have a few suggestions for you to consider: RC Car Brushless ESCs usually have a lot of programmable features. In your case it would be ideal to disable the brake option, as well as the reverse function and maybe adjust the startup power. That way you can skip the arduino. Also when using the arduino, i would add a potentiometer to easily adjust the throttle delay. Cool project thou,
@ELECTRONOOBS 5 жыл бұрын
Thank you!
@sebastiansombra 5 жыл бұрын
You can do that with a program card. They are cheap
@felipegross 5 жыл бұрын
@@sebastiansombra you can usually do that with the radio. No need for the cards
@AmaliePreecha Жыл бұрын
@@felipegross radio?
@felipegross Жыл бұрын
@@AmaliePreecha Radio controller = radio transmitter = TX
@melnedgars7273 5 жыл бұрын
7:29 thats exactly what happened to me :D I learned it the HARD WAY :D
@hemantmundhe6662 5 жыл бұрын
Nice and hard work we waiting for next video to complete modifications.
@umarasghar8454 5 жыл бұрын
Nice.👍👍 Looking forward to making one
@isaaclyonsf1 5 жыл бұрын
I'm building mine at the moment. To avoid extensive grinding it's best to choose trucks that stay largely the same diameter across their length.
@sbuysgm 5 жыл бұрын
good vid. put the other motor on the other side of the same shaft. left wheel motor behind the wheel, right wheel motor in front of wheel. motor size won't matter and you should not need to reverse wire one motor
@Fungineers 5 жыл бұрын
Excellent. I built a similar one!
@JosephAlukka 5 жыл бұрын
Love the project and how you creatively pulled it together, however, I have a few things to point out and some suggestions for you: > Use Silicon wires rated for the current you are drawing. The plastic PC wires are not rated for the surge current on RC applications and will heat up causing it to melt and possibly start a fire. Silicon wires are cheap and will not melt and short circuit even if you accidentally overload the system. >That power switch is probably rated for 6A peak and 2A continuous, it will melt soon and give you weird problems, so please switch to a heavier duty switch as I'm pretty sure that circuit is way over 30A on load. Never try to save money on wires and switches for heavy current applications! >Instead of grinding off the shaft support on the wheel mount and making it weak, it would have been better to drill the motor mount as much as you can and then grind the shaft to make it fit. >The method of mounting the sprocket to the motor shaft is a poor design from the manufacturer using 2/3 set screws on a round shaft, you should switch to a shaft and sprocket with a keyway design or a shaft with a flat spot on one side for the set screws to bite on, even which comes loose. Loctite it for sure! >And like everyone pointed out with the programmable ESC, there are lots of custom firmware available for them as most of them are ATMEL and ST micros, you could flash them and have it your way with no brake unless you pull it in reverse for braking. And since you are using a nano, you can use it to power on the ESC by connecting the power switch to a pin on the nano with a proper circuit and turning it on in void setup :) But overall, this looks like a very satisfying project with excellent outcome!
@abdul.rahim.k 5 жыл бұрын
Informative,interesting....and yet simple...!!!💕💕💕💕
@SamratDutta 5 жыл бұрын
Great video bro...
@barrymayson2492 5 жыл бұрын
I would look at mounting the motor on the top of the board as altering the shaft width may weaken it to much. Or change the truck mounts.
@TuttleScott 5 жыл бұрын
I'd put a little blue lock tight on those belt pulley screws too.
@bonnyxavier7661 4 жыл бұрын
Hi can you explain why the motor power rating is so high? I did some calculations and it seems like nothing more than 500W is necessary? If would be great if you explain how chose this motor. Thanks!
@clee2423 5 жыл бұрын
for a case, you probably can use 2 case that placed at front side and back side, and let the middle free, so the longboard can flex
@shahzaibshamim6524 5 жыл бұрын
Would you make an inverted pendulum?
@fizzy5558 2 жыл бұрын
I have made a very similar longboard, but your code is not working for me, i've checked over it a million times, tried a simpliar code but still nothing. Without the arduino nano the motor works, but same as for you it stalls when trying to brake, any ideas?
@johnmounger2789 2 жыл бұрын
Do you have a link to the 3-D printed box file? That would be really helpful
@lukandros 5 жыл бұрын
You can adjust the motor break in the ESC don’t need Arduino.
@gamermixer7953 3 жыл бұрын
With a vesc or any ESC ?
@lukandros 3 жыл бұрын
GAmer MIxer any ESC.
@gamermixer7953 3 жыл бұрын
@@lukandros thx !
@steebbo9460 3 жыл бұрын
How please....
@lukandros 3 жыл бұрын
@@steebbo9460 you can check the ESC manual. Bcs it changes for each ESC
@user-nq5hy7vn9k 5 жыл бұрын
hey Electronoob, can you please make a update video on the brushed arduino drone. I would love to make the smaller version of the drone. So Can you please update us on the brushed drone which you were making.
@SidneyCritic 5 жыл бұрын
How close are the motor speeds when you have 2, because you could put 1 on front of the axle and 1 behind. If the speeds are different maybe 1 on the front axle and 1 on the rear, but both on the same side, eg right-hand side.
@misterbadguy99 5 жыл бұрын
idk about that motor mount mate. You may want to change how it attaches to the axle of the long board. Like a system that can take more torque would be good.
@45llamas 4 жыл бұрын
7:19 is it nessesary the arduino because that hard braking is a built in brake from the ESC
@MCsCreations 5 жыл бұрын
Fantastic work, dude! It's looking good! 😃
@matejbartos8821 4 жыл бұрын
Hi, I know this video is old, but could you please update the parts list since some of them are not being offered anymore...
