Homemade Lathe #7 | Cheap Digital Readout

Рет қаралды 46,509

2 жыл бұрын

In this Video i will upgrading my homemade lathe
If you want to support me, you can use this Amazon link for your normal shopping: amzn.to/3QWp2yj
you don't pay more, but I get a small commission for every purchase. Thanks :D
The complete Playlist: • Homemade Lathe
The Start (Part 1): • Homemade Metal Lathe #1
Bilding the Base & Motor Mount (Part 2): • Homemade Metal Lathe #...
Assamble & Painting (Part 3): • Homemade Metal Lathe #...
Final Assamble & Test (Part 4): • Homemade Lathe #4 | In...
Building the Tailstock (Part 5): • Homemade Lathe #5 | Bu...
Finish & Test the Tailstock (Part 6): • Homemade Lathe #6 | Fi...
Thank You for Watching :D

Пікірлер: 30

@dexter1448 Жыл бұрын

If you want to support me, you can use this Amazon link for your normal shopping: amzn.to/3QWp2yj you don't pay more, but I get a small commission for every purchase. Thanks :D

@bradpage8967 2 жыл бұрын

Those hardened stainless steel calipers can be drilled with a carbide drill. If you don’t have a spade or twist drill a carbide tipped masonry bit with the tip sharpened will do the job (and they are cheap!) or you can notch the piece as you did. Inexpensive digital readout that functions every bit as good as a high dollar unit! Awesome!!

@gregphillips.1312 2 жыл бұрын

Awesome! I'm a Turner/Fitter by Trade, but I'm now a self employed Handyman. I have a Pillar Drill that I've just added a cheap 2 axis Table to, this would be a far more accurate way of using that 😁

@GBWM_CNC 2 жыл бұрын

Great upgrade!

@sergeyd.6759 2 жыл бұрын

Молодец. Отличный полноценный станок получилось👍

@dexter1448 2 жыл бұрын

Thanks 😁

@jcmaosaobra2791 2 жыл бұрын

very good congratulations, to drill such hard steel you need a very small speed and a little patience

@rossideas5884 2 жыл бұрын

amazing 👏

@zenonbinkowski7201 2 жыл бұрын

Ciekawe rozwiązanie, Pozdrawiam z Polski.

@cherpiu5842 Жыл бұрын

Te pasaste ,Master capo.

@carpinteriabrians 2 жыл бұрын

Hola q bueno q ya lo publicaste estaba esperando este video yo también estoy haciendo el mio

@jean-pierrepetit3229 4 ай бұрын

bonjour ou je peut trouver les arrêt de raille linéaire avec les vis noire de blocage que vous avait en bout de votre chariot sur raille comment sa s appelle et sur quelle site les trouvait merci

@JWAM 2 жыл бұрын

I had to watch all of your lathe-videos in one go. Now I want to make my own. :) Very good stuff. I have one question, why is the cross-sled so long, considering that one would only ever want to use tooling on the front side of the chuck. Is it to use the lathe as a mill instead?

@dexter1448 2 жыл бұрын

Thanks, Jes, so i have a clamp plate with a size of 20x30cm with 20cm cross-sled travel which is great if i want to upgrade my lathe to a milling machine... Also its good if you want to clamp other stuff on the plate. Like now I have to mill a T-nut for a shaft... So i can clamp an endmill in the 3 Jaw chuck and the shaft on the plate... I hope you can understand my English ;D Greedings from Deutschland

@JWAM 2 жыл бұрын

@@dexter1448 English is good enough to understand. :) I think I want to make a simple but sturdy metal lathe following your design and make it into a CNC-lathe instead.

@dexter1448 2 жыл бұрын

@@JWAM good Idea!

@dexter1448 2 жыл бұрын

I recoment visit his Channel, he build also an CNC Lathe: kzfaq.info

@JWAM 2 жыл бұрын

@@dexter1448 excellent, thank you for that! Oh, one more question, the linear guides.. are they aluminium with steel rod on top, or are they solid steel?

@rossideas5884 2 жыл бұрын

respect