@yonelaposwa4932 5 жыл бұрын
May I ask a question? I just wanted to ask why you didn't try using one of the ESCs you made in your previous videos? Love the channel btw. Keep it up
@mafiiiyo6613 3 жыл бұрын
What is the fan used for please..?
@ManyuFajar 2 ай бұрын
Could i change the esc with microntroller?
@huusarn 5 жыл бұрын
use a vesc!
@clee2423 5 жыл бұрын
you can put both motors at the back and front, so balancing the torque ?
@enjoyesk8978 4 жыл бұрын
Seraph sure but it’s not necessary.
@shahzaibshamim6524 5 жыл бұрын
Please do a tutorial series on ESP32.
@vishal01mehra 5 жыл бұрын
How about welding motor holder with the truck?
@yigitgenc1734 4 жыл бұрын
Could this motor be used for an ebike? I mean its strong
@azimalif266 2 жыл бұрын
You can add 2 motors by adding one in either side of the truck.
@amkp40technology 5 жыл бұрын
Super creator you 👍👍👌👌👏👏
@MicrotechSAT 4 жыл бұрын
place the motor on the back, i mean, to use dual motor if you dont hace space, place 1 on front and one inverted on the back
@Aman-gn1oz 4 жыл бұрын
Hey you can use the other motor on the front wheel...and it would be insanely fast
@IlRossoNerd 5 жыл бұрын
wooo i like it!!
@easyelectronics4364 5 жыл бұрын
Hey bro please explain the circuit of your smart watch please🙏🙏
@tonyvarghese75 5 жыл бұрын
Nice
@yentecool9787 5 жыл бұрын
You should use off-road tires, they are bigger and you can drive on damaged roads with them
@carlosfarfan4738 5 жыл бұрын
Lo puedes hacer pero en tu canal en español
@kaumohlamonyane272 5 жыл бұрын
Oh. But getting new trucks is not a problem
@nath.o. 5 жыл бұрын
Nice project! But don't forget the rules for public using!
@aqak4772 5 жыл бұрын
好极了！
@sfp4197 5 жыл бұрын
I will make a 1.5 kw ajustable lab power suplly
@facehunter504 4 жыл бұрын
Mario just told me how to put together a skateboard lol
@originalmianos 5 жыл бұрын
You can use the ESC programmer to do everything you put the Arduino in for. m.banggood.com/Racerstar-LED-Program-Card-For-25354560A-ESC-Motor-Set-p-1057127.html
@znachittac5887 5 жыл бұрын
с того как ты ось сточил ржали всем домом, удачно разложится об асфальт
@hcildwold1751 4 жыл бұрын
400kv, why you say there's torque? Impossible.
@jeelansoni2866 5 жыл бұрын
what is max speed
@dhruvchikhaliya3464 5 жыл бұрын
I like it.
@TotanDas1991 5 жыл бұрын
Power in one wheel is not good for steering the board will tend to steer in the opposite site continuously but I am not sure. Plz, mention that topic in the final video. It's a good project and like your videos keep doing like this project.
@raghavsrivastava2910 5 жыл бұрын
Saturday....
@ELECTRONOOBS 5 жыл бұрын
Stay tuned for tomorrow as well! ;)
@AtariKafa 5 жыл бұрын
lets hope we will have 10x faster 3d printers in 2019
@sobakinvolkin4993 5 жыл бұрын
Ahah perfect english
@ELECTRONOOBS 5 жыл бұрын
Follow me on FACEBOOK: facebook.com/Electronoobs
@kastelvani7259 4 жыл бұрын
I think 400kv will be too mutch for 6s
@fabiotravagli1008 5 жыл бұрын
i advice to weld the suport of the motor
@exshvezdickou 5 жыл бұрын
Buy yourself phillips screwdriver please. My eyes hurts :)
@addiction-69 5 жыл бұрын
Noob make a push button or digital volume control circuit.....
@SAI_LINGESH 5 жыл бұрын
Why do you always you keep a banana 🍌 in your work bench? What's the purpose of keeping it?
@Huebel01 5 жыл бұрын
sai lingesh Raghunathan „Banana for scale“ 😉
@emiliomota2459 5 жыл бұрын
It is a joke of 9gag
@startobytes 3 жыл бұрын
Great Video, but i only have 23 subs :(
@sergeysanych122 5 жыл бұрын
Нафига банан в кадре?
@marcobastoy7032 5 жыл бұрын
Can I eat that banana,,,,,,,
@AThreeDogNight 5 жыл бұрын
You need a clutch for your motor, & then it can free spin.
@nath.o. 5 жыл бұрын
Did you mean a free run like in some rc model on the front axel? I think this is the better way then a clutch. But don't forget the possibility to break! With the free run you can not break!
@AThreeDogNight 5 жыл бұрын
@@nath.o. Yes, that is what I meant, thank you.
@007hansen 5 жыл бұрын
@@AThreeDogNight it seems like saving the clutch and investing into clever ESC'ing with recuperation is the way to go imho.
@hanzohasashi1669 3 жыл бұрын
Bruh.. i want to hear the situation sound of the motor, when you turning on.. not your annoying voice.. sorry
Marusya Outdoors
Рет қаралды 220 МЛН
Eben Kouao
Рет қаралды 33 М.
Joop Brokking
Рет қаралды 123 М.
Oren's Projects
Рет қаралды 292 М.